* [PATCH 01/15] clocksource/drivers/timer-ti-32k: Add support for initializing directly
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
@ 2020-04-29 21:53 ` Tony Lindgren
2020-04-29 21:53 ` [PATCH 02/15] dt-bindings: timer: add ti,dmtimer compatible for for system timers Tony Lindgren
` (13 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:53 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, Keerthy,
Lokesh Vutla, Tero Kristo, H. Nikolaus Schaller, Aaro Koskinen,
Adam Ford, Andreas Kemnade, Brian Hutchinson, Graeme Smecher,
Michael Turquette, Stephen Boyd, devicetree, linux-clk
Let's allow probing the 32k counter directly based on devicetree data to
prepare for dropping the related legacy platform code. Let's only do this
if the parent node is compatible with ti-sysc to make sure we have the
related devicetree data available.
Let's also show the 32k counter information before registering the
clocksource, now we see it after the clocksource information which is a
bit confusing.
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/clocksource/timer-ti-32k.c | 48 +++++++++++++++++++++++++++++-
1 file changed, 47 insertions(+), 1 deletion(-)
diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c
--- a/drivers/clocksource/timer-ti-32k.c
+++ b/drivers/clocksource/timer-ti-32k.c
@@ -24,6 +24,7 @@
* Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
*/
+#include <linux/clk.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/sched_clock.h>
@@ -76,6 +77,49 @@ static u64 notrace omap_32k_read_sched_clock(void)
return ti_32k_read_cycles(&ti_32k_timer.cs);
}
+static void __init ti_32k_timer_enable_clock(struct device_node *np,
+ const char *name)
+{
+ struct clk *clock;
+ int error;
+
+ clock = of_clk_get_by_name(np->parent, name);
+ if (IS_ERR(clock)) {
+ /* Only some SoCs have a separate interface clock */
+ if (PTR_ERR(clock) == -EINVAL && !strncmp("ick", name, 3))
+ return;
+
+ pr_warn("%s: could not get clock %s %li\n",
+ __func__, name, PTR_ERR(clock));
+ return;
+ }
+
+ error = clk_prepare_enable(clock);
+ if (error) {
+ pr_warn("%s: could not enable %s: %i\n",
+ __func__, name, error);
+ return;
+ }
+}
+
+static void __init ti_32k_timer_module_init(struct device_node *np,
+ void __iomem *base)
+{
+ void __iomem *sysc = base + 4;
+
+ if (!of_device_is_compatible(np->parent, "ti,sysc"))
+ return;
+
+ ti_32k_timer_enable_clock(np, "fck");
+ ti_32k_timer_enable_clock(np, "ick");
+
+ /*
+ * Force idle module as wkup domain is active with MPU.
+ * No need to tag the module disabled for ti-sysc probe.
+ */
+ writel_relaxed(0, sysc);
+}
+
static int __init ti_32k_timer_init(struct device_node *np)
{
int ret;
@@ -90,6 +134,7 @@ static int __init ti_32k_timer_init(struct device_node *np)
ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
ti_32k_timer.counter = ti_32k_timer.base;
+ ti_32k_timer_module_init(np, ti_32k_timer.base);
/*
* 32k sync Counter IP register offsets vary between the highlander
@@ -104,6 +149,8 @@ static int __init ti_32k_timer_init(struct device_node *np)
else
ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW;
+ pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+
ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
if (ret) {
pr_err("32k_counter: can't register clocksource\n");
@@ -111,7 +158,6 @@ static int __init ti_32k_timer_init(struct device_node *np)
}
sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
- pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
return 0;
}
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 02/15] dt-bindings: timer: add ti,dmtimer compatible for for system timers
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
2020-04-29 21:53 ` [PATCH 01/15] clocksource/drivers/timer-ti-32k: Add support for initializing directly Tony Lindgren
@ 2020-04-29 21:53 ` Tony Lindgren
2020-05-12 14:52 ` [PATCH 02/15] dt-bindings: timer: add ti, dmtimer " Rob Herring
2020-04-29 21:53 ` [PATCH 03/15] clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support Tony Lindgren
` (12 subsequent siblings)
14 siblings, 1 reply; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:53 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, H. Nikolaus Schaller,
Aaro Koskinen, Adam Ford, Andreas Kemnade, Brian Hutchinson,
Graeme Smecher, Keerthy, Lokesh Vutla, Michael Turquette,
Stephen Boyd, Tero Kristo, devicetree, linux-clk
The TI dual-mode timer can be used for both clocksource and clockevent
system timers. We need a way to specify which dual-mode timers are
reserved for system timers as there are multiple instances available
that may require a board specific configuration.
Let's add a generic compatible "ti,dmtimer" that TIMER_OF_DECLARE can
use as suggested by Daniel Lezcano <daniel.lezcano@linaro.org>.
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
Documentation/devicetree/bindings/timer/ti,timer.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/timer/ti,timer.txt b/Documentation/devicetree/bindings/timer/ti,timer.txt
--- a/Documentation/devicetree/bindings/timer/ti,timer.txt
+++ b/Documentation/devicetree/bindings/timer/ti,timer.txt
@@ -14,6 +14,7 @@ Required properties:
ti,omap5430-timer (applicable to OMAP543x devices)
ti,am335x-timer (applicable to AM335x devices)
ti,am335x-timer-1ms (applicable to AM335x devices)
+ ti,dmtimer (applicable to system timers)
- reg: Contains timer register address range (base address and
length).
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH 02/15] dt-bindings: timer: add ti, dmtimer compatible for for system timers
2020-04-29 21:53 ` [PATCH 02/15] dt-bindings: timer: add ti,dmtimer compatible for for system timers Tony Lindgren
@ 2020-05-12 14:52 ` Rob Herring
2020-05-12 14:56 ` Tony Lindgren
0 siblings, 1 reply; 19+ messages in thread
From: Rob Herring @ 2020-05-12 14:52 UTC (permalink / raw)
To: Tony Lindgren
Cc: Keerthy, Stephen Boyd, Thomas Gleixner, Graeme Smecher,
linux-kernel, Tero Kristo, Aaro Koskinen, devicetree,
Andreas Kemnade, H. Nikolaus Schaller, Adam Ford, Lokesh Vutla,
Daniel Lezcano, Brian Hutchinson, linux-clk, linux-omap,
Michael Turquette, linux-arm-kernel
On Wed, 29 Apr 2020 14:53:49 -0700, Tony Lindgren wrote:
> The TI dual-mode timer can be used for both clocksource and clockevent
> system timers. We need a way to specify which dual-mode timers are
> reserved for system timers as there are multiple instances available
> that may require a board specific configuration.
>
> Let's add a generic compatible "ti,dmtimer" that TIMER_OF_DECLARE can
> use as suggested by Daniel Lezcano <daniel.lezcano@linaro.org>.
>
> Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> Documentation/devicetree/bindings/timer/ti,timer.txt | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 02/15] dt-bindings: timer: add ti, dmtimer compatible for for system timers
2020-05-12 14:52 ` [PATCH 02/15] dt-bindings: timer: add ti, dmtimer " Rob Herring
@ 2020-05-12 14:56 ` Tony Lindgren
0 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-05-12 14:56 UTC (permalink / raw)
To: Rob Herring
Cc: Keerthy, Stephen Boyd, Thomas Gleixner, Graeme Smecher,
linux-kernel, Tero Kristo, Aaro Koskinen, devicetree,
Andreas Kemnade, H. Nikolaus Schaller, Adam Ford, Lokesh Vutla,
Daniel Lezcano, Brian Hutchinson, linux-clk, linux-omap,
Michael Turquette, linux-arm-kernel
* Rob Herring <robh@kernel.org> [200512 14:53]:
> On Wed, 29 Apr 2020 14:53:49 -0700, Tony Lindgren wrote:
> > The TI dual-mode timer can be used for both clocksource and clockevent
> > system timers. We need a way to specify which dual-mode timers are
> > reserved for system timers as there are multiple instances available
> > that may require a board specific configuration.
> >
> > Let's add a generic compatible "ti,dmtimer" that TIMER_OF_DECLARE can
> > use as suggested by Daniel Lezcano <daniel.lezcano@linaro.org>.
> >
> > Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Signed-off-by: Tony Lindgren <tony@atomide.com>
> > ---
> > Documentation/devicetree/bindings/timer/ti,timer.txt | 1 +
> > 1 file changed, 1 insertion(+)
> >
>
> Acked-by: Rob Herring <robh@kernel.org>
Looks like this is no longer needed with v3 set in the repost
thread:
"[PATCHv3 00/14] Update omaps to use drivers/clocksource timers"
It now does detection for the preferred system timers based on
the various timer features like you suggested.
Regards,
Tony
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 03/15] clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
2020-04-29 21:53 ` [PATCH 01/15] clocksource/drivers/timer-ti-32k: Add support for initializing directly Tony Lindgren
2020-04-29 21:53 ` [PATCH 02/15] dt-bindings: timer: add ti,dmtimer compatible for for system timers Tony Lindgren
@ 2020-04-29 21:53 ` Tony Lindgren
2020-04-29 21:53 ` [PATCH 04/15] clk: ti: dm816: enable sysclk6_ck on init Tony Lindgren
` (11 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:53 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, Keerthy,
Lokesh Vutla, Tero Kristo, H. Nikolaus Schaller, Aaro Koskinen,
Adam Ford, Andreas Kemnade, Brian Hutchinson, Graeme Smecher,
Michael Turquette, Stephen Boyd, devicetree, linux-clk
We can move the TI dmtimer clockevent and clocksource to live under
drivers/clocksource if we rely only on the clock framework, and handle
the module configuration directly in the clocksource driver based on the
device tree data.
This removes the early dependency with system timers to the interconnect
related code, and we can probe pretty much everything else later on at
the module_init level.
Let's first add a new driver for timer-ti-dm-systimer based on existing
arch/arm/mach-omap2/timer.c. Then let's start moving SoCs to probe with
device tree data while still keeping the old timer.c. And eventually we
can just drop the old timer.c.
Let's take the opportunity to switch to use readl/writel as pointed out
by Daniel Lezcano <daniel.lezcano@linaro.org>. This allows further
clean-up of the timer-ti-dm code the a lot of the shared helpers can
just become static to the non-syster related code.
Note the boards can optionally configure the timer source clock in using
assigned-clock-parents.
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-ti-dm-systimer.c | 511 +++++++++++++++++++++
2 files changed, 512 insertions(+)
create mode 100644 drivers/clocksource/timer-ti-dm-systimer.c
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DAVINCI_TIMER) += timer-davinci.o
obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o
obj-$(CONFIG_OMAP_DM_TIMER) += timer-ti-dm.o
+obj-$(CONFIG_OMAP_DM_TIMER) += timer-ti-dm-systimer.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
obj-$(CONFIG_FTTMR010_TIMER) += timer-fttmr010.o
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
new file mode 100644
--- /dev/null
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -0,0 +1,511 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#include <linux/clk/clk-conf.h>
+
+#include <clocksource/timer-ti-dm.h>
+#include <dt-bindings/bus/ti-sysc.h>
+
+/* For type1, set SYSC_OMAP2_CLOCKACTIVITY for fck off on idle, l4 clock on */
+#define DMTIMER_TYPE1_ENABLE ((1 << 9) | (SYSC_IDLE_SMART << 3) | \
+ SYSC_OMAP2_ENAWAKEUP | SYSC_OMAP2_AUTOIDLE)
+
+#define DMTIMER_TYPE2_ENABLE (SYSC_IDLE_SMART_WKUP << 2)
+#define DMTIMER_RESET_WAIT 100000
+
+/*
+ * Subset of the timer registers we use. Note that the register offsets
+ * depend on the timer revision detected.
+ */
+struct dmtimer_systimer {
+ void __iomem *base;
+ u8 sysc;
+ u8 irq_stat;
+ u8 irq_ena;
+ u8 pend;
+ u8 load;
+ u8 counter;
+ u8 ctrl;
+ u8 wakeup;
+ u8 ifctrl;
+ unsigned long rate;
+};
+
+struct dmtimer_clockevent {
+ struct clock_event_device dev;
+ struct dmtimer_systimer t;
+ u32 period;
+};
+
+struct dmtimer_clocksource {
+ struct clocksource dev;
+ struct dmtimer_systimer t;
+ unsigned int loadval;
+};
+
+/* Assumes v1 ip if bits [31:16] are zero */
+static bool dmtimer_systimer_revision1(struct dmtimer_systimer *t)
+{
+ u32 tidr = readl_relaxed(t->base);
+
+ return !(tidr >> 16);
+}
+
+static int __init dmtimer_systimer_type1_reset(struct dmtimer_systimer *t)
+{
+ void __iomem *syss = t->base + OMAP_TIMER_V1_SYS_STAT_OFFSET;
+ int ret;
+ u32 l;
+
+ writel_relaxed(BIT(1) | BIT(2), t->base + t->ifctrl);
+ ret = readl_poll_timeout_atomic(syss, l, l & BIT(0), 100,
+ DMTIMER_RESET_WAIT);
+
+ return ret;
+}
+
+/* Note we must use io_base instead of func_base for type2 OCP regs */
+static int __init dmtimer_systimer_type2_reset(struct dmtimer_systimer *t)
+{
+ void __iomem *sysc = t->base + t->sysc;
+ u32 l;
+
+ l = readl_relaxed(sysc);
+ l |= BIT(0);
+ writel_relaxed(l, sysc);
+
+ return readl_poll_timeout_atomic(sysc, l, !(l & BIT(0)), 100,
+ DMTIMER_RESET_WAIT);
+}
+
+static int __init dmtimer_systimer_reset(struct dmtimer_systimer *t)
+{
+ int ret;
+
+ if (dmtimer_systimer_revision1(t))
+ ret = dmtimer_systimer_type1_reset(t);
+ else
+ ret = dmtimer_systimer_type2_reset(t);
+ if (ret < 0) {
+ pr_err("%s failed with %i\n", __func__, ret);
+
+ return ret;
+ }
+
+ return 0;
+}
+
+/* Interface clocks are only available on some SoCs variants */
+static int __init dmtimer_systimer_init_clock(struct device_node *np,
+ const char *name,
+ unsigned long *rate)
+{
+ struct clk *clock;
+ unsigned long r;
+ int error;
+
+ clock = of_clk_get_by_name(np, name);
+ if ((PTR_ERR(clock) == -EINVAL) && !strncmp(name, "ick", 3))
+ return 0;
+ else if (IS_ERR(clock))
+ return PTR_ERR(clock);
+
+ error = clk_prepare_enable(clock);
+ if (error)
+ return error;
+
+ r = clk_get_rate(clock);
+ if (!r)
+ return -ENODEV;
+
+ *rate = r;
+
+ return 0;
+}
+
+static void dmtimer_systimer_enable(struct dmtimer_systimer *t)
+{
+ u32 val;
+
+ if (dmtimer_systimer_revision1(t))
+ val = DMTIMER_TYPE1_ENABLE;
+ else
+ val = DMTIMER_TYPE2_ENABLE;
+
+ writel_relaxed(val, t->base + t->sysc);
+}
+
+static void dmtimer_systimer_disable(struct dmtimer_systimer *t)
+{
+ writel_relaxed(0, t->base + t->sysc);
+}
+
+static int __init dmtimer_systimer_setup(struct device_node *np,
+ struct dmtimer_systimer *t)
+{
+ unsigned long rate;
+ u8 regbase;
+ int error;
+
+ if (!of_device_is_compatible(np->parent, "ti,sysc"))
+ return -EINVAL;
+
+ t->base = of_iomap(np, 0);
+ if (!t->base)
+ return -ENXIO;
+
+ /*
+ * Enable optional assigned-clock-parents configured at the timer
+ * node level. For regular device drivers, this is done automatically
+ * by bus related code such as platform_drv_probe().
