[PATCH 00/10] Complete updating CPSW and EDMA to probe with dts

[PATCH 00/10] Complete updating CPSW and EDMA to probe with dts

[Tony Lindgren]

Hi all,

This series completes the conversion of CPSW and EDMA to probe with dts
data with ti81xx being the last omap user.

Regards,

Tony


Tony Lindgren (10):
  clk: ti: Fix dm814x clkctrl for ethernet
  ARM: dts: Configure interconnect target module for dm814x cpsw
  ARM: OMAP2+: Drop legacy platform data for dm814x cpsw
  ARM: dts: Configure interconnect target module for dm814x tpcc
  ARM: dts: Configure interconnect target module for dm814x tptc0
  ARM: dts: Configure interconnect target module for dm814x tptc1
  ARM: dts: Configure interconnect target module for dm814x tptc2
  ARM: dts: Configure interconnect target module for dm814x tptc3
  ARM: dts: Configure interconnect target module for ti816x edma
  ARM: OMAP2+: Drop legacy platform data for ti81xx edma

 arch/arm/boot/dts/dm814x-clocks.dtsi       |  14 ++
 arch/arm/boot/dts/dm814x.dtsi              | 260 ++++++++++++++-------
 arch/arm/boot/dts/dm816x.dtsi              | 148 ++++++++++--
 arch/arm/boot/dts/dra62x.dtsi              |   6 +-
 arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 231 ------------------
 drivers/clk/ti/clk-814x.c                  |   7 +-
 include/dt-bindings/clock/dm814.h          |   5 +
 7 files changed, 332 insertions(+), 339 deletions(-)

-- 
2.25.1

[PATCH 01/10] clk: ti: Fix dm814x clkctrl for ethernet

[Tony Lindgren]

We are missing alwon ethernet clock for dm814x and this prevents us
from probing the CPSW with device tree only data. Looks like Ethernet
currently only works if it has been enabled in the bootloader.

Looks like relying on the bootloader clocks is not an issue with the
mainline kernel currently, but it will be an issue when configuring
CPSW Ethernet to probe with device tree data only as we will be managing
the clocks.

Fixes: 26ca2e973844 ("clk: ti: dm814: add clkctrl clock data")
Cc: linux-clk@vger.kernel.org
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

Stephen & Tero, can you guys please ack if this patch looks OK?

---
 arch/arm/boot/dts/dm814x-clocks.dtsi | 14 ++++++++++++++
 drivers/clk/ti/clk-814x.c            |  7 ++++++-
 include/dt-bindings/clock/dm814.h    |  5 +++++
 3 files changed, 25 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi
--- a/arch/arm/boot/dts/dm814x-clocks.dtsi
+++ b/arch/arm/boot/dts/dm814x-clocks.dtsi
@@ -362,4 +362,18 @@ alwon_clkctrl: clk@0 {
 			#clock-cells = <2>;
 		};
 	};
+
+	alwon_ethernet_cm: alwon_ethernet_cm@15d4 {
+		compatible = "ti,omap4-cm";
+		reg = <0x15d4 0x4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x15d4 0x4>;
+
+		alwon_ethernet_clkctrl: clk@0 {
+			compatible = "ti,clkctrl";
+			reg = <0 0x4>;
+			#clock-cells = <2>;
+		};
+	};
 };
diff --git a/drivers/clk/ti/clk-814x.c b/drivers/clk/ti/clk-814x.c
--- a/drivers/clk/ti/clk-814x.c
+++ b/drivers/clk/ti/clk-814x.c
@@ -25,7 +25,6 @@ static const struct omap_clkctrl_reg_data dm814_alwon_clkctrl_regs[] __initconst
 	{ DM814_WD_TIMER_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_NO_IDLEST, "sysclk18_ck" },
 	{ DM814_MCSPI1_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk10_ck" },
 	{ DM814_GPMC_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk6_ck" },
-	{ DM814_CPGMAC0_CLKCTRL, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk" },
 	{ DM814_MPU_CLKCTRL, NULL, CLKF_SW_SUP, "mpu_ck" },
 	{ DM814_RTC_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_NO_IDLEST, "sysclk18_ck" },
 	{ DM814_TPCC_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk4_ck" },
@@ -39,9 +38,15 @@ static const struct omap_clkctrl_reg_data dm814_alwon_clkctrl_regs[] __initconst
 	{ 0 },
 };
 
