From: Tero Kristo <t-kristo@ti.com>
To: <linux-clk@vger.kernel.org>, <sboyd@kernel.org>,
<mturquette@baylibre.com>
Cc: <tony@atomide.com>, <linux-omap@vger.kernel.org>
Subject: [PATCH] clk: ti: clkctrl: convert subclocks to use proper names also
Date: Thu, 30 Apr 2020 11:34:51 +0300 [thread overview]
Message-ID: <20200430083451.8562-1-t-kristo@ti.com> (raw)
Addition of the new internal API to get the clkctrl names missed adding
the same conversion in place for the subclocks. This leads into missed
parent/child relationships (i.e. orphaned clocks) with mixed node name
handling, for example with omap4/omap5 where the l4_per clocks are using
new naming, but rest are using old. Fix by converting the subclock
registration to pick correct names for the clocks also.
Fixes: 6c3090520554 ("clk: ti: clkctrl: Fix hidden dependency to node name")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/clk/ti/clkctrl.c | 98 ++++++++++++++++++++--------------------
1 file changed, 48 insertions(+), 50 deletions(-)
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 9019624e37bc..864c484bde1b 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -255,24 +255,53 @@ static struct clk_hw *_ti_omap4_clkctrl_xlate(struct of_phandle_args *clkspec,
return entry->clk;
}
+/* Get clkctrl clock base name based on clkctrl_name or dts node */
+static const char * __init clkctrl_get_clock_name(struct device_node *np,
+ const char *clkctrl_name,
+ int offset, int index,
+ bool legacy_naming)
+{
+ char *clock_name;
+
+ /* l4per-clkctrl:1234:0 style naming based on clkctrl_name */
+ if (clkctrl_name && !legacy_naming) {
+ clock_name = kasprintf(GFP_KERNEL, "%s-clkctrl:%04x:%d",
+ clkctrl_name, offset, index);
+ strreplace(clock_name, '_', '-');
+
+ return clock_name;
+ }
+
+ /* l4per:1234:0 old style naming based on clkctrl_name */
+ if (clkctrl_name)
+ return kasprintf(GFP_KERNEL, "%s_cm:clk:%04x:%d",
+ clkctrl_name, offset, index);
+
+ /* l4per_cm:1234:0 old style naming based on parent node name */
+ if (legacy_naming)
+ return kasprintf(GFP_KERNEL, "%pOFn:clk:%04x:%d",
+ np->parent, offset, index);
+
+ /* l4per-clkctrl:1234:0 style naming based on node name */
+ return kasprintf(GFP_KERNEL, "%pOFn:%04x:%d", np, offset, index);
+}
+
static int __init
_ti_clkctrl_clk_register(struct omap_clkctrl_provider *provider,
struct device_node *node, struct clk_hw *clk_hw,
u16 offset, u8 bit, const char * const *parents,
- int num_parents, const struct clk_ops *ops)
+ int num_parents, const struct clk_ops *ops,
+ const char *clkctrl_name)
{
struct clk_init_data init = { NULL };
struct clk *clk;
struct omap_clkctrl_clk *clkctrl_clk;
int ret = 0;
- if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
- init.name = kasprintf(GFP_KERNEL, "%pOFn:%pOFn:%04x:%d",
- node->parent, node, offset,
- bit);
- else
- init.name = kasprintf(GFP_KERNEL, "%pOFn:%04x:%d", node,
- offset, bit);
+ init.name = clkctrl_get_clock_name(node, clkctrl_name, offset, bit,
+ ti_clk_get_features()->flags &
+ TI_CLK_CLKCTRL_COMPAT);
+
clkctrl_clk = kzalloc(sizeof(*clkctrl_clk), GFP_KERNEL);
if (!init.name || !clkctrl_clk) {
ret = -ENOMEM;
@@ -309,7 +338,7 @@ static void __init
_ti_clkctrl_setup_gate(struct omap_clkctrl_provider *provider,
struct device_node *node, u16 offset,
const struct omap_clkctrl_bit_data *data,
- void __iomem *reg)
+ void __iomem *reg, const char *clkctrl_name)
{
struct clk_hw_omap *clk_hw;
@@ -322,7 +351,7 @@ _ti_clkctrl_setup_gate(struct omap_clkctrl_provider *provider,
if (_ti_clkctrl_clk_register(provider, node, &clk_hw->hw, offset,
data->bit, data->parents, 1,
- &omap_gate_clk_ops))
+ &omap_gate_clk_ops, clkctrl_name))
kfree(clk_hw);
}
@@ -330,7 +359,7 @@ static void __init
_ti_clkctrl_setup_mux(struct omap_clkctrl_provider *provider,
