linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Grygorii Strashko <grygorii.strashko@ti.com>
To: "David S. Miller" <davem@davemloft.net>, <netdev@vger.kernel.org>,
	Jakub Kicinski <kuba@kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Murali Karicheri <m-karicheri2@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>,
	<linux-omap@vger.kernel.org>,
	Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH net-next v3 7/9] net: ethernet: ti: am65-cpsw: enable hw auto ageing
Date: Thu, 10 Sep 2020 23:28:05 +0300	[thread overview]
Message-ID: <20200910202807.17473-8-grygorii.strashko@ti.com> (raw)
In-Reply-To: <20200910202807.17473-1-grygorii.strashko@ti.com>

The AM65x ALE supports HW auto-ageing which can be enabled by programming
ageing interval in ALE_AGING_TIMER register. For this CPSW fck_clk
frequency has to be know by ALE.

This patch extends cpsw_ale_params with bus_freq field and enables ALE HW
auto ageing for AM65x CPSW2G ALE version.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/net/ethernet/ti/am65-cpsw-nuss.c | 13 +++++
 drivers/net/ethernet/ti/am65-cpsw-nuss.h |  1 +
 drivers/net/ethernet/ti/cpsw_ale.c       | 61 +++++++++++++++++++++---
 drivers/net/ethernet/ti/cpsw_ale.h       |  1 +
 4 files changed, 70 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index bec47e794359..501d676fd88b 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -5,6 +5,7 @@
  *
  */
 
+#include <linux/clk.h>
 #include <linux/etherdevice.h>
 #include <linux/if_vlan.h>
 #include <linux/interrupt.h>
@@ -2038,6 +2039,7 @@ static int am65_cpsw_nuss_probe(struct platform_device *pdev)
 	struct am65_cpsw_common *common;
 	struct device_node *node;
 	struct resource *res;
+	struct clk *clk;
 	int ret, i;
 
 	common = devm_kzalloc(dev, sizeof(struct am65_cpsw_common), GFP_KERNEL);
@@ -2086,6 +2088,16 @@ static int am65_cpsw_nuss_probe(struct platform_device *pdev)
 	if (!common->ports)
 		return -ENOMEM;
 
+	clk = devm_clk_get(dev, "fck");
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "error getting fck clock %d\n", ret);
+		return ret;
+	}
+	common->bus_freq = clk_get_rate(clk);
+
 	pm_runtime_enable(dev);
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
@@ -2134,6 +2146,7 @@ static int am65_cpsw_nuss_probe(struct platform_device *pdev)
 	ale_params.ale_ports = common->port_num + 1;
 	ale_params.ale_regs = common->cpsw_base + AM65_CPSW_NU_ALE_BASE;
 	ale_params.dev_id = "am65x-cpsw2g";
+	ale_params.bus_freq = common->bus_freq;
 
 	common->ale = cpsw_ale_create(&ale_params);
 	if (IS_ERR(common->ale)) {
diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.h b/drivers/net/ethernet/ti/am65-cpsw-nuss.h
index 94f666ea0e53..993e1d4d3222 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.h
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.h
@@ -106,6 +106,7 @@ struct am65_cpsw_common {
 
 	u32			nuss_ver;
 	u32			cpsw_ver;
+	unsigned long		bus_freq;
 	bool			pf_p0_rx_ptype_rrobin;
 	struct am65_cpts	*cpts;
 	int			est_enabled;
diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index 524920a4bff0..7b54e9911b1e 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -32,6 +32,7 @@
 #define ALE_STATUS		0x04
 #define ALE_CONTROL		0x08
 #define ALE_PRESCALE		0x10
+#define ALE_AGING_TIMER		0x14
 #define ALE_UNKNOWNVLAN		0x18
 #define ALE_TABLE_CONTROL	0x20
 #define ALE_TABLE		0x34
@@ -46,6 +47,9 @@
 
 #define AM65_CPSW_ALE_THREAD_DEF_REG 0x134
 
+/* ALE_AGING_TIMER */
+#define ALE_AGING_TIMER_MASK	GENMASK(23, 0)
+
 enum {
 	CPSW_ALE_F_STATUS_REG = BIT(0), /* Status register present */
 	CPSW_ALE_F_HW_AUTOAGING = BIT(1), /* HW auto aging */
@@ -982,21 +986,66 @@ static void cpsw_ale_timer(struct timer_list *t)
 	}
 }
 
+static void cpsw_ale_hw_aging_timer_start(struct cpsw_ale *ale)
+{
+	u32 aging_timer;
+
+	aging_timer = ale->params.bus_freq / 1000000;
+	aging_timer *= ale->params.ale_ageout;
+
+	if (aging_timer & ~ALE_AGING_TIMER_MASK) {
+		aging_timer = ALE_AGING_TIMER_MASK;
+		dev_warn(ale->params.dev,
+			 "ALE aging timer overflow, set to max\n");
+	}
+
+	writel(aging_timer, ale->params.ale_regs + ALE_AGING_TIMER);
+}
+
+static void cpsw_ale_hw_aging_timer_stop(struct cpsw_ale *ale)
+{
+	writel(0, ale->params.ale_regs + ALE_AGING_TIMER);
+}
+
+static void cpsw_ale_aging_start(struct cpsw_ale *ale)
+{
+	if (!ale->params.ale_ageout)
+		return;
+
+	if (ale->features & CPSW_ALE_F_HW_AUTOAGING) {
+		cpsw_ale_hw_aging_timer_start(ale);
+		return;
+	}
+
+	timer_setup(&ale->timer, cpsw_ale_timer, 0);
+	ale->timer.expires = jiffies + ale->ageout;
+	add_timer(&ale->timer);
+}
+
+static void cpsw_ale_aging_stop(struct cpsw_ale *ale)
+{
+	if (!ale->params.ale_ageout)
+		return;
+
+	if (ale->features & CPSW_ALE_F_HW_AUTOAGING) {
+		cpsw_ale_hw_aging_timer_stop(ale);
+		return;
+	}
+
+	del_timer_sync(&ale->timer);
+}
+
 void cpsw_ale_start(struct cpsw_ale *ale)
 {
 	cpsw_ale_control_set(ale, 0, ALE_ENABLE, 1);
 	cpsw_ale_control_set(ale, 0, ALE_CLEAR, 1);
 
-	timer_setup(&ale->timer, cpsw_ale_timer, 0);
-	if (ale->ageout) {
-		ale->timer.expires = jiffies + ale->ageout;
-		add_timer(&ale->timer);
-	}
+	cpsw_ale_aging_start(ale);
 }
 
 void cpsw_ale_stop(struct cpsw_ale *ale)
 {
-	del_timer_sync(&ale->timer);
+	cpsw_ale_aging_stop(ale);
 	cpsw_ale_control_set(ale, 0, ALE_CLEAR, 1);
 	cpsw_ale_control_set(ale, 0, ALE_ENABLE, 0);
 }
diff --git a/drivers/net/ethernet/ti/cpsw_ale.h b/drivers/net/ethernet/ti/cpsw_ale.h
index 27b30802b384..9c6da58183c9 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.h
+++ b/drivers/net/ethernet/ti/cpsw_ale.h
@@ -25,6 +25,7 @@ struct cpsw_ale_params {
 	 */
 	u32			major_ver_mask;
 	const char		*dev_id;
+	unsigned long		bus_freq;
 };
 
 struct cpsw_ale {
-- 
2.17.1


  parent reply	other threads:[~2020-09-10 20:46 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-10 20:27 [PATCH net-next v3 0/9] net: ethernet: ti: ale: add static configuration Grygorii Strashko
2020-09-10 20:27 ` [PATCH net-next v3 1/9] net: ethernet: ti: ale: add cpsw_ale_get_num_entries api Grygorii Strashko
2020-09-10 20:28 ` [PATCH net-next v3 2/9] net: ethernet: ti: ale: add static configuration Grygorii Strashko
2020-09-10 20:28 ` [PATCH net-next v3 3/9] net: ethernet: ti: cpsw: use dev_id for ale configuration Grygorii Strashko
2020-09-10 20:28 ` [PATCH net-next v3 4/9] net: netcp: ethss: " Grygorii Strashko
2020-09-10 20:28 ` [PATCH net-next v3 5/9] net: ethernet: ti: am65-cpsw: " Grygorii Strashko
2020-09-10 20:28 ` [PATCH net-next v3 6/9] net: ethernet: ti: ale: make usage of ale dev_id mandatory Grygorii Strashko
2020-09-10 20:28 ` Grygorii Strashko [this message]
2020-09-10 20:28 ` [PATCH net-next v3 8/9] net: ethernet: ti: ale: switch to use tables for vlan entry description Grygorii Strashko
2020-09-10 20:28 ` [PATCH net-next v3 9/9] net: ethernet: ti: ale: add support for multi port k3 cpsw versions Grygorii Strashko
2020-09-12  0:35 ` [PATCH net-next v3 0/9] net: ethernet: ti: ale: add static configuration David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200910202807.17473-8-grygorii.strashko@ti.com \
    --to=grygorii.strashko@ti.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=m-karicheri2@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).