+static const struct
+omap_clkctrl_reg_data dm814_alwon_ethernet_clkctrl_regs[] __initconst = {
+	{ 0, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk" },
+};
+
 const struct omap_clkctrl_data dm814_clkctrl_data[] __initconst = {
 	{ 0x48180500, dm814_default_clkctrl_regs },
 	{ 0x48181400, dm814_alwon_clkctrl_regs },
+	{ 0x481815d4, dm814_alwon_ethernet_clkctrl_regs },
 	{ 0 },
 };
 
diff --git a/include/dt-bindings/clock/dm814.h b/include/dt-bindings/clock/dm814.h
--- a/include/dt-bindings/clock/dm814.h
+++ b/include/dt-bindings/clock/dm814.h
@@ -34,4 +34,9 @@
 #define DM814_MMC2_CLKCTRL	DM814_CLKCTRL_INDEX(0x220)
 #define DM814_MMC3_CLKCTRL	DM814_CLKCTRL_INDEX(0x224)
 
+/* alwon_ethernet clocks */
+#define DM814_ETHERNET_CLKCTRL_OFFSET	0x1d4
+#define DM814_ETHERNET_CLKCTRL_INDEX(offset)	((offset) - DM814_ETHERNET_CLKCTRL_OFFSET)
+#define DM814_ETHERNET_CPGMAC0_CLKCTRL	DM814_ETHERNET_CLKCTRL_INDEX(0x1d4)
+
 #endif
-- 
2.25.1

[PATCH 02/10] ARM: dts: Configure interconnect target module for dm814x cpsw

[Tony Lindgren]

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module and drop the legacy "ti,hwmods" property.

As this module is very similar to what we already have configured
and working for am33xx, let's just update the whole cpsw with a
single patch to avoid some extra churn on the dts files.

Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm814x.dtsi | 112 ++++++++++++++++++++--------------
 arch/arm/boot/dts/dra62x.dtsi |   6 +-
 2 files changed, 68 insertions(+), 50 deletions(-)

diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -4,6 +4,8 @@
  * kind, whether express or implied.
  */
 
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dm814.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/dm814x.h>
 
@@ -574,57 +576,73 @@ l4hs: l4hs@4a000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x4a000000 0x1b4040>;
-		};
-
-		/* REVISIT: Move to live under l4hs once driver is fixed */
-		mac: ethernet@4a100000 {
-			compatible = "ti,cpsw";
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			reg = <0x4a100000 0x800
-			       0x4a100900 0x100>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-parent = <&intc>;
-			/*
-			 * c0_rx_thresh_pend
-			 * c0_rx_pend
-			 * c0_tx_pend
-			 * c0_misc_pend
-			 */
-			interrupts = <40 41 42 43>;
-			ranges;
-			syscon = <&scm_conf>;
 
-			davinci_mdio: mdio@4a100800 {
-				compatible = "ti,davinci_mdio";
+			target-module@100000 {
+				compatible = "ti,sysc-omap4-simple", "ti,sysc";
+				reg = <0x100900 0x4>,
+				      <0x100908 0x4>,
+				      <0x100904 0x4>;
+				reg-names = "rev", "sysc", "syss";
+				ti,sysc-mask = <0>;
+				ti,sysc-midle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>;
+				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>;
+				ti,syss-mask = <1>;
+				clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
+				clock-names = "fck";
 				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				reg = <0x4a100800 0x100>;
-			};
-
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-				phys = <&phy_gmii_sel 1>;
+				#size-cells = <1>;
+				ranges = <0 0x100000 0x8000>;
+
+				mac: ethernet@0 {
+					compatible = "ti,cpsw";
+					clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+					clock-names = "fck", "cpts";
+					cpdma_channels = <8>;
+					ale_entries = <1024>;
+					bd_ram_size = <0x2000>;
+					mac_control = <0x20>;
+					slaves = <2>;
+					active_slave = <0>;
+					cpts_clock_mult = <0x80000000>;
+					cpts_clock_shift = <29>;
+					reg = <0 0x800>,
+					      <0x900 0x100>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					/*
+					* c0_rx_thresh_pend
+					* c0_rx_pend
+					* c0_tx_pend
+					* c0_misc_pend
+					*/
+					interrupts = <40 41 42 43>;
+					ranges = <0 0 0x8000>;
+					syscon = <&scm_conf>;
+
+					davinci_mdio: mdio@800 {
+						compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
+						clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
+						clock-names = "fck";
+						#address-cells = <1>;
+						#size-cells = <0>;
+						bus_freq = <1000000>;
+						reg = <0x800 0x100>;
+					};
 
