linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Grygorii Strashko <grygorii.strashko@ti.com>
To: "David S. Miller" <davem@davemloft.net>, <netdev@vger.kernel.org>,
	Jakub Kicinski <kuba@kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Murali Karicheri <m-karicheri2@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>,
	<linux-omap@vger.kernel.org>,
	Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH net-next 0/9] net: ethernet: ti: ale: add static configuration
Date: Sat, 5 Sep 2020 02:09:15 +0300	[thread overview]
Message-ID: <20200904230924.9971-1-grygorii.strashko@ti.com> (raw)

Hi All,

As existing, as newly introduced CPSW ALE versions have differences in 
supported features and ALE table formats. Especially it's actual for the
recent AM65x/J721E/J7200 and future AM64x SoCs, which supports more
features like: auto-aging, classifiers, Link aggregation, additional HW
filtering, etc.

The existing ALE configuration interface is not practical in terms of 
adding new features and requires consumers to program a lot static
parameters. And any attempt to add new features will case endless adding
and maintaining different combination of flags and options. Because CPSW
ALE configuration is static and fixed for SoC (or set of SoC), It is
reasonable to add support for static ALE configurations inside ALE module.

This series introduces static ALE configuration table for different ALE 
variants and provides option for consumers to select required ALE
configuration by providing ALE const char *dev_id identifier (Patch 2).
And all existing driver have been switched to use new approach (Patches 3-6).

After this ALE HW auto-ageing feature can be enabled for AM65x CPSW ALE 
variant (Patch 7).

Finally, Patches 8-9 introduces tables to describe the ALE VLAN entries 
fields as the ALE VLAN entries are too much differ between different TI
CPSW ALE versions. So, handling them using flags, defines and get/set
functions are became over-complicated.

Patch 1 - is preparation patch

Grygorii Strashko (9):
  net: ethernet: ti: ale: add cpsw_ale_get_num_entries api
  net: ethernet: ti: ale: add static configuration
  net: ethernet: ti: cpsw: use dev_id for ale configuration
  net: netcp: ethss: use dev_id for ale configuration
  net: ethernet: ti: am65-cpsw: use dev_id for ale configuration
  net: ethernet: ti: ale: make usage of ale dev_id mandatory
  net: ethernet: ti: am65-cpsw: enable hw auto ageing
  net: ethernet: ti: ale: switch to use tables for vlan entry
    description
  net: ethernet: ti: ale: add support for multi port k3 cpsw versions

 drivers/net/ethernet/ti/am65-cpsw-ethtool.c |  10 +-
 drivers/net/ethernet/ti/am65-cpsw-nuss.c    |  16 +-
 drivers/net/ethernet/ti/am65-cpsw-nuss.h    |   1 +
 drivers/net/ethernet/ti/cpsw.c              |   6 -
 drivers/net/ethernet/ti/cpsw_ale.c          | 421 ++++++++++++++++----
 drivers/net/ethernet/ti/cpsw_ale.h          |   7 +
 drivers/net/ethernet/ti/cpsw_ethtool.c      |   3 +-
 drivers/net/ethernet/ti/cpsw_new.c          |   1 -
 drivers/net/ethernet/ti/cpsw_priv.c         |   2 +-
 drivers/net/ethernet/ti/cpsw_priv.h         |   2 -
 drivers/net/ethernet/ti/netcp_ethss.c       |  18 +-
 11 files changed, 388 insertions(+), 99 deletions(-)

-- 
2.17.1


             reply	other threads:[~2020-09-04 23:09 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-04 23:09 Grygorii Strashko [this message]
2020-09-04 23:09 ` [PATCH net-next 1/9] net: ethernet: ti: ale: add cpsw_ale_get_num_entries api Grygorii Strashko
2020-09-04 23:09 ` [PATCH net-next 2/9] net: ethernet: ti: ale: add static configuration Grygorii Strashko
2020-09-04 23:09 ` [PATCH net-next 3/9] net: ethernet: ti: cpsw: use dev_id for ale configuration Grygorii Strashko
2020-09-04 23:09 ` [PATCH net-next 4/9] net: netcp: ethss: " Grygorii Strashko
2020-09-04 23:09 ` [PATCH net-next 5/9] net: ethernet: ti: am65-cpsw: " Grygorii Strashko
2020-09-04 23:09 ` [PATCH net-next 6/9] net: ethernet: ti: ale: make usage of ale dev_id mandatory Grygorii Strashko
2020-09-04 23:09 ` [PATCH net-next 7/9] net: ethernet: ti: am65-cpsw: enable hw auto ageing Grygorii Strashko
2020-09-04 23:09 ` [PATCH net-next 8/9] net: ethernet: ti: ale: switch to use tables for vlan entry description Grygorii Strashko
2020-09-05  0:09   ` Jakub Kicinski
2020-09-04 23:09 ` [PATCH net-next 9/9] net: ethernet: ti: ale: add support for multi port k3 cpsw versions Grygorii Strashko
2020-09-05  0:10   ` Jakub Kicinski
2020-09-07 14:33     ` Grygorii Strashko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200904230924.9971-1-grygorii.strashko@ti.com \
    --to=grygorii.strashko@ti.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=m-karicheri2@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).