From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: Sebastian Reichel <sebastian.reichel@collabora.com>,
Sebastian Reichel <sre@kernel.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tony Lindgren <tony@atomide.com>,
Merlijn Wajer <merlijn@wizzup.org>,
"H. Nikolaus Schaller" <hns@goldelico.com>,
Rob Herring <robh@kernel.org>, <linux-omap@vger.kernel.org>,
<dri-devel@lists.freedesktop.org>, <kernel@collabora.com>
Subject: Re: [PATCHv2 04/56] omap/drm: drop unused dsi.configure_pins
Date: Wed, 25 Mar 2020 14:45:38 +0200 [thread overview]
Message-ID: <00049146-9e70-8345-4691-eb2e9aa9f02a@ti.com> (raw)
In-Reply-To: <20200224232126.3385250-5-sebastian.reichel@collabora.com>
On 25/02/2020 01:20, Sebastian Reichel wrote:
> The panel-dsi-cm's ddata->pin_config is always NULL, so this
> callback is never called. Instead the DSI encoder gets the pin
> configuration directly from DT.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
> drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 11 -----------
> drivers/gpu/drm/omapdrm/dss/dsi.c | 1 -
> drivers/gpu/drm/omapdrm/dss/omapdss.h | 2 --
> 3 files changed, 14 deletions(-)
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2020-03-25 12:46 UTC|newest]
Thread overview: 113+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-24 23:20 [PATCHv2 00/56] drm/omap: Convert DSI code to use drm_mipi_dsi and drm_panel Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 01/56] ARM: dts: omap: add channel to DSI panels Sebastian Reichel
2020-02-24 23:38 ` Laurent Pinchart
2020-02-25 0:01 ` Sebastian Reichel
2020-02-27 20:09 ` Sam Ravnborg
2020-02-24 23:20 ` [PATCHv2 02/56] ARM: dts: omap4-droid4: add panel compatible Sebastian Reichel
2020-02-24 23:37 ` Laurent Pinchart
2020-02-24 23:47 ` Tony Lindgren
2020-02-27 22:10 ` Laurent Pinchart
2020-02-28 15:34 ` Tony Lindgren
2020-02-24 23:57 ` Sebastian Reichel
2020-02-27 20:10 ` Sam Ravnborg
2020-02-24 23:20 ` [PATCHv2 03/56] Revert "drm/omap: dss: Remove unused omap_dss_device operations" Sebastian Reichel
2020-03-25 12:42 ` Tomi Valkeinen
2020-02-24 23:20 ` [PATCHv2 04/56] omap/drm: drop unused dsi.configure_pins Sebastian Reichel
2020-02-24 23:42 ` Laurent Pinchart
2020-02-26 21:28 ` Sebastian Reichel
2020-02-26 21:36 ` Laurent Pinchart
2020-02-26 22:25 ` Sebastian Reichel
2020-03-25 12:45 ` Tomi Valkeinen [this message]
2020-02-24 23:20 ` [PATCHv2 05/56] drm/omap: dsi: use MIPI_DSI_FMT_* instead of OMAP_DSS_DSI_FMT_* Sebastian Reichel
2020-02-25 13:58 ` Laurent Pinchart
2020-02-26 21:25 ` Sebastian Reichel
2020-03-25 12:52 ` Tomi Valkeinen
2020-02-24 23:20 ` [PATCHv2 06/56] drm/omap: constify write buffers Sebastian Reichel
2020-02-25 14:13 ` Laurent Pinchart
2020-03-25 12:53 ` Tomi Valkeinen
2020-02-24 23:20 ` [PATCHv2 07/56] drm/omap: dsi: add generic transfer function Sebastian Reichel
2020-02-25 14:16 ` Laurent Pinchart
2020-03-25 13:05 ` Tomi Valkeinen
2020-02-24 23:20 ` [PATCHv2 08/56] drm/omap: panel-dsi-cm: convert to transfer API Sebastian Reichel
2020-02-25 14:52 ` Laurent Pinchart
2020-02-26 22:12 ` Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 09/56] drm/omap: dsi: unexport specific data transfer functions Sebastian Reichel
2020-02-25 14:53 ` Laurent Pinchart
2020-02-24 23:20 ` [PATCHv2 10/56] drm/omap: dsi: drop virtual channel logic Sebastian Reichel
2020-02-25 15:01 ` Laurent Pinchart
2020-04-01 11:30 ` Tomi Valkeinen
2020-04-01 11:33 ` Laurent Pinchart
2020-04-01 11:43 ` Tomi Valkeinen
2020-02-24 23:20 ` [PATCHv2 11/56] drm/omap: dsi: simplify write function Sebastian Reichel
2020-02-25 15:31 ` Laurent Pinchart
2020-02-26 22:46 ` Sebastian Reichel
2020-02-26 22:48 ` Laurent Pinchart
2020-02-24 23:20 ` [PATCHv2 12/56] drm/omap: dsi: simplify read functions Sebastian Reichel
2020-02-25 16:20 ` Laurent Pinchart
2020-02-24 23:20 ` [PATCHv2 13/56] drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg Sebastian Reichel
2020-02-25 16:30 ` Laurent Pinchart
2020-02-26 23:34 ` Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 14/56] drm/omap: dsi: introduce mipi_dsi_host Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 15/56] drm/omap: panel-dsi-cm: use DSI helpers Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 16/56] drm/omap: dsi: request VC via mipi_dsi_attach Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 17/56] drm/omap: panel-dsi-cm: drop hardcoded VC Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 18/56] drm/omap: panel-dsi-cm: use common MIPI DCS 1.3 defines Sebastian Reichel
2020-04-01 12:09 ` Tomi Valkeinen
2020-02-24 23:20 ` [PATCHv2 19/56] drm/omap: dsi: drop unused memory_read() Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 20/56] drm/omap: dsi: drop unused get_te() Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 21/56] drm/omap: dsi: drop unused enable_te() Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 22/56] drm/omap: dsi: drop useless sync() Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 23/56] drm/omap: dsi: use pixel-format and mode from attach Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 24/56] drm/omap: panel-dsi-cm: use bulk regulator API Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 25/56] drm/omap: dsi: lp/hs switching support for transfer() Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 26/56] drm/omap: dsi: move TE GPIO handling into core Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 27/56] drm/omap: dsi: drop custom enable_te() API Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 28/56] drm/omap: dsi: do bus locking in host driver Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 29/56] drm/omap: dsi: untangle ulps ops from enable/disable Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 30/56] drm/dsi: add MIPI_DSI_MODE_ULPS_IDLE Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 31/56] drm/omap: dsi: do ULPS in host driver Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 32/56] drm/omap: dsi: move panel refresh function to host Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 33/56] drm/omap: dsi: Reverse direction of the DSS device enable/disable operations Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 34/56] drm/omap: dsi: drop custom panel capability support Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 35/56] drm/omap: dsi: convert to drm_panel Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 36/56] drm/omap: drop omapdss-boot-init Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 37/56] drm/omap: dsi: implement check timings Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 38/56] drm/omap: panel-dsi-cm: use DEVICE_ATTR_RO Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 39/56] drm/omap: panel-dsi-cm: support unbinding Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 40/56] drm/omap: panel-dsi-cm: fix remove() Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 41/56] drm/omap: dsi: return proper error code from dsi_update_all() Sebastian Reichel
2020-04-01 12:23 ` Tomi Valkeinen
2020-02-24 23:21 ` [PATCHv2 42/56] drm/omap: remove global dss_device variable Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 43/56] drm/omap: bind components with drm_device argument Sebastian Reichel
2020-02-27 0:32 ` Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 44/56] drm/panel: Move OMAP's DSI command mode panel driver Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 45/56] drm/omap: dsi: Register a drm_bridge Sebastian Reichel
2020-02-25 11:50 ` [PATCHv2.1 " Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 46/56] drm/omap: remove legacy DSS device operations Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 47/56] drm/omap: remove unused omap_connector Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 48/56] drm/omap: simplify omap_display_id Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 49/56] drm/omap: drop unused DSS next pointer Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 50/56] drm/omap: drop empty omap_encoder helper functions Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 51/56] drm/omap: drop DSS ops_flags Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 52/56] drm/omap: drop dssdev display field Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 53/56] drm/omap: simplify DSI manual update code Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 54/56] ARM: omap2plus_defconfig: Update for moved DSI command mode panel Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 55/56] drm/panel/panel-dsi-cm: support rotation property Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 56/56] ARM: dts: omap4-droid4: add panel orientation Sebastian Reichel
2020-02-25 0:10 ` [PATCHv2 00/56] drm/omap: Convert DSI code to use drm_mipi_dsi and drm_panel Tony Lindgren
2020-02-25 2:28 ` Sebastian Reichel
2020-02-25 15:42 ` Tony Lindgren
2020-02-25 23:01 ` Sebastian Reichel
2020-02-25 23:06 ` Laurent Pinchart
2020-02-25 23:09 ` Tony Lindgren
2020-02-25 23:52 ` Sebastian Reichel
2020-02-26 12:20 ` Tomi Valkeinen
2020-02-25 11:53 ` [PATCHv2 57/56] dt-bindings: display: panel-dsi-cm: convert to YAML Sebastian Reichel
2020-02-27 20:35 ` Sam Ravnborg
2020-02-27 22:08 ` Laurent Pinchart
2020-02-26 12:28 ` [PATCHv2 00/56] drm/omap: Convert DSI code to use drm_mipi_dsi and drm_panel Tomi Valkeinen
2020-02-27 0:28 ` Sebastian Reichel
2020-03-25 12:47 ` Tomi Valkeinen
2020-03-25 13:03 ` Laurent Pinchart
2020-04-01 12:43 ` Tomi Valkeinen
2020-06-25 13:07 ` H. Nikolaus Schaller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00049146-9e70-8345-4691-eb2e9aa9f02a@ti.com \
--to=tomi.valkeinen@ti.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=hns@goldelico.com \
--cc=kernel@collabora.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-omap@vger.kernel.org \
--cc=merlijn@wizzup.org \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).