-			};
+					cpsw_emac0: slave@200 {
+						/* Filled in by U-Boot */
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 1>;
+					};
 
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-				phys = <&phy_gmii_sel 2>;
+					cpsw_emac1: slave@300 {
+						/* Filled in by U-Boot */
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 2>;
+					};
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi
--- a/arch/arm/boot/dts/dra62x.dtsi
+++ b/arch/arm/boot/dts/dra62x.dtsi
@@ -12,12 +12,12 @@ / {
 
 /* Compared to dm814x, dra62x has different offsets for Ethernet */
 &mac {
-	reg = <0x4a100000 0x800
-		0x4a101200 0x100>;
+	reg = <0 0x800>,
+	      <0x1200 0x100>;
 };
 
 &davinci_mdio {
-	reg = <0x4a101000 0x100>;
+	reg = <0x1000 0x100>;
 };
 
 #include "dra62x-clocks.dtsi"
-- 
2.25.1

[PATCH 03/10] ARM: OMAP2+: Drop legacy platform data for dm814x cpsw

[Tony Lindgren]

We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data.
dts property.

Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 58 ----------------------
 1 file changed, 58 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -867,62 +867,6 @@ static struct omap_hwmod_ocp_if dm816x_l4_ls__timer7 = {
 	.user		= OCP_USER_MPU,
 };
 
-/* CPSW on dm814x */
-static struct omap_hwmod_class_sysconfig dm814x_cpgmac_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x8,
-	.syss_offs	= 0x4,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
-			  SYSS_HAS_RESET_STATUS,
-	.idlemodes	= SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
-			  MSTANDBY_NO,
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class dm814x_cpgmac0_hwmod_class = {
-	.name		= "cpgmac0",
-	.sysc		= &dm814x_cpgmac_sysc,
-};
-
-static struct omap_hwmod dm814x_cpgmac0_hwmod = {
-	.name		= "cpgmac0",
-	.class		= &dm814x_cpgmac0_hwmod_class,
-	.clkdm_name	= "alwon_ethernet_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "cpsw_125mhz_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs = DM81XX_CM_ALWON_ETHERNET_0_CLKCTRL,
-			.modulemode = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_class dm814x_mdio_hwmod_class = {
-	.name		= "davinci_mdio",
-};
-
-static struct omap_hwmod dm814x_mdio_hwmod = {
-	.name		= "davinci_mdio",
-	.class		= &dm814x_mdio_hwmod_class,
-	.clkdm_name	= "alwon_ethernet_clkdm",
-	.main_clk	= "cpsw_125mhz_gclk",
-};
-
-static struct omap_hwmod_ocp_if dm814x_l4_hs__cpgmac0 = {
-	.master		= &dm81xx_l4_hs_hwmod,
-	.slave		= &dm814x_cpgmac0_hwmod,
-	.clk		= "cpsw_125mhz_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if dm814x_cpgmac0__mdio = {
-	.master		= &dm814x_cpgmac0_hwmod,
-	.slave		= &dm814x_mdio_hwmod,
-	.user		= OCP_USER_MPU,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
 /* EMAC Ethernet */
 static struct omap_hwmod_class_sysconfig dm816x_emac_sysc = {
 	.rev_offs	= 0x0,
@@ -1510,8 +1454,6 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
 	&dm81xx_tptc3__alwon_l3_fast,
 	&dm814x_l4_ls__timer1,
 	&dm814x_l4_ls__timer2,
-	&dm814x_l4_hs__cpgmac0,
-	&dm814x_cpgmac0__mdio,
 	&dm81xx_alwon_l3_slow__gpmc,
 	&dm814x_default_l3_slow__usbss,
 	&dm814x_alwon_l3_med__mmc3,
-- 
2.25.1

[PATCH 04/10] ARM: dts: Configure interconnect target module for dm814x tpcc

[Tony Lindgren]

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.

