linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Aaro Koskinen <aaro.koskinen@iki.fi>
To: linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>,
	linux-input@vger.kernel.org,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>
Subject: [RESEND PATCH v3 4/4] input: misc: introduce retu-pwrbutton
Date: Mon, 12 Nov 2012 21:08:45 +0200	[thread overview]
Message-ID: <1352747326-2195-5-git-send-email-aaro.koskinen@iki.fi> (raw)
In-Reply-To: <1352747326-2195-1-git-send-email-aaro.koskinen@iki.fi>

Add Retu power button driver.

Cc: linux-input@vger.kernel.org
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/misc/Kconfig          |   10 ++++
 drivers/input/misc/Makefile         |    1 +
 drivers/input/misc/retu-pwrbutton.c |  102 +++++++++++++++++++++++++++++++++++
 3 files changed, 113 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/misc/retu-pwrbutton.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7c0f1ec..e5be189 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -367,6 +367,16 @@ config INPUT_CM109
 	  To compile this driver as a module, choose M here: the module will be
 	  called cm109.
 
+config INPUT_RETU_PWRBUTTON
+	tristate "Retu Power button Driver"
+	depends on MFD_RETU
+	help
+	  Say Y here if you want to enable power key reporting via the
+	  Retu chips found in Nokia Internet Tablets (770, N800, N810).
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called retu-pwrbutton.
+
 config INPUT_TWL4030_PWRBUTTON
 	tristate "TWL4030 Power button Driver"
 	depends on TWL4030_CORE
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 83fe6f5..4fbee0d 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY)	+= pmic8xxx-pwrkey.o
 obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
 obj-$(CONFIG_INPUT_PWM_BEEPER)		+= pwm-beeper.o
 obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
+obj-$(CONFIG_INPUT_RETU_PWRBUTTON)	+= retu-pwrbutton.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
diff --git a/drivers/input/misc/retu-pwrbutton.c b/drivers/input/misc/retu-pwrbutton.c
new file mode 100644
index 0000000..043a12b
--- /dev/null
+++ b/drivers/input/misc/retu-pwrbutton.c
@@ -0,0 +1,102 @@
+/*
+ * Retu power button driver.
+ *
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Original code written by Ari Saastamoinen, Juha Yrjölä and Felipe Balbi.
+ * Rewritten by Aaro Koskinen.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/retu.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#define RETU_STATUS_PWRONX (1 << 5)
+
+static irqreturn_t retu_pwrbutton_irq(int irq, void *_pwr)
+{
+	bool state;
+	struct input_dev *idev = _pwr;
+	struct retu_dev *rdev = input_get_drvdata(idev);
+
+	state = !(retu_read(rdev, RETU_REG_STATUS) & RETU_STATUS_PWRONX);
+	input_report_key(idev, KEY_POWER, state);
+	input_sync(idev);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit retu_pwrbutton_probe(struct platform_device *pdev)
+{
+	struct retu_dev *rdev = dev_get_drvdata(pdev->dev.parent);
+	struct input_dev *idev;
+	int ret;
+
+	idev = input_allocate_device();
+	if (!idev)
+		return -ENOMEM;
+
+	idev->evbit[0]				= BIT_MASK(EV_KEY);
+	idev->keybit[BIT_WORD(KEY_POWER)]	= BIT_MASK(KEY_POWER);
+	idev->name				= "retu-pwrbutton";
+
+	platform_set_drvdata(pdev, idev);
+	input_set_drvdata(idev, rdev);
+
+	ret = input_register_device(idev);
+	if (ret < 0) {
+		input_free_device(idev);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, platform_get_irq(pdev, 0),
+					NULL, retu_pwrbutton_irq, 0,
+					"retu-pwrbutton", idev);
+	if (ret < 0)
+		input_unregister_device(idev);
+
+	return ret;
+}
+
+static int __devexit retu_pwrbutton_remove(struct platform_device *pdev)
+{
+	struct input_dev *idev = platform_get_drvdata(pdev);
+
+	disable_irq(platform_get_irq(pdev, 0));
+	input_unregister_device(idev);
+
+	return 0;
+}
+
+static struct platform_driver retu_pwrbutton_driver = {
+	.probe		= retu_pwrbutton_probe,
+	.remove		= __devexit_p(retu_pwrbutton_remove),
+	.driver		= {
+		.name	= "retu-pwrbutton",
+		.owner	= THIS_MODULE,
+	},
+};
+module_platform_driver(retu_pwrbutton_driver);
+
+MODULE_ALIAS("platform:retu-pwrbutton");
+MODULE_DESCRIPTION("Retu Power Button");
+MODULE_AUTHOR("Ari Saastamoinen");
+MODULE_AUTHOR("Felipe Balbi");
+MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
+MODULE_LICENSE("GPL");
-- 
1.7.2.5

      parent reply	other threads:[~2012-11-12 19:08 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-12 19:08 [RESEND PATCH v3 0/4] cbus/retu drivers Aaro Koskinen
     [not found] ` <1352747326-2195-1-git-send-email-aaro.koskinen-X3B1VOXEql0@public.gmane.org>
2012-11-12 19:08   ` [RESEND PATCH v3 1/4] i2c: introduce i2c-cbus driver Aaro Koskinen
2012-11-16 11:30     ` Wolfram Sang
2012-11-12 19:08 ` [RESEND PATCH v3 2/4] mfd: introduce retu-mfd driver Aaro Koskinen
2012-11-20 18:34   ` Tony Lindgren
2012-11-20 18:38     ` Tony Lindgren
2012-11-12 19:08 ` [RESEND PATCH v3 3/4] watchdog: introduce retu_wdt driver Aaro Koskinen
2012-11-12 19:08 ` Aaro Koskinen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1352747326-2195-5-git-send-email-aaro.koskinen@iki.fi \
    --to=aaro.koskinen@iki.fi \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).