From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Andrew F . Davis" <afd@ti.com>,
Santosh Shilimkar <ssantosh@kernel.org>,
Suman Anna <s-anna@ti.com>, Tero Kristo <t-kristo@ti.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org
Subject: [PATCH 3/6] soc: ti: omap-prm: Configure sgx power domain for am3 and am4
Date: Mon, 22 Jun 2020 09:46:49 -0700 [thread overview]
Message-ID: <20200622164652.12054-4-tony@atomide.com> (raw)
In-Reply-To: <20200622164652.12054-1-tony@atomide.com>
Let's configure only sgx power domain for am3 and am4 to start with.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/soc/ti/omap_prm.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -95,6 +95,18 @@ struct omap_reset_data {
#define PRM_ST_INTRANSITION BIT(20)
+static const struct __maybe_unused omap_prm_domain_map omap_prm_noinact = {
+ .usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_RETENTION) |
+ BIT(OMAP_PRMD_OFF),
+ .statechange = 1,
+ .logicretstate = 1,
+};
+
+static const struct __maybe_unused omap_prm_domain_map omap_prm_onoff_noauto = {
+ .usable_modes = BIT(OMAP_PRMD_ON_ACTIVE) | BIT(OMAP_PRMD_OFF),
+ .statechange = 1,
+};
+
static const struct omap_rst_map rst_map_0[] = {
{ .rst = 0, .st = 0 },
{ .rst = -1 },
@@ -156,7 +168,11 @@ static const struct omap_prm_data am3_prm_data[] = {
{ .name = "per", .base = 0x44e00c00, .rstctrl = 0x0, .rstmap = am3_per_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL, .clkdm_name = "pruss_ocp" },
{ .name = "wkup", .base = 0x44e00d00, .rstctrl = 0x0, .rstst = 0xc, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
{ .name = "device", .base = 0x44e00f00, .rstctrl = 0x0, .rstst = 0x8, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
- { .name = "gfx", .base = 0x44e01100, .rstctrl = 0x4, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" },
+ {
+ .name = "gfx", .base = 0x44e01100,
+ .pwrstctrl = 0, .pwrstst = 0x10, .dmap = &omap_prm_noinact,
+ .rstctrl = 0x4, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3",
+ },
{ },
};
@@ -172,7 +188,11 @@ static const struct omap_rst_map am4_device_rst_map[] = {
};
static const struct omap_prm_data am4_prm_data[] = {
- { .name = "gfx", .base = 0x44df0400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" },
+ {
+ .name = "gfx", .base = 0x44df0400,
+ .pwrstctrl = 0, .pwrstst = 0x4, .dmap = &omap_prm_onoff_noauto,
+ .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3",
+ },
{ .name = "per", .base = 0x44df0800, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am4_per_rst_map, .clkdm_name = "pruss_ocp" },
{ .name = "wkup", .base = 0x44df2000, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_NO_CLKDM },
{ .name = "device", .base = 0x44df4000, .rstctrl = 0x0, .rstst = 0x4, .rstmap = am4_device_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
--
2.27.0
next prev parent reply other threads:[~2020-06-22 16:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-22 16:46 [PATCHv3 0/6] Add initial genpd support for omap PRM driver Tony Lindgren
2020-06-22 16:46 ` [PATCH 1/6] dt-bindings: omap: Update PRM binding for genpd Tony Lindgren
2020-06-22 16:46 ` [PATCH 2/6] soc: ti: omap-prm: Add basic power domain support Tony Lindgren
2020-06-22 16:46 ` Tony Lindgren [this message]
2020-06-29 19:22 ` [PATCH 3/6] soc: ti: omap-prm: Configure sgx power domain for am3 and am4 kernel test robot
2020-07-02 15:40 ` Tony Lindgren
2020-06-22 16:46 ` [PATCH 4/6] soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain Tony Lindgren
2020-06-22 16:46 ` [PATCH 5/6] ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data Tony Lindgren
2020-06-22 16:46 ` [PATCH 6/6] ARM: dts: Configure omap4 and 5 l4_abe " Tony Lindgren
-- strict thread matches above, loose matches on Subject: below --
2020-07-02 15:45 [PATCHv4 0/6] Add initial genpd support for omap PRM driver Tony Lindgren
2020-07-02 15:45 ` [PATCH 3/6] soc: ti: omap-prm: Configure sgx power domain for am3 and am4 Tony Lindgren
2020-05-20 21:13 [PATCHv2 0/6] Add initial genpd support for omap PRM driver Tony Lindgren
2020-05-20 21:13 ` [PATCH 3/6] soc: ti: omap-prm: Configure sgx power domain for am3 and am4 Tony Lindgren
2020-05-12 20:38 [PATCH 0/6] Add initial genpd support for omap PRM driver Tony Lindgren
2020-05-12 20:38 ` [PATCH 3/6] soc: ti: omap-prm: Configure sgx power domain for am3 and am4 Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200622164652.12054-4-tony@atomide.com \
--to=tony@atomide.com \
--cc=afd@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s-anna@ti.com \
--cc=ssantosh@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).