linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Drew Fustini <drew@beagleboard.org>
To: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Kevin Hilman <khilman@kernel.org>,
	linux-omap@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] gpio: omap: handle pin config bias flags
Date: Wed, 15 Jul 2020 23:32:03 +0200	[thread overview]
Message-ID: <20200715213203.GA1639870@x1> (raw)
In-Reply-To: <1a0180f3-7693-672a-8070-7032854bb73c@ti.com>

On Wed, Jul 15, 2020 at 01:09:12PM +0300, Grygorii Strashko wrote:
> 
> 
> On 10/07/2020 01:34, Drew Fustini wrote:
> > Modify omap_gpio_set_config() to handle pin config bias flags by calling
> > gpiochip_generic_config().
> > 
> > The pin group for the gpio line must have the corresponding pinconf
> > properties:
> > 
> > PIN_CONFIG_BIAS_PULL_UP requires "pinctrl-single,bias-pullup"
> > PIN_CONFIG_BIAS_PULL_DOWN requires "pinctrl-single,bias-pulldown"
> > 
> > This is necessary for pcs_pinconf_set() to find the requested bias
> > parameter in the PIN_MAP_TYPE_CONFIGS_GROUP pinctrl map.
> > 
> > Signed-off-by: Drew Fustini <drew@beagleboard.org>
> > ---
> >   drivers/gpio/gpio-omap.c | 21 +++++++++++++++++----
> >   1 file changed, 17 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
> > index b8e2ecc3eade..a471a152f318 100644
> > --- a/drivers/gpio/gpio-omap.c
> > +++ b/drivers/gpio/gpio-omap.c
> > @@ -896,12 +896,25 @@ static int omap_gpio_set_config(struct gpio_chip *chip, unsigned offset,
> >   				unsigned long config)
> >   {
> >   	u32 debounce;
> > +	int ret;
> 
> ret =  -ENOTSUPP;
> 
> > -	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
> > -		return -ENOTSUPP;
> > +	if ((pinconf_to_config_param(config) == PIN_CONFIG_BIAS_DISABLE) ||
> > +	    (pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_UP) ||
> > +	    (pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_DOWN))
> > +	{
> > +		ret = gpiochip_generic_config(chip, offset, config);
> > +	}
> > +	else if (pinconf_to_config_param(config) == PIN_CONFIG_INPUT_DEBOUNCE)
> > +	{
> > +		debounce = pinconf_to_config_argument(config);
> > +		ret = omap_gpio_debounce(chip, offset, debounce);
> > +	}
> > +	else
> > +	{
> > +		ret = -ENOTSUPP;
> > +	}
> 
> drop above "else"?
> 
> > -	debounce = pinconf_to_config_argument(config);
> > -	return omap_gpio_debounce(chip, offset, debounce);
> > +	return ret;
> >   }
> >   static void omap_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
> > 
> 
> Minor comment, Otherwise:
> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
> 
> -- 
> Best regards,
> grygorii

Thanks for reviewing.  I'll post a new version with the return value
improvement per your suggestion.

-Drew

      reply	other threads:[~2020-07-15 21:32 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-09 22:34 [PATCH] gpio: omap: handle pin config bias flags Drew Fustini
2020-07-13 18:07 ` Tony Lindgren
2020-07-15 10:09 ` Grygorii Strashko
2020-07-15 21:32   ` Drew Fustini [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200715213203.GA1639870@x1 \
    --to=drew@beagleboard.org \
    --cc=bgolaszewski@baylibre.com \
    --cc=grygorii.strashko@ti.com \
    --cc=khilman@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).