linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Sebastian Reichel <sre@kernel.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
	Merlijn Wajer <merlijn@wizzup.org>,
	"H. Nikolaus Schaller" <hns@goldelico.com>,
	Rob Herring <robh@kernel.org>,
	linux-omap@vger.kernel.org, dri-devel@lists.freedesktop.org,
	kernel@collabora.com,
	Sebastian Reichel <sebastian.reichel@collabora.com>
Subject: [PATCHv2 26/56] drm/omap: dsi: move TE GPIO handling into core
Date: Tue, 25 Feb 2020 00:20:56 +0100	[thread overview]
Message-ID: <20200224232126.3385250-27-sebastian.reichel@collabora.com> (raw)
In-Reply-To: <20200224232126.3385250-1-sebastian.reichel@collabora.com>

In preparation for removing custom DSS calls from the DSI
panel driver, this moves support for external tearing event
GPIOs into the DSI host driver. This way tearing events are
always handled in the core resulting in simplification of
the panel drivers.

The TE GPIO acquisition follows works in the same way as the
exynos DSI implementation.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 .../gpu/drm/omapdrm/displays/panel-dsi-cm.c   | 101 +------------
 drivers/gpu/drm/omapdrm/dss/dsi.c             | 140 ++++++++++++++++--
 2 files changed, 135 insertions(+), 106 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index 79ac1f6b375a..30e48d0de961 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -54,7 +54,6 @@ struct panel_drv_data {
 
 	/* panel HW configuration from DT or platform data */
 	struct gpio_desc *reset_gpio;
-	struct gpio_desc *ext_te_gpio;
 
 	struct regulator_bulk_data supplies[DCS_REGULATOR_SUPPLY_NUM];
 
@@ -68,10 +67,6 @@ struct panel_drv_data {
 
 	bool te_enabled;
 
-	atomic_t do_update;
-
-	struct delayed_work te_timeout_work;
-
 	bool intro_printed;
 
 	struct workqueue_struct *workqueue;
@@ -83,8 +78,6 @@ struct panel_drv_data {
 
 #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
 
-static irqreturn_t dsicm_te_isr(int irq, void *data);
-static void dsicm_te_timeout_work_callback(struct work_struct *work);
 static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable);
 
 static int dsicm_panel_reset(struct panel_drv_data *ddata);
@@ -240,9 +233,6 @@ static int dsicm_enter_ulps(struct panel_drv_data *ddata)
 	if (r)
 		goto err;
 
-	if (ddata->ext_te_gpio)
-		disable_irq(gpiod_to_irq(ddata->ext_te_gpio));
-
 	src->ops->dsi.disable(src, false, true);
 
 	ddata->ulps_enabled = true;
@@ -271,15 +261,12 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
 	src->ops->enable(src);
 	ddata->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
 
-	r = _dsicm_enable_te(ddata, true);
+	r = _dsicm_enable_te(ddata, ddata->te_enabled);
 	if (r) {
 		dev_err(&ddata->dsi->dev, "failed to re-enable TE");
 		goto err2;
 	}
 
-	if (ddata->ext_te_gpio)
-		enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
-
 	dsicm_queue_ulps_work(ddata);
 
 	ddata->ulps_enabled = false;
@@ -290,11 +277,8 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
 	dev_err(&ddata->dsi->dev, "failed to exit ULPS");
 
 	r = dsicm_panel_reset(ddata);
-	if (!r) {
-		if (ddata->ext_te_gpio)
-			enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
+	if (!r)
 		ddata->ulps_enabled = false;
-	}
 
 	dsicm_queue_ulps_work(ddata);
 
@@ -745,43 +729,6 @@ static void dsicm_framedone_cb(int err, void *data)
 	src->ops->dsi.bus_unlock(src);
 }
 