+ */
+ error = of_clk_set_defaults(np, false);
+ if (error < 0)
+ pr_err("%s: clock source init failed: %i\n", __func__, error);
+
+ /* For ti-sysc, we have timer clocks at the parent module level */
+ error = dmtimer_systimer_init_clock(np->parent, "fck", &rate);
+ if (error)
+ goto err_unmap;
+
+ t->rate = rate;
+
+ error = dmtimer_systimer_init_clock(np->parent, "ick", &rate);
+ if (error)
+ goto err_unmap;
+
+ if (dmtimer_systimer_revision1(t)) {
+ t->irq_stat = OMAP_TIMER_V1_STAT_OFFSET;
+ t->irq_ena = OMAP_TIMER_V1_INT_EN_OFFSET;
+ t->pend = _OMAP_TIMER_WRITE_PEND_OFFSET;
+ regbase = 0;
+ } else {
+ t->irq_stat = OMAP_TIMER_V2_IRQSTATUS;
+ t->irq_ena = OMAP_TIMER_V2_IRQENABLE_SET;
+ regbase = OMAP_TIMER_V2_FUNC_OFFSET;
+ t->pend = regbase + _OMAP_TIMER_WRITE_PEND_OFFSET;
+ }
+
+ t->sysc = OMAP_TIMER_OCP_CFG_OFFSET;
+ t->load = regbase + _OMAP_TIMER_LOAD_OFFSET;
+ t->counter = regbase + _OMAP_TIMER_COUNTER_OFFSET;
+ t->ctrl = regbase + _OMAP_TIMER_CTRL_OFFSET;
+ t->wakeup = regbase + _OMAP_TIMER_WAKEUP_EN_OFFSET;
+ t->ifctrl = regbase + _OMAP_TIMER_IF_CTRL_OFFSET;
+
+ dmtimer_systimer_enable(t);
+ dmtimer_systimer_reset(t);
+ pr_debug("dmtimer rev %08x sysc %08x\n", readl_relaxed(t->base),
+ readl_relaxed(t->base + t->sysc));
+
+ return 0;
+
+err_unmap:
+ iounmap(t->base);
+
+ return error;
+}
+
+/* Clockevent */
+static struct dmtimer_clockevent *
+to_dmtimer_clockevent(struct clock_event_device *clockevent)
+{
+ return container_of(clockevent, struct dmtimer_clockevent, dev);
+}
+
+static irqreturn_t dmtimer_clockevent_interrupt(int irq, void *data)
+{
+ struct dmtimer_clockevent *clkevt = data;
+ struct dmtimer_systimer *t = &clkevt->t;
+
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_stat);
+ clkevt->dev.event_handler(&clkevt->dev);
+
+ return IRQ_HANDLED;
+}
+
+static int dmtimer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+ struct dmtimer_systimer *t = &clkevt->t;
+ void __iomem *pend = t->base + t->pend;
+
+ writel_relaxed(0xffffffff - cycles, t->base + t->counter);
+ while (readl_relaxed(pend) & WP_TCRR)
+ cpu_relax();
+
+ writel_relaxed(OMAP_TIMER_CTRL_ST, t->base + t->ctrl);
+ while (readl_relaxed(pend) & WP_TCLR)
+ cpu_relax();
+
+ return 0;
+}
+
+static int dmtimer_clockevent_shutdown(struct clock_event_device *evt)
+{
+ struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+ struct dmtimer_systimer *t = &clkevt->t;
+ void __iomem *ctrl = t->base + t->ctrl;
+ u32 l;
+
+ l = readl_relaxed(ctrl);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ l &= ~BIT(0);
+ writel_relaxed(l, ctrl);
+ /* Flush posted write */
+ l = readl_relaxed(ctrl);
+ /* Wait for functional clock period x 3.5 */
+ udelay(3500000 / t->rate + 1);
+ }
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_stat);
+
+ return 0;
+}
+
+static int dmtimer_set_periodic(struct clock_event_device *evt)
+{
+ struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+ struct dmtimer_systimer *t = &clkevt->t;
+ void __iomem *pend = t->base + t->pend;
+
+ dmtimer_clockevent_shutdown(evt);
+
+ /* Looks like we need to first set the load value separately */
+ writel_relaxed(clkevt->period, t->base + t->load);
+ while (readl_relaxed(pend) & WP_TLDR)
+ cpu_relax();
+
+ writel_relaxed(clkevt->period, t->base + t->counter);
+ while (readl_relaxed(pend) & WP_TCRR)
+ cpu_relax();
+
+ writel_relaxed(OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
+ t->base + t->ctrl);
+ while (readl_relaxed(pend) & WP_TCLR)
+ cpu_relax();
+
+ return 0;
+}
+
+static void omap_clockevent_idle(struct clock_event_device *evt)
+{
+ struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+ struct dmtimer_systimer *t = &clkevt->t;
+
+ dmtimer_systimer_disable(t);
+}
+
+static void omap_clockevent_unidle(struct clock_event_device *evt)
+{
+ struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+ struct dmtimer_systimer *t = &clkevt->t;
+
+ dmtimer_systimer_enable(t);
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_ena);
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->wakeup);
+}
+
+static int __init dmtimer_clockevent_init(struct device_node *np)
+{
+ struct dmtimer_clockevent *clkevt;
+ struct clock_event_device *dev;
+ struct dmtimer_systimer *t;
+ int error;
+ u32 pa;
+
+ clkevt = kzalloc(sizeof(*clkevt), GFP_KERNEL);
+ if (!clkevt)
+ return -ENOMEM;
+
+ t = &clkevt->t;
+ dev = &clkevt->dev;
+
+ /*
+ * We mostly use cpuidle_coupled with ARM local timers for runtime,
+ * so there's probably no use for CLOCK_EVT_FEAT_DYNIRQ here.
+ */
+ dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ dev->rating = 300;
+ dev->set_next_event = dmtimer_set_next_event;
+ dev->set_state_shutdown = dmtimer_clockevent_shutdown;
+ dev->set_state_periodic = dmtimer_set_periodic;
+ dev->set_state_oneshot = dmtimer_clockevent_shutdown;
+ dev->tick_resume = dmtimer_clockevent_shutdown;
+ dev->cpumask = cpu_possible_mask;
+
+ dev->irq = irq_of_parse_and_map(np, 0);
+ if (!dev->irq) {
+ error = -ENXIO;
+ goto err_out_free;
+ }
+
+ error = dmtimer_systimer_setup(np, &clkevt->t);
+ if (error)
+ goto err_out_free;
+
+ clkevt->period = 0xffffffff - DIV_ROUND_CLOSEST(t->rate, HZ);
+
+ /*
+ * For clock-event timers we never read the timer counter and
+ * so we are not impacted by errata i103 and i767. Therefore,
+ * we can safely ignore this errata for clock-event timers.
+ */
+ writel_relaxed(OMAP_TIMER_CTRL_POSTED, t->base + t->ifctrl);
+
+ error = request_irq(dev->irq, dmtimer_clockevent_interrupt,
+ IRQF_TIMER, "clockevent", clkevt);
+ if (error)
+ goto err_out_unmap;
+
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_ena);
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->wakeup);
+
+ pa = of_translate_address(np, of_get_address(np, 0, NULL, NULL));
+ pr_info("TI gptimer clockevent: %s%lu Hz at %pOF\n",
+ of_find_property(np, "ti,timer-alwon", NULL) ?
+ "always-on " : "", t->rate, np->parent);
+
+ clockevents_config_and_register(dev, t->rate,
+ 3, /* Timer internal resynch latency */
+ 0xffffffff);
+
+ if (of_device_is_compatible(np, "ti,am33xx") ||
+ of_device_is_compatible(np, "ti,am43")) {
+ dev->suspend = omap_clockevent_idle;
+ dev->resume = omap_clockevent_unidle;
+ }
+
+ return 0;
+
+err_out_unmap:
+ iounmap(t->base);
+
+err_out_free:
+ kfree(clkevt);
+
+ return error;
+}
+
+/* Clocksource */
+static struct dmtimer_clocksource *
+to_dmtimer_clocksource(struct clocksource *cs)
+{
+ return container_of(cs, struct dmtimer_clocksource, dev);
+}
+
+static u64 dmtimer_clocksource_read_cycles(struct clocksource *cs)
+{
+ struct dmtimer_clocksource *clksrc = to_dmtimer_clocksource(cs);
+ struct dmtimer_systimer *t = &clksrc->t;
+
+ return (u64)readl_relaxed(t->base + t->counter);
+}
+
+static void __iomem *dmtimer_sched_clock_counter;
+
+static u64 notrace dmtimer_read_sched_clock(void)
+{
+ return readl_relaxed(dmtimer_sched_clock_counter);
+}
+
+static void dmtimer_clocksource_suspend(struct clocksource *cs)
+{
+ struct dmtimer_clocksource *clksrc = to_dmtimer_clocksource(cs);
+ struct dmtimer_systimer *t = &clksrc->t;
+
+ clksrc->loadval = readl_relaxed(t->base + t->counter);
+ dmtimer_systimer_disable(t);
+}
+
+static void dmtimer_clocksource_resume(struct clocksource *cs)
+{
+ struct dmtimer_clocksource *clksrc = to_dmtimer_clocksource(cs);
+ struct dmtimer_systimer *t = &clksrc->t;
+
+ dmtimer_systimer_enable(t);
+ writel_relaxed(clksrc->loadval, t->base + t->counter);
+ writel_relaxed(OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR,
+ t->base + t->ctrl);
+}
+
+static int __init dmtimer_clocksource_init(struct device_node *np)
+{
+ struct dmtimer_clocksource *clksrc;
+ struct dmtimer_systimer *t;
+ struct clocksource *dev;
+ int error;
+ u32 pa;
+
+ clksrc = kzalloc(sizeof(*clksrc), GFP_KERNEL);
+ if (!clksrc)
+ return -ENOMEM;
+
+ dev = &clksrc->dev;
+ t = &clksrc->t;
+
+ error = dmtimer_systimer_setup(np, t);
+ if (error)
+ goto err_out_free;
+
+ dev->name = "dmtimer";
+ dev->rating = 300;
+ dev->read = dmtimer_clocksource_read_cycles;
+ dev->mask = CLOCKSOURCE_MASK(32);
+ dev->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ if (of_device_is_compatible(np, "ti,am33xx") ||
+ of_device_is_compatible(np, "ti,am43")) {
+ dev->suspend = dmtimer_clocksource_suspend;
+ dev->resume = dmtimer_clocksource_resume;
+ }
+
+ writel_relaxed(0, t->base + t->counter);
+ writel_relaxed(OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR,
+ t->base + t->ctrl);
+
+ pa = of_translate_address(np, of_get_address(np, 0, NULL, NULL));
+ pr_info("TI gptimer clocksource: %s%pOF\n",
+ of_find_property(np, "ti,timer-alwon", NULL) ?
+ "always-on " : "", np->parent);
+
+ if (!dmtimer_sched_clock_counter) {
+ dmtimer_sched_clock_counter = t->base + t->counter;
+ sched_clock_register(dmtimer_read_sched_clock, 32, t->rate);
+ }
+
+ if (clocksource_register_hz(dev, t->rate))
+ pr_err("Could not register clocksource %pOF\n", np);
+
+ return 0;
+
+err_out_free:
+ kfree(clksrc);
+
+ return -ENODEV;
+}
+
+/*
+ * To detect between a clocksource and clockevent, we assume the device tree
+ * has no interrupts configured for a clocksource timer.
+ */
+static int __init dmtimer_systimer_init(struct device_node *np)
+{
+ if (of_get_property(np, "interrupts", NULL) ||
+ of_get_property(np, "interrupts-extended", NULL))
+ return dmtimer_clockevent_init(np);
+ else
+ return dmtimer_clocksource_init(np);
+}
+
+TIMER_OF_DECLARE(dmtimer_systimer, "ti,dmtimer", dmtimer_systimer_init);
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 04/15] clk: ti: dm816: enable sysclk6_ck on init
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
` (2 preceding siblings ...)
2020-04-29 21:53 ` [PATCH 03/15] clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support Tony Lindgren
@ 2020-04-29 21:53 ` Tony Lindgren
2020-04-29 21:53 ` [PATCH 05/15] bus: ti-sysc: Ignore timer12 on secure omap3 Tony Lindgren
` (10 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:53 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, linux-clk,
Michael Turquette, Stephen Boyd, Tero Kristo,
H. Nikolaus Schaller, Aaro Koskinen, Adam Ford, Andreas Kemnade,
Brian Hutchinson, Graeme Smecher, Keerthy, Lokesh Vutla,
devicetree
We need sysclk6_ck enabled early as it is needed by l4_ls and system
timers early on boot. This removes the dependency of system timers to
the interconnect related code that can be then probed later on when
suitable at module_init time.
Cc: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/clk/ti/clk-816x.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/ti/clk-816x.c b/drivers/clk/ti/clk-816x.c
--- a/drivers/clk/ti/clk-816x.c
+++ b/drivers/clk/ti/clk-816x.c
@@ -73,6 +73,7 @@ static const char *enable_init_clks[] = {
"ddr_pll_clk1",
"ddr_pll_clk2",
"ddr_pll_clk3",
+ "sysclk6_ck",
};
int __init dm816x_dt_clk_init(void)
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 05/15] bus: ti-sysc: Ignore timer12 on secure omap3
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
` (3 preceding siblings ...)
2020-04-29 21:53 ` [PATCH 04/15] clk: ti: dm816: enable sysclk6_ck on init Tony Lindgren
@ 2020-04-29 21:53 ` Tony Lindgren
2020-04-29 21:53 ` [PATCH 06/15] ARM: OMAP2+: Add omap_init_time_of() Tony Lindgren
` (9 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:53 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, Keerthy,
Lokesh Vutla, Tero Kristo, H. Nikolaus Schaller, Aaro Koskinen,
Adam Ford, Andreas Kemnade, Brian Hutchinson, Graeme Smecher,
Michael Turquette, Stephen Boyd, devicetree, linux-clk
Some early omap3 boards use timer12 for system timer, but for secure
SoCs like on n900 it's not accessible. Likely we will be configuring
unavailable devices for other SoCs too based on runtime SoC detection,
so let's use a switch to start with.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/bus/ti-sysc.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -2744,6 +2744,17 @@ static int sysc_init_soc(struct sysc *ddata)
if (match && match->data)
sysc_soc->soc = (int)match->data;
+ /* Ignore devices that are not available on HS and EMU SoCs */
+ if (!sysc_soc->general_purpose) {
+ switch (sysc_soc->soc) {
+ case SOC_3430 ... SOC_3630:
+ sysc_add_disabled(0x48304000); /* timer12 */
+ break;
+ default:
+ break;
+ };
+ }
+
match = soc_device_match(sysc_soc_feat_match);
if (!match)
return 0;
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 06/15] ARM: OMAP2+: Add omap_init_time_of()
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
` (4 preceding siblings ...)
2020-04-29 21:53 ` [PATCH 05/15] bus: ti-sysc: Ignore timer12 on secure omap3 Tony Lindgren
@ 2020-04-29 21:53 ` Tony Lindgren
2020-04-29 21:53 ` [PATCH 07/15] ARM: dts: Configure system timers for am335x Tony Lindgren
` (8 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:53 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, Keerthy,
Lokesh Vutla, Tero Kristo, H. Nikolaus Schaller, Aaro Koskinen,
Adam Ford, Andreas Kemnade, Brian Hutchinson, Graeme Smecher,
Michael Turquette, Stephen Boyd, devicetree, linux-clk
This allows us to move the SoCs to probe system timers one SoC
at at time. As arch/arm/mach-omap2/timer.c will be eventually gone,
let's just add omap_init_time_of() to board-generic.c directly.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-generic.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -12,6 +12,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
+#include <linux/clocksource.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
@@ -31,6 +32,13 @@ static void __init __maybe_unused omap_generic_init(void)
omap_soc_device_init();
}
+/* Clocks are needed early, see drivers/clocksource for the rest */
+void __init __maybe_unused omap_init_time_of(void)
+{
+ omap_clk_init();
+ timer_probe();
+}
+
#ifdef CONFIG_SOC_OMAP2420
static const char *const omap242x_boards_compat[] __initconst = {
"ti,omap2420",
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 07/15] ARM: dts: Configure system timers for am335x
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
` (5 preceding siblings ...)
2020-04-29 21:53 ` [PATCH 06/15] ARM: OMAP2+: Add omap_init_time_of() Tony Lindgren
@ 2020-04-29 21:53 ` Tony Lindgren
2020-04-29 21:53 ` [PATCH 08/15] ARM: dts: Configure system timers for am437x Tony Lindgren
` (7 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:53 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, devicetree, Keerthy,
Lokesh Vutla, Tero Kristo, H. Nikolaus Schaller, Aaro Koskinen,
Adam Ford, Andreas Kemnade, Brian Hutchinson, Graeme Smecher,
Michael Turquette, Stephen Boyd, linux-clk
We can now init system timers using the dmtimer and 32k counter
based on only devicetree data and drivers/clocksource timers.
Let's configure the clocksource and clockevent, and drop the old
unused platform data.
As we're just dropping platform data, and the early platform data
init is based on the custom ti,hwmods property, we want to drop
both the platform data and ti,hwmods property in a single patch.
Since the dmtimer can use both 32k clock and system clock as the
source, let's also configure the SoC specific default values. The
board specific dts files can reconfigure these with assigned-clocks
and assigned-clock-parents as needed.
Cc: devicetree@vger.kernel.org
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/am33xx-l4.dtsi | 6 ++---
arch/arm/boot/dts/am33xx.dtsi | 24 +++++++++++++++++++
arch/arm/mach-omap2/board-generic.c | 2 +-
.../omap_hwmod_33xx_43xx_ipblock_data.c | 2 --
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 10 --------
5 files changed, 27 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -330,9 +330,8 @@ scm_clockdomains: clockdomains {
};
};
- target-module@31000 { /* 0x44e31000, ap 25 40.0 */
+ timer1_target: target-module@31000 { /* 0x44e31000, ap 25 40.0 */
compatible = "ti,sysc-omap2-timer", "ti,sysc";
- ti,hwmods = "timer1";
reg = <0x31000 0x4>,
<0x31010 0x4>,
<0x31014 0x4>;
@@ -1117,9 +1116,8 @@ mcasp1: mcasp@0 {
};
};
- target-module@40000 { /* 0x48040000, ap 22 1e.0 */
+ timer2_target: target-module@40000 { /* 0x48040000, ap 22 1e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer2";
reg = <0x40000 0x4>,
<0x40010 0x4>,
<0x40014 0x4>;
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -619,3 +619,27 @@ prm_gfx: prm@1100 {
#reset-cells = <1>;
};
};
+
+/* Timer for clocksource, configured without interrupts */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ /delete-property/interrupts;
+ /delete-property/interrupts-extended;
+ assigned-clocks = <&timer1_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
+
+/* Timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ assigned-clocks = <&timer2_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -236,7 +236,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
.init_early = am33xx_init_early,
.init_machine = omap_generic_init,
.init_late = am33xx_init_late,
- .init_time = omap3_gptimer_timer_init,
+ .init_time = omap_init_time_of,
.dt_compat = am33xx_boards_compat,
.restart = am33xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -367,12 +367,10 @@ struct omap_hwmod am33xx_timer2_hwmod = {
static void omap_hwmod_am33xx_clkctrl(void)
{
- CLKCTRL(am33xx_timer2_hwmod, AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET);
CLKCTRL(am33xx_smartreflex0_hwmod,
AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
CLKCTRL(am33xx_smartreflex1_hwmod,
AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_timer1_hwmod, AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET);
CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET);
PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET);
CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -265,14 +265,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__control = {
.user = OCP_USER_MPU,
};
-/* l4 wkup -> timer1 */
-static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = {
- .master = &am33xx_l4_wkup_hwmod,
- .slave = &am33xx_timer1_hwmod,
- .clk = "dpll_core_m4_div2_ck",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l3_main__emif,
&am33xx_mpu__l3_main,
@@ -291,9 +283,7 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__control,
&am33xx_l4_wkup__smartreflex0,
&am33xx_l4_wkup__smartreflex1,
- &am33xx_l4_wkup__timer1,
&am33xx_l4_wkup__rtc,
- &am33xx_l4_ls__timer2,
&am33xx_l3_s__gpmc,
&am33xx_l3_main__ocmc,
NULL,
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 08/15] ARM: dts: Configure system timers for am437x
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
` (6 preceding siblings ...)
