From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Subject: Re: [PATCH 0/4] Clean-up for rx51
Date: Fri, 13 Mar 2009 15:47:26 -0700 [thread overview]
Message-ID: <20090313224725.GT19229@atomide.com> (raw)
In-Reply-To: <20090313180707.GQ19229@atomide.com>
[-- Attachment #1: Type: text/plain, Size: 59 bytes --]
Here's one more patch to fix checkpatch.pl warnings.
Tony
[-- Attachment #2: rx51-checkpatch.patch --]
[-- Type: text/x-diff, Size: 3684 bytes --]
From f1d42da50bfdb9e952882f32e2e95f9e9621ce00 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 13 Mar 2009 15:30:06 -0700
Subject: [PATCH] rx51: Clean-up for checkpatch.pl
rx51: Clean-up for checkpatch.pl
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 53f6a79..2672a70 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -43,7 +43,7 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT\x14
+CONFIG_LOG_BUF_SHIFT
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
@@ -194,7 +194,7 @@ CONFIG_OMAP_MCBSP=y
# CONFIG_OMAP_MBOX_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ\x128
+CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_TICK_GPTIMER=1
CONFIG_OMAP_DM_TIMER=y
# CONFIG_OMAP_LL_DEBUG_UART1 is not set
@@ -262,7 +262,7 @@ CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
-CONFIG_HZ\x128
+CONFIG_HZ=128
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
@@ -639,8 +639,8 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT\x16
-CONFIG_BLK_DEV_RAM_SIZE\x16384
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -1686,7 +1686,7 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN\x1024
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index b86e94d..6e23587 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -98,19 +98,19 @@ static int rx51_keymap[] = {
KEY(0, 7, KEY_I),
KEY(1, 0, KEY_O),
KEY(1, 1, KEY_D),
- KEY(1, 2, KEY_DOT ),
+ KEY(1, 2, KEY_DOT),
KEY(1, 3, KEY_V),
- KEY(1, 4, KEY_DOWN ),
+ KEY(1, 4, KEY_DOWN),
KEY(2, 0, KEY_P),
KEY(2, 1, KEY_F),
- KEY(2, 2, KEY_UP ),
+ KEY(2, 2, KEY_UP),
KEY(2, 3, KEY_B),
- KEY(2, 4, KEY_RIGHT ),
- KEY(3, 0, KEY_COMMA ),
+ KEY(2, 4, KEY_RIGHT),
+ KEY(3, 0, KEY_COMMA),
KEY(3, 1, KEY_G),
- KEY(3, 2, KEY_ENTER ),
+ KEY(3, 2, KEY_ENTER),
KEY(3, 3, KEY_N),
- KEY(4, 0, KEY_BACKSPACE ),
+ KEY(4, 0, KEY_BACKSPACE),
KEY(4, 1, KEY_H),
KEY(4, 3, KEY_M),
KEY(4, 4, KEY_LEFTCTRL),
@@ -122,7 +122,7 @@ static int rx51_keymap[] = {
KEY(6, 1, KEY_K),
KEY(6, 2, KEY_X),
KEY(6, 3, KEY_SPACE),
- KEY(6, 4, KEY_FN ),
+ KEY(6, 4, KEY_FN),
KEY(7, 0, KEY_S),
KEY(7, 1, KEY_L),
KEY(7, 2, KEY_C),
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 98dfde1..c90120c 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -14,6 +14,8 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -30,10 +32,6 @@
#include <mach/gpmc.h>
#include <mach/usb.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-
-
static struct omap_uart_config rx51_uart_config = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
prev parent reply other threads:[~2009-03-13 22:47 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-13 18:03 [PATCH 0/4] Clean-up for rx51 Tony Lindgren
2009-03-13 18:03 ` [PATCH 1/4] Clean-up rx51 a bit and set the regulators Tony Lindgren
2009-03-17 16:14 ` [APPLIED] " Tony Lindgren
2009-03-13 18:03 ` [PATCH 2/4] Bugfix to RX51 flash support: this board has no NOR flash, Tony Lindgren
2009-03-17 16:14 ` [APPLIED] [PATCH 2/4] Bugfix to RX51 flash support: this board has no NOR Tony Lindgren
2009-03-13 18:04 ` [PATCH 3/4] Set the smc91x timings for rx51 Tony Lindgren
2009-03-17 16:14 ` [APPLIED] " Tony Lindgren
2009-03-13 18:04 ` [PATCH 4/4] Hook up twl4030 regulators to the relevant RX51 MMC slots Tony Lindgren
2009-03-17 16:14 ` [APPLIED] [PATCH 4/4] Hook up twl4030 regulators to the relevant RX51 MMC Tony Lindgren
2009-03-13 18:07 ` [PATCH 0/4] Clean-up for rx51 Tony Lindgren
2009-03-13 22:47 ` Tony Lindgren [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090313224725.GT19229@atomide.com \
--to=tony@atomide.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).