Linux-OMAP Archive on lore.kernel.org
 help / color / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tom Joseph <tjoseph@cadence.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v7 04/14] PCI: cadence: Add support to start link and verify link status
Date: Mon, 13 Jul 2020 16:31:31 +0530
Message-ID: <20200713110141.13156-5-kishon@ti.com> (raw)
In-Reply-To: <20200713110141.13156-1-kishon@ti.com>

Add cdns_pcie_ops to start link and verify link status. The registers
to start link and to check link status is in Platform specific PCIe
wrapper. Add support for platform specific drivers to add callback
functions for the PCIe Cadence core to start link and verify link status.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../pci/controller/cadence/pcie-cadence-ep.c  |  8 ++++
 .../controller/cadence/pcie-cadence-host.c    | 28 ++++++++++++++
 drivers/pci/controller/cadence/pcie-cadence.h | 37 ++++++++++++++++++-
 3 files changed, 72 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c
index c6eb2db94680..034cb3cf726e 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-ep.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c
@@ -357,8 +357,10 @@ static int cdns_pcie_ep_start(struct pci_epc *epc)
 {
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
 	struct cdns_pcie *pcie = &ep->pcie;
+	struct device *dev = pcie->dev;
 	struct pci_epf *epf;
 	u32 cfg;
+	int ret;
 
 	/*
 	 * BIT(0) is hardwired to 1, hence function 0 is always enabled
@@ -369,6 +371,12 @@ static int cdns_pcie_ep_start(struct pci_epc *epc)
 		cfg |= BIT(epf->func_no);
 	cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, cfg);
 
+	ret = cdns_pcie_start_link(pcie);
+	if (ret) {
+		dev_err(dev, "Failed to start link\n");
+		return ret;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 030e828bfd4c..de02fadc4809 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -3,6 +3,7 @@
 // Cadence PCIe host controller driver.
 // Author: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
 
+#include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/list_sort.h>
 #include <linux/of_address.h>
@@ -419,6 +420,23 @@ static int cdns_pcie_host_init(struct device *dev,
 	return err;
 }
 
+static int cdns_pcie_host_wait_for_link(struct cdns_pcie *pcie)
+{
+	struct device *dev = pcie->dev;
+	int retries;
+
+	/* Check if the link is up or not */
+	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+		if (cdns_pcie_link_up(pcie)) {
+			dev_info(dev, "Link up\n");
+			return 0;
+		}
+		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+	}
+
+	return -ETIMEDOUT;
+}
+
 int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 {
 	struct device *dev = rc->pcie.dev;
@@ -467,6 +485,16 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 
 	pcie->mem_res = res;
 
+	ret = cdns_pcie_start_link(pcie);
+	if (ret) {
+		dev_err(dev, "Failed to start link\n");
+		return ret;
+	}
+
+	ret = cdns_pcie_host_wait_for_link(pcie);
+	if (ret)
+		dev_dbg(dev, "PCIe link never came up\n");
+
 	for (bar = RP_BAR0; bar <= RP_NO_BAR; bar++)
 		rc->avail_ib_bar[bar] = true;
 
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index a45c11158f49..54e10caf2d4b 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -10,6 +10,11 @@
 #include <linux/pci.h>
 #include <linux/phy/phy.h>
 
+/* Parameters for the waiting for link up routine */
+#define LINK_WAIT_MAX_RETRIES	10
+#define LINK_WAIT_USLEEP_MIN	90000
+#define LINK_WAIT_USLEEP_MAX	100000
+
 /*
  * Local Management Registers
  */
@@ -245,12 +250,20 @@ enum cdns_pcie_msg_routing {
 	MSG_ROUTING_GATHER,
 };
 
+struct cdns_pcie_ops {
+	int	(*start_link)(struct cdns_pcie *pcie);
+	void	(*stop_link)(struct cdns_pcie *pcie);
+	bool	(*link_up)(struct cdns_pcie *pcie);
+};
+
 /**
  * struct cdns_pcie - private data for Cadence PCIe controller drivers
  * @reg_base: IO mapped register base
  * @mem_res: start/end offsets in the physical system memory to map PCI accesses
  * @is_rc: tell whether the PCIe controller mode is Root Complex or Endpoint.
  * @bus: In Root Complex mode, the bus number
+ * @ops: Platform specific ops to control various inputs from Cadence PCIe
+ *       wrapper
  */
 struct cdns_pcie {
 	void __iomem		*reg_base;
@@ -261,7 +274,7 @@ struct cdns_pcie {
 	int			phy_count;
 	struct phy		**phy;
 	struct device_link	**link;
-	const struct cdns_pcie_common_ops *ops;
+	const struct cdns_pcie_ops *ops;
 };
 
 /**
@@ -426,6 +439,28 @@ static inline u32 cdns_pcie_ep_fn_readl(struct cdns_pcie *pcie, u8 fn, u32 reg)
 	return readl(pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg);
 }
 
+static inline int cdns_pcie_start_link(struct cdns_pcie *pcie)
+{
+	if (pcie->ops->start_link)
+		return pcie->ops->start_link(pcie);
+
+	return 0;
+}
+
+static inline void cdns_pcie_stop_link(struct cdns_pcie *pcie)
+{
+	if (pcie->ops->stop_link)
+		pcie->ops->stop_link(pcie);
+}
+
+static inline bool cdns_pcie_link_up(struct cdns_pcie *pcie)
+{
+	if (pcie->ops->link_up)
+		return pcie->ops->link_up(pcie);
+
+	return true;
+}
+
 #ifdef CONFIG_PCIE_CADENCE_HOST
 int cdns_pcie_host_setup(struct cdns_pcie_rc *rc);
 #else
-- 
2.17.1


  parent reply index

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-13 11:01 [PATCH v7 00/14] Add PCIe support to TI's J721E SoC Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 01/14] PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 02/14] linux/kernel.h: Add PTR_ALIGN_DOWN macro Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 03/14] PCI: cadence: Convert all r/w accessors to perform only 32-bit accesses Kishon Vijay Abraham I
2020-07-21 15:49   ` Lorenzo Pieralisi
2020-07-22  1:43     ` Kishon Vijay Abraham I
2020-07-13 11:01 ` Kishon Vijay Abraham I [this message]
2020-07-13 11:01 ` [PATCH v7 05/14] PCI: cadence: Allow pci_host_bridge to have custom pci_ops Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 06/14] dt-bindings: PCI: cadence: Remove "mem" from reg binding Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 07/14] PCI: cadence: Add new *ops* for CPU addr fixup Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 08/14] PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 09/14] PCI: cadence: Add MSI-X support to Endpoint driver Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 10/14] dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 11/14] dt-bindings: PCI: Add EP " Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 12/14] PCI: j721e: Add TI J721E PCIe driver Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 13/14] misc: pci_endpoint_test: Add J721E in pci_device_id table Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 14/14] MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe Kishon Vijay Abraham I
2020-07-20 10:08 ` [PATCH v7 00/14] Add PCIe support to TI's J721E SoC Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200713110141.13156-5-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tjoseph@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-OMAP Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-omap/0 linux-omap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-omap linux-omap/ https://lore.kernel.org/linux-omap \
		linux-omap@vger.kernel.org
	public-inbox-index linux-omap

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-omap


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git