[PATCH v2] regulator: twl: voltage lists for vdd1/2 on twl4030

[PATCH v2] regulator: twl: voltage lists for vdd1/2 on twl4030

[Andreas Kemnade]

_opp_supported_by_regulators() wrongly ignored errors from
regulator_is_supported_voltage(), so it considered errors as
success. Since
commit 498209445124 ("regulator: core: simplify return value on suported_voltage")
regulator_is_supported_voltage() returns a real boolean, so
errors make _opp_supported_by_regulators() return false.

That reveals a problem with the declaration of the VDD1/2
regulators on twl4030.
The VDD1/VDD2 regulators on twl4030 are neither defined with
voltage lists nor with the continuous flag set, so
regulator_is_supported_voltage() returns false and an error
before above mentioned commit (which was considered success)
The result is that after the above mentioned commit cpufreq
does not work properly e.g. dm3730.

[    2.490997] core: _opp_supported_by_regulators: OPP minuV: 1012500 maxuV: 1012500, not supported by regulator
[    2.501617] cpu cpu0: _opp_add: OPP not supported by regulators (300000000)
[    2.509246] core: _opp_supported_by_regulators: OPP minuV: 1200000 maxuV: 1200000, not supported by regulator
[    2.519775] cpu cpu0: _opp_add: OPP not supported by regulators (600000000)
[    2.527313] core: _opp_supported_by_regulators: OPP minuV: 1325000 maxuV: 1325000, not supported by regulator
[    2.537750] cpu cpu0: _opp_add: OPP not supported by regulators (800000000)

The patch fixes declaration of VDD1/2 regulators by
adding proper voltage lists.

Fixes: 498209445124 ("regulator: core: simplify return value on suported_voltage")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
resent because it was rejected by mailing lists, due to technical
issues, sorry for the noise.
changes in v2:
  using a proper voltage list instead of misusing the continuous flag
  subject was regulator: twl: mark vdd1/2 as continuous on twl4030

 drivers/regulator/twl-regulator.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 6fa15b2d6fb3..866b4dd01da9 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -359,6 +359,17 @@ static const u16 VINTANA2_VSEL_table[] = {
 	2500, 2750,
 };
 
+/* 600mV to 1450mV in 12.5 mV steps */
+static const struct regulator_linear_range VDD1_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500)
+};
+
+/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */
+static const struct regulator_linear_range VDD2_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500),
+	REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500)
+};
+
 static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
@@ -427,6 +438,8 @@ static int twl4030smps_get_voltage(struct regulator_dev *rdev)
 }
 
 static const struct regulator_ops twl4030smps_ops = {
+	.list_voltage   = regulator_list_voltage_linear_range,
+
 	.set_voltage	= twl4030smps_set_voltage,
 	.get_voltage	= twl4030smps_get_voltage,
 };
@@ -466,7 +479,8 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
 		}, \
 	}
 
-#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \
+#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \
+		n_volt) \
 static const struct twlreg_info TWL4030_INFO_##label = { \
 	.base = offset, \
 	.id = num, \
@@ -479,6 +493,9 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
 		.owner = THIS_MODULE, \
 		.enable_time = turnon_delay, \
 		.of_map_mode = twl4030reg_map_mode, \
+		.n_voltages = n_volt, \
+		.n_linear_ranges = ARRAY_SIZE(label ## _ranges), \
+		.linear_ranges = label ## _ranges, \
 		}, \
 	}
 
@@ -518,8 +535,8 @@ TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00);
 TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08);
 TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08);
 TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08);
-TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08);
-TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08);
+TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68);
+TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69);
 /* VUSBCP is managed *only* by the USB subchip */
 TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08);
 TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08);
-- 
2.20.1

Re: [PATCH v2] regulator: twl: voltage lists for vdd1/2 on twl4030

[Adam Ford]