Let's also correct the custom node name to use generic node name dma.

Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm814x.dtsi | 39 ++++++++++++++++++++++-------------
 1 file changed, 25 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -521,21 +521,32 @@ mmc3: mmc@47810000 {
 			reg = <0x47810000 0x1000>;
 		};
 
-		edma: edma@49000000 {
-			compatible = "ti,edma3-tpcc";
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
 			ti,hwmods = "tpcc";
-			reg =	<0x49000000 0x10000>;
-			reg-names = "edma3_cc";
-			interrupts = <12 13 14>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-				   <&edma_tptc2 3>, <&edma_tptc3 0>;
-
-			ti,edma-memcpy-channels = <20 21>;
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <12 13 14>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+				ti,edma-memcpy-channels = <20 21>;
+			};
 		};
 
 		edma_tptc0: tptc@49800000 {
-- 
2.25.1

[PATCH 05/10] ARM: dts: Configure interconnect target module for dm814x tptc0

[Tony Lindgren]

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.

Let's also correct the custom node name to use generic node name dma.

Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm814x.dtsi | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -549,12 +549,28 @@ edma: dma@0 {
 			};
 		};
 
-		edma_tptc0: tptc@49800000 {
-			compatible = "ti,edma3-tptc";
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
 			ti,hwmods = "tptc0";
-			reg =	<0x49800000 0x100000>;
-			interrupts = <112>;
-			interrupt-names = "edma3_tcerrint";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <112>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
 		edma_tptc1: tptc@49900000 {
-- 
2.25.1

[PATCH 06/10] ARM: dts: Configure interconnect target module for dm814x tptc1

[Tony Lindgren]

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.

Let's also correct the custom node name to use generic node name dma.

Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm814x.dtsi | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -573,12 +573,28 @@ edma_tptc0: dma@0 {
 			};
 		};
 
-		edma_tptc1: tptc@49900000 {
-			compatible = "ti,edma3-tptc";
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
 			ti,hwmods = "tptc1";
-			reg =	<0x49900000 0x100000>;
-			interrupts = <113>;
-			interrupt-names = "edma3_tcerrint";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <113>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
 		edma_tptc2: tptc@49a00000 {
-- 
2.25.1

[PATCH 07/10] ARM: dts: Configure interconnect target module for dm814x tptc2

[Tony Lindgren]

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.

Let's also correct the custom node name to use generic node name dma.

Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm814x.dtsi | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -597,12 +597,28 @@ edma_tptc1: dma@0 {
 			};
 		};
 
-		edma_tptc2: tptc@49a00000 {
-			compatible = "ti,edma3-tptc";
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
 			ti,hwmods = "tptc2";
-			reg =	<0x49a00000 0x100000>;
-			interrupts = <114>;
-			interrupt-names = "edma3_tcerrint";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
+
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <114>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
 		edma_tptc3: tptc@49b00000 {
-- 
2.25.1

[PATCH 08/10] ARM: dts: Configure interconnect target module for dm814x tptc3

[Tony Lindgren]

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.

Let's also correct the custom node name to use generic node name dma.

Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm814x.dtsi | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -621,12 +621,28 @@ edma_tptc2: dma@0 {
 			};
 		};
 
-		edma_tptc3: tptc@49b00000 {
-			compatible = "ti,edma3-tptc";
+		target-module@49b00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
 			ti,hwmods = "tptc3";
-			reg =	<0x49b00000 0x100000>;
-			interrupts = <115>;
-			interrupt-names = "edma3_tcerrint";
+			reg = <0x49b00000 0x4>,
+			      <0x49b00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49b00000 0x100000>;
+
+			edma_tptc3: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <115>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
 		/* See TRM "Table 1-318. L4HS Instance Summary" */
-- 
2.25.1

[PATCH 09/10] ARM: dts: Configure interconnect target module for ti816x edma

[Tony Lindgren]

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure edma for
dm816x similar to what we have for dm814x.