-static irqreturn_t dsicm_te_isr(int irq, void *data)
-{
-	struct panel_drv_data *ddata = data;
-	struct omap_dss_device *src = ddata->src;
-	int old;
-	int r;
-
-	old = atomic_cmpxchg(&ddata->do_update, 1, 0);
-
-	if (old) {
-		cancel_delayed_work(&ddata->te_timeout_work);
-
-		r = src->ops->dsi.update(src, ddata->dsi->channel, dsicm_framedone_cb,
-				ddata);
-		if (r)
-			goto err;
-	}
-
-	return IRQ_HANDLED;
-err:
-	dev_err(&ddata->dsi->dev, "start update failed\n");
-	src->ops->dsi.bus_unlock(src);
-	return IRQ_HANDLED;
-}
-
-static void dsicm_te_timeout_work_callback(struct work_struct *work)
-{
-	struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
-					te_timeout_work.work);
-	struct omap_dss_device *src = ddata->src;
-
-	dev_err(&ddata->dsi->dev, "TE not received for 250ms!\n");
-
-	atomic_set(&ddata->do_update, 0);
-	src->ops->dsi.bus_unlock(src);
-}
-
 static int dsicm_update(struct omap_dss_device *dssdev,
 				    u16 x, u16 y, u16 w, u16 h)
 {
@@ -809,16 +756,10 @@ static int dsicm_update(struct omap_dss_device *dssdev,
 	if (r)
 		goto err;
 
-	if (ddata->te_enabled && ddata->ext_te_gpio) {
-		schedule_delayed_work(&ddata->te_timeout_work,
-				msecs_to_jiffies(250));
-		atomic_set(&ddata->do_update, 1);
-	} else {
-		r = src->ops->dsi.update(src, ddata->dsi->channel, dsicm_framedone_cb,
-				ddata);
-		if (r)
-			goto err;
-	}
+	r = src->ops->dsi.update(src, ddata->dsi->channel, dsicm_framedone_cb,
+			ddata);
+	if (r)
+		goto err;
 
 	/* note: no bus_unlock here. unlock is src framedone_cb */
 	mutex_unlock(&ddata->lock);
@@ -840,8 +781,7 @@ static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
 	else
 		r = mipi_dsi_dcs_set_tear_off(dsi);
 
-	if (!ddata->ext_te_gpio)
-		src->ops->dsi.enable_te(src, enable);
+	src->ops->dsi.enable_te(src, enable);
 
 	/* possible panel bug */
 	msleep(100);
@@ -934,14 +874,6 @@ static int dsicm_probe_of(struct mipi_dsi_device *dsi)
 		return err;
 	}
 
-	ddata->ext_te_gpio = devm_gpiod_get_optional(&dsi->dev, "te",
-						     GPIOD_IN);
-	if (IS_ERR(ddata->ext_te_gpio)) {
-		err = PTR_ERR(ddata->ext_te_gpio);
-		dev_err(&dsi->dev, "TE gpio request failed: %d", err);
-		return err;
-	}
-
 	err = of_get_display_timing(node, "panel-timing", &timing);
 	if (!err) {
 		videomode_from_timing(&timing, &ddata->vm);
@@ -1026,25 +958,6 @@ static int dsicm_probe(struct mipi_dsi_device *dsi)
 
 	mutex_init(&ddata->lock);
 
-	atomic_set(&ddata->do_update, 0);
-
-	if (ddata->ext_te_gpio) {
-		r = devm_request_irq(dev, gpiod_to_irq(ddata->ext_te_gpio),
-				dsicm_te_isr,
-				IRQF_TRIGGER_RISING,
-				"taal vsync", ddata);
-
-		if (r) {
-			dev_err(dev, "IRQ request failed\n");
-			goto err_reg;
-		}
-
-		INIT_DEFERRABLE_WORK(&ddata->te_timeout_work,
-					dsicm_te_timeout_work_callback);
-
-		dev_dbg(dev, "Using GPIO TE\n");
-	}
-
 	ddata->workqueue = create_singlethread_workqueue("dsicm_wq");
 	if (!ddata->workqueue) {
 		r = -ENOMEM;
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index 15298ebb9d69..7c160512c886 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -14,7 +14,9 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/mutex.h>
 #include <linux/module.h>
 #include <linux/semaphore.h>
@@ -371,6 +373,11 @@ struct dsi_data {
 	unsigned int update_bytes;
 #endif
 