2020-04-29 21:53 ` [PATCH 07/15] ARM: dts: Configure system timers for am335x Tony Lindgren
@ 2020-04-29 21:53 ` Tony Lindgren
2020-04-29 21:53 ` [PATCH 09/15] ARM: dts: Configure system timers for omap4 Tony Lindgren
` (6 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:53 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, devicetree, Keerthy,
Lokesh Vutla, Tero Kristo, H. Nikolaus Schaller, Aaro Koskinen,
Adam Ford, Andreas Kemnade, Brian Hutchinson, Graeme Smecher,
Michael Turquette, Stephen Boyd, linux-clk
We can now init system timers using the dmtimer and 32k counter
based on only devicetree data and drivers/clocksource timers.
Let's configure the clocksource and clockevent, and drop the old
unused platform data.
As we're just dropping platform data, and the early platform data
init is based on the custom ti,hwmods property, we want to drop
both the platform data and ti,hwmods property in a single patch.
Since the dmtimer can use both 32k clock and system clock as the
source, let's also configure the SoC specific default values. The
board specific dts files can reconfigure these with assigned-clocks
and assigned-clock-parents as needed.
Cc: devicetree@vger.kernel.org
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/am4372.dtsi | 24 ++++++++
arch/arm/boot/dts/am437x-l4.dtsi | 7 +--
arch/arm/mach-omap2/board-generic.c | 2 +-
.../omap_hwmod_33xx_43xx_common_data.h | 2 -
.../omap_hwmod_33xx_43xx_interconnect_data.c | 8 ---
.../omap_hwmod_33xx_43xx_ipblock_data.c | 60 -------------------
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 45 --------------
7 files changed, 27 insertions(+), 121 deletions(-)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -553,3 +553,27 @@ prm_device: prm@4000 {
#reset-cells = <1>;
};
};
+
+/* Timer for clocksource, configured without interrupts */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ /delete-property/interrupts;
+ /delete-property/interrupts-extended;
+ assigned-clocks = <&timer1_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
+
+/* Timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ assigned-clocks = <&timer2_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -328,9 +328,8 @@ scm_clockdomains: clockdomains {
};
};
- target-module@31000 { /* 0x44e31000, ap 24 40.0 */
+ timer1_target: target-module@31000 { /* 0x44e31000, ap 24 40.0 */
compatible = "ti,sysc-omap2-timer", "ti,sysc";
- ti,hwmods = "timer1";
reg = <0x31000 0x4>,
<0x31010 0x4>,
<0x31014 0x4>;
@@ -450,7 +449,6 @@ target-module@40000 { /* 0x44e40000, ap 36 68.0 */
target-module@86000 { /* 0x44e86000, ap 40 70.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "counter_32k";
reg = <0x86000 0x4>,
<0x86004 0x4>;
reg-names = "rev", "sysc";
@@ -868,9 +866,8 @@ mcasp1: mcasp@0 {
};
};
- target-module@40000 { /* 0x48040000, ap 18 1e.0 */
+ timer2_target: target-module@40000 { /* 0x48040000, ap 18 1e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer2";
reg = <0x40000 0x4>,
<0x40010 0x4>,
<0x40014 0x4>;
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -308,7 +308,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
.init_late = am43xx_init_late,
.init_irq = omap_gic_of_init,
.init_machine = omap_generic_init,
- .init_time = omap3_gptimer_timer_init,
+ .init_time = omap_init_time_of,
.dt_compat = am43_boards_compat,
.restart = omap44xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -44,8 +44,6 @@ extern struct omap_hwmod am33xx_smartreflex0_hwmod;
extern struct omap_hwmod am33xx_smartreflex1_hwmod;
extern struct omap_hwmod am33xx_gpmc_hwmod;
extern struct omap_hwmod am33xx_rtc_hwmod;
-extern struct omap_hwmod am33xx_timer1_hwmod;
-extern struct omap_hwmod am33xx_timer2_hwmod;
extern struct omap_hwmod_class am33xx_emif_hwmod_class;
extern struct omap_hwmod_class am33xx_l4_hwmod_class;
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -106,14 +106,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
.user = OCP_USER_MPU,
};
-/* l4 per -> timer2 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
- .master = &am33xx_l4_ls_hwmod,
- .slave = &am33xx_timer2_hwmod,
- .clk = "l4ls_gclk",
- .user = OCP_USER_MPU,
-};
-
/* l3 main -> ocmc */
struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
.master = &am33xx_l3_main_hwmod,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -307,64 +307,6 @@ struct omap_hwmod am33xx_rtc_hwmod = {
},
};
-/* 'timer 2-7' class */
-static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSC_HAS_RESET_STATUS,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-struct omap_hwmod_class am33xx_timer_hwmod_class = {
- .name = "timer",
- .sysc = &am33xx_timer_sysc,
-};
-
-/* timer1 1ms */
-static struct omap_hwmod_class_sysconfig am33xx_timer1ms_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_timer1ms_hwmod_class = {
- .name = "timer",
- .sysc = &am33xx_timer1ms_sysc,
-};
-
-struct omap_hwmod am33xx_timer1_hwmod = {
- .name = "timer1",
- .class = &am33xx_timer1ms_hwmod_class,
- .clkdm_name = "l4_wkup_clkdm",
- .main_clk = "timer1_fck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-struct omap_hwmod am33xx_timer2_hwmod = {
- .name = "timer2",
- .class = &am33xx_timer_hwmod_class,
- .clkdm_name = "l4ls_clkdm",
- .main_clk = "timer2_fck",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
static void omap_hwmod_am33xx_clkctrl(void)
{
CLKCTRL(am33xx_smartreflex0_hwmod,
@@ -397,12 +339,10 @@ void omap_hwmod_am33xx_reg(void)
static void omap_hwmod_am43xx_clkctrl(void)
{
- CLKCTRL(am33xx_timer2_hwmod, AM43XX_CM_PER_TIMER2_CLKCTRL_OFFSET);
CLKCTRL(am33xx_smartreflex0_hwmod,
AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
CLKCTRL(am33xx_smartreflex1_hwmod,
AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_timer1_hwmod, AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET);
CLKCTRL(am33xx_rtc_hwmod, AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET);
CLKCTRL(am33xx_gpmc_hwmod, AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET);
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -85,34 +85,6 @@ static struct omap_hwmod am43xx_control_hwmod = {
},
};
-static struct omap_hwmod_class_sysconfig am43xx_synctimer_sysc = {
- .rev_offs = 0x0,
- .sysc_offs = 0x4,
- .sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am43xx_synctimer_hwmod_class = {
- .name = "synctimer",
- .sysc = &am43xx_synctimer_sysc,
-};
-
-static struct omap_hwmod am43xx_synctimer_hwmod = {
- .name = "counter_32k",
- .class = &am43xx_synctimer_hwmod_class,
- .clkdm_name = "l4_wkup_aon_clkdm",
- .flags = HWMOD_SWSUP_SIDLE,
- .main_clk = "synctimer_32kclk",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = AM43XX_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-
static struct omap_hwmod_class_sysconfig am43xx_usb_otg_ss_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
@@ -206,20 +178,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = {
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = {
- .master = &am33xx_l4_wkup_hwmod,
- .slave = &am33xx_timer1_hwmod,
- .clk = "sys_clkin_ck",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_wkup__synctimer = {
- .master = &am33xx_l4_wkup_hwmod,
- .slave = &am43xx_synctimer_hwmod,
- .clk = "sys_clkin_ck",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss0 = {
.master = &am33xx_l3_s_hwmod,
.slave = &am43xx_usb_otg_ss0_hwmod,
@@ -235,7 +193,6 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = {
};
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
- &am33xx_l4_wkup__synctimer,
&am33xx_mpu__l3_main,
&am33xx_mpu__prcm,
&am33xx_l3_s__l4_ls,
@@ -252,8 +209,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_wkup__control,
&am43xx_l4_wkup__smartreflex0,
&am43xx_l4_wkup__smartreflex1,
- &am43xx_l4_wkup__timer1,
- &am33xx_l4_ls__timer2,
&am33xx_l3_s__gpmc,
&am33xx_l3_main__ocmc,
&am43xx_l3_s__usbotgss0,
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 09/15] ARM: dts: Configure system timers for omap4
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
` (7 preceding siblings ...)
2020-04-29 21:53 ` [PATCH 08/15] ARM: dts: Configure system timers for am437x Tony Lindgren
@ 2020-04-29 21:53 ` Tony Lindgren
2020-04-29 21:53 ` [PATCH 10/15] ARM: dts: Configure system timers for omap5 and dra7 Tony Lindgren
` (5 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:53 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, devicetree, Keerthy,
Lokesh Vutla, Tero Kristo, H. Nikolaus Schaller, Aaro Koskinen,
Adam Ford, Andreas Kemnade, Brian Hutchinson, Graeme Smecher,
Michael Turquette, Stephen Boyd, linux-clk
We can now init system timers using the dmtimer and 32k counter
based on only devicetree data and drivers/clocksource timers.
Let's configure the clocksource and clockevent, and drop the old
unused platform data.
As we're just dropping platform data, and the early platform data
init is based on the custom ti,hwmods property, we want to drop
both the platform data and ti,hwmods property in a single patch.
Since the dmtimer can use both 32k clock and system clock as the
source, let's also configure the SoC specific default values. The
board specific dts files can reconfigure these with assigned-clocks
and assigned-clock-parents as needed.
Cc: devicetree@vger.kernel.org
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/omap4-l4.dtsi | 4 +-
arch/arm/boot/dts/omap4.dtsi | 11 +++
arch/arm/mach-omap2/board-generic.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 90 ----------------------
4 files changed, 13 insertions(+), 94 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -974,7 +974,6 @@ segment@0 { /* 0x4a300000 */
target-module@4000 { /* 0x4a304000, ap 17 24.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "counter_32k";
reg = <0x4000 0x4>,
<0x4004 0x4>;
reg-names = "rev", "sysc";
@@ -1139,9 +1138,8 @@ wdt2: wdt@0 {
};
};
- target-module@8000 { /* 0x4a318000, ap 9 1c.0 */
+ timer1_target: target-module@8000 { /* 0x4a318000, ap 9 1c.0 */
compatible = "ti,sysc-omap2-timer", "ti,sysc";
- ti,hwmods = "timer1";
reg = <0x8000 0x4>,
<0x8010 0x4>,
<0x8014 0x4>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -655,3 +655,14 @@ prm_device: prm@1b00 {
#reset-cells = <1>;
};
};
+
+/* Timer for clockevent */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ assigned-clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -261,7 +261,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
.init_irq = omap_gic_of_init,
.init_machine = omap_generic_init,
.init_late = omap4430_init_late,
- .init_time = omap4_local_timer_init,
+ .init_time = omap_init_time_of,
.dt_compat = omap4_boards_compat,
.restart = omap44xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -231,39 +231,6 @@ static struct omap_hwmod omap44xx_ocp_wp_noc_hwmod = {
* usim
*/
-/*
- * 'counter' class
- * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0004,
- .sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_counter_hwmod_class = {
- .name = "counter",
- .sysc = &omap44xx_counter_sysc,
-};
-
-/* counter_32k */
-static struct omap_hwmod omap44xx_counter_32k_hwmod = {
- .name = "counter_32k",
- .class = &omap44xx_counter_hwmod_class,
- .clkdm_name = "l4_wkup_clkdm",
- .flags = HWMOD_SWSUP_SIDLE,
- .main_clk = "sys_32k_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET,
- },
- },
-};
-
/*
* 'ctrl_module' class
* attila core control module + core pad control module + wkup pad control
@@ -672,45 +639,6 @@ static struct omap_hwmod omap44xx_sl2if_hwmod = {
},
};
-/*
- * 'timer' class
- * general purpose timer module with accurate 1ms tick
- * This class contains several variants: ['timer_1ms', 'timer']
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_timer_1ms_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_EMUFREE | SYSC_HAS_ENAWAKEUP |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_timer_1ms_hwmod_class = {
- .name = "timer",
- .sysc = &omap44xx_timer_1ms_sysc,
-};
-
-/* timer1 */
-static struct omap_hwmod omap44xx_timer1_hwmod = {
- .name = "timer1",
- .class = &omap44xx_timer_1ms_hwmod_class,
- .clkdm_name = "l4_wkup_clkdm",
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
- .main_clk = "dmt1_clk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_WKUP_TIMER1_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
/*
* 'usb_host_fs' class
* full-speed usb host controller
@@ -1063,14 +991,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp_wp_noc = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_wkup -> counter_32k */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = {
- .master = &omap44xx_l4_wkup_hwmod,
- .slave = &omap44xx_counter_32k_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_cfg -> ctrl_module_core */
static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ctrl_module_core = {
.master = &omap44xx_l4_cfg_hwmod,
@@ -1199,14 +1119,6 @@ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = {
- .master = &omap44xx_l4_wkup_hwmod,
- .slave = &omap44xx_timer1_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_cfg -> usb_host_fs */
static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
.master = &omap44xx_l4_cfg_hwmod,
@@ -1273,7 +1185,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_cfg__l4_wkup,
&omap44xx_mpu__mpu_private,
&omap44xx_l4_cfg__ocp_wp_noc,
- &omap44xx_l4_wkup__counter_32k,
&omap44xx_l4_cfg__ctrl_module_core,
&omap44xx_l4_cfg__ctrl_module_pad_core,
&omap44xx_l4_wkup__ctrl_module_wkup,
@@ -1290,7 +1201,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_wkup__prm,
&omap44xx_l4_wkup__scrm,
/* &omap44xx_l3_main_2__sl2if, */
- &omap44xx_l4_wkup__timer1,
/* &omap44xx_l4_cfg__usb_host_fs, */
&omap44xx_l4_cfg__usb_host_hs,
&omap44xx_l4_cfg__usb_tll_hs,
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 10/15] ARM: dts: Configure system timers for omap5 and dra7
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
` (8 preceding siblings ...)
2020-04-29 21:53 ` [PATCH 09/15] ARM: dts: Configure system timers for omap4 Tony Lindgren
@ 2020-04-29 21:53 ` Tony Lindgren
2020-04-29 21:53 ` [PATCH 11/15] ARM: dts: Configure system timers for omap3 Tony Lindgren
` (4 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:53 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, devicetree, Keerthy,
Lokesh Vutla, Tero Kristo, H. Nikolaus Schaller, Aaro Koskinen,
Adam Ford, Andreas Kemnade, Brian Hutchinson, Graeme Smecher,
Michael Turquette, Stephen Boyd, linux-clk
We can now init system timers using the dmtimer and 32k counter
based on only devicetree data and drivers/clocksource timers.
Let's configure the clocksource and clockevent, and drop the old
unused platform data.
As we're just dropping platform data, and the early platform data
init is based on the custom ti,hwmods property, we want to drop
both the platform data and ti,hwmods property in a single patch.
Since the dmtimer can use both 32k clock and system clock as the
source, let's also configure the SoC specific default values. The
board specific dts files can reconfigure these with assigned-clocks
and assigned-clock-parents as needed.
Note that similar to omap_init_time_of(), we now need to call
omap_clk_init() also from omap5_realtime_timer_init().