Let's initially keep the legacy "ti,hwmods" peroperty, it will be
removed for all ti81xx in a later patch.

Note that as we now also start using the clkctrl clock binding on
dm816x, the board specific dts files must also have compatible
"ti,dm816". This is needed for the clkctrl clocks to probe properly,
so any out of tree dts files may need to be updated accordingly.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm816x.dtsi | 153 ++++++++++++++++++++++++++++++----
 1 file changed, 135 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -4,6 +4,8 @@
  * kind, whether express or implied.
  */
 
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dm816.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/omap.h>
 
@@ -138,13 +140,128 @@ scrm_clockdomains: clockdomains {
 			};
 		};
 
-		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
-			reg =   <0x49000000 0x10000>,
-			        <0x44e10f90 0x40>;
-			interrupts = <12 13 14>;
-			#dma-cells = <1>;
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "tpcc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <12 13 14>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+				ti,edma-memcpy-channels = <20 21>;
+			};
+		};
+
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "tptc0";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <112>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "tptc1";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <113>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "tptc2";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
+
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <114>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49b00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "tptc3";
+			reg = <0x49b00000 0x4>,
+			      <0x49b00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49b00000 0x100000>;
+
+			edma_tptc3: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <115>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
 		elm: elm@48080000 {
@@ -185,7 +302,7 @@ gpmc: gpmc@50000000 {
 			#address-cells = <2>;
 			#size-cells = <1>;
 			interrupts = <100>;
-			dmas = <&edma 52>;
+			dmas = <&edma 52 0>;
 			dma-names = "rxtx";
 			gpmc,num-cs = <6>;
 			gpmc,num-waitpins = <2>;
@@ -202,7 +319,7 @@ i2c1: i2c@48028000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <70>;
-			dmas = <&edma 58 &edma 59>;
+			dmas = <&edma 58 0 &edma 59 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -213,7 +330,7 @@ i2c2: i2c@4802a000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <71>;
-			dmas = <&edma 60 &edma 61>;
+			dmas = <&edma 60 0 &edma 61 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -311,10 +428,10 @@ mcspi1: spi@48030000 {
 			interrupts = <65>;
 			ti,spi-num-cs = <4>;
 			ti,hwmods = "mcspi1";
-			dmas = <&edma 16 &edma 17
-				&edma 18 &edma 19
-				&edma 20 &edma 21
-				&edma 22 &edma 23>;
+			dmas = <&edma 16 0 &edma 17 0
+				&edma 18 0 &edma 19 0
+				&edma 20 0 &edma 21 0
+				&edma 22 0 &edma 23 0>;
 			dma-names = "tx0", "rx0", "tx1", "rx1",
 				    "tx2", "rx2", "tx3", "rx3";
 		};
@@ -324,7 +441,7 @@ mmc1: mmc@48060000 {
 			reg = <0x48060000 0x11000>;
 			ti,hwmods = "mmc1";
 			interrupts = <64>;
-			dmas = <&edma 24 &edma 25>;
+			dmas = <&edma 24 0 &edma 25 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -392,7 +509,7 @@ uart1: uart@48020000 {
 			reg = <0x48020000 0x2000>;
 			clock-frequency = <48000000>;
 			interrupts = <72>;
-			dmas = <&edma 26 &edma 27>;
+			dmas = <&edma 26 0 &edma 27 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -402,7 +519,7 @@ uart2: uart@48022000 {
 			reg = <0x48022000 0x2000>;
 			clock-frequency = <48000000>;
 			interrupts = <73>;
-			dmas = <&edma 28 &edma 29>;
+			dmas = <&edma 28 0 &edma 29 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -412,7 +529,7 @@ uart3: uart@48024000 {
 			reg = <0x48024000 0x2000>;
 			clock-frequency = <48000000>;
 			interrupts = <74>;
-			dmas = <&edma 30 &edma 31>;
+			dmas = <&edma 30 0 &edma 31 0>;
 			dma-names = "tx", "rx";
 		};
 
-- 
2.25.1

[PATCH 10/10] ARM: OMAP2+: Drop legacy platform data for ti81xx edma

[Tony Lindgren]

We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.