On Wed, Aug 14, 2019 at 5:18 PM Andreas Kemnade <andreas@kemnade.info> wrote:
>
> _opp_supported_by_regulators() wrongly ignored errors from
> regulator_is_supported_voltage(), so it considered errors as
> success. Since
> commit 498209445124 ("regulator: core: simplify return value on suported_voltage")
> regulator_is_supported_voltage() returns a real boolean, so
> errors make _opp_supported_by_regulators() return false.
>
> That reveals a problem with the declaration of the VDD1/2
> regulators on twl4030.
> The VDD1/VDD2 regulators on twl4030 are neither defined with
> voltage lists nor with the continuous flag set, so
> regulator_is_supported_voltage() returns false and an error
> before above mentioned commit (which was considered success)
> The result is that after the above mentioned commit cpufreq
> does not work properly e.g. dm3730.
>
> [    2.490997] core: _opp_supported_by_regulators: OPP minuV: 1012500 maxuV: 1012500, not supported by regulator
> [    2.501617] cpu cpu0: _opp_add: OPP not supported by regulators (300000000)
> [    2.509246] core: _opp_supported_by_regulators: OPP minuV: 1200000 maxuV: 1200000, not supported by regulator
> [    2.519775] cpu cpu0: _opp_add: OPP not supported by regulators (600000000)
> [    2.527313] core: _opp_supported_by_regulators: OPP minuV: 1325000 maxuV: 1325000, not supported by regulator
> [    2.537750] cpu cpu0: _opp_add: OPP not supported by regulators (800000000)
>
> The patch fixes declaration of VDD1/2 regulators by
> adding proper voltage lists.
>
> Fixes: 498209445124 ("regulator: core: simplify return value on suported_voltage")
> Cc: stable@vger.kernel.org
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>

Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit

> ---
> resent because it was rejected by mailing lists, due to technical
> issues, sorry for the noise.
> changes in v2:
>   using a proper voltage list instead of misusing the continuous flag
>   subject was regulator: twl: mark vdd1/2 as continuous on twl4030
>
>  drivers/regulator/twl-regulator.c | 23 ++++++++++++++++++++---
>  1 file changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
> index 6fa15b2d6fb3..866b4dd01da9 100644
> --- a/drivers/regulator/twl-regulator.c
> +++ b/drivers/regulator/twl-regulator.c
> @@ -359,6 +359,17 @@ static const u16 VINTANA2_VSEL_table[] = {
>         2500, 2750,
>  };
>
> +/* 600mV to 1450mV in 12.5 mV steps */
> +static const struct regulator_linear_range VDD1_ranges[] = {
> +       REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500)
> +};
> +
> +/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */
> +static const struct regulator_linear_range VDD2_ranges[] = {
> +       REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500),
> +       REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500)
> +};
> +
>  static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
>  {
>         struct twlreg_info      *info = rdev_get_drvdata(rdev);
> @@ -427,6 +438,8 @@ static int twl4030smps_get_voltage(struct regulator_dev *rdev)
>  }
>
>  static const struct regulator_ops twl4030smps_ops = {
> +       .list_voltage   = regulator_list_voltage_linear_range,
> +
>         .set_voltage    = twl4030smps_set_voltage,
>         .get_voltage    = twl4030smps_get_voltage,
>  };
> @@ -466,7 +479,8 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
>                 }, \
>         }
>
> -#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \
> +#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \
> +               n_volt) \
>  static const struct twlreg_info TWL4030_INFO_##label = { \
>         .base = offset, \
>         .id = num, \
> @@ -479,6 +493,9 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
>                 .owner = THIS_MODULE, \
>                 .enable_time = turnon_delay, \
>                 .of_map_mode = twl4030reg_map_mode, \
> +               .n_voltages = n_volt, \
> +               .n_linear_ranges = ARRAY_SIZE(label ## _ranges), \
> +               .linear_ranges = label ## _ranges, \
>                 }, \
>         }
>
> @@ -518,8 +535,8 @@ TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00);
>  TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08);
>  TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08);
>  TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08);
> -TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08);
> -TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08);
> +TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68);
> +TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69);
>  /* VUSBCP is managed *only* by the USB subchip */
>  TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08);
>  TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08);
> --
> 2.20.1
>

Applied "regulator: twl: voltage lists for vdd1/2 on twl4030" to the regulator tree

[Mark Brown]

The patch

   regulator: twl: voltage lists for vdd1/2 on twl4030

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 3829100a63724f6dbf264b2a7f06e7f638ed952d Mon Sep 17 00:00:00 2001
From: Andreas Kemnade <andreas@kemnade.info>
Date: Wed, 14 Aug 2019 23:43:19 +0200
Subject: [PATCH] regulator: twl: voltage lists for vdd1/2 on twl4030

_opp_supported_by_regulators() wrongly ignored errors from
regulator_is_supported_voltage(), so it considered errors as
success. Since
commit 498209445124 ("regulator: core: simplify return value on suported_voltage")
regulator_is_supported_voltage() returns a real boolean, so
errors make _opp_supported_by_regulators() return false.

That reveals a problem with the declaration of the VDD1/2
regulators on twl4030.
The VDD1/VDD2 regulators on twl4030 are neither defined with
voltage lists nor with the continuous flag set, so
regulator_is_supported_voltage() returns false and an error
before above mentioned commit (which was considered success)
The result is that after the above mentioned commit cpufreq
does not work properly e.g. dm3730.

[    2.490997] core: _opp_supported_by_regulators: OPP minuV: 1012500 maxuV: 1012500, not supported by regulator
[    2.501617] cpu cpu0: _opp_add: OPP not supported by regulators (300000000)
[    2.509246] core: _opp_supported_by_regulators: OPP minuV: 1200000 maxuV: 1200000, not supported by regulator
[    2.519775] cpu cpu0: _opp_add: OPP not supported by regulators (600000000)
[    2.527313] core: _opp_supported_by_regulators: OPP minuV: 1325000 maxuV: 1325000, not supported by regulator
[    2.537750] cpu cpu0: _opp_add: OPP not supported by regulators (800000000)

The patch fixes declaration of VDD1/2 regulators by
adding proper voltage lists.

Fixes: 498209445124 ("regulator: core: simplify return value on suported_voltage")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit
Link: https://lore.kernel.org/r/20190814214319.24087-1-andreas@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/twl-regulator.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 6fa15b2d6fb3..866b4dd01da9 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -359,6 +359,17 @@ static const u16 VINTANA2_VSEL_table[] = {
 	2500, 2750,
 };
 
+/* 600mV to 1450mV in 12.5 mV steps */
+static const struct regulator_linear_range VDD1_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500)
+};
+
+/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */
+static const struct regulator_linear_range VDD2_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500),
+	REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500)
+};
+
 static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
@@ -427,6 +438,8 @@ static int twl4030smps_get_voltage(struct regulator_dev *rdev)
 }
 
 static const struct regulator_ops twl4030smps_ops = {
+	.list_voltage   = regulator_list_voltage_linear_range,
+
 	.set_voltage	= twl4030smps_set_voltage,
 	.get_voltage	= twl4030smps_get_voltage,
 };
@@ -466,7 +479,8 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
 		}, \
 	}
 
-#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \
+#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \
+		n_volt) \
 static const struct twlreg_info TWL4030_INFO_##label = { \
 	.base = offset, \
 	.id = num, \
@@ -479,6 +493,9 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
 		.owner = THIS_MODULE, \
 		.enable_time = turnon_delay, \
 		.of_map_mode = twl4030reg_map_mode, \
+		.n_voltages = n_volt, \
+		.n_linear_ranges = ARRAY_SIZE(label ## _ranges), \
+		.linear_ranges = label ## _ranges, \
 		}, \
 	}
 
@@ -518,8 +535,8 @@ TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00);
 TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08);
 TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08);
 TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08);
-TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08);
-TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08);
+TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68);
+TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69);
 /* VUSBCP is managed *only* by the USB subchip */
 TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08);
 TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08);
-- 
2.20.1

Re: [PATCH v2] regulator: twl: voltage lists for vdd1/2 on twl4030

[Adam Ford]

On Thu, Aug 15, 2019 at 5:47 AM Adam Ford <aford173@gmail.com> wrote:
>
> On Wed, Aug 14, 2019 at 5:18 PM Andreas Kemnade <andreas@kemnade.info> wrote:
> >
> > _opp_supported_by_regulators() wrongly ignored errors from
> > regulator_is_supported_voltage(), so it considered errors as
> > success. Since
> > commit 498209445124 ("regulator: core: simplify return value on suported_voltage")
> > regulator_is_supported_voltage() returns a real boolean, so
> > errors make _opp_supported_by_regulators() return false.
> >
> > That reveals a problem with the declaration of the VDD1/2
> > regulators on twl4030.
> > The VDD1/VDD2 regulators on twl4030 are neither defined with
> > voltage lists nor with the continuous flag set, so
> > regulator_is_supported_voltage() returns false and an error
> > before above mentioned commit (which was considered success)
> > The result is that after the above mentioned commit cpufreq
> > does not work properly e.g. dm3730.
> >
> > [    2.490997] core: _opp_supported_by_regulators: OPP minuV: 1012500 maxuV: 1012500, not supported by regulator
> > [    2.501617] cpu cpu0: _opp_add: OPP not supported by regulators (300000000)
> > [    2.509246] core: _opp_supported_by_regulators: OPP minuV: 1200000 maxuV: 1200000, not supported by regulator
> > [    2.519775] cpu cpu0: _opp_add: OPP not supported by regulators (600000000)
> > [    2.527313] core: _opp_supported_by_regulators: OPP minuV: 1325000 maxuV: 1325000, not supported by regulator
> > [    2.537750] cpu cpu0: _opp_add: OPP not supported by regulators (800000000)
> >
> > The patch fixes declaration of VDD1/2 regulators by
> > adding proper voltage lists.
> >
> > Fixes: 498209445124 ("regulator: core: simplify return value on suported_voltage")
> > Cc: stable@vger.kernel.org
> > Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
>
> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit
>

I am not sure who the right maintainer is, but as of today, cpufreq
for users of twl4030 on 5.3-RC8 is still broken without this patch.
Is there any way it can be applied before the final release?

thank you,

adam
> > ---
> > resent because it was rejected by mailing lists, due to technical
> > issues, sorry for the noise.
> > changes in v2:
> >   using a proper voltage list instead of misusing the continuous flag
> >   subject was regulator: twl: mark vdd1/2 as continuous on twl4030
> >
> >  drivers/regulator/twl-regulator.c | 23 ++++++++++++++++++++---
> >  1 file changed, 20 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
> > index 6fa15b2d6fb3..866b4dd01da9 100644
> > --- a/drivers/regulator/twl-regulator.c
> > +++ b/drivers/regulator/twl-regulator.c
> > @@ -359,6 +359,17 @@ static const u16 VINTANA2_VSEL_table[] = {
> >         2500, 2750,
> >  };
> >
> > +/* 600mV to 1450mV in 12.5 mV steps */
> > +static const struct regulator_linear_range VDD1_ranges[] = {
> > +       REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500)
> > +};
> > +
> > +/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */
> > +static const struct regulator_linear_range VDD2_ranges[] = {
> > +       REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500),
> > +       REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500)
> > +};
> > +
> >  static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
> >  {
> >         struct twlreg_info      *info = rdev_get_drvdata(rdev);
> > @@ -427,6 +438,8 @@ static int twl4030smps_get_voltage(struct regulator_dev *rdev)
> >  }
> >
> >  static const struct regulator_ops twl4030smps_ops = {
> > +       .list_voltage   = regulator_list_voltage_linear_range,
> > +
> >         .set_voltage    = twl4030smps_set_voltage,
> >         .get_voltage    = twl4030smps_get_voltage,
> >  };
> > @@ -466,7 +479,8 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
> >                 }, \
> >         }
> >
> > -#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \
> > +#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \
> > +               n_volt) \
> >  static const struct twlreg_info TWL4030_INFO_##label = { \
> >         .base = offset, \
> >         .id = num, \
> > @@ -479,6 +493,9 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
> >                 .owner = THIS_MODULE, \
> >                 .enable_time = turnon_delay, \
> >                 .of_map_mode = twl4030reg_map_mode, \
> > +               .n_voltages = n_volt, \
> > +               .n_linear_ranges = ARRAY_SIZE(label ## _ranges), \
> > +               .linear_ranges = label ## _ranges, \
> >                 }, \
> >         }
> >
> > @@ -518,8 +535,8 @@ TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00);
> >  TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08);
> >  TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08);
> >  TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08);
> > -TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08);
> > -TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08);
> > +TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68);
> > +TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69);
> >  /* VUSBCP is managed *only* by the USB subchip */
> >  TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08);
> >  TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08);
> > --
> > 2.20.1
> >

Re: [PATCH v2] regulator: twl: voltage lists for vdd1/2 on twl4030

[Andreas Kemnade]

[-- Attachment #1: Type: text/plain, Size: 809 bytes --]

On Mon, 9 Sep 2019 08:32:06 -0500
Adam Ford <aford173@gmail.com> wrote:


> > > The patch fixes declaration of VDD1/2 regulators by
> > > adding proper voltage lists.
> > >
> > > Fixes: 498209445124 ("regulator: core: simplify return value on suported_voltage")
> > > Cc: stable@vger.kernel.org
> > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info>  
> >
> > Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit
> >  
> 
> I am not sure who the right maintainer is, but as of today, cpufreq
> for users of twl4030 on 5.3-RC8 is still broken without this patch.
> Is there any way it can be applied before the final release?
> 
seems to have arrived in Mark Brown's regulator branches. and in linux-next/pending-fixes.
But did not go further...

Regards,
Andreas

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2] regulator: twl: voltage lists for vdd1/2 on twl4030

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 492 bytes --]

On Mon, Sep 09, 2019 at 08:32:06AM -0500, Adam Ford wrote:

> I am not sure who the right maintainer is, but as of today, cpufreq
> for users of twl4030 on 5.3-RC8 is still broken without this patch.
> Is there any way it can be applied before the final release?

Ugh, this affects cpufreq :/  I hadn't realized, sorry.  At this
point it's probably a bit late to get it into the release, but it
is tagged for stable so if it doesn't make it in it will be in
one of the first stable releases.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]