* [PATCH AUTOSEL 5.5 08/41] ARM: dts: dra7-l4: mark timer13-16 as pwm capable
[not found] <20200316023319.749-1-sashal@kernel.org>
@ 2020-03-16 2:32 ` Sasha Levin
2020-03-16 2:32 ` [PATCH AUTOSEL 5.5 14/41] ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes Sasha Levin
1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2020-03-16 2:32 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Grygorii Strashko, Lokesh Vutla, Tony Lindgren, Sasha Levin,
linux-omap, devicetree
From: Grygorii Strashko <grygorii.strashko@ti.com>
[ Upstream commit 00a39c92c8ab94727f021297d1748531af113fcd ]
DMTimers 13 - 16 are PWM capable and also can be used for CPTS input
signals generation. Hence, mark them as "ti,timer-pwm".
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/dra7-l4.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 7e7aa101d8a49..912ee8778830a 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3461,6 +3461,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
};
};
@@ -3489,6 +3490,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
};
};
@@ -3517,6 +3519,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
};
};
@@ -3545,6 +3548,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
};
};
--
2.20.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH AUTOSEL 5.5 14/41] ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
[not found] <20200316023319.749-1-sashal@kernel.org>
2020-03-16 2:32 ` [PATCH AUTOSEL 5.5 08/41] ARM: dts: dra7-l4: mark timer13-16 as pwm capable Sasha Levin
@ 2020-03-16 2:32 ` Sasha Levin
1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2020-03-16 2:32 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Kishon Vijay Abraham I, Tony Lindgren, Sasha Levin, linux-omap,
devicetree
From: Kishon Vijay Abraham I <kishon@ti.com>
[ Upstream commit 27f13774654ea6bd0b6fc9b97cce8d19e5735661 ]
'dma-ranges' in a PCI bridge node does correctly set dma masks for PCI
devices not described in the DT. Certain DRA7 platforms (e.g., DRA76)
has RAM above 32-bit boundary (accessible with LPAE config) though the
PCIe bridge will be able to access only 32-bits. Add 'dma-ranges'
property in PCIe RC DT nodes to indicate the host bridge can access
only 32 bits.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/dra7.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 73e5011f531ab..c5af7530be7c8 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -184,6 +184,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
@@ -238,6 +239,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
--
2.20.1
^ permalink raw reply related [flat|nested] 2+ messages in thread