Linux-OMAP Archive on
 help / color / Atom feed
* [PATCH] arm: mach-omap1: mux.h: delete duplicate word
@ 2020-07-26  0:22 Randy Dunlap
  0 siblings, 0 replies; only message in thread
From: Randy Dunlap @ 2020-07-26  0:22 UTC (permalink / raw)
  To: linux-kernel; +Cc: Randy Dunlap, Aaro Koskinen, Tony Lindgren, linux-omap

Drop the repeated word "is".

Signed-off-by: Randy Dunlap <>
Cc: Aaro Koskinen <>
Cc: Tony Lindgren <>
 arch/arm/mach-omap1/include/mach/mux.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- linux-next-20200720.orig/arch/arm/mach-omap1/include/mach/mux.h
+++ linux-next-20200720/arch/arm/mach-omap1/include/mach/mux.h
@@ -88,7 +88,7 @@
  * OMAP730/850 has a slightly different config for the pin mux.
  * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
  *   not the FUNC_MUX_CTRL_x regs from hardware.h
- * - for pull-up/down, only has one enable bit which is is in the same register
+ * - for pull-up/down, only has one enable bit which is in the same register
  *   as mux config
 #define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-26  0:22 [PATCH] arm: mach-omap1: mux.h: delete duplicate word Randy Dunlap

Linux-OMAP Archive on

Archives are clonable:
	git clone --mirror linux-omap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-omap linux-omap/ \
	public-inbox-index linux-omap

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone