Linux-OMAP Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] thermal: ti-soc-thermal: Replace HTTP links with HTTPS ones
@ 2020-07-16 19:08 Alexander A. Klimov
  0 siblings, 0 replies; only message in thread
From: Alexander A. Klimov @ 2020-07-16 19:08 UTC (permalink / raw)
  To: edubezval, j-keerthy, rui.zhang, daniel.lezcano, amit.kucheria,
	linux-pm, linux-omap, linux-kernel
  Cc: Alexander A. Klimov

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
---
 Continuing my work started at 93431e0607e5.
 See also: git log --oneline '--author=Alexander A. Klimov <grandmaster@al2klimov.de>' v5.7..master

 If there are any URLs to be removed completely or at least not just HTTPSified:
 Just clearly say so and I'll *undo my change*.
 See also: https://lkml.org/lkml/2020/6/27/64

 If there are any valid, but yet not changed URLs:
 See: https://lkml.org/lkml/2020/6/26/837

 If you apply the patch, please let me know.

 Sorry again to all maintainers who complained about subject lines.
 Now I realized that you want an actually perfect prefixes,
 not just subsystem ones.
 I tried my best...
 And yes, *I could* (at least half-)automate it.
 Impossible is nothing! :)


 drivers/thermal/ti-soc-thermal/dra752-bandgap.h     | 2 +-
 drivers/thermal/ti-soc-thermal/omap3-thermal-data.c | 2 +-
 drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h   | 2 +-
 drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h   | 2 +-
 drivers/thermal/ti-soc-thermal/ti-bandgap.c         | 2 +-
 drivers/thermal/ti-soc-thermal/ti-bandgap.h         | 2 +-
 drivers/thermal/ti-soc-thermal/ti-thermal-common.c  | 2 +-
 drivers/thermal/ti-soc-thermal/ti-thermal.h         | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/thermal/ti-soc-thermal/dra752-bandgap.h b/drivers/thermal/ti-soc-thermal/dra752-bandgap.h
index d1b5b699cf23..c3eae80b2ab5 100644
--- a/drivers/thermal/ti-soc-thermal/dra752-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/dra752-bandgap.h
@@ -2,7 +2,7 @@
 /*
  * DRA752 bandgap registers, bitfields and temperature definitions
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  * Contact:
  *   Eduardo Valentin <eduardo.valentin@ti.com>
  *   Tero Kristo <t-kristo@ti.com>
diff --git a/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
index 72e1ff270af7..80af315bae35 100644
--- a/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
+++ b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
@@ -6,7 +6,7 @@
  * Copyright (C) 2014 Pavel Machek <pavel@ucw.cz>
  *
  * Note
- * http://www.ti.com/lit/er/sprz278f/sprz278f.pdf "Advisory
+ * https://www.ti.com/lit/er/sprz278f/sprz278f.pdf "Advisory
  * 3.1.1.186 MMC OCP Clock Not Gated When Thermal Sensor Is Used"
  *
  * Also TI says:
diff --git a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
index a453ff8eb313..23352183dfe8 100644
--- a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
@@ -2,7 +2,7 @@
 /*
  * OMAP4xxx bandgap registers, bitfields and temperature definitions
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  * Contact:
  *   Eduardo Valentin <eduardo.valentin@ti.com>
  */
diff --git a/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h
index 3880e667ea96..c5a2e2abbe5f 100644
--- a/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h
@@ -2,7 +2,7 @@
 /*
  * OMAP5xxx bandgap registers, bitfields and temperature definitions
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  * Contact:
  *   Eduardo Valentin <eduardo.valentin@ti.com>
  */
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index ab19ceff6e2a..7bb7e9d12cda 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -2,7 +2,7 @@
 /*
  * TI Bandgap temperature sensor driver
  *
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
  * Author: J Keerthy <j-keerthy@ti.com>
  * Author: Moiz Sonasath <m-sonasath@ti.com>
  * Couple of fixes, DT and MFD adaptation:
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
index fce4657e9486..457027d07f05 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
@@ -2,7 +2,7 @@
 /*
  * OMAP4 Bandgap temperature sensor driver
  *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  * Contact:
  *   Eduardo Valentin <eduardo.valentin@ti.com>
  */
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 85776db4bf34..9121d28325a8 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -2,7 +2,7 @@
 /*
  * OMAP thermal driver interface
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  * Contact:
  *   Eduardo Valentin <eduardo.valentin@ti.com>
  */
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal.h b/drivers/thermal/ti-soc-thermal/ti-thermal.h
index c388ecf31834..7fb1e56a8333 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal.h
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal.h
@@ -2,7 +2,7 @@
 /*
  * OMAP thermal definitions
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  * Contact:
  *   Eduardo Valentin <eduardo.valentin@ti.com>
  */
-- 
2.27.0


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-16 19:08 [PATCH] thermal: ti-soc-thermal: Replace HTTP links with HTTPS ones Alexander A. Klimov

Linux-OMAP Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-omap/0 linux-omap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-omap linux-omap/ https://lore.kernel.org/linux-omap \
		linux-omap@vger.kernel.org
	public-inbox-index linux-omap

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-omap


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git