Re: [PATCHv7 04/15] remoteproc/omap: Add support to parse internal memories from DT

[Mathieu Poirier <mathieu.poirier@linaro.org>]

On Fri, Feb 21, 2020 at 12:19:25PM +0200, Tero Kristo wrote:
> From: Suman Anna <s-anna@ti.com>
> 
> The OMAP remoteproc driver has been enhanced to parse and store
> the kernel mappings for different internal RAM memories that may
> be present within each remote processor IP subsystem. Different
> devices have varying memories present on current SoCs. The current
> support handles the L2RAM for all IPU devices on OMAP4+ SoCs. The
> DSPs on OMAP4/OMAP5 only have Unicaches and do not have any L1 or
> L2 RAM memories.
> 
> IPUs are expected to have the L2RAM at a fixed device address of
> 0x20000000, based on the current limitations on Attribute MMU
> configurations.
> 
> NOTE:
> The current logic doesn't handle the parsing of memories for DRA7
> remoteproc devices, and will be added alongside the DRA7 support.
> 
> Signed-off-by: Suman Anna <s-anna@ti.com>
> [t-kristo: converted to parse mem names / device addresses from pdata]
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>  drivers/remoteproc/omap_remoteproc.c | 89 ++++++++++++++++++++++++++++
>  1 file changed, 89 insertions(+)
> 
> diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
> index 64b559caadff..4f92b069f5d0 100644
> --- a/drivers/remoteproc/omap_remoteproc.c
> +++ b/drivers/remoteproc/omap_remoteproc.c
> @@ -39,11 +39,27 @@ struct omap_rproc_boot_data {
>  	unsigned int boot_reg;
>  };
>  
> +/**
> + * struct omap_rproc_mem - internal memory structure
> + * @cpu_addr: MPU virtual address of the memory region
> + * @bus_addr: bus address used to access the memory region
> + * @dev_addr: device address of the memory region from DSP view
> + * @size: size of the memory region
> + */
> +struct omap_rproc_mem {
> +	void __iomem *cpu_addr;
> +	phys_addr_t bus_addr;
> +	u32 dev_addr;
> +	size_t size;
> +};
> +
>  /**
>   * struct omap_rproc - omap remote processor state
>   * @mbox: mailbox channel handle
>   * @client: mailbox client to request the mailbox channel
>   * @boot_data: boot data structure for setting processor boot address
> + * @mem: internal memory regions data
> + * @num_mems: number of internal memory regions
>   * @rproc: rproc handle
>   * @reset: reset handle
>   */
> @@ -51,16 +67,30 @@ struct omap_rproc {
>  	struct mbox_chan *mbox;
>  	struct mbox_client client;
>  	struct omap_rproc_boot_data *boot_data;
> +	struct omap_rproc_mem *mem;
> +	int num_mems;
>  	struct rproc *rproc;
>  	struct reset_control *reset;
>  };
>  
> +/**
> + * struct omap_rproc_mem_data - memory definitions for an omap remote processor
> + * @name: name for this memory entry
> + * @dev_addr: device address for the memory entry
> + */
> +struct omap_rproc_mem_data {
> +	const char *name;
> +	const u32 dev_addr;
> +};
> +
>  /**
>   * struct omap_rproc_dev_data - device data for the omap remote processor
>   * @device_name: device name of the remote processor
> + * @mems: memory definitions for this remote processor
>   */
>  struct omap_rproc_dev_data {
>  	const char *device_name;
> +	const struct omap_rproc_mem_data *mems;
>  };
>  
>  /**
> @@ -223,12 +253,18 @@ static const struct rproc_ops omap_rproc_ops = {
>  	.kick		= omap_rproc_kick,
>  };
>  
> +static const struct omap_rproc_mem_data ipu_mems[] = {
> +	{ .name = "l2ram", .dev_addr = 0x20000000 },
> +	{ },
> +};
> +
>  static const struct omap_rproc_dev_data omap4_dsp_dev_data = {
>  	.device_name	= "dsp",
>  };
>  
>  static const struct omap_rproc_dev_data omap4_ipu_dev_data = {
>  	.device_name	= "ipu",
> +	.mems		= ipu_mems,
>  };
>  
>  static const struct omap_rproc_dev_data omap5_dsp_dev_data = {
> @@ -237,6 +273,7 @@ static const struct omap_rproc_dev_data omap5_dsp_dev_data = {
>  
>  static const struct omap_rproc_dev_data omap5_ipu_dev_data = {
>  	.device_name	= "ipu",
> +	.mems		= ipu_mems,
>  };
>  
>  static const struct of_device_id omap_rproc_of_match[] = {
> @@ -311,6 +348,54 @@ static int omap_rproc_get_boot_data(struct platform_device *pdev,
>  	return 0;
>  }
>  
> +static int omap_rproc_of_get_internal_memories(struct platform_device *pdev,
> +					       struct rproc *rproc)
> +{
> +	struct omap_rproc *oproc = rproc->priv;
> +	struct device *dev = &pdev->dev;
> +	const struct omap_rproc_dev_data *data;
> +	struct resource *res;
> +	int num_mems;
> +	int i;
> +
> +	data = of_device_get_match_data(&pdev->dev);
> +	if (!data)
> +		return -ENODEV;
> +
> +	if (!data->mems)
> +		return 0;
> +
> +	for (num_mems = 0; data->mems[num_mems].name; num_mems++)
> +		;

Please use of_property_count_elems_of_size() as it was done in omap_hwmod.c [1]

[1]. https://elixir.bootlin.com/linux/v5.6-rc4/source/arch/arm/mach-omap2/omap_hwmod.c#L717

With the above:

Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>


> +
> +	oproc->mem = devm_kcalloc(dev, num_mems, sizeof(*oproc->mem),
> +				  GFP_KERNEL);
> +	if (!oproc->mem)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < num_mems; i++) {
> +		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +						   data->mems[i].name);
> +		oproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
> +		if (IS_ERR(oproc->mem[i].cpu_addr)) {
> +			dev_err(dev, "failed to parse and map %s memory\n",
> +				data->mems[i].name);
> +			return PTR_ERR(oproc->mem[i].cpu_addr);
> +		}
> +		oproc->mem[i].bus_addr = res->start;
> +		oproc->mem[i].dev_addr = data->mems[i].dev_addr;
> +		oproc->mem[i].size = resource_size(res);
> +
> +		dev_dbg(dev, "memory %8s: bus addr %pa size 0x%x va %pK da 0x%x\n",
> +			data->mems[i].name, &oproc->mem[i].bus_addr,
> +			oproc->mem[i].size, oproc->mem[i].cpu_addr,
> +			oproc->mem[i].dev_addr);
> +	}
> +	oproc->num_mems = num_mems;
> +
> +	return 0;
> +}
> +
>  static int omap_rproc_probe(struct platform_device *pdev)
>  {
>  	struct device_node *np = pdev->dev.of_node;
> @@ -350,6 +435,10 @@ static int omap_rproc_probe(struct platform_device *pdev)
>  	/* All existing OMAP IPU and DSP processors have an MMU */
>  	rproc->has_iommu = true;
>  
> +	ret = omap_rproc_of_get_internal_memories(pdev, rproc);
> +	if (ret)
> +		goto free_rproc;
> +
>  	ret = omap_rproc_get_boot_data(pdev, rproc);
>  	if (ret)
>  		goto free_rproc;
> -- 
> 2.17.1
> 
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki