Linux-OMAP Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 00/18] genirq: Remove setup_irq()
@ 2020-02-12  8:01 afzal mohammed
  2020-02-12  8:02 ` [PATCH 02/18] ARM: replace setup_irq() by request_irq() afzal mohammed
  2020-02-27 10:31 ` [PATCH 00/18] genirq: Remove setup_irq() Thomas Gleixner
  0 siblings, 2 replies; 11+ messages in thread
From: afzal mohammed @ 2020-02-12  8:01 UTC (permalink / raw)
  To: linux-kernel, linux-rpi-kernel, linux-arm-kernel,
	linux-samsung-soc, x86, linux-sh, linux-s390, linuxppc-dev,
	linux-parisc, linux-mips, linux-m68k, linux-ia64, linux-hexagon,
	linux-c6x-dev, linux-omap, linux-alpha
  Cc: Thomas Gleixner, Julia Lawall, Gilles Muller, Nicolas Palix,
	Michal Marek

While trying to understand internals of irq handling, came across a
thread [1] in which tglx was referring to avoid usage of setup_irq().
Existing callers of setup_irq() reached mostly via 'init_IRQ()' &
'time_init()', while memory allocators are ready by 'mm_init()'.

Hence instances of setup_irq() is replaced by request_irq() &
setup_irq() (along with remove_irq()) definition deleted in the last
patch.

Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().

Build & boot tested on ARM & x86_64 platforms (ensured that on the
machines used for testing there was an existing setup_irq()
invocation occuring at runtime)

Much of the changes were created using Coccinelle with an intention
to learn it. spatch command was directly run w/ semantic patch below.
But not everything could be automated.

Searching with 'git grep -n '\Wsetup_irq('' & avoiding the irrelevant
ones, 153 invocation's of setup_irq() were found. 112 could be replaced
w/ cocci, of which in a few files some desired hunks were missing or
not as expected, these were fixed up manually. Also the remaining 41
had to be done manually.

Although cocci could replace 112, because of line continue not
happening at paranthesis for request_irq(), around 80 had to be
manually aligned in the request_irq() statement. Problem was with my
below cocci snippet,

- setup_irq(E1,&act);
+ if (request_irq(E1,f_handler,f_flags,f_name,f_dev_id))
+ 	pr_err("request_irq() on %s failed\n", f_name);

Instead of the above, if below is used, line continue happens exactly
at paranthesis, but it lacks addition of printing on request_irq()
failure where existing setup_irq() failure was not doing it.

- setup_irq(E1,&act)
+ request_irq(E1,f_handler,f_flags,f_name,f_dev_id)

Above had an additional advantage of replacing instances of
if (setup_irq()) & BUG(setup_irq()), but luckily those instances were
very few.

So though many changes could be automated, there are a considerable
amount of manual changes, please review carefully especially mips &
alpha.

Usage of setup_percpu_irq() is untouched w/ this series.

There are 2 checkpatch warning about usage of BUG() [which was already
there w/ setup_irq()], they are left as is as it seems appropriate for
tick timer interrupt.

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

--->8---

@r1@
identifier ret;
@@

(
setup_irq(...);
|
ret = setup_irq(...);
)


@r2 depends on r1@
identifier act;
@@

static struct irqaction act = {
};

@r11 depends on r2@
identifier r2.act;
identifier f_handler;
@@

(
- act.handler = f_handler;
|
static struct irqaction act = {
 .handler = f_handler,
};
)

@r12 depends on r2@
identifier r2.act;
expression f_name;
@@

(
- act.name = f_name;
|
static struct irqaction act = {
 .name = f_name,
};
)

@r15 depends on r2@
identifier r2.act;
expression f_dev_id;
@@

(
- act.dev_id = f_dev_id;
|
static struct irqaction act = {
 .dev_id = f_dev_id,
};
)

@r16 depends on r2@
identifier r2.act;
expression f_flags;
@@

(
- act.flags = f_flags;
|
static struct irqaction act = {
 .flags = f_flags,
};
)

@r21 depends on r2@
identifier r2.act;
@@

- static struct irqaction act = {
- ...
- };

@r22 depends on r2 && r11 && r12 && r15 && r16@
identifier r2.act;
identifier r11.f_handler;
expression r12.f_name;
expression r15.f_dev_id;
expression r16.f_flags;
expression E1;
identifier ret;
@@

(
- setup_irq(E1,&act);
+ if (request_irq(E1,f_handler,f_flags,f_name,f_dev_id))
+ 	pr_err("request_irq() on %s failed\n", f_name);
|
- ret = setup_irq(E1,&act);
+ ret = request_irq(E1,f_handler,f_flags,f_name,f_dev_id);
)

@r23 depends on r2 && r11 && r12 && !r15 && r16@
identifier r2.act;
identifier r11.f_handler;
expression r12.f_name;
expression r16.f_flags;
expression E1;
identifier ret;
@@

(
- setup_irq(E1,&act);
+ if (request_irq(E1,f_handler,f_flags,f_name,NULL))
+ 	pr_err("request_irq() on %s failed\n", f_name);
|
- ret = setup_irq(E1,&act);
+ ret = request_irq(E1,f_handler,f_flags,f_name,NULL);
)

@r24 depends on r2 && r11 && r12 && r15 && !r16@
identifier r2.act;
identifier r11.f_handler;
expression r12.f_name;
expression r15.f_dev_id;
expression E1;
identifier ret;
@@

(
- setup_irq(E1,&act);
+ if (request_irq(E1,f_handler,0,f_name,f_dev_id))
+ 	pr_err("request_irq() on %s failed\n", f_name);
|
- ret = setup_irq(E1,&act);
+ ret = request_irq(E1,f_handler,0,f_name,f_dev_id);
)

@r25 depends on r2 && r11 && r12 && !r15 && !r16@
identifier r2.act;
identifier r11.f_handler;
expression r12.f_name;
expression E1;
identifier ret;
@@

(
- setup_irq(E1,&act);
+ if (request_irq(E1,f_handler,0,f_name,NULL))
+ 	pr_err("request_irq() on %s failed\n", f_name);
|
- ret = setup_irq(E1,&act);
+ ret = request_irq(E1,f_handler,0,f_name,NULL);
)

--->8---

afzal mohammed (18):
  alpha: replace setup_irq() by request_irq()
  ARM: replace setup_irq() by request_irq()
  c6x: replace setup_irq() by request_irq()
  hexagon: replace setup_irq() by request_irq()
  ia64: replace setup_irq() by request_irq()
  m68k: Replace setup_irq() by request_irq()
  microblaze: Replace setup_irq() by request_irq()
  MIPS: Replace setup_irq() by request_irq()
  parisc: Replace setup_irq() by request_irq()
  powerpc: Replace setup_irq() by request_irq()
  s390: replace setup_irq() by request_irq()
  sh: replace setup_irq() by request_irq()
  unicore32: replace setup_irq() by request_irq()
  x86: Replace setup_irq() by request_irq()
  xtensa: replace setup_irq() by request_irq()
  clocksource: Replace setup_irq() by request_irq()
  irqchip: Replace setup_irq() by request_irq()
  genirq: Remove setup_irq() and remove_irq()

 arch/alpha/kernel/irq_alpha.c                 | 29 ++-------
 arch/alpha/kernel/irq_i8259.c                 |  8 +--
 arch/alpha/kernel/irq_impl.h                  |  7 +--
 arch/alpha/kernel/irq_pyxis.c                 |  3 +-
 arch/alpha/kernel/sys_alcor.c                 |  3 +-
 arch/alpha/kernel/sys_cabriolet.c             |  3 +-
 arch/alpha/kernel/sys_eb64p.c                 |  3 +-
 arch/alpha/kernel/sys_marvel.c                |  2 +-
 arch/alpha/kernel/sys_miata.c                 |  6 +-
 arch/alpha/kernel/sys_ruffian.c               |  3 +-
 arch/alpha/kernel/sys_rx164.c                 |  3 +-
 arch/alpha/kernel/sys_sx164.c                 |  3 +-
 arch/alpha/kernel/sys_wildfire.c              |  7 +--
 arch/alpha/kernel/time.c                      |  6 +-
 arch/arm/mach-cns3xxx/core.c                  | 10 +---
 arch/arm/mach-ebsa110/core.c                  | 10 +---
 arch/arm/mach-ep93xx/timer-ep93xx.c           | 12 ++--
 arch/arm/mach-footbridge/dc21285-timer.c      | 11 +---
 arch/arm/mach-footbridge/isa-irq.c            |  8 +--
 arch/arm/mach-footbridge/isa-timer.c          | 11 +---
 arch/arm/mach-iop32x/time.c                   | 12 ++--
 arch/arm/mach-mmp/time.c                      | 11 +---
 arch/arm/mach-omap1/pm.c                      | 22 ++++---
 arch/arm/mach-omap1/time.c                    | 10 +---
 arch/arm/mach-omap1/timer32k.c                | 10 +---
 arch/arm/mach-omap2/timer.c                   | 11 +---
 arch/arm/mach-rpc/time.c                      |  8 +--
 arch/arm/mach-spear/time.c                    |  9 +--
 arch/arm/plat-orion/time.c                    | 10 +---
 arch/c6x/platforms/timer64.c                  | 11 +---
 arch/hexagon/kernel/smp.c                     | 17 +++---
 arch/hexagon/kernel/time.c                    | 11 +---
 arch/ia64/kernel/irq_ia64.c                   | 42 +++++--------
 arch/ia64/kernel/mca.c                        | 51 +++++-----------
 arch/m68k/68000/timers.c                      |  9 +--
 arch/m68k/coldfire/pit.c                      |  9 +--
 arch/m68k/coldfire/sltimers.c                 | 19 ++----
 arch/m68k/coldfire/timers.c                   | 19 ++----
 arch/microblaze/kernel/timer.c                | 10 +---
 arch/mips/alchemy/common/time.c               | 11 +---
 arch/mips/ar7/irq.c                           | 18 +++---
 arch/mips/ath25/ar2315.c                      |  9 +--
 arch/mips/ath25/ar5312.c                      |  9 +--
 arch/mips/bcm63xx/irq.c                       | 38 +++++-------
 arch/mips/cobalt/irq.c                        | 14 ++---
 arch/mips/dec/setup.c                         | 59 ++++++++-----------
 arch/mips/emma/markeins/irq.c                 | 20 +++----
 arch/mips/include/asm/sni.h                   |  2 +-
 arch/mips/jazz/irq.c                          | 12 +---
 arch/mips/kernel/cevt-bcm1480.c               | 11 +---
 arch/mips/kernel/cevt-ds1287.c                |  9 +--
 arch/mips/kernel/cevt-gt641xx.c               |  9 +--
 arch/mips/kernel/cevt-r4k.c                   |  4 +-
 arch/mips/kernel/cevt-sb1250.c                | 11 +---
 arch/mips/kernel/cevt-txx9.c                  | 11 +---
 arch/mips/kernel/i8253.c                      | 10 +---
 arch/mips/kernel/rtlx-mt.c                    |  8 +--
 arch/mips/kernel/smp.c                        | 33 ++++-------
 arch/mips/lasat/interrupt.c                   | 10 +---
 arch/mips/loongson2ef/common/bonito-irq.c     |  9 +--
 .../loongson2ef/common/cs5536/cs5536_mfgpt.c  | 10 +---
 arch/mips/loongson2ef/fuloong-2e/irq.c        | 14 ++---
 arch/mips/loongson2ef/lemote-2f/irq.c         | 20 ++-----
 arch/mips/loongson32/common/irq.c             | 21 ++++---
 arch/mips/loongson32/common/time.c            | 12 ++--
 arch/mips/loongson64/hpet.c                   | 10 +---
 arch/mips/mti-malta/malta-int.c               | 10 +---
 arch/mips/netlogic/xlr/fmn.c                  |  9 +--
 arch/mips/pmcs-msp71xx/msp_irq.c              | 28 ++++-----
 arch/mips/pmcs-msp71xx/msp_smp.c              | 22 ++-----
 arch/mips/pmcs-msp71xx/msp_time.c             |  7 ++-
 arch/mips/ralink/cevt-rt3352.c                | 17 +++---
 arch/mips/sgi-ip22/ip22-eisa.c                |  8 +--
 arch/mips/sgi-ip22/ip22-int.c                 | 49 +++++----------
 arch/mips/sgi-ip32/ip32-irq.c                 | 18 ++----
 arch/mips/sni/a20r.c                          |  4 +-
 arch/mips/sni/irq.c                           |  8 +--
 arch/mips/sni/pcit.c                          |  8 ++-
 arch/mips/sni/rm200.c                         | 23 +++-----
 arch/mips/sni/time.c                          | 10 +---
 arch/mips/vr41xx/common/irq.c                 |  9 +--
 arch/parisc/kernel/irq.c                      | 21 ++-----
 arch/powerpc/platforms/85xx/mpc85xx_cds.c     | 10 +---
 arch/powerpc/platforms/8xx/cpm1.c             |  9 +--
 arch/powerpc/platforms/8xx/m8xx_setup.c       |  9 +--
 arch/powerpc/platforms/chrp/setup.c           | 14 ++---
 arch/powerpc/platforms/powermac/pic.c         | 31 ++++------
 arch/powerpc/platforms/powermac/smp.c         |  9 +--
 arch/s390/kernel/irq.c                        |  8 +--
 arch/sh/boards/mach-cayman/irq.c              | 18 ++----
 arch/sh/drivers/dma/dma-pvr2.c                |  9 +--
 arch/unicore32/kernel/time.c                  | 11 +---
 arch/x86/kernel/irqinit.c                     | 18 +++---
 arch/x86/kernel/time.c                        | 10 +---
 arch/xtensa/kernel/smp.c                      |  8 +--
 arch/xtensa/kernel/time.c                     | 10 +---
 drivers/clocksource/bcm2835_timer.c           |  8 +--
 drivers/clocksource/bcm_kona_timer.c          | 10 +---
 drivers/clocksource/dw_apb_timer.c            | 11 +---
 drivers/clocksource/exynos_mct.c              | 12 ++--
 drivers/clocksource/mxs_timer.c               | 10 +---
 drivers/clocksource/nomadik-mtu.c             | 11 +---
 drivers/clocksource/samsung_pwm_timer.c       | 12 ++--
 drivers/clocksource/timer-atlas7.c            | 50 ++++++++--------
 drivers/clocksource/timer-cs5535.c            | 10 +---
 drivers/clocksource/timer-efm32.c             | 10 +---
 drivers/clocksource/timer-fsl-ftm.c           | 10 +---
 drivers/clocksource/timer-imx-gpt.c           | 10 +---
 drivers/clocksource/timer-integrator-ap.c     | 11 +---
 drivers/clocksource/timer-meson6.c            | 11 +---
 drivers/clocksource/timer-orion.c             |  9 +--
 drivers/clocksource/timer-prima2.c            | 11 +---
 drivers/clocksource/timer-pxa.c               | 10 +---
 drivers/clocksource/timer-sp804.c             | 11 +---
 drivers/clocksource/timer-u300.c              |  9 +--
 drivers/clocksource/timer-vf-pit.c            | 10 +---
 drivers/clocksource/timer-vt8500.c            | 11 +---
 drivers/clocksource/timer-zevio.c             | 13 ++--
 drivers/irqchip/irq-i8259.c                   |  9 +--
 drivers/irqchip/irq-ingenic.c                 | 11 ++--
 drivers/parisc/eisa.c                         |  8 +--
 drivers/s390/cio/airq.c                       |  8 +--
 drivers/s390/cio/cio.c                        |  8 +--
 include/linux/dw_apb_timer.h                  |  1 -
 include/linux/irq.h                           |  2 -
 kernel/irq/manage.c                           | 44 --------------
 126 files changed, 528 insertions(+), 1111 deletions(-)


base-commit: v5.6-rc1
-- 
2.24.1

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 02/18] ARM: replace setup_irq() by request_irq()
  2020-02-12  8:01 [PATCH 00/18] genirq: Remove setup_irq() afzal mohammed
@ 2020-02-12  8:02 ` afzal mohammed
  2020-02-12  8:10   ` Viresh Kumar
  2020-02-12 23:27   ` Alexander Sverdlin
  2020-02-27 10:31 ` [PATCH 00/18] genirq: Remove setup_irq() Thomas Gleixner
  1 sibling, 2 replies; 11+ messages in thread
From: afzal mohammed @ 2020-02-12  8:02 UTC (permalink / raw)
  To: linux-arm-kernel, linux-kernel, linux-omap
  Cc: Krzysztof Halasa, Russell King, Hartley Sweeten,
	Alexander Sverdlin, Lubomir Rintel, Kevin Hilman, Aaro Koskinen,
	Tony Lindgren, Viresh Kumar, Shiraz Hashim, Jason Cooper,
	Andrew Lunn, Sebastian Hesselbarth, Gregory Clement,
	Allison Randal, Greg Kroah-Hartman, Thomas Gleixner,
	Arnd Bergmann, Enrico Weigelt

request_irq() is preferred over setup_irq(). Existing callers of
setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
memory allocators are ready by 'mm_init()'.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---

Since cc'ing cover letter to all maintainers/reviewers would be too
many, refer for cover letter,
 https://lkml.kernel.org/r/cover.1581478323.git.afzal.mohd.ma@gmail.com

 arch/arm/mach-cns3xxx/core.c             | 10 +++-------
 arch/arm/mach-ebsa110/core.c             | 10 +++-------
 arch/arm/mach-ep93xx/timer-ep93xx.c      | 12 ++++--------
 arch/arm/mach-footbridge/dc21285-timer.c | 11 +++--------
 arch/arm/mach-footbridge/isa-irq.c       |  8 ++------
 arch/arm/mach-footbridge/isa-timer.c     | 11 +++--------
 arch/arm/mach-iop32x/time.c              | 12 ++++--------
 arch/arm/mach-mmp/time.c                 | 11 +++--------
 arch/arm/mach-omap1/pm.c                 | 22 +++++++++++++---------
 arch/arm/mach-omap1/time.c               | 10 +++-------
 arch/arm/mach-omap1/timer32k.c           | 10 +++-------
 arch/arm/mach-omap2/timer.c              | 11 +++--------
 arch/arm/mach-rpc/time.c                 |  8 ++------
 arch/arm/mach-spear/time.c               |  9 ++-------
 arch/arm/plat-orion/time.c               | 10 +++-------
 15 files changed, 54 insertions(+), 111 deletions(-)

diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 1d61a7701c11..2e8d0062ea72 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -189,12 +189,6 @@ static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction cns3xxx_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= cns3xxx_timer_interrupt,
-};
-
 /*
  * Set up the clock source and clock events devices
  */
@@ -245,7 +239,9 @@ static void __init __cns3xxx_timer_init(unsigned int timer_irq)
 	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
 
 	/* Make irqs happen for the system timer */
-	setup_irq(timer_irq, &cns3xxx_timer_irq);
+	if (request_irq(timer_irq, cns3xxx_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "timer", NULL))
+		pr_err("request_irq() on %s failed\n", "timer");
 
 	cns3xxx_clockevents_init(timer_irq);
 }
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index da2ff4f61d6b..cf79aa7637fc 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -201,12 +201,6 @@ ebsa110_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ebsa110_timer_irq = {
-	.name		= "EBSA110 Timer Tick",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ebsa110_timer_interrupt,
-};
-
 /*
  * Set up timer interrupt.
  */
@@ -221,7 +215,9 @@ void __init ebsa110_timer_init(void)
 	__raw_writeb(COUNT & 0xff, PIT_T1);
 	__raw_writeb(COUNT >> 8, PIT_T1);
 
-	setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq);
+	if (request_irq(IRQ_EBSA110_TIMER0, ebsa110_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "EBSA110 Timer Tick", NULL))
+		pr_err("request_irq() on %s failed\n", "EBSA110 Timer Tick");
 }
 
 static struct plat_serial8250_port serial_platform_data[] = {
diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
index de998830f534..0335f3b93340 100644
--- a/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ b/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -117,13 +117,6 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ep93xx_timer_irq = {
-	.name		= "ep93xx timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ep93xx_timer_interrupt,
-	.dev_id		= &ep93xx_clockevent,
-};
-
 void __init ep93xx_timer_init(void)
 {
 	/* Enable and register clocksource and sched_clock on timer 4 */
@@ -136,7 +129,10 @@ void __init ep93xx_timer_init(void)
 			     EP93XX_TIMER4_RATE);
 
 	/* Set up clockevent on timer 3 */
-	setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
+	if (request_irq(IRQ_EP93XX_TIMER3, ep93xx_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "ep93xx timer",
+			&ep93xx_clockevent))
+		pr_err("request_irq() on %s failed\n", "ep93xx timer");
 	clockevents_config_and_register(&ep93xx_clockevent,
 					EP93XX_TIMER123_RATE,
 					1,
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index f76212d2dbf1..151b8a76896f 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -101,13 +101,6 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction footbridge_timer_irq = {
-	.name		= "dc21285_timer1",
-	.handler	= timer1_interrupt,
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.dev_id		= &ckevt_dc21285,
-};
-
 /*
  * Set up timer interrupt.
  */
@@ -118,7 +111,9 @@ void __init footbridge_timer_init(void)
 
 	clocksource_register_hz(&cksrc_dc21285, rate);
 
-	setup_irq(ce->irq, &footbridge_timer_irq);
+	if (request_irq(ce->irq, timer1_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"dc21285_timer1", &ckevt_dc21285))
+		pr_err("request_irq() on %s failed\n", "dc21285_timer1");
 
 	ce->cpumask = cpumask_of(smp_processor_id());
 	clockevents_config_and_register(ce, rate, 0x4, 0xffffff);
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index 88a553932c33..85f1c3cad83e 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -96,11 +96,6 @@ static void isa_irq_handler(struct irq_desc *desc)
 	generic_handle_irq(isa_irq);
 }
 
-static struct irqaction irq_cascade = {
-	.handler = no_action,
-	.name = "cascade",
-};
-
 static struct resource pic1_resource = {
 	.name	= "pic1",
 	.start	= 0x20,
@@ -160,7 +155,8 @@ void __init isa_init_irq(unsigned int host_irq)
 
 		request_resource(&ioport_resource, &pic1_resource);
 		request_resource(&ioport_resource, &pic2_resource);
-		setup_irq(IRQ_ISA_CASCADE, &irq_cascade);
+		if (request_irq(IRQ_ISA_CASCADE, no_action, 0, "cascade", NULL))
+			pr_err("request_irq() on %s failed\n", "cascade");
 
 		irq_set_chained_handler(host_irq, isa_irq_handler);
 
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index 82f45591fb2c..3c1aed290fde 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -25,17 +25,12 @@ static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction pit_timer_irq = {
-	.name		= "pit",
-	.handler	= pit_timer_interrupt,
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.dev_id		= &i8253_clockevent,
-};
-
 void __init isa_timer_init(void)
 {
 	clocksource_i8253_init();
 
-	setup_irq(i8253_clockevent.irq, &pit_timer_irq);
+	if (request_irq(i8253_clockevent.irq, pit_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "pit", &i8253_clockevent))
+		pr_err("request_irq() on %s failed\n", "pit");
 	clockevent_i8253_init(false);
 }
diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c
index 18a4df5c1baa..241637fcffff 100644
--- a/arch/arm/mach-iop32x/time.c
+++ b/arch/arm/mach-iop32x/time.c
@@ -137,13 +137,6 @@ iop_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction iop_timer_irq = {
-	.name		= "IOP Timer Tick",
-	.handler	= iop_timer_interrupt,
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.dev_id		= &iop_clockevent,
-};
-
 static unsigned long iop_tick_rate;
 unsigned long get_iop_tick_rate(void)
 {
@@ -168,7 +161,10 @@ void __init iop_init_time(unsigned long tick_rate)
 	 */
 	write_tmr0(timer_ctl & ~IOP_TMR_EN);
 	write_tisr(1);
-	setup_irq(IRQ_IOP32X_TIMER0, &iop_timer_irq);
+	if (request_irq(IRQ_IOP32X_TIMER0, iop_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "IOP Timer Tick",
+			&iop_clockevent))
+		pr_err("request_irq() on %s failed\n", "IOP Timer Tick");
 	iop_clockevent.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&iop_clockevent, tick_rate,
 					0xf, 0xfffffffe);
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index c65cfc1ad99b..a5f157b4b981 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -175,13 +175,6 @@ static void __init timer_config(void)
 	__raw_writel(0x2, mmp_timer_base + TMR_CER);
 }
 
-static struct irqaction timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= timer_interrupt,
-	.dev_id		= &ckevt,
-};
-
 void __init mmp_timer_init(int irq, unsigned long rate)
 {
 	timer_config();
@@ -190,7 +183,9 @@ void __init mmp_timer_init(int irq, unsigned long rate)
 
 	ckevt.cpumask = cpumask_of(0);
 
-	setup_irq(irq, &timer_irq);
+	if (request_irq(irq, timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"timer", &ckevt))
+		pr_err("request_irq() on %s failed\n", "timer");
 
 	clocksource_register_hz(&cksrc, rate);
 	clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index d068958d6f8a..ae03fae5b75d 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -596,11 +596,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_wakeup_irq = {
-	.name		= "peripheral wakeup",
-	.handler	= omap_wakeup_interrupt
-};
-
 
 
 static const struct platform_suspend_ops omap_pm_ops = {
@@ -655,10 +650,19 @@ static int __init omap_pm_init(void)
 
 	arm_pm_idle = omap1_pm_idle;
 
-	if (cpu_is_omap7xx())
-		setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
-	else if (cpu_is_omap16xx())
-		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+	if (cpu_is_omap7xx()) {
+		if (request_irq(INT_7XX_WAKE_UP_REQ, omap_wakeup_interrupt, 0,
+				"peripheral wakeup", NULL)) {
+			pr_err("request_irq() on %s failed\n",
+			       "peripheral wakeup");
+		}
+	} else if (cpu_is_omap16xx()) {
+		if (request_irq(INT_1610_WAKE_UP_REQ, omap_wakeup_interrupt, 0,
+				"peripheral wakeup", NULL)) {
+			pr_err("request_irq() on %s failed\n",
+			       "peripheral wakeup");
+		}
+	}
 
 	/* Program new power ramp-up time
 	 * (0 for most boards since we don't lower voltage when in deep sleep)
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 524977a31a49..da5685013e2c 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -155,15 +155,11 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_mpu_timer1_irq = {
-	.name		= "mpu_timer1",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap_mpu_timer1_interrupt,
-};
-
 static __init void omap_init_mpu_timer(unsigned long rate)
 {
-	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
+	if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL))
+		pr_err("request_irq() on %s failed\n", "mpu_timer1");
 	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
 
 	clockevent_mpu_timer1.cpumask = cpumask_of(0);
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 0ae6c52a7d70..e6bf8b48b7bb 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -148,15 +148,11 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_32k_timer_irq = {
-	.name		= "32KHz timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap_32k_timer_interrupt,
-};
-
 static __init void omap_init_32k_timer(void)
 {
-	setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
+	if (request_irq(INT_OS_TIMER, omap_32k_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "32KHz timer", NULL))
+		pr_err("request_irq() on %s failed\n", "32KHz timer");
 
 	clockevent_32k_timer.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&clockevent_32k_timer,
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 0d0a731cb476..e60f1fdc4a60 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -91,12 +91,6 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap2_gp_timer_irq = {
-	.name		= "gp_timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap2_gp_timer_interrupt,
-};
-
 static int omap2_gp_timer_set_next_event(unsigned long cycles,
 					 struct clock_event_device *evt)
 {
@@ -382,8 +376,9 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 				     &clockevent_gpt.name, OMAP_TIMER_POSTED);
 	BUG_ON(res);
 
-	omap2_gp_timer_irq.dev_id = &clkev;
-	setup_irq(clkev.irq, &omap2_gp_timer_irq);
+	if (request_irq(clkev.irq, omap2_gp_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "gp_timer", &clkev))
+		pr_err("request_irq() on %s failed\n", "gp_timer");
 
 	__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
 
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index 1d750152b160..14460c84aca4 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -85,11 +85,6 @@ ioc_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ioc_timer_irq = {
-	.name		= "timer",
-	.handler	= ioc_timer_interrupt
-};
-
 /*
  * Set up timer interrupt.
  */
@@ -97,5 +92,6 @@ void __init ioc_timer_init(void)
 {
 	WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ));
 	ioctime_init();
-	setup_irq(IRQ_TIMER0, &ioc_timer_irq);
+	if (request_irq(IRQ_TIMER0, ioc_timer_interrupt, 0, "timer", NULL))
+		pr_err("request_irq() on %s failed\n", "timer");
 }
diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
index 289e036c9c30..92b2850eeb4f 100644
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -181,12 +181,6 @@ static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction spear_timer_irq = {
-	.name = "timer",
-	.flags = IRQF_TIMER,
-	.handler = spear_timer_interrupt
-};
-
 static void __init spear_clockevent_init(int irq)
 {
 	u32 tick_rate;
@@ -201,7 +195,8 @@ static void __init spear_clockevent_init(int irq)
 
 	clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0);
 
-	setup_irq(irq, &spear_timer_irq);
+	if (request_irq(irq, spear_timer_interrupt, IRQF_TIMER, "timer", NULL))
+		pr_err("request_irq() on %s failed\n", "timer");
 }
 
 static const struct of_device_id timer_of_match[] __initconst = {
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index ffb93db68e9c..877ded7c8b28 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -177,12 +177,6 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction orion_timer_irq = {
-	.name		= "orion_tick",
-	.flags		= IRQF_TIMER,
-	.handler	= orion_timer_interrupt
-};
-
 void __init
 orion_time_set_base(void __iomem *_timer_base)
 {
@@ -236,7 +230,9 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
 	/*
 	 * Setup clockevent timer (interrupt-driven).
 	 */
-	setup_irq(irq, &orion_timer_irq);
+	if (request_irq(irq, orion_timer_interrupt, IRQF_TIMER, "orion_tick",
+			NULL))
+		pr_err("request_irq() on %s failed\n", "orion_tick");
 	orion_clkevt.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe);
 }
-- 
2.24.1

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 02/18] ARM: replace setup_irq() by request_irq()
  2020-02-12  8:02 ` [PATCH 02/18] ARM: replace setup_irq() by request_irq() afzal mohammed
@ 2020-02-12  8:10   ` Viresh Kumar
  2020-02-12 23:27   ` Alexander Sverdlin
  1 sibling, 0 replies; 11+ messages in thread
From: Viresh Kumar @ 2020-02-12  8:10 UTC (permalink / raw)
  To: afzal mohammed
  Cc: linux-arm-kernel, linux-kernel, linux-omap, Krzysztof Halasa,
	Russell King, Hartley Sweeten, Alexander Sverdlin,
	Lubomir Rintel, Kevin Hilman, Aaro Koskinen, Tony Lindgren,
	Viresh Kumar, Shiraz Hashim, Jason Cooper, Andrew Lunn,
	Sebastian Hesselbarth, Gregory Clement, Allison Randal,
	Greg Kroah-Hartman, Thomas