As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm814x.dtsi              |   5 -
 arch/arm/boot/dts/dm816x.dtsi              |   5 -
 arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 173 ---------------------
 3 files changed, 183 deletions(-)

diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -523,7 +523,6 @@ mmc3: mmc@47810000 {
 
 		target-module@49000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "tpcc";
 			reg = <0x49000000 0x4>;
 			reg-names = "rev";
 			clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>;
@@ -551,7 +550,6 @@ edma: dma@0 {
 
 		target-module@49800000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "tptc0";
 			reg = <0x49800000 0x4>,
 			      <0x49800010 0x4>;
 			reg-names = "rev", "sysc";
@@ -575,7 +573,6 @@ edma_tptc0: dma@0 {
 
 		target-module@49900000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "tptc1";
 			reg = <0x49900000 0x4>,
 			      <0x49900010 0x4>;
 			reg-names = "rev", "sysc";
@@ -599,7 +596,6 @@ edma_tptc1: dma@0 {
 
 		target-module@49a00000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "tptc2";
 			reg = <0x49a00000 0x4>,
 			      <0x49a00010 0x4>;
 			reg-names = "rev", "sysc";
@@ -623,7 +619,6 @@ edma_tptc2: dma@0 {
 
 		target-module@49b00000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "tptc3";
 			reg = <0x49b00000 0x4>,
 			      <0x49b00010 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -142,7 +142,6 @@ scrm_clockdomains: clockdomains {
 
 		target-module@49000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "tpcc";
 			reg = <0x49000000 0x4>;
 			reg-names = "rev";
 			clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>;
@@ -170,7 +169,6 @@ edma: dma@0 {
 
 		target-module@49800000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "tptc0";
 			reg = <0x49800000 0x4>,
 			      <0x49800010 0x4>;
 			reg-names = "rev", "sysc";
@@ -194,7 +192,6 @@ edma_tptc0: dma@0 {
 
 		target-module@49900000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "tptc1";
 			reg = <0x49900000 0x4>,
 			      <0x49900010 0x4>;
 			reg-names = "rev", "sysc";
@@ -218,7 +215,6 @@ edma_tptc1: dma@0 {
 
 		target-module@49a00000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "tptc2";
 			reg = <0x49a00000 0x4>,
 			      <0x49a00010 0x4>;
 			reg-names = "rev", "sysc";
@@ -242,7 +238,6 @@ edma_tptc2: dma@0 {
 