+	/* external TE GPIO */
+	struct gpio_desc *te_gpio;
+	struct delayed_work te_timeout_work;
+	atomic_t do_ext_te_update;
+
 	bool te_enabled;
 	bool ulps_enabled;
 
@@ -3834,19 +3841,12 @@ static void dsi_framedone_irq_callback(void *data)
 	dsi_handle_framedone(dsi, 0);
 }
 
-static int dsi_update(struct omap_dss_device *dssdev, int channel,
-		void (*callback)(int, void *), void *data)
+static int _dsi_update(struct dsi_data *dsi)
 {
-	struct dsi_data *dsi = to_dsi_data(dssdev);
 	u16 dw, dh;
 
 	dsi_perf_mark_setup(dsi);
 
-	dsi->update_channel = channel;
-
-	dsi->framedone_callback = callback;
-	dsi->framedone_data = data;
-
 	dw = dsi->vm.hactive;
 	dh = dsi->vm.vactive;
 
@@ -3859,6 +3859,26 @@ static int dsi_update(struct omap_dss_device *dssdev, int channel,
 	return 0;
 }
 
+static int dsi_update(struct omap_dss_device *dssdev, int channel,
+		void (*callback)(int, void *), void *data)
+{
+	struct dsi_data *dsi = to_dsi_data(dssdev);
+
+	dsi->update_channel = channel;
+	dsi->framedone_callback = callback;
+	dsi->framedone_data = data;
+
+	if (dsi->te_enabled && dsi->te_gpio) {
+		schedule_delayed_work(&dsi->te_timeout_work,
+				      msecs_to_jiffies(250));
+		atomic_set(&dsi->do_ext_te_update, 1);
+	} else {
+		_dsi_update(dsi);
+	}
+
+	return 0;
+}
+
 /* Display funcs */
 
 static int dsi_configure_dispc_clocks(struct dsi_data *dsi)
@@ -4102,6 +4122,14 @@ static int dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
 	struct dsi_data *dsi = to_dsi_data(dssdev);
 
 	dsi->te_enabled = enable;
+
+	if (dsi->te_gpio) {
+		if (enable)
+			enable_irq(gpiod_to_irq(dsi->te_gpio));
+		else
+			disable_irq(gpiod_to_irq(dsi->te_gpio));
+	}
+
 	return 0;
 }
 
@@ -4779,11 +4807,91 @@ static const struct omap_dss_device_ops dsi_ops = {
 	},
 };
 