struct device_node *node, u16 offset,
const struct omap_clkctrl_bit_data *data,
- void __iomem *reg)
+ void __iomem *reg, const char *clkctrl_name)
{
struct clk_omap_mux *mux;
int num_parents = 0;
@@ -357,7 +386,7 @@ _ti_clkctrl_setup_mux(struct omap_clkctrl_provider *provider,
if (_ti_clkctrl_clk_register(provider, node, &mux->hw, offset,
data->bit, data->parents, num_parents,
- &ti_clk_mux_ops))
+ &ti_clk_mux_ops, clkctrl_name))
kfree(mux);
}
@@ -365,7 +394,7 @@ static void __init
_ti_clkctrl_setup_div(struct omap_clkctrl_provider *provider,
struct device_node *node, u16 offset,
const struct omap_clkctrl_bit_data *data,
- void __iomem *reg)
+ void __iomem *reg, const char *clkctrl_name)
{
struct clk_omap_divider *div;
const struct omap_clkctrl_div_data *div_data = data->data;
@@ -393,7 +422,7 @@ _ti_clkctrl_setup_div(struct omap_clkctrl_provider *provider,
if (_ti_clkctrl_clk_register(provider, node, &div->hw, offset,
data->bit, data->parents, 1,
- &ti_clk_divider_ops))
+ &ti_clk_divider_ops, clkctrl_name))
kfree(div);
}
@@ -401,7 +430,7 @@ static void __init
_ti_clkctrl_setup_subclks(struct omap_clkctrl_provider *provider,
struct device_node *node,
const struct omap_clkctrl_reg_data *data,
- void __iomem *reg)
+ void __iomem *reg, const char *clkctrl_name)
{
const struct omap_clkctrl_bit_data *bits = data->bit_data;
@@ -412,17 +441,17 @@ _ti_clkctrl_setup_subclks(struct omap_clkctrl_provider *provider,
switch (bits->type) {
case TI_CLK_GATE:
_ti_clkctrl_setup_gate(provider, node, data->offset,
- bits, reg);
+ bits, reg, clkctrl_name);
break;
case TI_CLK_DIVIDER:
_ti_clkctrl_setup_div(provider, node, data->offset,
- bits, reg);
+ bits, reg, clkctrl_name);
break;
case TI_CLK_MUX:
_ti_clkctrl_setup_mux(provider, node, data->offset,
- bits, reg);
+ bits, reg, clkctrl_name);
break;
default:
@@ -465,37 +494,6 @@ static char * __init clkctrl_get_name(struct device_node *np)
return NULL;
}
-/* Get clkctrl clock base name based on clkctrl_name or dts node */
-static const char * __init clkctrl_get_clock_name(struct device_node *np,
- const char *clkctrl_name,
- int offset, int index,
- bool legacy_naming)
-{
- char *clock_name;
-
- /* l4per-clkctrl:1234:0 style naming based on clkctrl_name */
- if (clkctrl_name && !legacy_naming) {
- clock_name = kasprintf(GFP_KERNEL, "%s-clkctrl:%04x:%d",
- clkctrl_name, offset, index);
- strreplace(clock_name, '_', '-');
-
- return clock_name;
- }
-
- /* l4per:1234:0 old style naming based on clkctrl_name */
- if (clkctrl_name)
- return kasprintf(GFP_KERNEL, "%s_cm:clk:%04x:%d",
- clkctrl_name, offset, index);
-
- /* l4per_cm:1234:0 old style naming based on parent node name */
- if (legacy_naming)
- return kasprintf(GFP_KERNEL, "%pOFn:clk:%04x:%d",
- np->parent, offset, index);
-
- /* l4per-clkctrl:1234:0 style naming based on node name */
- return kasprintf(GFP_KERNEL, "%pOFn:%04x:%d", np, offset, index);
-}
-
static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
{
struct omap_clkctrl_provider *provider;
@@ -663,7 +661,7 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
hw->enable_reg.ptr = provider->base + reg_data->offset;
_ti_clkctrl_setup_subclks(provider, node, reg_data,
- hw->enable_reg.ptr);
+ hw->enable_reg.ptr, clkctrl_name);
if (reg_data->flags & CLKF_SW_SUP)
hw->enable_bit = MODULEMODE_SWCTRL;
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next reply other threads:[~2020-04-30 8:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-30 8:34 Tero Kristo [this message]
2020-04-30 20:24 ` [PATCH] clk: ti: clkctrl: convert subclocks to use proper names also Tony Lindgren
2020-05-13 3:18 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200430083451.8562-1-t-kristo@ti.com \
--to=t-kristo@ti.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).