From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas Kemnade Subject: [PATCH v2] regulator: twl: voltage lists for vdd1/2 on twl4030 Date: Wed, 14 Aug 2019 23:43:19 +0200 Message-ID: <20190814214319.24087-1-andreas@kemnade.info> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: stable-owner@vger.kernel.org To: tony@atomide.com, lgirdwood@gmail.com, broonie@kernel.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, sboyd@kernel.org, nm@ti.com, vireshk@kernel.org Cc: Andreas Kemnade , stable@vger.kernel.org List-Id: linux-omap@vger.kernel.org _opp_supported_by_regulators() wrongly ignored errors from regulator_is_supported_voltage(), so it considered errors as success. Since commit 498209445124 ("regulator: core: simplify return value on suported_voltage") regulator_is_supported_voltage() returns a real boolean, so errors make _opp_supported_by_regulators() return false. That reveals a problem with the declaration of the VDD1/2 regulators on twl4030. The VDD1/VDD2 regulators on twl4030 are neither defined with voltage lists nor with the continuous flag set, so regulator_is_supported_voltage() returns false and an error before above mentioned commit (which was considered success) The result is that after the above mentioned commit cpufreq does not work properly e.g. dm3730. [ 2.490997] core: _opp_supported_by_regulators: OPP minuV: 1012500 maxuV: 1012500, not supported by regulator [ 2.501617] cpu cpu0: _opp_add: OPP not supported by regulators (300000000) [ 2.509246] core: _opp_supported_by_regulators: OPP minuV: 1200000 maxuV: 1200000, not supported by regulator [ 2.519775] cpu cpu0: _opp_add: OPP not supported by regulators (600000000) [ 2.527313] core: _opp_supported_by_regulators: OPP minuV: 1325000 maxuV: 1325000, not supported by regulator [ 2.537750] cpu cpu0: _opp_add: OPP not supported by regulators (800000000) The patch fixes declaration of VDD1/2 regulators by adding proper voltage lists. Fixes: 498209445124 ("regulator: core: simplify return value on suported_voltage") Cc: stable@vger.kernel.org Signed-off-by: Andreas Kemnade --- resent because it was rejected by mailing lists, due to technical issues, sorry for the noise. changes in v2: using a proper voltage list instead of misusing the continuous flag subject was regulator: twl: mark vdd1/2 as continuous on twl4030 drivers/regulator/twl-regulator.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 6fa15b2d6fb3..866b4dd01da9 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -359,6 +359,17 @@ static const u16 VINTANA2_VSEL_table[] = { 2500, 2750, }; +/* 600mV to 1450mV in 12.5 mV steps */ +static const struct regulator_linear_range VDD1_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500) +}; + +/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */ +static const struct regulator_linear_range VDD2_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500), + REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500) +}; + static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index) { struct twlreg_info *info = rdev_get_drvdata(rdev); @@ -427,6 +438,8 @@ static int twl4030smps_get_voltage(struct regulator_dev *rdev) } static const struct regulator_ops twl4030smps_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage = twl4030smps_set_voltage, .get_voltage = twl4030smps_get_voltage, }; @@ -466,7 +479,8 @@ static const struct twlreg_info TWL4030_INFO_##label = { \ }, \ } -#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \ +#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \ + n_volt) \ static const struct twlreg_info TWL4030_INFO_##label = { \ .base = offset, \ .id = num, \ @@ -479,6 +493,9 @@ static const struct twlreg_info TWL4030_INFO_##label = { \ .owner = THIS_MODULE, \ .enable_time = turnon_delay, \ .of_map_mode = twl4030reg_map_mode, \ + .n_voltages = n_volt, \ + .n_linear_ranges = ARRAY_SIZE(label ## _ranges), \ + .linear_ranges = label ## _ranges, \ }, \ } @@ -518,8 +535,8 @@ TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00); TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08); TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08); TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08); -TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08); -TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08); +TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68); +TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69); /* VUSBCP is managed *only* by the USB subchip */ TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08); TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08); -- 2.20.1