+static irqreturn_t omap_dsi_te_irq_handler(int irq, void *dev_id)
+{
+	struct dsi_data *dsi = (struct dsi_data*) dev_id;
+	int old;
+
+	old = atomic_cmpxchg(&dsi->do_ext_te_update, 1, 0);
+	if (old) {
+		cancel_delayed_work(&dsi->te_timeout_work);
+		_dsi_update(dsi);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void omap_dsi_te_timeout_work_callback(struct work_struct *work)
+{
+	struct dsi_data *dsi = container_of(work, struct dsi_data,
+					te_timeout_work.work);
+	int old;
+
+	old = atomic_cmpxchg(&dsi->do_ext_te_update, 1, 0);
+	if (old) {
+		dev_err(dsi->dev, "TE not received for 250ms!\n");
+		_dsi_update(dsi);
+	}
+
+	return;
+}
+
+static int omap_dsi_register_te_irq(struct dsi_data *dsi,
+				    struct mipi_dsi_device *client)
+{
+	int err;
+	int te_irq;
+
+	dsi->te_gpio = gpiod_get_from_of_node(client->dev.of_node,
+					      "te-gpios", 0, GPIOD_IN,
+					      "dsi-tearing-effect");
+	if (IS_ERR(dsi->te_gpio)) {
+		err = PTR_ERR(dsi->te_gpio);
+
+		if (err == -ENOENT) {
+			dsi->te_gpio = NULL;
+			return 0;
+		} else {
+			dev_err(dsi->dev, "Could not get TE gpio: %d\n", err);
+			return err;
+		}
+	}
+
+	te_irq = gpiod_to_irq(dsi->te_gpio);
+	irq_set_status_flags(te_irq, IRQ_NOAUTOEN);
+
+	err = request_threaded_irq(te_irq, omap_dsi_te_irq_handler, NULL,
+				   IRQF_TRIGGER_RISING, "TE", dsi);
+	if (err) {
+		dev_err(dsi->dev, "request irq failed with %d\n", err);
+		gpiod_put(dsi->te_gpio);
+		return err;
+	}
+
+	INIT_DEFERRABLE_WORK(&dsi->te_timeout_work,
+			     omap_dsi_te_timeout_work_callback);
+
+	dev_dbg(dsi->dev, "Using GPIO TE\n");
+
+	return 0;
+}
+
+static void omap_dsi_unregister_te_irq(struct dsi_data *dsi)
+{
+	if (dsi->te_gpio) {
+		free_irq(gpiod_to_irq(dsi->te_gpio), dsi);
+		cancel_delayed_work(&dsi->te_timeout_work);
+		gpiod_put(dsi->te_gpio);
+		dsi->te_gpio = NULL;
+	}
+}
+
 int omap_dsi_host_attach(struct mipi_dsi_host *host,
 			 struct mipi_dsi_device *client)
 {
 	struct dsi_data *dsi = host_to_omap(host);
 	unsigned int channel = client->channel;
+	int r;
 
 	if (channel > 3)
 		return -EINVAL;
@@ -4793,13 +4901,20 @@ int omap_dsi_host_attach(struct mipi_dsi_host *host,
 		return -EBUSY;
 	}
 
-	dsi->vc[channel].dest = client;
+	atomic_set(&dsi->do_ext_te_update, 0);
 
-	dsi->pix_fmt = client->format;
-	if (client->mode_flags & MIPI_DSI_MODE_VIDEO)
+	if (client->mode_flags & MIPI_DSI_MODE_VIDEO) {
 		dsi->mode = OMAP_DSS_DSI_VIDEO_MODE;
-	else
+	} else {
+		r = omap_dsi_register_te_irq(dsi, client);
+		if (r)
+			return r;
+
 		dsi->mode = OMAP_DSS_DSI_CMD_MODE;
+	}
+
+	dsi->vc[channel].dest = client;
+	dsi->pix_fmt = client->format;
 
 	return 0;
 }
@@ -4816,6 +4931,7 @@ int omap_dsi_host_detach(struct mipi_dsi_host *host,
 	if (dsi->vc[channel].dest != client)
 		return -EINVAL;
 
+	omap_dsi_unregister_te_irq(dsi);
 	dsi->vc[channel].dest = NULL;
 	return 0;
 }
-- 
2.25.0


  parent reply	other threads:[~2020-02-24 23:28 UTC|newest]