On 12-02-20, 13:32, afzal mohammed wrote:
> request_irq() is preferred over setup_irq(). Existing callers of
> setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
> memory allocators are ready by 'mm_init()'.
> 
> Per tglx[1], setup_irq() existed in olden days when allocators were not
> ready by the time early interrupts were initialized.
> 
> Hence replace setup_irq() by request_irq().
> 
> Seldom remove_irq() usage has been observed coupled with setup_irq(),
> wherever that has been found, it too has been replaced by free_irq().
> 
> [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
> 
> Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
> ---
>  arch/arm/mach-spear/time.c               |  9 ++-------
>
> diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
> index 289e036c9c30..92b2850eeb4f 100644
> --- a/arch/arm/mach-spear/time.c
> +++ b/arch/arm/mach-spear/time.c
> @@ -181,12 +181,6 @@ static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
>  	return IRQ_HANDLED;
>  }
>  
> -static struct irqaction spear_timer_irq = {
> -	.name = "timer",
> -	.flags = IRQF_TIMER,
> -	.handler = spear_timer_interrupt
> -};
> -
>  static void __init spear_clockevent_init(int irq)
>  {
>  	u32 tick_rate;
> @@ -201,7 +195,8 @@ static void __init spear_clockevent_init(int irq)
>  
>  	clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0);
>  
> -	setup_irq(irq, &spear_timer_irq);
> +	if (request_irq(irq, spear_timer_interrupt, IRQF_TIMER, "timer", NULL))
> +		pr_err("request_irq() on %s failed\n", "timer");
>  }

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 02/18] ARM: replace setup_irq() by request_irq()
  2020-02-12  8:02 ` [PATCH 02/18] ARM: replace setup_irq() by request_irq() afzal mohammed
  2020-02-12  8:10   ` Viresh Kumar
@ 2020-02-12 23:27   ` Alexander Sverdlin
  1 sibling, 0 replies; 11+ messages in thread
From: Alexander Sverdlin @ 2020-02-12 23:27 UTC (permalink / raw)
  To: afzal mohammed
  Cc: linux-arm-kernel, linux-kernel, linux-omap, Krzysztof Halasa,
	Russell King, Hartley Sweeten, Lubomir Rintel, Kevin Hilman,
	Aaro Koskinen, Tony Lindgren, Viresh Kumar, Shiraz Hashim,
	Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Gregory Clement, Allison Randal, Greg Kroah-Hartman,
	Thomas Gleixner, Arnd Bergmann

Hi!

On Wed, 12 Feb 2020 13:32:43 +0530
afzal mohammed <afzal.mohd.ma@gmail.com> wrote:

> request_irq() is preferred over setup_irq(). Existing callers of
> setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
> memory allocators are ready by 'mm_init()'.
> 
> Per tglx[1], setup_irq() existed in olden days when allocators were not
> ready by the time early interrupts were initialized.
> 
> Hence replace setup_irq() by request_irq().
> 
> Seldom remove_irq() usage has been observed coupled with setup_irq(),
> wherever that has been found, it too has been replaced by free_irq().
> 
> [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
> 
> Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>

For the EP93xx part:
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>

> diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
> index de998830f534..0335f3b93340 100644
> --- a/arch/arm/mach-ep93xx/timer-ep93xx.c
> +++ b/arch/arm/mach-ep93xx/timer-ep93xx.c
> @@ -117,13 +117,6 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
>  	return IRQ_HANDLED;
>  }
>  
> -static struct irqaction ep93xx_timer_irq = {
> -	.name		= "ep93xx timer",
> -	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
> -	.handler	= ep93xx_timer_interrupt,
> -	.dev_id		= &ep93xx_clockevent,
> -};
> -
>  void __init ep93xx_timer_init(void)
>  {
>  	/* Enable and register clocksource and sched_clock on timer 4 */
> @@ -136,7 +129,10 @@ void __init ep93xx_timer_init(void)
>  			     EP93XX_TIMER4_RATE);
>  
>  	/* Set up clockevent on timer 3 */
> -	setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
> +	if (request_irq(IRQ_EP93XX_TIMER3, ep93xx_timer_interrupt,
> +			IRQF_TIMER | IRQF_IRQPOLL, "ep93xx timer",
> +			&ep93xx_clockevent))
> +		pr_err("request_irq() on %s failed\n", "ep93xx timer");
>  	clockevents_config_and_register(&ep93xx_clockevent,
>  					EP93XX_TIMER123_RATE,
>  					1,

-- 
Alexander Sverdlin.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 00/18] genirq: Remove setup_irq()
  2020-02-12  8:01 [PATCH 00/18] genirq: Remove setup_irq() afzal mohammed
  2020-02-12  8:02 ` [PATCH 02/18] ARM: replace setup_irq() by request_irq() afzal mohammed
@ 2020-02-27 10:31 ` Thomas Gleixner
  2020-02-27 11:07   ` afzal mohammed
  1 sibling, 1 reply; 11+ messages in thread
From: Thomas Gleixner @ 2020-02-27 10:31 UTC (permalink / raw)
  To: afzal mohammed, linux-kernel, linux-rpi-kernel, linux-arm-kernel,
	linux-samsung-soc, x86, linux-sh, linux-s390, linuxppc-dev,
	linux-parisc, linux-mips, linux-m68k, linux-ia64, linux-hexagon,
	linux-c6x-dev, linux-omap, linux-alpha
  Cc: Julia Lawall, Gilles Muller, Nicolas Palix, Michal Marek

Afzal,

afzal mohammed <afzal.mohd.ma@gmail.com> writes:

> While trying to understand internals of irq handling, came across a
> thread [1] in which tglx was referring to avoid usage of setup_irq().
> Existing callers of setup_irq() reached mostly via 'init_IRQ()' &
> 'time_init()', while memory allocators are ready by 'mm_init()'.
>
> Hence instances of setup_irq() is replaced by request_irq() &
> setup_irq() (along with remove_irq()) definition deleted in the last
> patch.
>
> Seldom remove_irq() usage has been observed coupled with setup_irq(),
> wherever that has been found, it too has been replaced by free_irq().

thanks a lot for tackling this!

Vs. merging this series, I suggest the following approach:

   - Resubmit the individual changes as single patches or small series
     to the relevant maintainers and subsystem mailing lists. They have
     no dependency on a core change and can be applied where they belong
     to.

   - After 5.6-rc6, verify which parts have made their way into
     linux-next and resubmit the ignored ones as a series to me along
     with the removal of the core parts.

That way we can avoid conflicting changes between subsystems and the tip
irq/core branch as much as possible.

Thanks,

        tglx

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 00/18] genirq: Remove setup_irq()
  2020-02-27 10:31 ` [PATCH 00/18] genirq: Remove setup_irq() Thomas Gleixner
@ 2020-02-27 11:07   ` afzal mohammed
  2020-03-21 17:43     ` afzal mohammed
  0 siblings, 1 reply; 11+ messages in thread
From: afzal mohammed @ 2020-02-27 11:07 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: linux-kernel, linux-rpi-kernel, linux-arm-kernel,
	linux-samsung-soc, x86, linux-sh, linux-s390, linuxppc-dev,
	linux-parisc, linux-mips, linux-m68k, linux-ia64, linux-hexagon,
	linux-c6x-dev, linux-omap, linux-alpha, Julia Lawall,
	Gilles Muller, Nicolas Palix, Michal Marek

Hi Thomas,

On Thu, Feb 27, 2020 at 11:31:15AM +0100, Thomas Gleixner wrote:

> Vs. merging this series, I suggest the following approach:
> 
>    - Resubmit the individual changes as single patches or small series
>      to the relevant maintainers and subsystem mailing lists. They have
>      no dependency on a core change and can be applied where they belong
>      to.
> 
>    - After 5.6-rc6, verify which parts have made their way into
>      linux-next and resubmit the ignored ones as a series to me along
>      with the removal of the core parts.
> 
> That way we can avoid conflicting changes between subsystems and the tip
> irq/core branch as much as possible.

Okay, i will do accordingly.

[ your mail crossed my v3 (only one patch) posting ]

Regards
afzal

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 00/18] genirq: Remove setup_irq()
  2020-02-27 11:07   ` afzal mohammed
@ 2020-03-21 17:43     ` afzal mohammed
  2020-03-27 16:08       ` [PATCH 0/6] Kill setup_irq() afzal mohammed
  0 siblings, 1 reply; 11+ messages in thread
From: afzal mohammed @ 2020-03-21 17:43 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: linux-kernel, linux-rpi-kernel, linux-arm-kernel,
	linux-samsung-soc, x86, linux-sh, linux-s390, linuxppc-dev,
	linux-parisc, linux-mips, linux-m68k, linux-ia64, linux-hexagon,
	linux-c6x-dev, linux-omap, linux-alpha, Julia Lawall,
	Gilles Muller, Nicolas Palix, Michal Marek

Hi Thomas,

On Thu, Feb 27, 2020 at 04:37:13PM +0530, afzal mohammed wrote:
> On Thu, Feb 27, 2020 at 11:31:15AM +0100, Thomas Gleixner wrote:

> > Vs. merging this series, I suggest the following approach:
> > 
> >    - Resubmit the individual changes as single patches or small series
> >      to the relevant maintainers and subsystem mailing lists. They have
> >      no dependency on a core change and can be applied where they belong
> >      to.
> > 
> >    - After 5.6-rc6, verify which parts have made their way into
> >      linux-next and resubmit the ignored ones as a series to me along
> >      with the removal of the core parts.
> > 
> > That way we can avoid conflicting changes between subsystems and the tip
> > irq/core branch as much as possible.
> 
> Okay, i will do accordingly.

i am on it, is delayed due to the reason as mentioned at,

https://lkml.kernel.org/r/20200321172626.GA6323@afzalpc

[ not repeating contents here since other mail was sent just now,
  cc'ing you ]

Regards
afzal


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 0/6] Kill setup_irq()
  2020-03-21 17:43     ` afzal mohammed
@ 2020-03-27 16:08       ` afzal mohammed
  2020-03-28  2:48         ` Brian Cain
  0 siblings, 1 reply; 11+ messages in thread
From: afzal mohammed @ 2020-03-27 16:08 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: linux-kernel, linux-arm-kernel, linux-samsung-soc, x86, linux-sh,
	linux-s390, linuxppc-dev, linux-parisc, linux-mips, linux-m68k,
	linux-ia64, linux-hexagon, linux-c6x-dev, linux-omap,
	linux-alpha

Hi Thomas,

As compared to the situation mentioned earlier[1], now powerpc patch is
also in -next, and the pending ARM patches has been picked up by ARM SoC
maintainers today and is expected to show up in next -next. All other
subsytem patches has been picked by relevant maintainers & are already
in -next except alpha, c6x, hexagon, unicore32 & sh.

As it is the case, i am sending you patches for the above 5
architecture's plus the core removal patch.

Status of 5 arch's:
-------------------
alpha:		received ack from Matt Turner, build test success
c6x:		did receive ack from Mark Salter in v1, the final
		 version (v3) was with minor changes, hence removed his
		 ack & cc'ed him, build test success
hexagon:	build test success
unicore32:	couldn't get toolchain from kernel.org, 0day test robot
		 or Segher's buildall
sh:		To compile the relevant changes sh64 compiler is
		 required, couldn't get it from above mentioned 3
		 sources.

Note 1: sh toolchain is available, but that will not make the
 relevant changes compile as it has dependency of 64bit arch toolchain,
 did try a Kconfig hack to make it compile w/ 32bit sh toolchain, but it
 failed due to other reasons (unknown operands), so gave up on that.
Note 2: hexagon final image creation fails even w/o my patch, but it
 has been ensured that w/ my changes relevant object files are getting
 built  w/o warnings.

Regards
afzal

[1] https://lkml.kernel.org/r/20200321172626.GA6323@afzalpc

afzal mohammed (6):
  alpha: Replace setup_irq() by request_irq()
  c6x: replace setup_irq() by request_irq()
  hexagon: replace setup_irq() by request_irq()
  sh: replace setup_irq() by request_irq()
  unicore32: replace setup_irq() by request_irq()
  genirq: Remove setup_irq() and remove_irq()

 arch/alpha/kernel/irq_alpha.c     | 29 ++++----------------
 arch/alpha/kernel/irq_i8259.c     |  8 ++----
 arch/alpha/kernel/irq_impl.h      |  7 +----
 arch/alpha/kernel/irq_pyxis.c     |  3 ++-
 arch/alpha/kernel/sys_alcor.c     |  3 ++-
 arch/alpha/kernel/sys_cabriolet.c |  3 ++-
 arch/alpha/kernel/sys_eb64p.c     |  3 ++-
 arch/alpha/kernel/sys_marvel.c    |  2 +-
 arch/alpha/kernel/sys_miata.c     |  6 +++--
 arch/alpha/kernel/sys_ruffian.c   |  3 ++-
 arch/alpha/kernel/sys_rx164.c     |  3 ++-
 arch/alpha/kernel/sys_sx164.c     |  3 ++-
 arch/alpha/kernel/sys_wildfire.c  |  7 ++---
 arch/alpha/kernel/time.c          |  6 ++---
 arch/c6x/platforms/timer64.c      | 11 +++-----
 arch/hexagon/kernel/smp.c         | 22 ++++++++--------
 arch/hexagon/kernel/time.c        | 11 +++-----
 arch/sh/boards/mach-cayman/irq.c  | 18 +++++--------
 arch/sh/drivers/dma/dma-pvr2.c    |  9 +++----
 arch/unicore32/kernel/time.c      | 11 +++-----
 include/linux/irq.h               |  2 --
 kernel/irq/manage.c               | 44 -------------------------------
 22 files changed, 60 insertions(+), 154 deletions(-)