 		target-module@49b00000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "tptc3";
 			reg = <0x49b00000 0x4>,
 			      <0x49b00010 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -129,13 +129,6 @@ static struct omap_hwmod dm81xx_alwon_l3_med_hwmod = {
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-static struct omap_hwmod dm81xx_alwon_l3_fast_hwmod = {
-	.name		= "l3_fast",
-	.clkdm_name	= "alwon_l3_fast_clkdm",
-	.class		= &l3_hwmod_class,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
 /*
  * L4 standard peripherals, see TRM table 1-12 for devices using this.
  * See TRM table 1-73 for devices using the 125MHz SYSCLK6 clock.
@@ -1265,154 +1258,6 @@ static struct omap_hwmod_ocp_if dm81xx_l4_ls__spinbox = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_class dm81xx_tpcc_hwmod_class = {
-	.name		= "tpcc",
-};
-
-static struct omap_hwmod dm81xx_tpcc_hwmod = {
-	.name		= "tpcc",
-	.class		= &dm81xx_tpcc_hwmod_class,
-	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "sysclk4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= DM81XX_CM_ALWON_TPCC_CLKCTRL,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tpcc = {
-	.master		= &dm81xx_alwon_l3_fast_hwmod,
-	.slave		= &dm81xx_tpcc_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_class dm81xx_tptc0_hwmod_class = {
-	.name		= "tptc0",
-};
-
-static struct omap_hwmod dm81xx_tptc0_hwmod = {
-	.name		= "tptc0",
-	.class		= &dm81xx_tptc0_hwmod_class,
-	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "sysclk4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= DM81XX_CM_ALWON_TPTC0_CLKCTRL,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc0 = {
-	.master		= &dm81xx_alwon_l3_fast_hwmod,
-	.slave		= &dm81xx_tptc0_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if dm81xx_tptc0__alwon_l3_fast = {
-	.master		= &dm81xx_tptc0_hwmod,
-	.slave		= &dm81xx_alwon_l3_fast_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_class dm81xx_tptc1_hwmod_class = {
-	.name		= "tptc1",
-};
-
-static struct omap_hwmod dm81xx_tptc1_hwmod = {
-	.name		= "tptc1",
-	.class		= &dm81xx_tptc1_hwmod_class,
-	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "sysclk4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= DM81XX_CM_ALWON_TPTC1_CLKCTRL,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc1 = {
-	.master		= &dm81xx_alwon_l3_fast_hwmod,
-	.slave		= &dm81xx_tptc1_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if dm81xx_tptc1__alwon_l3_fast = {
-	.master		= &dm81xx_tptc1_hwmod,
-	.slave		= &dm81xx_alwon_l3_fast_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_class dm81xx_tptc2_hwmod_class = {
-	.name		= "tptc2",
-};
-
-static struct omap_hwmod dm81xx_tptc2_hwmod = {
-	.name		= "tptc2",
-	.class		= &dm81xx_tptc2_hwmod_class,
-	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "sysclk4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= DM81XX_CM_ALWON_TPTC2_CLKCTRL,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc2 = {
-	.master		= &dm81xx_alwon_l3_fast_hwmod,
-	.slave		= &dm81xx_tptc2_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if dm81xx_tptc2__alwon_l3_fast = {
-	.master		= &dm81xx_tptc2_hwmod,
-	.slave		= &dm81xx_alwon_l3_fast_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_class dm81xx_tptc3_hwmod_class = {
-	.name		= "tptc3",
-};
-
-static struct omap_hwmod dm81xx_tptc3_hwmod = {
-	.name		= "tptc3",
-	.class		= &dm81xx_tptc3_hwmod_class,
-	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "sysclk4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= DM81XX_CM_ALWON_TPTC3_CLKCTRL,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc3 = {
-	.master		= &dm81xx_alwon_l3_fast_hwmod,
-	.slave		= &dm81xx_tptc3_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = {
-	.master		= &dm81xx_tptc3_hwmod,
-	.slave		= &dm81xx_alwon_l3_fast_hwmod,
-	.clk		= "sysclk4_ck",
-	.user		= OCP_USER_MPU,
-};
-
 /*
  * REVISIT: Test and enable the following once clocks work:
  * dm81xx_l4_ls__mailbox
@@ -1443,15 +1288,6 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
 	&dm814x_l4_ls__mmc1,
 	&dm814x_l4_ls__mmc2,
 	&ti81xx_l4_ls__rtc,
-	&dm81xx_alwon_l3_fast__tpcc,
-	&dm81xx_alwon_l3_fast__tptc0,
-	&dm81xx_alwon_l3_fast__tptc1,
-	&dm81xx_alwon_l3_fast__tptc2,
-	&dm81xx_alwon_l3_fast__tptc3,
-	&dm81xx_tptc0__alwon_l3_fast,
-	&dm81xx_tptc1__alwon_l3_fast,
-	&dm81xx_tptc2__alwon_l3_fast,
-	&dm81xx_tptc3__alwon_l3_fast,
 	&dm814x_l4_ls__timer1,
 	&dm814x_l4_ls__timer2,
 	&dm81xx_alwon_l3_slow__gpmc,
@@ -1496,15 +1332,6 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
 	&dm81xx_emac0__mdio,
 	&dm816x_l4_hs__emac1,
 	&dm81xx_l4_hs__sata,
-	&dm81xx_alwon_l3_fast__tpcc,
-	&dm81xx_alwon_l3_fast__tptc0,
-	&dm81xx_alwon_l3_fast__tptc1,
-	&dm81xx_alwon_l3_fast__tptc2,
-	&dm81xx_alwon_l3_fast__tptc3,
-	&dm81xx_tptc0__alwon_l3_fast,
-	&dm81xx_tptc1__alwon_l3_fast,
-	&dm81xx_tptc2__alwon_l3_fast,
-	&dm81xx_tptc3__alwon_l3_fast,
 	&dm81xx_alwon_l3_slow__gpmc,
 	&dm816x_default_l3_slow__usbss,
 	NULL,
-- 
2.25.1