Cc: devicetree@vger.kernel.org
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/dra7-l4.dtsi | 7 +-
arch/arm/boot/dts/dra7.dtsi | 11 ++
arch/arm/boot/dts/omap5-l4.dtsi | 4 +-
arch/arm/boot/dts/omap5.dtsi | 11 ++
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 89 -----------
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 176 ---------------------
arch/arm/mach-omap2/timer.c | 17 +-
7 files changed, 25 insertions(+), 290 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1143,7 +1143,6 @@ uart3: serial@0 {
target-module@32000 { /* 0x48032000, ap 5 3e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer2";
reg = <0x32000 0x4>,
<0x32010 0x4>;
reg-names = "rev", "sysc";
@@ -1171,7 +1170,6 @@ timer2: timer@0 {
target-module@34000 { /* 0x48034000, ap 7 46.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer3";
reg = <0x34000 0x4>,
<0x34010 0x4>;
reg-names = "rev", "sysc";
@@ -1199,7 +1197,6 @@ timer3: timer@0 {
target-module@36000 { /* 0x48036000, ap 9 4e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer4";
reg = <0x36000 0x4>,
<0x36010 0x4>;
reg-names = "rev", "sysc";
@@ -4295,7 +4292,6 @@ segment@0 { /* 0x4ae00000 */
target-module@4000 { /* 0x4ae04000, ap 15 40.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "counter_32k";
reg = <0x4000 0x4>,
<0x4010 0x4>;
reg-names = "rev", "sysc";
@@ -4430,9 +4426,8 @@ wdt2: wdt@0 {
};
};
- target-module@8000 { /* 0x4ae18000, ap 9 30.0 */
+ timer1_target: target-module@8000 { /* 0x4ae18000, ap 9 30.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer1";
reg = <0x8000 0x4>,
<0x8010 0x4>;
reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1044,3 +1044,14 @@ prm_eve4: prm@1c00 {
reg = <0x1c00 0x60>;
};
};
+
+/* Timer for clockevent */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ assigned-clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -2150,7 +2150,6 @@ segment@0 { /* 0x4ae00000 */
target-module@4000 { /* 0x4ae04000, ap 17 20.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "counter_32k";
reg = <0x4000 0x4>,
<0x4010 0x4>;
reg-names = "rev", "sysc";
@@ -2336,9 +2335,8 @@ wdt2: wdt@0 {
};
};
- target-module@8000 { /* 0x4ae18000, ap 9 18.0 */
+ timer1_target: target-module@8000 { /* 0x4ae18000, ap 9 18.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer1";
reg = <0x8000 0x4>,
<0x8010 0x4>;
reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -581,3 +581,14 @@ prm_device: prm@1c00 {
#reset-cells = <1>;
};
};
+
+/* Timer for clockevent */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ assigned-clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+ };
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -193,39 +193,6 @@ static struct omap_hwmod omap54xx_mpu_private_hwmod = {
},
};
-/*
- * 'counter' class
- * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_counter_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_counter_hwmod_class = {
- .name = "counter",
- .sysc = &omap54xx_counter_sysc,
-};
-
-/* counter_32k */
-static struct omap_hwmod omap54xx_counter_32k_hwmod = {
- .name = "counter_32k",
- .class = &omap54xx_counter_hwmod_class,
- .clkdm_name = "wkupaon_clkdm",
- .flags = HWMOD_SWSUP_SIDLE,
- .main_clk = "wkupaon_iclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_WKUPAON_COUNTER_32K_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_WKUPAON_COUNTER_32K_CONTEXT_OFFSET,
- },
- },
-};
-
/*
* 'emif' class
* external memory interface no1 (wrapper)
@@ -299,44 +266,6 @@ static struct omap_hwmod omap54xx_mpu_hwmod = {
},
};
-
-/*
- * 'timer' class
- * general purpose timer module with accurate 1ms tick
- * This class contains several variants: ['timer_1ms', 'timer']
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_timer_1ms_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_timer_1ms_hwmod_class = {
- .name = "timer",
- .sysc = &omap54xx_timer_1ms_sysc,
-};
-
-/* timer1 */
-static struct omap_hwmod omap54xx_timer1_hwmod = {
- .name = "timer1",
- .class = &omap54xx_timer_1ms_hwmod_class,
- .clkdm_name = "wkupaon_clkdm",
- .main_clk = "timer1_gfclk_mux",
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_WKUPAON_TIMER1_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_WKUPAON_TIMER1_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
/*
* 'usb_host_hs' class
* high-speed multi-port usb host controller
@@ -666,14 +595,6 @@ static struct omap_hwmod_ocp_if omap54xx_mpu__mpu_private = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_wkup -> counter_32k */
-static struct omap_hwmod_ocp_if omap54xx_l4_wkup__counter_32k = {
- .master = &omap54xx_l4_wkup_hwmod,
- .slave = &omap54xx_counter_32k_hwmod,
- .clk = "wkupaon_iclk_mux",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* mpu -> emif1 */
static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = {
.master = &omap54xx_mpu_hwmod,
@@ -698,14 +619,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = {
- .master = &omap54xx_l4_wkup_hwmod,
- .slave = &omap54xx_timer1_hwmod,
- .clk = "wkupaon_iclk_mux",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_cfg -> usb_host_hs */
static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = {
.master = &omap54xx_l4_cfg_hwmod,
@@ -747,11 +660,9 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
&omap54xx_l3_main_2__l4_per,
&omap54xx_l3_main_1__l4_wkup,
&omap54xx_mpu__mpu_private,
- &omap54xx_l4_wkup__counter_32k,
&omap54xx_mpu__emif1,
&omap54xx_mpu__emif2,
&omap54xx_l4_cfg__mpu,
- &omap54xx_l4_wkup__timer1,
&omap54xx_l4_cfg__usb_host_hs,
&omap54xx_l4_cfg__usb_tll_hs,
&omap54xx_l4_cfg__usb_otg_ss,
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -221,40 +221,6 @@ static struct omap_hwmod dra7xx_bb2d_hwmod = {
},
};
-/*
- * 'counter' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_counter_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class dra7xx_counter_hwmod_class = {
- .name = "counter",
- .sysc = &dra7xx_counter_sysc,
-};
-
-/* counter_32k */
-static struct omap_hwmod dra7xx_counter_32k_hwmod = {
- .name = "counter_32k",
- .class = &dra7xx_counter_hwmod_class,
- .clkdm_name = "wkupaon_clkdm",
- .flags = HWMOD_SWSUP_SIDLE,
- .main_clk = "wkupaon_iclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_WKUPAON_COUNTER_32K_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_WKUPAON_COUNTER_32K_CONTEXT_OFFSET,
- },
- },
-};
-
/*
* 'ctrl_module' class
*
@@ -525,103 +491,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = {
},
};
-/*
- * 'timer' class
- *
- * This class contains several variants: ['timer_1ms', 'timer_secure',
- * 'timer']
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_timer_1ms_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class dra7xx_timer_1ms_hwmod_class = {
- .name = "timer",
- .sysc = &dra7xx_timer_1ms_sysc,
-};
-
-static struct omap_hwmod_class_sysconfig dra7xx_timer_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class dra7xx_timer_hwmod_class = {
- .name = "timer",
- .sysc = &dra7xx_timer_sysc,
-};
-
-/* timer1 */
-static struct omap_hwmod dra7xx_timer1_hwmod = {
- .name = "timer1",
- .class = &dra7xx_timer_1ms_hwmod_class,
- .clkdm_name = "wkupaon_clkdm",
- .main_clk = "timer1_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_WKUPAON_TIMER1_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_WKUPAON_TIMER1_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer2 */
-static struct omap_hwmod dra7xx_timer2_hwmod = {
- .name = "timer2",
- .class = &dra7xx_timer_1ms_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .main_clk = "timer2_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER_TIMER2_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER_TIMER2_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer3 */
-static struct omap_hwmod dra7xx_timer3_hwmod = {
- .name = "timer3",
- .class = &dra7xx_timer_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .main_clk = "timer3_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER_TIMER3_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER_TIMER3_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* timer4 */
-static struct omap_hwmod dra7xx_timer4_hwmod = {
- .name = "timer4",
- .class = &dra7xx_timer_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .main_clk = "timer4_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER_TIMER4_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER_TIMER4_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
/*
* 'usb_otg_ss' class
*
@@ -864,14 +733,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__bb2d = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_wkup -> counter_32k */
-static struct omap_hwmod_ocp_if dra7xx_l4_wkup__counter_32k = {
- .master = &dra7xx_l4_wkup_hwmod,
- .slave = &dra7xx_counter_32k_hwmod,
- .clk = "wkupaon_iclk_mux",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_wkup -> ctrl_module_wkup */
static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
.master = &dra7xx_l4_wkup_hwmod,
@@ -952,38 +813,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_wkup__timer1 = {
- .master = &dra7xx_l4_wkup_hwmod,
- .slave = &dra7xx_timer1_hwmod,
- .clk = "wkupaon_iclk_mux",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> timer2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer2 = {
- .master = &dra7xx_l4_per1_hwmod,
- .slave = &dra7xx_timer2_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> timer3 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer3 = {
- .master = &dra7xx_l4_per1_hwmod,
- .slave = &dra7xx_timer3_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> timer4 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer4 = {
- .master = &dra7xx_l4_per1_hwmod,
- .slave = &dra7xx_timer4_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_per3 -> usb_otg_ss1 */
static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = {
.master = &dra7xx_l4_per3_hwmod,
@@ -1062,7 +891,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l3_main_1__l4_wkup,
&dra7xx_l4_per2__atl,
&dra7xx_l3_main_1__bb2d,
- &dra7xx_l4_wkup__counter_32k,
&dra7xx_l4_wkup__ctrl_module_wkup,
&dra7xx_l3_main_1__gpmc,
&dra7xx_l4_cfg__mpu,
@@ -1072,10 +900,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_cfg__pciess2,
&dra7xx_l3_main_1__qspi,
&dra7xx_l4_cfg__sata,
- &dra7xx_l4_wkup__timer1,
- &dra7xx_l4_per1__timer2,
- &dra7xx_l4_per1__timer3,
- &dra7xx_l4_per1__timer4,
&dra7xx_l4_per3__usb_otg_ss1,
&dra7xx_l4_per3__usb_otg_ss2,
&dra7xx_l4_per3__usb_otg_ss3,
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -576,21 +576,6 @@ void __init omap3_gptimer_timer_init(void)
}
#endif
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
- defined(CONFIG_SOC_DRA7XX)
-static void __init omap4_sync32k_timer_init(void)
-{
- __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
- 0, NULL, NULL, false);
-}
-
-void __init omap4_local_timer_init(void)
-{
- omap4_sync32k_timer_init();
- timer_probe();
-}
-#endif
-
#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
/*
@@ -708,7 +693,7 @@ static void __init realtime_counter_init(void)
void __init omap5_realtime_timer_init(void)
{
- omap4_sync32k_timer_init();
+ omap_clk_init();
realtime_counter_init();
timer_probe();
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 11/15] ARM: dts: Configure system timers for omap3
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
` (9 preceding siblings ...)
2020-04-29 21:53 ` [PATCH 10/15] ARM: dts: Configure system timers for omap5 and dra7 Tony Lindgren
@ 2020-04-29 21:53 ` Tony Lindgren
2020-05-02 15:38 ` Adam Ford
2020-04-29 21:53 ` [PATCH 12/15] ARM: dts: Configure system timers for ti81xx Tony Lindgren
` (3 subsequent siblings)
14 siblings, 1 reply; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:53 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, devicetree,
Adam Ford, Andreas Kemnade, H. Nikolaus Schaller, Keerthy,
Lokesh Vutla, Tero Kristo, Aaro Koskinen, Brian Hutchinson,
Graeme Smecher, Michael Turquette, Stephen Boyd, linux-clk
We can now init system timers using the dmtimer and 32k counter
based on only devicetree data and drivers/clocksource timers.
Let's configure the clocksource and clockevent, and drop the old
unused platform data.
As we're just dropping platform data, and the early platform data
init is based on the custom ti,hwmods property, we want to drop
both the platform data and ti,hwmods property in a single patch.
Since the dmtimer can use both 32k clock and system clock as the
source, let's also configure the SoC specific default values. The
board specific dts files can reconfigure these with assigned-clocks
and assigned-clock-parents as needed.
Let's also update the dts file to use #include while at it.
Cc: devicetree@vger.kernel.org
Cc: Adam Ford <aford173@gmail.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/am3517.dtsi | 28 +++-
arch/arm/boot/dts/omap3-beagle.dts | 33 +++++
arch/arm/boot/dts/omap3-devkit8000.dts | 33 +++++
arch/arm/boot/dts/omap3.dtsi | 135 +++++++++++++++----
arch/arm/mach-omap2/board-generic.c | 10 +-
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 146 +--------------------
6 files changed, 210 insertions(+), 175 deletions(-)
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -169,5 +169,29 @@ &mmu_isp {
status = "disabled";
};
-/include/ "am35xx-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
+#include "am35xx-clocks.dtsi"
+#include "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
+
+/* Timer for clocksource, configured without interrupts */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ /delete-property/interrupts;
+ /delete-property/interrupts-extended;
+ assigned-clocks = <&gpt1_fck>;
+ assigned-clock-parents = <&sys_ck>;
+ };
+};
+
+/* Timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ assigned-clocks = <&gpt2_fck>;
+ assigned-clock-parents = <&sys_ck>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -304,6 +304,39 @@ &usbhsehci {
phys = <0 &hsusb2_phy>;
};
+/* Unusable as clockevent, allow to idle */
+&timer1_target {
+ /delete-property/ti,no-reset-on-init;
+ /delete-property/ti,no-idle;
+ timer@0 {
+ compatible = "ti,omap3430-timer";
+ interrupts = <37>;
+ };
+};
+
+/* Timer for clocksource, configured without interrupts */
+&timer12_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ /delete-property/interrupts;
+ /delete-property/interrupts-extended;
+ /* Always clocked by secure_32k_fck */
+ };
+};
+
+/* Timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ assigned-clocks = <&gpt2_fck>;
+ assigned-clock-parents = <&sys_ck>;
+ };
+};
+
&twl_gpio {
ti,use-leds;
/* pullups: BIT(1) */
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -14,3 +14,36 @@ aliases {
display2 = &tv0;
};
};
+
+/* Unusable as clockevent, allow to idle */
+&timer1_target {
+ /delete-property/ti,no-reset-on-init;
+ /delete-property/ti,no-idle;
+ timer@0 {
+ compatible = "ti,omap3430-timer";
+ interrupts = <37>;
+ };
+};
+
+/* Timer for clocksource, configured without interrupts */
+&timer12_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ /delete-property/interrupts;
+ /delete-property/interrupts-extended;
+ /* Always clocked by secure_32k_fck */
+ };
+};
+
+/* Timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ assigned-clocks = <&gpt2_fck>;
+ assigned-clock-parents = <&sys_ck>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -193,10 +193,23 @@ cm_clockdomains: clockdomains {
};
};
- counter32k: counter@48320000 {
- compatible = "ti,omap-counter32k";
- reg = <0x48320000 0x20>;
- ti,hwmods = "counter_32k";
+ target-module@48320000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x48320000 0x4>,
+ <0x48320004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ clocks = <&wkup_32k_fck>, <&omap_32ksync_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48320000 0x1000>;
+
+ counter32k: counter@0 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x0 0x20>;
+ };
};
intc: interrupt-controller@48200000 {
@@ -637,19 +650,63 @@ sham: sham@480c3000 {
dma-names = "rx";
};
- timer1: timer@48318000 {
- compatible = "ti,omap3430-timer";
- reg = <0x48318000 0x400>;
- interrupts = <37>;
- ti,hwmods = "timer1";
- ti,timer-alwon;
+ timer1_target: target-module@48318000 {
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x48318000 0x4>,
+ <0x48318010 0x4>,
+ <0x48318014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&gpt1_fck>, <&gpt1_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48318000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&gpt1_fck>;
+ clock-names = "fck";
+ interrupts = <37>;
+ ti,timer-alwon;
+ };
};
- timer2: timer@49032000 {
- compatible = "ti,omap3430-timer";
- reg = <0x49032000 0x400>;
- interrupts = <38>;
- ti,hwmods = "timer2";
+ timer2_target: target-module@49032000 {
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x49032000 0x4>,
+ <0x49032010 0x4>,
+ <0x49032014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&gpt2_fck>, <&gpt2_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49032000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,omap3430-timer";
+ reg = <0 0x400>;
+ interrupts = <38>;
+ };
};
timer3: timer@49034000 {
@@ -723,13 +780,34 @@ timer11: timer@48088000 {
ti,timer-pwm;
};
- timer12: timer@48304000 {
- compatible = "ti,omap3430-timer";
- reg = <0x48304000 0x400>;
- interrupts = <95>;
- ti,hwmods = "timer12";
- ti,timer-alwon;
- ti,timer-secure;
+ timer12_target: target-module@48304000 {
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x48304000 0x4>,
+ <0x48304010 0x4>,
+ <0x48304014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&gpt12_fck>, <&gpt12_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48304000 0x1000>;
+
+ timer12: timer@0 {
+ compatible = "ti,omap3430-timer";
+ reg = <0 0x400>;
+ interrupts = <95>;
+ ti,timer-alwon;
+ ti,timer-secure;
+ };
};
usbhstll: usbhstll@48062000 {
@@ -886,4 +964,15 @@ ssi_port2: ssi-port@4805b000 {
};
};
-/include/ "omap3xxx-clocks.dtsi"
+#include "omap3xxx-clocks.dtsi"
+
+/* Timer for clockevent */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ assigned-clocks = <&gpt1_fck>;
+ assigned-clock-parents = <&omap_32k_fck>;
+ };
+};
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -114,7 +114,7 @@ DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board")
.init_early = omap3430_init_early,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
- .init_time = omap_init_time,
+ .init_time = omap_init_time_of,
.dt_compat = n900_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
@@ -132,7 +132,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
.init_early = omap3430_init_early,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
- .init_time = omap_init_time,
+ .init_time = omap_init_time_of,
.dt_compat = omap3_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
@@ -149,7 +149,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
.init_early = omap3630_init_early,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
- .init_time = omap_init_time,
+ .init_time = omap_init_time_of,
.dt_compat = omap36xx_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
@@ -166,7 +166,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
.init_early = omap3430_init_early,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
- .init_time = omap3_secure_sync32k_timer_init,
+ .init_time = omap_init_time_of,
.dt_compat = omap3_gp_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
@@ -182,7 +182,7 @@ DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)")
.init_early = am35xx_init_early,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
- .init_time = omap3_gptimer_timer_init,
+ .init_time = omap_init_time_of,
.dt_compat = am3517_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -147,36 +147,6 @@ static struct omap_hwmod_class omap3xxx_timer_hwmod_class = {
.sysc = &omap3xxx_timer_sysc,
};
-/* timer1 */
-static struct omap_hwmod omap3xxx_timer1_hwmod = {
- .name = "timer1",
- .main_clk = "gpt1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT,
- },
- },
- .class = &omap3xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-/* timer2 */
-static struct omap_hwmod omap3xxx_timer2_hwmod = {
- .name = "timer2",
- .main_clk = "gpt2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = OMAP3430_PER_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT,
- },
- },
- .class = &omap3xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
/* timer3 */
static struct omap_hwmod omap3xxx_timer3_hwmod = {
.name = "timer3",
@@ -312,21 +282,6 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = {
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
-/* timer12 */
-static struct omap_hwmod omap3xxx_timer12_hwmod = {
- .name = "timer12",
- .main_clk = "gpt12_fck",
- .prcm = {
- .omap2 = {
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT,
- },
- },
- .class = &omap3xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
/*
* 'wd_timer' class
* 32-bit watchdog upward counter that generates a pulse on the reset pin on
@@ -1524,38 +1479,6 @@ static struct omap_hwmod omap3xxx_sad2d_hwmod = {
.class = &omap3xxx_sad2d_class,
};
-/*
- * '32K sync counter' class
- * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
- */
-static struct omap_hwmod_class_sysconfig omap3xxx_counter_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0004,
- .sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_counter_hwmod_class = {
- .name = "counter",
- .sysc = &omap3xxx_counter_sysc,
-};
-
-static struct omap_hwmod omap3xxx_counter_32k_hwmod = {
- .name = "counter_32k",
- .class = &omap3xxx_counter_hwmod_class,
- .clkdm_name = "wkup_clkdm",
- .flags = HWMOD_SWSUP_SIDLE,
- .main_clk = "wkup_32k_fck",
- .prcm = {
- .omap2 = {
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_32KSYNC_SHIFT,
- },
- },
-};
-
/*
* 'gpmc' class
* general purpose memory controller
@@ -1868,25 +1791,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l3__iva = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = {
- .master = &omap3xxx_l4_wkup_hwmod,
- .slave = &omap3xxx_timer1_hwmod,
- .clk = "gpt1_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-
-/* l4_per -> timer2 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_timer2_hwmod,
- .clk = "gpt2_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-
/* l4_per -> timer3 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = {
.master = &omap3xxx_l4_per_hwmod,
@@ -1965,15 +1869,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-
-/* l4_core -> timer12 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_sec__timer12 = {
- .master = &omap3xxx_l4_sec_hwmod,
- .slave = &omap3xxx_timer12_hwmod,
- .clk = "gpt12_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_wkup -> wd_timer2 */
static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = {
@@ -2325,16 +2220,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__hdq1w = {
.flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
};
-/* l4_wkup -> 32ksync_counter */
-
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = {
- .master = &omap3xxx_l4_wkup_hwmod,
- .slave = &omap3xxx_counter_32k_hwmod,
- .clk = "omap_32ksync_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* am35xx has Davinci MDIO & EMAC */
static struct omap_hwmod_class am35xx_mdio_class = {
.name = "davinci_mdio",
@@ -2551,8 +2436,6 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
&omap3_l4_core__i2c2,
&omap3_l4_core__i2c3,
&omap3xxx_l4_wkup__l4_sec,
- &omap3xxx_l4_wkup__timer1,
- &omap3xxx_l4_per__timer2,
&omap3xxx_l4_per__timer3,
&omap3xxx_l4_per__timer4,
&omap3xxx_l4_per__timer5,
@@ -2580,27 +2463,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
&omap34xx_l4_core__mcspi2,
&omap34xx_l4_core__mcspi3,
&omap34xx_l4_core__mcspi4,
- &omap3xxx_l4_wkup__counter_32k,
&omap3xxx_l3_main__gpmc,
NULL,
};
-/* GP-only hwmod links */
-static struct omap_hwmod_ocp_if *omap34xx_gp_hwmod_ocp_ifs[] __initdata = {
- &omap3xxx_l4_sec__timer12,
- NULL,
-};
-
-static struct omap_hwmod_ocp_if *omap36xx_gp_hwmod_ocp_ifs[] __initdata = {
- &omap3xxx_l4_sec__timer12,
- NULL,
-};
-
-static struct omap_hwmod_ocp_if *am35xx_gp_hwmod_ocp_ifs[] __initdata = {
- &omap3xxx_l4_sec__timer12,
- NULL,
-};
-
/* crypto hwmod links */
static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__sham,
@@ -2774,7 +2640,7 @@ static bool __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus,
int __init omap3xxx_hwmod_init(void)
{
int r;
- struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL, **h_sham = NULL;
+ struct omap_hwmod_ocp_if **h = NULL, **h_sham = NULL;
struct omap_hwmod_ocp_if **h_aes = NULL;
struct device_node *bus;
unsigned int rev;
@@ -2797,18 +2663,15 @@ int __init omap3xxx_hwmod_init(void)
rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 ||
rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
h = omap34xx_hwmod_ocp_ifs;
- h_gp = omap34xx_gp_hwmod_ocp_ifs;
h_sham = omap34xx_sham_hwmod_ocp_ifs;
h_aes = omap34xx_aes_hwmod_ocp_ifs;
} else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) {
h = am35xx_hwmod_ocp_ifs;
- h_gp = am35xx_gp_hwmod_ocp_ifs;
h_sham = am35xx_sham_hwmod_ocp_ifs;
h_aes = am35xx_aes_hwmod_ocp_ifs;
} else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
rev == OMAP3630_REV_ES1_2) {
h = omap36xx_hwmod_ocp_ifs;
- h_gp = omap36xx_gp_hwmod_ocp_ifs;
h_sham = omap36xx_sham_hwmod_ocp_ifs;
h_aes = omap36xx_aes_hwmod_ocp_ifs;
} else {
@@ -2820,13 +2683,6 @@ int __init omap3xxx_hwmod_init(void)
if (r < 0)
return r;
- /* Register GP-only hwmod links. */
- if (h_gp && omap_type() == OMAP2_DEVICE_TYPE_GP) {
- r = omap_hwmod_register_links(h_gp);
- if (r < 0)
- return r;
- }
-
/*
* Register crypto hwmod links only if they are not disabled in DT.
* If DT information is missing, enable them only for GP devices.
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH 11/15] ARM: dts: Configure system timers for omap3
2020-04-29 21:53 ` [PATCH 11/15] ARM: dts: Configure system timers for omap3 Tony Lindgren
@ 2020-05-02 15:38 ` Adam Ford
0 siblings, 0 replies; 19+ messages in thread
From: Adam Ford @ 2020-05-02 15:38 UTC (permalink / raw)
To: Tony Lindgren
Cc: Daniel Lezcano, Thomas Gleixner, Linux Kernel Mailing List,
Linux-OMAP, arm-soc, devicetree, Andreas Kemnade,
H. Nikolaus Schaller, Keerthy, Lokesh Vutla, Tero Kristo,
Aaro Koskinen, Brian Hutchinson, Graeme Smecher,
Michael Turquette, Stephen Boyd, linux-clk
On Wed, Apr 29, 2020 at 4:54 PM Tony Lindgren <tony@atomide.com> wrote:
>
> We can now init system timers using the dmtimer and 32k counter
> based on only devicetree data and drivers/clocksource timers.
> Let's configure the clocksource and clockevent, and drop the old
> unused platform data.
>
> As we're just dropping platform data, and the early platform data
> init is based on the custom ti,hwmods property, we want to drop
> both the platform data and ti,hwmods property in a single patch.
>
> Since the dmtimer can use both 32k clock and system clock as the
> source, let's also configure the SoC specific default values. The
> board specific dts files can reconfigure these with assigned-clocks
> and assigned-clock-parents as needed.
>
> Let's also update the dts file to use #include while at it.
>
> Cc: devicetree@vger.kernel.org
> Cc: Adam Ford <aford173@gmail.com>
> Cc: Andreas Kemnade <andreas@kemnade.info>
> Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
> Cc: Keerthy <j-keerthy@ti.com>
> Cc: Lokesh Vutla <lokeshvutla@ti.com>
> Cc: Tero Kristo <t-kristo@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> arch/arm/boot/dts/am3517.dtsi | 28 +++-
For the series on the am3517-evm,
Tested-by: Adam Ford <aford173@gmail.com>
> arch/arm/boot/dts/omap3-beagle.dts | 33 +++++
> arch/arm/boot/dts/omap3-devkit8000.dts | 33 +++++
> arch/arm/boot/dts/omap3.dtsi | 135 +++++++++++++++----
> arch/arm/mach-omap2/board-generic.c | 10 +-
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 146 +--------------------
> 6 files changed, 210 insertions(+), 175 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
> --- a/arch/arm/boot/dts/am3517.dtsi
> +++ b/arch/arm/boot/dts/am3517.dtsi
> @@ -169,5 +169,29 @@ &mmu_isp {
> status = "disabled";
> };
>
> -/include/ "am35xx-clocks.dtsi"
> -/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
> +#include "am35xx-clocks.dtsi"
> +#include "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
> +
> +/* Timer for clocksource, configured without interrupts */
> +&timer1_target {
> + ti,no-reset-on-init;
> + ti,no-idle;
> + timer@0 {
> + compatible = "ti,dmtimer";
> + /delete-property/interrupts;
> + /delete-property/interrupts-extended;
> + assigned-clocks = <&gpt1_fck>;
> + assigned-clock-parents = <&sys_ck>;
> + };
> +};
> +
> +/* Timer for clockevent */
> +&timer2_target {
> + ti,no-reset-on-init;
> + ti,no-idle;
> + timer@0 {
> + compatible = "ti,dmtimer";
> + assigned-clocks = <&gpt2_fck>;
> + assigned-clock-parents = <&sys_ck>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -304,6 +304,39 @@ &usbhsehci {
> phys = <0 &hsusb2_phy>;
> };
>
> +/* Unusable as clockevent, allow to idle */
> +&timer1_target {
> + /delete-property/ti,no-reset-on-init;
> + /delete-property/ti,no-idle;
> + timer@0 {
> + compatible = "ti,omap3430-timer";
> + interrupts = <37>;
> + };
> +};
> +
> +/* Timer for clocksource, configured without interrupts */
> +&timer12_target {
> + ti,no-reset-on-init;
> + ti,no-idle;
> + timer@0 {
> + compatible = "ti,dmtimer";
> + /delete-property/interrupts;
> + /delete-property/interrupts-extended;
> + /* Always clocked by secure_32k_fck */
> + };
> +};
> +
> +/* Timer for clockevent */
> +&timer2_target {
> + ti,no-reset-on-init;
> + ti,no-idle;
> + timer@0 {
> + compatible = "ti,dmtimer";
> + assigned-clocks = <&gpt2_fck>;
> + assigned-clock-parents = <&sys_ck>;
> + };
> +};
> +
> &twl_gpio {
> ti,use-leds;
> /* pullups: BIT(1) */
> diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
> --- a/arch/arm/boot/dts/omap3-devkit8000.dts
> +++ b/arch/arm/boot/dts/omap3-devkit8000.dts
> @@ -14,3 +14,36 @@ aliases {
> display2 = &tv0;
> };
> };
> +
> +/* Unusable as clockevent, allow to idle */
> +&timer1_target {
> + /delete-property/ti,no-reset-on-init;
> + /delete-property/ti,no-idle;
> + timer@0 {
> + compatible = "ti,omap3430-timer";
> + interrupts = <37>;
> + };
> +};
> +
> +/* Timer for clocksource, configured without interrupts */
> +&timer12_target {
> + ti,no-reset-on-init;
> + ti,no-idle;
> + timer@0 {
> + compatible = "ti,dmtimer";
> + /delete-property/interrupts;
> + /delete-property/interrupts-extended;
> + /* Always clocked by secure_32k_fck */
> + };
> +};
> +
> +/* Timer for clockevent */
> +&timer2_target {
> + ti,no-reset-on-init;
> + ti,no-idle;
> + timer@0 {
> + compatible = "ti,dmtimer";
> + assigned-clocks = <&gpt2_fck>;
> + assigned-clock-parents = <&sys_ck>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -193,10 +193,23 @@ cm_clockdomains: clockdomains {
> };
> };
>
> - counter32k: counter@48320000 {
> - compatible = "ti,omap-counter32k";
> - reg = <0x48320000 0x20>;
> - ti,hwmods = "counter_32k";
> + target-module@48320000 {
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + reg = <0x48320000 0x4>,
> + <0x48320004 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>;
> + clocks = <&wkup_32k_fck>, <&omap_32ksync_ick>;
> + clock-names = "fck", "ick";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x48320000 0x1000>;
> +
> + counter32k: counter@0 {
> + compatible = "ti,omap-counter32k";
> + reg = <0x0 0x20>;
> + };
> };
>
> intc: interrupt-controller@48200000 {
> @@ -637,19 +650,63 @@ sham: sham@480c3000 {
> dma-names = "rx";
> };
>
> - timer1: timer@48318000 {
> - compatible = "ti,omap3430-timer";
> - reg = <0x48318000 0x400>;
> - interrupts = <37>;
> - ti,hwmods = "timer1";
> - ti,timer-alwon;
> + timer1_target: target-module@48318000 {
> + compatible = "ti,sysc-omap2-timer", "ti,sysc";
> + reg = <0x48318000 0x4>,
> + <0x48318010 0x4>,
> + <0x48318014 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> + SYSC_OMAP2_EMUFREE |
> + SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + ti,syss-mask = <1>;
> + clocks = <&gpt1_fck>, <&gpt1_ick>;
> + clock-names = "fck", "ick";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x48318000 0x1000>;
> +
> + timer1: timer@0 {
> + compatible = "ti,omap3430-timer";
> + reg = <0x0 0x80>;
> + clocks = <&gpt1_fck>;
> + clock-names = "fck";
> + interrupts = <37>;
> + ti,timer-alwon;
> + };
> };
>
> - timer2: timer@49032000 {
> - compatible = "ti,omap3430-timer";
> - reg = <0x49032000 0x400>;
> - interrupts = <38>;
> - ti,hwmods = "timer2";
> + timer2_target: target-module@49032000 {
> + compatible = "ti,sysc-omap2-timer", "ti,sysc";
> + reg = <0x49032000 0x4>,
> + <0x49032010 0x4>,
> + <0x49032014 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> + SYSC_OMAP2_EMUFREE |
> + SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + ti,syss-mask = <1>;
> + clocks = <&gpt2_fck>, <&gpt2_ick>;
> + clock-names = "fck", "ick";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x49032000 0x1000>;
> +
> + timer2: timer@0 {
> + compatible = "ti,omap3430-timer";
> + reg = <0 0x400>;
> + interrupts = <38>;
> + };
> };
>
> timer3: timer@49034000 {
> @@ -723,13 +780,34 @@ timer11: timer@48088000 {
> ti,timer-pwm;
> };
>
> - timer12: timer@48304000 {
> - compatible = "ti,omap3430-timer";
> - reg = <0x48304000 0x400>;
> - interrupts = <95>;
> - ti,hwmods = "timer12";
> - ti,timer-alwon;
> - ti,timer-secure;
> + timer12_target: target-module@48304000 {
> + compatible = "ti,sysc-omap2-timer", "ti,sysc";
> + reg = <0x48304000 0x4>,
> + <0x48304010 0x4>,
> + <0x48304014 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> + SYSC_OMAP2_EMUFREE |
> + SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + ti,syss-mask = <1>;
> + clocks = <&gpt12_fck>, <&gpt12_ick>;
> + clock-names = "fck", "ick";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x48304000 0x1000>;
> +
> + timer12: timer@0 {
> + compatible = "ti,omap3430-timer";
> + reg = <0 0x400>;
> + interrupts = <95>;
> + ti,timer-alwon;
> + ti,timer-secure;
> + };
> };
>
> usbhstll: usbhstll@48062000 {
> @@ -886,4 +964,15 @@ ssi_port2: ssi-port@4805b000 {
> };
> };
>
> -/include/ "omap3xxx-clocks.dtsi"
> +#include "omap3xxx-clocks.dtsi"
> +
> +/* Timer for clockevent */
> +&timer1_target {
> + ti,no-reset-on-init;
> + ti,no-idle;
> + timer@0 {
> + compatible = "ti,dmtimer";
> + assigned-clocks = <&gpt1_fck>;
> + assigned-clock-parents = <&omap_32k_fck>;
> + };
> +};
> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -114,7 +114,7 @@ DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board")
> .init_early = omap3430_init_early,
> .init_machine = omap_generic_init,
> .init_late = omap3_init_late,
> - .init_time = omap_init_time,
> + .init_time = omap_init_time_of,
> .dt_compat = n900_boards_compat,
> .restart = omap3xxx_restart,
> MACHINE_END
> @@ -132,7 +132,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
> .init_early = omap3430_init_early,
> .init_machine = omap_generic_init,
> .init_late = omap3_init_late,
> - .init_time = omap_init_time,
> + .init_time = omap_init_time_of,
> .dt_compat = omap3_boards_compat,
> .restart = omap3xxx_restart,
> MACHINE_END
> @@ -149,7 +149,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
> .init_early = omap3630_init_early,
> .init_machine = omap_generic_init,
> .init_late = omap3_init_late,
> - .init_time = omap_init_time,
> + .init_time = omap_init_time_of,
> .dt_compat = omap36xx_boards_compat,
> .restart = omap3xxx_restart,
> MACHINE_END
> @@ -166,7 +166,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
> .init_early = omap3430_init_early,
> .init_machine = omap_generic_init,
> .init_late = omap3_init_late,
> - .init_time = omap3_secure_sync32k_timer_init,
> + .init_time = omap_init_time_of,
> .dt_compat = omap3_gp_boards_compat,
> .restart = omap3xxx_restart,
> MACHINE_END
> @@ -182,7 +182,7 @@ DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)")
> .init_early = am35xx_init_early,
> .init_machine = omap_generic_init,
> .init_late = omap3_init_late,
> - .init_time = omap3_gptimer_timer_init,
> + .init_time = omap_init_time_of,
> .dt_compat = am3517_boards_compat,
> .restart = omap3xxx_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> @@ -147,36 +147,6 @@ static struct omap_hwmod_class omap3xxx_timer_hwmod_class = {
> .sysc = &omap3xxx_timer_sysc,
> };
>
> -/* timer1 */
> -static struct omap_hwmod omap3xxx_timer1_hwmod = {
> - .name = "timer1",
> - .main_clk = "gpt1_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = WKUP_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT,
> - },
> - },
> - .class = &omap3xxx_timer_hwmod_class,
> - .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> -};
> -
> -/* timer2 */
> -static struct omap_hwmod omap3xxx_timer2_hwmod = {
> - .name = "timer2",
> - .main_clk = "gpt2_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = OMAP3430_PER_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT,
> - },
> - },
> - .class = &omap3xxx_timer_hwmod_class,
> - .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> -};
> -
> /* timer3 */
> static struct omap_hwmod omap3xxx_timer3_hwmod = {
> .name = "timer3",
> @@ -312,21 +282,6 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = {
> .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> };
>
> -/* timer12 */
> -static struct omap_hwmod omap3xxx_timer12_hwmod = {
> - .name = "timer12",
> - .main_clk = "gpt12_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = WKUP_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT,
> - },
> - },
> - .class = &omap3xxx_timer_hwmod_class,
> - .flags = HWMOD_SET_DEFAULT_CLOCKACT,
> -};
> -
> /*
> * 'wd_timer' class
> * 32-bit watchdog upward counter that generates a pulse on the reset pin on
> @@ -1524,38 +1479,6 @@ static struct omap_hwmod omap3xxx_sad2d_hwmod = {
> .class = &omap3xxx_sad2d_class,
> };
>
> -/*
> - * '32K sync counter' class
> - * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
> - */
> -static struct omap_hwmod_class_sysconfig omap3xxx_counter_sysc = {
> - .rev_offs = 0x0000,
> - .sysc_offs = 0x0004,
> - .sysc_flags = SYSC_HAS_SIDLEMODE,
> - .idlemodes = (SIDLE_FORCE | SIDLE_NO),
> - .sysc_fields = &omap_hwmod_sysc_type1,
> -};
> -
> -static struct omap_hwmod_class omap3xxx_counter_hwmod_class = {
> - .name = "counter",
> - .sysc = &omap3xxx_counter_sysc,
> -};
> -
> -static struct omap_hwmod omap3xxx_counter_32k_hwmod = {
> - .name = "counter_32k",
> - .class = &omap3xxx_counter_hwmod_class,
> - .clkdm_name = "wkup_clkdm",
> - .flags = HWMOD_SWSUP_SIDLE,
> - .main_clk = "wkup_32k_fck",
> - .prcm = {
> - .omap2 = {
> - .module_offs = WKUP_MOD,
> - .idlest_reg_id = 1,
> - .idlest_idle_bit = OMAP3430_ST_32KSYNC_SHIFT,
> - },
> - },
> -};
> -
> /*
> * 'gpmc' class
> * general purpose memory controller
> @@ -1868,25 +1791,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l3__iva = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> -
> -/* l4_wkup -> timer1 */
> -static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = {
> - .master = &omap3xxx_l4_wkup_hwmod,
> - .slave = &omap3xxx_timer1_hwmod,
> - .clk = "gpt1_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -
> -/* l4_per -> timer2 */
> -static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = {
> - .master = &omap3xxx_l4_per_hwmod,
> - .slave = &omap3xxx_timer2_hwmod,
> - .clk = "gpt2_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> -
> /* l4_per -> timer3 */
> static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = {
> .master = &omap3xxx_l4_per_hwmod,
> @@ -1965,15 +1869,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> -
> -/* l4_core -> timer12 */
> -static struct omap_hwmod_ocp_if omap3xxx_l4_sec__timer12 = {
> - .master = &omap3xxx_l4_sec_hwmod,
> - .slave = &omap3xxx_timer12_hwmod,
> - .clk = "gpt12_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> /* l4_wkup -> wd_timer2 */
>
> static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = {
> @@ -2325,16 +2220,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__hdq1w = {
> .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
> };
>
> -/* l4_wkup -> 32ksync_counter */
> -
> -
> -static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = {
> - .master = &omap3xxx_l4_wkup_hwmod,
> - .slave = &omap3xxx_counter_32k_hwmod,
> - .clk = "omap_32ksync_ick",
> - .user = OCP_USER_MPU | OCP_USER_SDMA,
> -};
> -
> /* am35xx has Davinci MDIO & EMAC */
> static struct omap_hwmod_class am35xx_mdio_class = {
> .name = "davinci_mdio",
> @@ -2551,8 +2436,6 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
> &omap3_l4_core__i2c2,
> &omap3_l4_core__i2c3,
> &omap3xxx_l4_wkup__l4_sec,
> - &omap3xxx_l4_wkup__timer1,
> - &omap3xxx_l4_per__timer2,
> &omap3xxx_l4_per__timer3,
> &omap3xxx_l4_per__timer4,
> &omap3xxx_l4_per__timer5,
> @@ -2580,27 +2463,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
> &omap34xx_l4_core__mcspi2,
> &omap34xx_l4_core__mcspi3,
> &omap34xx_l4_core__mcspi4,
> - &omap3xxx_l4_wkup__counter_32k,
> &omap3xxx_l3_main__gpmc,
> NULL,
> };
>
> -/* GP-only hwmod links */
> -static struct omap_hwmod_ocp_if *omap34xx_gp_hwmod_ocp_ifs[] __initdata = {
> - &omap3xxx_l4_sec__timer12,
> - NULL,
> -};
> -
> -static struct omap_hwmod_ocp_if *omap36xx_gp_hwmod_ocp_ifs[] __initdata = {
> - &omap3xxx_l4_sec__timer12,
> - NULL,
> -};
> -
> -static struct omap_hwmod_ocp_if *am35xx_gp_hwmod_ocp_ifs[] __initdata = {
> - &omap3xxx_l4_sec__timer12,
> - NULL,
> -};
> -
> /* crypto hwmod links */
> static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = {
> &omap3xxx_l4_core__sham,
> @@ -2774,7 +2640,7 @@ static bool __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus,
> int __init omap3xxx_hwmod_init(void)
> {
> int r;
> - struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL, **h_sham = NULL;
> + struct omap_hwmod_ocp_if **h = NULL, **h_sham = NULL;
> struct omap_hwmod_ocp_if **h_aes = NULL;
> struct device_node *bus;
> unsigned int rev;
> @@ -2797,18 +2663,15 @@ int __init omap3xxx_hwmod_init(void)
> rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 ||
> rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
> h = omap34xx_hwmod_ocp_ifs;
> - h_gp = omap34xx_gp_hwmod_ocp_ifs;
> h_sham = omap34xx_sham_hwmod_ocp_ifs;
> h_aes = omap34xx_aes_hwmod_ocp_ifs;
> } else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) {
> h = am35xx_hwmod_ocp_ifs;
> - h_gp = am35xx_gp_hwmod_ocp_ifs;
> h_sham = am35xx_sham_hwmod_ocp_ifs;
> h_aes = am35xx_aes_hwmod_ocp_ifs;
> } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
> rev == OMAP3630_REV_ES1_2) {
> h = omap36xx_hwmod_ocp_ifs;
> - h_gp = omap36xx_gp_hwmod_ocp_ifs;
> h_sham = omap36xx_sham_hwmod_ocp_ifs;
> h_aes = omap36xx_aes_hwmod_ocp_ifs;
> } else {
> @@ -2820,13 +2683,6 @@ int __init omap3xxx_hwmod_init(void)
> if (r < 0)
> return r;
>
> - /* Register GP-only hwmod links. */
> - if (h_gp && omap_type() == OMAP2_DEVICE_TYPE_GP) {
> - r = omap_hwmod_register_links(h_gp);
> - if (r < 0)
> - return r;
> - }
> -
> /*
> * Register crypto hwmod links only if they are not disabled in DT.
> * If DT information is missing, enable them only for GP devices.
> --
> 2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 12/15] ARM: dts: Configure system timers for ti81xx
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
` (10 preceding siblings ...)
2020-04-29 21:53 ` [PATCH 11/15] ARM: dts: Configure system timers for omap3 Tony Lindgren
@ 2020-04-29 21:53 ` Tony Lindgren
2020-04-29 21:54 ` [PATCH 13/15] ARM: dts: Configure system timers for omap2 Tony Lindgren
` (2 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:53 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, devicetree,
Brian Hutchinson, Graeme Smecher, Keerthy, Lokesh Vutla,
Tero Kristo, H. Nikolaus Schaller, Aaro Koskinen, Adam Ford,
Andreas Kemnade, Michael Turquette, Stephen Boyd, linux-clk
We can now init system timers using the dmtimer and 32k counter
based on only devicetree data and drivers/clocksource timers.
Let's configure the clocksource and clockevent, and drop the old
unused platform data.
As we're just dropping platform data, and the early platform data
init is based on the custom ti,hwmods property, we want to drop
both the platform data and ti,hwmods property in a single patch.
Since the dmtimer can use both 32k clock and system clock as the
source, let's also configure the SoC specific default values. The
board specific dts files can reconfigure these with assigned-clocks
and assigned-clock-parents as needed.
Note that for ti81xx, also timer1 is of type 2 unlike on am335x
where timer1 is type1 while the rest of the timers are type 2.
Cc: devicetree@vger.kernel.org
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/dm814x.dtsi | 78 +++++++++++++++++---
arch/arm/boot/dts/dm816x.dtsi | 82 ++++++++++++++++++----
arch/arm/mach-omap2/board-generic.c | 4 +-
arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 74 -------------------
4 files changed, 138 insertions(+), 100 deletions(-)
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -308,14 +308,30 @@ mcspi4: spi@1a4000 {
ti,hwmods = "mcspi4";
};
- timer1: timer@2e000 {
- compatible = "ti,dm814-timer";
- reg = <0x2e000 0x2000>;
- interrupts = <67>;
- ti,hwmods = "timer1";
- ti,timer-alwon;
+ timer1_target: target-module@2e000 {
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x2e000 0x4>,
+ <0x2e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
clocks = <&timer1_fck>;
clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2e000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,am335x-timer-1ms";
+ reg = <0x0 0x400>;
+ interrupts = <67>;
+ ti,timer-alwon;
+ clocks = <&timer1_fck>;
+ clock-names = "fck";
+ };
};
uart1: uart@20000 {
@@ -348,13 +364,29 @@ uart3: uart@24000 {
dma-names = "tx", "rx";
};
- timer2: timer@40000 {
- compatible = "ti,dm814-timer";
- reg = <0x40000 0x2000>;
- interrupts = <68>;
- ti,hwmods = "timer2";
+ timer2_target: target-module@40000 {
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x40000 0x4>,
+ <0x40010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
clocks = <&timer2_fck>;
clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x40000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,dm814-timer";
+ reg = <0 0x1000>;
+ interrupts = <68>;
+ clocks = <&timer2_fck>;
+ clock-names = "fck";
+ };
};
timer3: timer@42000 {
@@ -735,3 +767,27 @@ gpmc: gpmc@50000000 {
};
#include "dm814x-clocks.dtsi"
+
+/* Timer for clocksource, configured without interrupts */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ /delete-property/interrupts;
+ /delete-property/interrupts-extended;
+ assigned-clocks = <&timer1_fck>;
+ assigned-clock-parents = <&devosc_ck>;
+ };
+};
+
+/* Timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ assigned-clocks = <&timer2_fck>;
+ assigned-clock-parents = <&devosc_ck>;
+ };
+};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -440,23 +440,55 @@ mmc1: mmc@48060000 {
dma-names = "tx", "rx";
};
- timer1: timer@4802e000 {
- compatible = "ti,dm816-timer";
- reg = <0x4802e000 0x2000>;
- interrupts = <67>;
- ti,hwmods = "timer1";
- ti,timer-alwon;
- clocks = <&timer1_fck>;
+ timer1_target: target-module@4802e000 {
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x4802e000 0x4>,
+ <0x4802e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4802e000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,dm816-timer";
+ reg = <0 0x1000>;
+ interrupts = <67>;
+ ti,timer-alwon;
+ clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
+ clock-names = "fck";
+ };
};
- timer2: timer@48040000 {
- compatible = "ti,dm816-timer";
- reg = <0x48040000 0x2000>;
- interrupts = <68>;
- ti,hwmods = "timer2";
- clocks = <&timer2_fck>;
+ timer2_target: target-module@48040000 {
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x48040000 0x4>,
+ <0x48040010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48040000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,dm816-timer";
+ reg = <0 0x1000>;
+ interrupts = <68>;
+ clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ };
};
timer3: timer@48042000 {
@@ -642,3 +674,27 @@ wd_timer2: wd_timer@480c2000 {
};
#include "dm816x-clocks.dtsi"
+
+/* Timer for clocksource, configured without interrupts */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ /delete-property/interrupts;
+ /delete-property/interrupts-extended;
+ assigned-clocks = <&timer1_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
+
+/* Timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ assigned-clocks = <&timer2_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -201,7 +201,7 @@ DT_MACHINE_START(TI814X_DT, "Generic ti814x (Flattened Device Tree)")
.init_early = ti814x_init_early,
.init_machine = omap_generic_init,
.init_late = ti81xx_init_late,
- .init_time = omap3_gptimer_timer_init,
+ .init_time = omap_init_time_of,
.dt_compat = ti814x_boards_compat,
.restart = ti81xx_restart,
MACHINE_END
@@ -218,7 +218,7 @@ DT_MACHINE_START(TI816X_DT, "Generic ti816x (Flattened Device Tree)")
.init_early = ti816x_init_early,
.init_machine = omap_generic_init,
.init_late = ti81xx_init_late,
- .init_time = omap3_gptimer_timer_init,
+ .init_time = omap_init_time_of,
.dt_compat = ti816x_boards_compat,
.restart = ti81xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -690,76 +690,6 @@ static struct omap_hwmod_class dm816x_timer_hwmod_class = {
.sysc = &dm816x_timer_sysc,
};
-static struct omap_hwmod dm814x_timer1_hwmod = {
- .name = "timer1",
- .clkdm_name = "alwon_l3s_clkdm",
- .main_clk = "timer1_fck",
- .class = &dm816x_timer_hwmod_class,
- .flags = HWMOD_NO_IDLEST,
-};
-
-static struct omap_hwmod_ocp_if dm814x_l4_ls__timer1 = {
- .master = &dm81xx_l4_ls_hwmod,
- .slave = &dm814x_timer1_hwmod,
- .clk = "sysclk6_ck",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod dm816x_timer1_hwmod = {
- .name = "timer1",
- .clkdm_name = "alwon_l3s_clkdm",
- .main_clk = "timer1_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DM816X_CM_ALWON_TIMER_1_CLKCTRL,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
- .class = &dm816x_timer_hwmod_class,
-};
-
-static struct omap_hwmod_ocp_if dm816x_l4_ls__timer1 = {
- .master = &dm81xx_l4_ls_hwmod,
- .slave = &dm816x_timer1_hwmod,
- .clk = "sysclk6_ck",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod dm814x_timer2_hwmod = {
- .name = "timer2",
- .clkdm_name = "alwon_l3s_clkdm",
- .main_clk = "timer2_fck",
- .class = &dm816x_timer_hwmod_class,
- .flags = HWMOD_NO_IDLEST,
-};
-
-static struct omap_hwmod_ocp_if dm814x_l4_ls__timer2 = {
- .master = &dm81xx_l4_ls_hwmod,
- .slave = &dm814x_timer2_hwmod,
- .clk = "sysclk6_ck",
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod dm816x_timer2_hwmod = {
- .name = "timer2",
- .clkdm_name = "alwon_l3s_clkdm",
- .main_clk = "timer2_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DM816X_CM_ALWON_TIMER_2_CLKCTRL,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
- .class = &dm816x_timer_hwmod_class,
-};
-
-static struct omap_hwmod_ocp_if dm816x_l4_ls__timer2 = {
- .master = &dm81xx_l4_ls_hwmod,
- .slave = &dm816x_timer2_hwmod,
- .clk = "sysclk6_ck",
- .user = OCP_USER_MPU,
-};
-
static struct omap_hwmod dm816x_timer3_hwmod = {
.name = "timer3",
.clkdm_name = "alwon_l3s_clkdm",
@@ -1288,8 +1218,6 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
&dm814x_l4_ls__mmc1,
&dm814x_l4_ls__mmc2,
&ti81xx_l4_ls__rtc,
- &dm814x_l4_ls__timer1,
- &dm814x_l4_ls__timer2,
&dm81xx_alwon_l3_slow__gpmc,
&dm814x_default_l3_slow__usbss,
&dm814x_alwon_l3_med__mmc3,
@@ -1318,8 +1246,6 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
&dm81xx_l4_ls__elm,
&ti81xx_l4_ls__rtc,
&dm816x_l4_ls__mmc1,
- &dm816x_l4_ls__timer1,
- &dm816x_l4_ls__timer2,
&dm816x_l4_ls__timer3,
&dm816x_l4_ls__timer4,
&dm816x_l4_ls__timer5,
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 13/15] ARM: dts: Configure system timers for omap2
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
` (11 preceding siblings ...)
2020-04-29 21:53 ` [PATCH 12/15] ARM: dts: Configure system timers for ti81xx Tony Lindgren
@ 2020-04-29 21:54 ` Tony Lindgren
2020-04-29 21:54 ` [PATCH 14/15] ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter Tony Lindgren
2020-04-29 21:54 ` [PATCH 15/15] bus: ti-sysc: Timers no longer need legacy quirk handling Tony Lindgren
14 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:54 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, devicetree,
Aaro Koskinen, Keerthy, Lokesh Vutla, Tero Kristo,
H. Nikolaus Schaller, Adam Ford, Andreas Kemnade,
Brian Hutchinson, Graeme Smecher, Michael Turquette,
Stephen Boyd, linux-clk
We can now init system timers using the dmtimer and 32k counter
based on only devicetree data and drivers/clocksource timers.
Let's configure the clocksource and clockevent, and drop the old
unused platform data.
As we're just dropping platform data, and the early platform data
init is based on the custom ti,hwmods property, we want to drop
both the platform data and ti,hwmods property in a single patch.
Since the dmtimer can use both 32k clock and system clock as the
source, let's also configure the SoC specific default values. The
board specific dts files can reconfigure these with assigned-clocks
and assigned-clock-parents as needed.
Let's also update the dts file to use #include while at it.
Cc: devicetree@vger.kernel.org
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/omap2.dtsi | 31 +++++++--
arch/arm/boot/dts/omap2420.dtsi | 69 +++++++++++++++----
arch/arm/boot/dts/omap2430.dtsi | 69 +++++++++++++++----
arch/arm/mach-omap2/board-generic.c | 4 +-
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 20 ------
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 19 -----
.../omap_hwmod_2xxx_interconnect_data.c | 8 ---
.../mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 47 -------------
arch/arm/mach-omap2/omap_hwmod_common_data.h | 3 -
9 files changed, 142 insertions(+), 128 deletions(-)
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -201,11 +201,32 @@ uart3: serial@4806e000 {
clock-frequency = <48000000>;
};
- timer2: timer@4802a000 {
- compatible = "ti,omap2420-timer";
- reg = <0x4802a000 0x400>;
- interrupts = <38>;
- ti,hwmods = "timer2";
+ timer2_target: target-module@4802a000 {
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x4802a000 0x4>,
+ <0x4802a010 0x4>,
+ <0x4802a014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&gpt2_fck>, <&gpt2_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4802a000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,omap2420-timer";
+ reg = <0 0x400>;
+ interrupts = <38>;
+ };
};
timer3: timer@48078000 {
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -68,10 +68,23 @@ scm_clockdomains: clockdomains {
};
};
- counter32k: counter@4000 {
- compatible = "ti,omap-counter32k";
- reg = <0x4000 0x20>;
- ti,hwmods = "counter_32k";
+ target-module@4000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4000 0x4>,
+ <0x4004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ clocks = <&func_32k_ck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+
+ counter32k: counter@0 {
+ compatible = "ti,omap-counter32k";
+ reg = <0 0x20>;
+ };
};
};
@@ -194,12 +207,33 @@ mbox_iva: iva {
};
};
- timer1: timer@48028000 {
- compatible = "ti,omap2420-timer";
- reg = <0x48028000 0x400>;
- interrupts = <37>;
- ti,hwmods = "timer1";
- ti,timer-alwon;
+ timer1_target: target-module@48028000 {
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x48028000 0x4>,
+ <0x48028010 0x4>,
+ <0x48028014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&gpt1_fck>, <&gpt1_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48028000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,omap2420-timer";
+ reg = <0 0x400>;
+ interrupts = <37>;
+ ti,timer-alwon;
+ };
};
wd_timer2: wdt@48022000 {
@@ -218,5 +252,16 @@ &i2c2 {
compatible = "ti,omap2420-i2c";
};
-/include/ "omap24xx-clocks.dtsi"
-/include/ "omap2420-clocks.dtsi"
+#include "omap24xx-clocks.dtsi"
+#include "omap2420-clocks.dtsi"
+
+/* Timer for clockevent */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ assigned-clocks = <&gpt1_fck>;
+ assigned-clock-parents = <&func_32k_ck>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -81,10 +81,23 @@ scm_clockdomains: clockdomains {
};
};
- counter32k: counter@20000 {
- compatible = "ti,omap-counter32k";
- reg = <0x20000 0x20>;
- ti,hwmods = "counter_32k";
+ target-module@20000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x20000 0x4>,
+ <0x20004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ clocks = <&func_32k_ck>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+
+ counter32k: counter@0 {
+ compatible = "ti,omap-counter32k";
+ reg = <0 0x20>;
+ };
};
};
@@ -277,12 +290,33 @@ mbox_dsp: dsp {
};
};
- timer1: timer@49018000 {
- compatible = "ti,omap2420-timer";
- reg = <0x49018000 0x400>;
- interrupts = <37>;
- ti,hwmods = "timer1";
- ti,timer-alwon;
+ timer1_target: target-module@49018000 {
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ reg = <0x49018000 0x4>,
+ <0x49018010 0x4>,
+ <0x49018014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&gpt1_fck>, <&gpt1_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49018000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,omap2420-timer";
+ reg = <0 0x400>;
+ interrupts = <37>;
+ ti,timer-alwon;
+ };
};
mcspi3: spi@480b8000 {
@@ -321,5 +355,16 @@ &i2c2 {
compatible = "ti,omap2430-i2c";
};
-/include/ "omap24xx-clocks.dtsi"
-/include/ "omap2430-clocks.dtsi"
+#include "omap24xx-clocks.dtsi"
+#include "omap2430-clocks.dtsi"
+
+/* Timer for clockevent */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ compatible = "ti,dmtimer";
+ assigned-clocks = <&gpt1_fck>;
+ assigned-clock-parents = <&func_32k_ck>;
+ };
+};
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -50,7 +50,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_machine = omap_generic_init,
- .init_time = omap_init_time,
+ .init_time = omap_init_time_of,
.dt_compat = omap242x_boards_compat,
.restart = omap2xxx_restart,
MACHINE_END
@@ -67,7 +67,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
.map_io = omap243x_map_io,
.init_early = omap2430_init_early,
.init_machine = omap_generic_init,
- .init_time = omap_init_time,
+ .init_time = omap_init_time_of,
.dt_compat = omap243x_boards_compat,
.restart = omap2xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -264,14 +264,6 @@ static struct omap_hwmod_ocp_if omap2420_l3__dsp = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_timer1_hwmod,
- .clk = "gpt1_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_wkup -> wd_timer2 */
static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = {
.master = &omap2xxx_l4_wkup_hwmod,
@@ -352,15 +344,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__hdq1w = {
.flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
};
-
-/* l4_wkup -> 32ksync_counter */
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_counter_32k_hwmod,
- .clk = "sync_32k_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
static struct omap_hwmod_ocp_if omap2420_l3__gpmc = {
.master = &omap2xxx_l3_main_hwmod,
.slave = &omap2xxx_gpmc_hwmod,
@@ -382,8 +365,6 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
&omap2420_l4_core__i2c2,
&omap2420_l3__iva,
&omap2420_l3__dsp,
- &omap2420_l4_wkup__timer1,
- &omap2xxx_l4_core__timer2,
&omap2xxx_l4_core__timer3,
&omap2xxx_l4_core__timer4,
&omap2xxx_l4_core__timer5,
@@ -411,7 +392,6 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
&omap2xxx_l4_core__sham,
&omap2xxx_l4_core__aes,
&omap2420_l4_core__hdq1w,
- &omap2420_l4_wkup__counter_32k,
&omap2420_l3__gpmc,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -436,14 +436,6 @@ static struct omap_hwmod_ocp_if omap2430_l3__iva = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__timer1 = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_timer1_hwmod,
- .clk = "gpt1_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_wkup -> wd_timer2 */
static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = {
.master = &omap2xxx_l4_wkup_hwmod,
@@ -548,14 +540,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__hdq1w = {
.flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
};
-/* l4_wkup -> 32ksync_counter */
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__counter_32k = {
- .master = &omap2xxx_l4_wkup_hwmod,
- .slave = &omap2xxx_counter_32k_hwmod,
- .clk = "sync_32k_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
static struct omap_hwmod_ocp_if omap2430_l3__gpmc = {
.master = &omap2xxx_l3_main_hwmod,
.slave = &omap2xxx_gpmc_hwmod,
@@ -581,8 +565,6 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
&omap2xxx_l4_core__mcspi2,
&omap2430_l4_core__mcspi3,
&omap2430_l3__iva,
- &omap2430_l4_wkup__timer1,
- &omap2xxx_l4_core__timer2,
&omap2xxx_l4_core__timer3,
&omap2xxx_l4_core__timer4,
&omap2xxx_l4_core__timer5,
@@ -613,7 +595,6 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
&omap2xxx_l4_core__rng,
&omap2xxx_l4_core__sham,
&omap2xxx_l4_core__aes,
- &omap2430_l4_wkup__counter_32k,
&omap2430_l3__gpmc,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -95,14 +95,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4_core -> timer2 */
-struct omap_hwmod_ocp_if omap2xxx_l4_core__timer2 = {
- .master = &omap2xxx_l4_core_hwmod,
- .slave = &omap2xxx_timer2_hwmod,
- .clk = "gpt2_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_core -> timer3 */
struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3 = {
.master = &omap2xxx_l4_core_hwmod,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -195,36 +195,6 @@ struct omap_hwmod omap2xxx_iva_hwmod = {
.class = &iva_hwmod_class,
};
-/* timer1 */
-struct omap_hwmod omap2xxx_timer1_hwmod = {
- .name = "timer1",
- .main_clk = "gpt1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
- },
- },
- .class = &omap2xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-/* timer2 */
-struct omap_hwmod omap2xxx_timer2_hwmod = {
- .name = "timer2",
- .main_clk = "gpt2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
- },
- },
- .class = &omap2xxx_timer_hwmod_class,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
/* timer3 */
struct omap_hwmod omap2xxx_timer3_hwmod = {
.name = "timer3",
@@ -595,23 +565,6 @@ struct omap_hwmod omap2xxx_mcspi2_hwmod = {
.class = &omap2xxx_mcspi_class,
};
-static struct omap_hwmod_class omap2xxx_counter_hwmod_class = {
- .name = "counter",
-};
-
-struct omap_hwmod omap2xxx_counter_32k_hwmod = {
- .name = "counter_32k",
- .main_clk = "func_32k_ck",
- .prcm = {
- .omap2 = {
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_32KSYNC_SHIFT,
- },
- },
- .class = &omap2xxx_counter_hwmod_class,
-};
-
/* gpmc */
struct omap_hwmod omap2xxx_gpmc_hwmod = {
.name = "gpmc",
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -21,8 +21,6 @@ extern struct omap_hwmod omap2xxx_l4_core_hwmod;
extern struct omap_hwmod omap2xxx_l4_wkup_hwmod;
extern struct omap_hwmod omap2xxx_mpu_hwmod;
extern struct omap_hwmod omap2xxx_iva_hwmod;
-extern struct omap_hwmod omap2xxx_timer1_hwmod;
-extern struct omap_hwmod omap2xxx_timer2_hwmod;
extern struct omap_hwmod omap2xxx_timer3_hwmod;
extern struct omap_hwmod omap2xxx_timer4_hwmod;
extern struct omap_hwmod omap2xxx_timer5_hwmod;
@@ -47,7 +45,6 @@ extern struct omap_hwmod omap2xxx_gpio3_hwmod;
extern struct omap_hwmod omap2xxx_gpio4_hwmod;
extern struct omap_hwmod omap2xxx_mcspi1_hwmod;
extern struct omap_hwmod omap2xxx_mcspi2_hwmod;
-extern struct omap_hwmod omap2xxx_counter_32k_hwmod;
extern struct omap_hwmod omap2xxx_gpmc_hwmod;
extern struct omap_hwmod omap2xxx_rng_hwmod;
extern struct omap_hwmod omap2xxx_sham_hwmod;
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 14/15] ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
` (12 preceding siblings ...)
2020-04-29 21:54 ` [PATCH 13/15] ARM: dts: Configure system timers for omap2 Tony Lindgren
@ 2020-04-29 21:54 ` Tony Lindgren
2020-04-29 21:54 ` [PATCH 15/15] bus: ti-sysc: Timers no longer need legacy quirk handling Tony Lindgren
14 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:54 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, Keerthy,
Lokesh Vutla, Tero Kristo, H. Nikolaus Schaller, Aaro Koskinen,
Adam Ford, Andreas Kemnade, Brian Hutchinson, Graeme Smecher,
Michael Turquette, Stephen Boyd, devicetree, linux-clk
With dmtimer and 32k counter being initialized based on devicetree data,
we can just drop the old timer code.
This still leaves the omap5 and dra7 realtime_counter_init() that
depend on the smc calls and control module platform code for the dra7
quirk init.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Makefile | 4 +-
arch/arm/mach-omap2/common.h | 7 +
arch/arm/mach-omap2/timer.c | 551 -----------------------------------
3 files changed, 10 insertions(+), 552 deletions(-)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -7,7 +7,7 @@ ccflags-y := -I$(srctree)/$(src)/include \
-I$(srctree)/arch/arm/plat-omap/include
# Common support
-obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \
+obj-y := id.o io.o control.o devices.o fb.o pm.o \
common.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
omap_device.o omap-headsmp.o sram.o
@@ -16,6 +16,8 @@ hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
clock-common = clock.o
secure-common = omap-smc.o omap-secure.o
+obj-$(CONFIG_SOC_HAS_REALTIME_COUNTER) += timer.o
+
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -111,7 +111,14 @@ static inline int omap_l2_cache_init(void)
#define OMAP_L2C_AUX_CTRL 0
#define omap4_l2c310_write_sec NULL
#endif
+
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
extern void omap5_realtime_timer_init(void);
+#else
+static inline void omap5_realtime_timer_init(void)
+{
+}
+#endif
void omap2420_init_early(void);
void omap2430_init_early(void);
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -26,34 +26,12 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/dmtimer-omap.h>
-#include <linux/sched_clock.h>
-
-#include <asm/mach/time.h>
-
-#include "omap_hwmod.h"
-#include "omap_device.h"
-#include <plat/counter-32k.h>
-#include <clocksource/timer-ti-dm.h>
#include "soc.h"
#include "common.h"
#include "control.h"
-#include "powerdomain.h"
#include "omap-secure.h"
#define REALTIME_COUNTER_BASE 0x48243200
@@ -61,294 +39,12 @@
#define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14
#define NUMERATOR_DENUMERATOR_MASK 0xfffff000
-/* Clockevent code */
-
-static struct omap_dm_timer clkev;
-static struct clock_event_device clockevent_gpt;
-
-/* Clockevent hwmod for am335x and am437x suspend */
-static struct omap_hwmod *clockevent_gpt_hwmod;
-
-/* Clockesource hwmod for am437x suspend */
-static struct omap_hwmod *clocksource_gpt_hwmod;
-
-#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
static unsigned long arch_timer_freq;
void set_cntfreq(void)
{
omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq);
}
-#endif
-
-static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &clockevent_gpt;
-
- __omap_dm_timer_write_status(&clkev, OMAP_TIMER_INT_OVERFLOW);
-
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static int omap2_gp_timer_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST,
- 0xffffffff - cycles, OMAP_TIMER_POSTED);
-
- return 0;
-}
-
-static int omap2_gp_timer_shutdown(struct clock_event_device *evt)
-{
- __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate);
- return 0;
-}
-
-static int omap2_gp_timer_set_periodic(struct clock_event_device *evt)
-{
- u32 period;
-
- __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate);
-
- period = clkev.rate / HZ;
- period -= 1;
- /* Looks like we need to first set the load value separately */
- __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, 0xffffffff - period,
- OMAP_TIMER_POSTED);
- __omap_dm_timer_load_start(&clkev,
- OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
- 0xffffffff - period, OMAP_TIMER_POSTED);
- return 0;
-}
-
-static void omap_clkevt_idle(struct clock_event_device *unused)
-{
- if (!clockevent_gpt_hwmod)
- return;
-
- omap_hwmod_idle(clockevent_gpt_hwmod);
-}
-
-static void omap_clkevt_unidle(struct clock_event_device *unused)
-{
- if (!clockevent_gpt_hwmod)
- return;
-
- omap_hwmod_enable(clockevent_gpt_hwmod);
- __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
-}
-
-static struct clock_event_device clockevent_gpt = {
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .rating = 300,
- .set_next_event = omap2_gp_timer_set_next_event,
- .set_state_shutdown = omap2_gp_timer_shutdown,
- .set_state_periodic = omap2_gp_timer_set_periodic,
- .set_state_oneshot = omap2_gp_timer_shutdown,
- .tick_resume = omap2_gp_timer_shutdown,
-};
-
-static const struct of_device_id omap_timer_match[] __initconst = {
- { .compatible = "ti,omap2420-timer", },
- { .compatible = "ti,omap3430-timer", },
- { .compatible = "ti,omap4430-timer", },
- { .compatible = "ti,omap5430-timer", },
- { .compatible = "ti,dm814-timer", },
- { .compatible = "ti,dm816-timer", },
- { .compatible = "ti,am335x-timer", },
- { .compatible = "ti,am335x-timer-1ms", },
- { }
-};
-
-static int omap_timer_add_disabled_property(struct device_node *np)
-{
- struct property *prop;
-
- prop = kzalloc(sizeof(*prop), GFP_KERNEL);
- if (!prop)
- return -ENOMEM;
-
- prop->name = "status";
- prop->value = "disabled";
- prop->length = strlen(prop->value);
-
- return of_add_property(np, prop);
-}
-
-static int omap_timer_update_dt(struct device_node *np)
-{
- int error = 0;
-
- if (!of_device_is_compatible(np, "ti,omap-counter32k")) {
- error = omap_timer_add_disabled_property(np);
- if (error)
- return error;
- }
-
- /* No parent interconnect target module configured? */
- if (of_get_property(np, "ti,hwmods", NULL))
- return error;
-
- /* Tag parent interconnect target module disabled */
- error = omap_timer_add_disabled_property(np->parent);
- if (error)
- return error;
-
- return 0;
-}
-
-/**
- * omap_get_timer_dt - get a timer using device-tree
- * @match - device-tree match structure for matching a device type
- * @property - optional timer property to match
- *
- * Helper function to get a timer during early boot using device-tree for use
- * as kernel system timer. Optionally, the property argument can be used to
- * select a timer with a specific property. Once a timer is found then mark
- * the timer node in device-tree as disabled, to prevent the kernel from
- * registering this timer as a platform device and so no one else can use it.
- */
-static struct device_node * __init omap_get_timer_dt(const struct of_device_id *match,
- const char *property)
-{
- struct device_node *np;
- int error;
-
- for_each_matching_node(np, match) {
- if (!of_device_is_available(np))
- continue;
-
- if (property && !of_get_property(np, property, NULL))
- continue;
-
- if (!property && (of_get_property(np, "ti,timer-alwon", NULL) ||
- of_get_property(np, "ti,timer-dsp", NULL) ||
- of_get_property(np, "ti,timer-pwm", NULL) ||
- of_get_property(np, "ti,timer-secure", NULL)))
- continue;
-
- error = omap_timer_update_dt(np);
- WARN(error, "%s: Could not update dt: %i\n", __func__, error);
-
- return np;
- }
-
- return NULL;
-}
-
-/**
- * omap_dmtimer_init - initialisation function when device tree is used
- *
- * For secure OMAP3/DRA7xx devices, timers with device type "timer-secure"
- * cannot be used by the kernel as they are reserved. Therefore, to prevent the
- * kernel registering these devices remove them dynamically from the device
- * tree on boot.
- */
-static void __init omap_dmtimer_init(void)
-{
- struct device_node *np;
-
- if (!cpu_is_omap34xx() && !soc_is_dra7xx())
- return;
-
- /* If we are a secure device, remove any secure timer nodes */
- if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) {
- np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure");
- of_node_put(np);
- }
-}
-
-/**
- * omap_dm_timer_get_errata - get errata flags for a timer
- *
- * Get the timer errata flags that are specific to the OMAP device being used.
- */
-static u32 __init omap_dm_timer_get_errata(void)
-{
- if (cpu_is_omap24xx())
- return 0;
-
- return OMAP_TIMER_ERRATA_I103_I767;
-}
-
-static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
- const char *fck_source,
- const char *property,
- const char **timer_name,
- int posted)
-{
- const char *oh_name = NULL;
- struct device_node *np;
- struct omap_hwmod *oh;
- struct clk *src;
- int r = 0;
-
- np = omap_get_timer_dt(omap_timer_match, property);
- if (!np)
- return -ENODEV;
-
- of_property_read_string_index(np, "ti,hwmods", 0, &oh_name);
- if (!oh_name) {
- of_property_read_string_index(np->parent, "ti,hwmods", 0,
- &oh_name);
- if (!oh_name)
- return -ENODEV;
- }
-
- timer->irq = irq_of_parse_and_map(np, 0);
- if (!timer->irq)
- return -ENXIO;
-
- timer->io_base = of_iomap(np, 0);
-
- timer->fclk = of_clk_get_by_name(np, "fck");
-
- of_node_put(np);
-
- oh = omap_hwmod_lookup(oh_name);
- if (!oh)
- return -ENODEV;
-
- *timer_name = oh->name;
-
- if (!timer->io_base)
- return -ENXIO;
-
- omap_hwmod_setup_one(oh_name);
-
- /* After the dmtimer is using hwmod these clocks won't be needed */
- if (IS_ERR_OR_NULL(timer->fclk))
- timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
- if (IS_ERR(timer->fclk))
- return PTR_ERR(timer->fclk);
-
- src = clk_get(NULL, fck_source);
- if (IS_ERR(src))
- return PTR_ERR(src);
-
- WARN(clk_set_parent(timer->fclk, src) < 0,
- "Cannot set timer parent clock, no PLL clock driver?");
-
- clk_put(src);
-
- omap_hwmod_enable(oh);
- __omap_dm_timer_init_regs(timer);
-
- if (posted)
- __omap_dm_timer_enable_posted(timer);
-
- /* Check that the intended posted configuration matches the actual */
- if (posted != timer->posted)
- return -EINVAL;
-
- timer->rate = clk_get_rate(timer->fclk);
- timer->reserved = 1;
-
- return r;
-}
#if !defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
void tick_broadcast(const struct cpumask *mask)
@@ -356,226 +52,6 @@ void tick_broadcast(const struct cpumask *mask)
}
#endif
-static void __init omap2_gp_clockevent_init(int gptimer_id,
- const char *fck_source,
- const char *property)
-{
- int res;
-
- clkev.id = gptimer_id;
- clkev.errata = omap_dm_timer_get_errata();
-
- /*
- * For clock-event timers we never read the timer counter and
- * so we are not impacted by errata i103 and i767. Therefore,
- * we can safely ignore this errata for clock-event timers.
- */
- __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767);
-
- res = omap_dm_timer_init_one(&clkev, fck_source, property,
- &clockevent_gpt.name, OMAP_TIMER_POSTED);
- BUG_ON(res);
-
- if (request_irq(clkev.irq, omap2_gp_timer_interrupt,
- IRQF_TIMER | IRQF_IRQPOLL, "gp_timer", &clkev))
- pr_err("Failed to request irq %d (gp_timer)\n", clkev.irq);
-
- __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
-
- clockevent_gpt.cpumask = cpu_possible_mask;
- clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev);
- clockevents_config_and_register(&clockevent_gpt, clkev.rate,
- 3, /* Timer internal resynch latency */
- 0xffffffff);
-
- if (soc_is_am33xx() || soc_is_am43xx()) {
- clockevent_gpt.suspend = omap_clkevt_idle;
- clockevent_gpt.resume = omap_clkevt_unidle;
-
- clockevent_gpt_hwmod =
- omap_hwmod_lookup(clockevent_gpt.name);
- }
-
- pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name,
- clkev.rate);
-}
-
-/* Clocksource code */
-static struct omap_dm_timer clksrc;
-static bool use_gptimer_clksrc __initdata;
-
-/*
- * clocksource
- */
-static u64 clocksource_read_cycles(struct clocksource *cs)
-{
- return (u64)__omap_dm_timer_read_counter(&clksrc,
- OMAP_TIMER_NONPOSTED);
-}
-
-static struct clocksource clocksource_gpt = {
- .rating = 300,
- .read = clocksource_read_cycles,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static u64 notrace dmtimer_read_sched_clock(void)
-{
- if (clksrc.reserved)
- return __omap_dm_timer_read_counter(&clksrc,
- OMAP_TIMER_NONPOSTED);
-
- return 0;
-}
-
-static const struct of_device_id omap_counter_match[] __initconst = {
- { .compatible = "ti,omap-counter32k", },
- { }
-};
-
-/* Setup free-running counter for clocksource */
-static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
-{
- int ret;
- struct device_node *np = NULL;
- struct omap_hwmod *oh;
- const char *oh_name = "counter_32k";
-
- /*
- * See if the 32kHz counter is supported.
- */
- np = omap_get_timer_dt(omap_counter_match, NULL);
- if (!np)
- return -ENODEV;
-
- of_property_read_string_index(np->parent, "ti,hwmods", 0, &oh_name);
- if (!oh_name) {
- of_property_read_string_index(np, "ti,hwmods", 0, &oh_name);
- if (!oh_name)
- return -ENODEV;
- }
-
- /*
- * First check hwmod data is available for sync32k counter
- */
- oh = omap_hwmod_lookup(oh_name);
- if (!oh || oh->slaves_cnt == 0)
- return -ENODEV;
-
- omap_hwmod_setup_one(oh_name);
-
- ret = omap_hwmod_enable(oh);
- if (ret) {
- pr_warn("%s: failed to enable counter_32k module (%d)\n",
- __func__, ret);
- return ret;
- }
-
- return ret;
-}
-
-static unsigned int omap2_gptimer_clksrc_load;
-
-static void omap2_gptimer_clksrc_suspend(struct clocksource *unused)
-{
- omap2_gptimer_clksrc_load =
- __omap_dm_timer_read_counter(&clksrc, OMAP_TIMER_NONPOSTED);
-
- omap_hwmod_idle(clocksource_gpt_hwmod);
-}
-
-static void omap2_gptimer_clksrc_resume(struct clocksource *unused)
-{
- omap_hwmod_enable(clocksource_gpt_hwmod);
-
- __omap_dm_timer_load_start(&clksrc,
- OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR,
- omap2_gptimer_clksrc_load,
- OMAP_TIMER_NONPOSTED);
-}
-
-static void __init omap2_gptimer_clocksource_init(int gptimer_id,
- const char *fck_source,
- const char *property)
-{
- int res;
-
- clksrc.id = gptimer_id;
- clksrc.errata = omap_dm_timer_get_errata();
-
- res = omap_dm_timer_init_one(&clksrc, fck_source, property,
- &clocksource_gpt.name,
- OMAP_TIMER_NONPOSTED);
-
- if (soc_is_am43xx()) {
- clocksource_gpt.suspend = omap2_gptimer_clksrc_suspend;
- clocksource_gpt.resume = omap2_gptimer_clksrc_resume;
-
- clocksource_gpt_hwmod =
- omap_hwmod_lookup(clocksource_gpt.name);
- }
-
- BUG_ON(res);
-
- __omap_dm_timer_load_start(&clksrc,
- OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0,
- OMAP_TIMER_NONPOSTED);
- sched_clock_register(dmtimer_read_sched_clock, 32, clksrc.rate);
-
- if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
- pr_err("Could not register clocksource %s\n",
- clocksource_gpt.name);
- else
- pr_info("OMAP clocksource: %s at %lu Hz\n",
- clocksource_gpt.name, clksrc.rate);
-}
-
-static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src,
- const char *clkev_prop, int clksrc_nr, const char *clksrc_src,
- const char *clksrc_prop, bool gptimer)
-{
- omap_clk_init();
- omap_dmtimer_init();
- omap2_gp_clockevent_init(clkev_nr, clkev_src, clkev_prop);
-
- /* Enable the use of clocksource="gp_timer" kernel parameter */
- if (clksrc_nr && (use_gptimer_clksrc || gptimer))
- omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src,
- clksrc_prop);
- else
- omap2_sync32k_clocksource_init();
-}
-
-void __init omap_init_time(void)
-{
- __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
- 2, "timer_sys_ck", NULL, false);
-
- timer_probe();
-}
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
-void __init omap3_secure_sync32k_timer_init(void)
-{
- __omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure",
- 2, "timer_sys_ck", NULL, false);
-
- timer_probe();
-}
-#endif /* CONFIG_ARCH_OMAP3 */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
- defined(CONFIG_SOC_AM43XX)
-void __init omap3_gptimer_timer_init(void)
-{
- __omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
- 1, "timer_sys_ck", "ti,timer-alwon", true);
- if (of_have_populated_dt())
- timer_probe();
-}
-#endif
-
#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
/*
@@ -589,7 +65,6 @@ void __init omap3_gptimer_timer_init(void)
*/
static void __init realtime_counter_init(void)
{
-#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
void __iomem *base;
static struct clk *sys_clk;
unsigned long rate;
@@ -688,7 +163,6 @@ static void __init realtime_counter_init(void)
set_cntfreq();
iounmap(base);
-#endif
}
void __init omap5_realtime_timer_init(void)
@@ -699,28 +173,3 @@ void __init omap5_realtime_timer_init(void)
timer_probe();
}
#endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */
-
-/**
- * omap2_override_clocksource - clocksource override with user configuration
- *
- * Allows user to override default clocksource, using kernel parameter
- * clocksource="gp_timer" (For all OMAP2PLUS architectures)
- *
- * Note that, here we are using same standard kernel parameter "clocksource=",
- * and not introducing any OMAP specific interface.
- */
-static int __init omap2_override_clocksource(char *str)
-{
- if (!str)
- return 0;
- /*
- * For OMAP architecture, we only have two options
- * - sync_32k (default)
- * - gp_timer (sys_clk based)
- */
- if (!strcmp(str, "gp_timer"))
- use_gptimer_clksrc = true;
-
- return 0;
-}
-early_param("clocksource", omap2_override_clocksource);
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 15/15] bus: ti-sysc: Timers no longer need legacy quirk handling
2020-04-29 21:53 [PATCHv2 00/15] Update omaps to use drivers/clocksource timers Tony Lindgren
` (13 preceding siblings ...)
2020-04-29 21:54 ` [PATCH 14/15] ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter Tony Lindgren
@ 2020-04-29 21:54 ` Tony Lindgren
14 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2020-04-29 21:54 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner
Cc: linux-kernel, linux-omap, linux-arm-kernel, Keerthy,
Lokesh Vutla, Tero Kristo, H. Nikolaus Schaller, Aaro Koskinen,
Adam Ford, Andreas Kemnade, Brian Hutchinson, Graeme Smecher,
Michael Turquette, Stephen Boyd, devicetree, linux-clk
As timers no longer need legacy quirk handling, let's move them to
the CONFIG_DEBUG section to make it easier to see which drivers still
need more work.
Let's also add detection for few more older timer revisions while at
it as that makes CONFIG_DEBUG output easier to read with proper names.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/bus/ti-sysc.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1275,13 +1275,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("smartreflex", 0, -ENODEV, 0x38, -ENODEV, 0x00000000, 0xffffffff,
SYSC_QUIRK_LEGACY_IDLE),
- SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000015, 0xffffffff,
- 0),
- /* Some timers on omap4 and later */
- SYSC_QUIRK("timer", 0, 0, 0x10, -ENODEV, 0x50002100, 0xffffffff,
- 0),
- SYSC_QUIRK("timer", 0, 0, 0x10, -ENODEV, 0x4fff1301, 0xffff00ff,
- 0),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000046, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
@@ -1404,6 +1397,13 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("slimbus", 0, 0, 0x10, -ENODEV, 0x40002903, 0xffffffff, 0),
SYSC_QUIRK("spinlock", 0, 0, 0x10, -ENODEV, 0x50020000, 0xffffffff, 0),
SYSC_QUIRK("rng", 0, 0x1fe0, 0x1fe4, -ENODEV, 0x00000020, 0xffffffff, 0),
+ SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000013, 0xffffffff, 0),
+ SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000015, 0xffffffff, 0),
+ /* Some timers on omap4 and later */
+ SYSC_QUIRK("timer", 0, 0, 0x10, -ENODEV, 0x50002100, 0xffffffff, 0),
+ SYSC_QUIRK("timer", 0, 0, 0x10, -ENODEV, 0x4fff1301, 0xffff00ff, 0),
+ SYSC_QUIRK("timer32k", 0, 0, 0x4, -ENODEV, 0x00000040, 0xffffffff, 0),
+ SYSC_QUIRK("timer32k", 0, 0, 0x4, -ENODEV, 0x00000011, 0xffffffff, 0),
SYSC_QUIRK("timer32k", 0, 0, 0x4, -ENODEV, 0x00000060, 0xffffffff, 0),
SYSC_QUIRK("tpcc", 0, 0, -ENODEV, -ENODEV, 0x40014c00, 0xffffffff, 0),
SYSC_QUIRK("usbhstll", 0, 0, 0x10, 0x14, 0x00000004, 0xffffffff, 0),
--
2.26.2
^ permalink raw reply [flat|nested] 19+ messages in thread