-- 
2.25.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* RE: [PATCH 0/6] Kill setup_irq()
  2020-03-27 16:08       ` [PATCH 0/6] Kill setup_irq() afzal mohammed
@ 2020-03-28  2:48         ` Brian Cain
  2020-03-28  7:32           ` afzal mohammed
  0 siblings, 1 reply; 11+ messages in thread
From: Brian Cain @ 2020-03-28  2:48 UTC (permalink / raw)
  To: 'afzal mohammed', 'Thomas Gleixner'
  Cc: linux-kernel, linux-arm-kernel, linux-samsung-soc, x86, linux-sh,
	linux-s390, linuxppc-dev, linux-parisc, linux-mips, linux-m68k,
	linux-ia64, linux-hexagon, linux-c6x-dev, linux-omap,
	linux-alpha

> -----Original Message-----
> From: linux-hexagon-owner@vger.kernel.org <linux-hexagon-
> owner@vger.kernel.org> On Behalf Of afzal mohammed
> Sent: Friday, March 27, 2020 11:08 AM
> To: Thomas Gleixner <tglx@linutronix.de>
> Cc: linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-samsung-soc@vger.kernel.org; x86@kernel.org; linux-
> sh@vger.kernel.org; linux-s390@vger.kernel.org; linuxppc-
> dev@lists.ozlabs.org; linux-parisc@vger.kernel.org; linux-
> mips@vger.kernel.org; linux-m68k@lists.linux-m68k.org; linux-
> ia64@vger.kernel.org; linux-hexagon@vger.kernel.org; linux-c6x-dev@linux-
> c6x.org; linux-omap@vger.kernel.org; linux-alpha@vger.kernel.org
> Subject: [PATCH 0/6] Kill setup_irq()
...
> Note 1: sh toolchain is available, but that will not make the  relevant
changes
> compile as it has dependency of 64bit arch toolchain,  did try a Kconfig
hack
> to make it compile w/ 32bit sh toolchain, but it  failed due to other
reasons
> (unknown operands), so gave up on that.
> Note 2: hexagon final image creation fails even w/o my patch, but it  has
> been ensured that w/ my changes relevant object files are getting  built
w/o
> warnings.

Afzal,

	What's the nature of the failure in "Note 2"?

-Brian

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 0/6] Kill setup_irq()
  2020-03-28  2:48         ` Brian Cain
@ 2020-03-28  7:32           ` afzal mohammed
  2020-04-02 15:03             ` Brian Cain
  0 siblings, 1 reply; 11+ messages in thread
From: afzal mohammed @ 2020-03-28  7:32 UTC (permalink / raw)
  To: Brian Cain
  Cc: 'Thomas Gleixner',
	linux-kernel, linux-arm-kernel, linux-samsung-soc, x86, linux-sh,
	linux-s390, linuxppc-dev, linux-parisc, linux-mips, linux-m68k,
	linux-ia64, linux-hexagon, linux-c6x-dev, linux-omap,
	linux-alpha

Hi Brian,

On Fri, Mar 27, 2020 at 09:48:38PM -0500, Brian Cain wrote:

> > Note 2: hexagon final image creation fails even w/o my patch

> 	What's the nature of the failure in "Note 2"?

drivers/base/firmware_loader/main.o: In function `fw_is_builtin_firmware':
/devel/src/kernel6/drivers/base/firmware_loader/main.c:132:(.text+0xc8): relocation truncated to fit: R_HEX_16_X against symbol `__start_builtin_fw' defined in .modinfo section in .tmp_vmlinux1
Makefile:1077: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1

[ i had deleted the toolchain earlier, since you asked, download again &
checked ]

Regards
afzal

^ permalink raw reply	[flat|nested] 11+ messages in thread

* RE: [PATCH 0/6] Kill setup_irq()
  2020-03-28  7:32           ` afzal mohammed
@ 2020-04-02 15:03             ` Brian Cain
  0 siblings, 0 replies; 11+ messages in thread
From: Brian Cain @ 2020-04-02 15:03 UTC (permalink / raw)
  To: 'afzal mohammed'
  Cc: 'Thomas Gleixner',
	linux-kernel, linux-arm-kernel, linux-samsung-soc, x86, linux-sh,
	linux-s390, linuxppc-dev, linux-parisc, linux-mips, linux-m68k,
	linux-ia64, linux-hexagon, linux-c6x-dev, linux-omap,
	linux-alpha

> -----Original Message-----
> From: linux-hexagon-owner@vger.kernel.org <linux-hexagon-
> owner@vger.kernel.org> On Behalf Of afzal mohammed
...
> On Fri, Mar 27, 2020 at 09:48:38PM -0500, Brian Cain wrote:
> 
> > > Note 2: hexagon final image creation fails even w/o my patch
> 
> > 	What's the nature of the failure in "Note 2"?
> 
> drivers/base/firmware_loader/main.o: In function `fw_is_builtin_firmware':
> /devel/src/kernel6/drivers/base/firmware_loader/main.c:132:(.text+0xc8):
> relocation truncated to fit: R_HEX_16_X against symbol
`__start_builtin_fw'
> defined in .modinfo section in .tmp_vmlinux1
> Makefile:1077: recipe for target 'vmlinux' failed
> make: *** [vmlinux] Error 1

Thanks for reporting it -- I will make a patch to fix it.

-Brian

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-12  8:01 [PATCH 00/18] genirq: Remove setup_irq() afzal mohammed
2020-02-12  8:02 ` [PATCH 02/18] ARM: replace setup_irq() by request_irq() afzal mohammed
2020-02-12  8:10   ` Viresh Kumar
2020-02-12 23:27   ` Alexander Sverdlin
2020-02-27 10:31 ` [PATCH 00/18] genirq: Remove setup_irq() Thomas Gleixner
2020-02-27 11:07   ` afzal mohammed
2020-03-21 17:43     ` afzal mohammed
2020-03-27 16:08       ` [PATCH 0/6] Kill setup_irq() afzal mohammed
2020-03-28  2:48         ` Brian Cain
2020-03-28  7:32           ` afzal mohammed
2020-04-02 15:03             ` Brian Cain

Linux-OMAP Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-omap/0 linux-omap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-omap linux-omap/ https://lore.kernel.org/linux-omap \
		linux-omap@vger.kernel.org
	public-inbox-index linux-omap

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-omap


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git