Thread overview: 113+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-24 23:20 [PATCHv2 00/56] drm/omap: Convert DSI code to use drm_mipi_dsi and drm_panel Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 01/56] ARM: dts: omap: add channel to DSI panels Sebastian Reichel
2020-02-24 23:38   ` Laurent Pinchart
2020-02-25  0:01     ` Sebastian Reichel
2020-02-27 20:09   ` Sam Ravnborg
2020-02-24 23:20 ` [PATCHv2 02/56] ARM: dts: omap4-droid4: add panel compatible Sebastian Reichel
2020-02-24 23:37   ` Laurent Pinchart
2020-02-24 23:47     ` Tony Lindgren
2020-02-27 22:10       ` Laurent Pinchart
2020-02-28 15:34         ` Tony Lindgren
2020-02-24 23:57     ` Sebastian Reichel
2020-02-27 20:10   ` Sam Ravnborg
2020-02-24 23:20 ` [PATCHv2 03/56] Revert "drm/omap: dss: Remove unused omap_dss_device operations" Sebastian Reichel
2020-03-25 12:42   ` Tomi Valkeinen
2020-02-24 23:20 ` [PATCHv2 04/56] omap/drm: drop unused dsi.configure_pins Sebastian Reichel
2020-02-24 23:42   ` Laurent Pinchart
2020-02-26 21:28     ` Sebastian Reichel
2020-02-26 21:36       ` Laurent Pinchart
2020-02-26 22:25         ` Sebastian Reichel
2020-03-25 12:45   ` Tomi Valkeinen
2020-02-24 23:20 ` [PATCHv2 05/56] drm/omap: dsi: use MIPI_DSI_FMT_* instead of OMAP_DSS_DSI_FMT_* Sebastian Reichel
2020-02-25 13:58   ` Laurent Pinchart
2020-02-26 21:25     ` Sebastian Reichel
2020-03-25 12:52   ` Tomi Valkeinen
2020-02-24 23:20 ` [PATCHv2 06/56] drm/omap: constify write buffers Sebastian Reichel
2020-02-25 14:13   ` Laurent Pinchart
2020-03-25 12:53   ` Tomi Valkeinen
2020-02-24 23:20 ` [PATCHv2 07/56] drm/omap: dsi: add generic transfer function Sebastian Reichel
2020-02-25 14:16   ` Laurent Pinchart
2020-03-25 13:05   ` Tomi Valkeinen
2020-02-24 23:20 ` [PATCHv2 08/56] drm/omap: panel-dsi-cm: convert to transfer API Sebastian Reichel
2020-02-25 14:52   ` Laurent Pinchart
2020-02-26 22:12     ` Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 09/56] drm/omap: dsi: unexport specific data transfer functions Sebastian Reichel
2020-02-25 14:53   ` Laurent Pinchart
2020-02-24 23:20 ` [PATCHv2 10/56] drm/omap: dsi: drop virtual channel logic Sebastian Reichel
2020-02-25 15:01   ` Laurent Pinchart
2020-04-01 11:30     ` Tomi Valkeinen
2020-04-01 11:33       ` Laurent Pinchart
2020-04-01 11:43         ` Tomi Valkeinen
2020-02-24 23:20 ` [PATCHv2 11/56] drm/omap: dsi: simplify write function Sebastian Reichel
2020-02-25 15:31   ` Laurent Pinchart
2020-02-26 22:46     ` Sebastian Reichel
2020-02-26 22:48       ` Laurent Pinchart
2020-02-24 23:20 ` [PATCHv2 12/56] drm/omap: dsi: simplify read functions Sebastian Reichel
2020-02-25 16:20   ` Laurent Pinchart
2020-02-24 23:20 ` [PATCHv2 13/56] drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg Sebastian Reichel
2020-02-25 16:30   ` Laurent Pinchart
2020-02-26 23:34     ` Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 14/56] drm/omap: dsi: introduce mipi_dsi_host Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 15/56] drm/omap: panel-dsi-cm: use DSI helpers Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 16/56] drm/omap: dsi: request VC via mipi_dsi_attach Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 17/56] drm/omap: panel-dsi-cm: drop hardcoded VC Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 18/56] drm/omap: panel-dsi-cm: use common MIPI DCS 1.3 defines Sebastian Reichel
2020-04-01 12:09   ` Tomi Valkeinen
2020-02-24 23:20 ` [PATCHv2 19/56] drm/omap: dsi: drop unused memory_read() Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 20/56] drm/omap: dsi: drop unused get_te() Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 21/56] drm/omap: dsi: drop unused enable_te() Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 22/56] drm/omap: dsi: drop useless sync() Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 23/56] drm/omap: dsi: use pixel-format and mode from attach Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 24/56] drm/omap: panel-dsi-cm: use bulk regulator API Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 25/56] drm/omap: dsi: lp/hs switching support for transfer() Sebastian Reichel
2020-02-24 23:20 ` Sebastian Reichel [this message]
2020-02-24 23:20 ` [PATCHv2 27/56] drm/omap: dsi: drop custom enable_te() API Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 28/56] drm/omap: dsi: do bus locking in host driver Sebastian Reichel
2020-02-24 23:20 ` [PATCHv2 29/56] drm/omap: dsi: untangle ulps ops from enable/disable Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 30/56] drm/dsi: add MIPI_DSI_MODE_ULPS_IDLE Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 31/56] drm/omap: dsi: do ULPS in host driver Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 32/56] drm/omap: dsi: move panel refresh function to host Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 33/56] drm/omap: dsi: Reverse direction of the DSS device enable/disable operations Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 34/56] drm/omap: dsi: drop custom panel capability support Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 35/56] drm/omap: dsi: convert to drm_panel Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 36/56] drm/omap: drop omapdss-boot-init Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 37/56] drm/omap: dsi: implement check timings Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 38/56] drm/omap: panel-dsi-cm: use DEVICE_ATTR_RO Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 39/56] drm/omap: panel-dsi-cm: support unbinding Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 40/56] drm/omap: panel-dsi-cm: fix remove() Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 41/56] drm/omap: dsi: return proper error code from dsi_update_all() Sebastian Reichel
2020-04-01 12:23   ` Tomi Valkeinen
2020-02-24 23:21 ` [PATCHv2 42/56] drm/omap: remove global dss_device variable Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 43/56] drm/omap: bind components with drm_device argument Sebastian Reichel
2020-02-27  0:32   ` Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 44/56] drm/panel: Move OMAP's DSI command mode panel driver Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 45/56] drm/omap: dsi: Register a drm_bridge Sebastian Reichel
2020-02-25 11:50   ` [PATCHv2.1 " Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 46/56] drm/omap: remove legacy DSS device operations Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 47/56] drm/omap: remove unused omap_connector Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 48/56] drm/omap: simplify omap_display_id Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 49/56] drm/omap: drop unused DSS next pointer Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 50/56] drm/omap: drop empty omap_encoder helper functions Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 51/56] drm/omap: drop DSS ops_flags Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 52/56] drm/omap: drop dssdev display field Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 53/56] drm/omap: simplify DSI manual update code Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 54/56] ARM: omap2plus_defconfig: Update for moved DSI command mode panel Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 55/56] drm/panel/panel-dsi-cm: support rotation property Sebastian Reichel
2020-02-24 23:21 ` [PATCHv2 56/56] ARM: dts: omap4-droid4: add panel orientation Sebastian Reichel
2020-02-25  0:10 ` [PATCHv2 00/56] drm/omap: Convert DSI code to use drm_mipi_dsi and drm_panel Tony Lindgren
2020-02-25  2:28   ` Sebastian Reichel
2020-02-25 15:42     ` Tony Lindgren
2020-02-25 23:01       ` Sebastian Reichel
2020-02-25 23:06         ` Laurent Pinchart
2020-02-25 23:09         ` Tony Lindgren
2020-02-25 23:52           ` Sebastian Reichel
2020-02-26 12:20             ` Tomi Valkeinen
2020-02-25 11:53 ` [PATCHv2 57/56] dt-bindings: display: panel-dsi-cm: convert to YAML Sebastian Reichel
2020-02-27 20:35   ` Sam Ravnborg
2020-02-27 22:08     ` Laurent Pinchart
2020-02-26 12:28 ` [PATCHv2 00/56] drm/omap: Convert DSI code to use drm_mipi_dsi and drm_panel Tomi Valkeinen
2020-02-27  0:28   ` Sebastian Reichel
2020-03-25 12:47 ` Tomi Valkeinen
2020-03-25 13:03   ` Laurent Pinchart
2020-04-01 12:43     ` Tomi Valkeinen
2020-06-25 13:07 ` H. Nikolaus Schaller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200224232126.3385250-27-sebastian.reichel@collabora.com \
    --to=sebastian.reichel@collabora.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hns@goldelico.com \
    --cc=kernel@collabora.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=merlijn@wizzup.org \
    --cc=robh@kernel.org \
    --cc=sre@kernel.org \
    --cc=tomi.valkeinen@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).