Linux-OMAP Archive on lore.kernel.org
 help / color / Atom feed
From: Grygorii Strashko <grygorii.strashko@ti.com>
To: Tony Lindgren <tony@atomide.com>, <linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Nishanth Menon <nm@ti.com>, Arnd Bergmann <arnd@arndb.de>
Cc: <linux-kernel@vger.kernel.org>, Sekhar Nori <nsekhar@ti.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Russell King <linux@armlinux.org.uk>,
	Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH] ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
Date: Thu, 1 Oct 2020 23:27:25 +0300
Message-ID: <20201001202725.16034-1-grygorii.strashko@ti.com> (raw)

Enable networking options required for NFS boot on TI platforms, which is
widely for automated test systems.
- enable new TI CPSW switch driver and related NET_SWITCHDEV config
- enable TI DP83867 phy
- explicitly enable PTP clock support to ensure dependent networking
drivers will stay built-in

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/configs/multi_v7_defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e9e76e32f10f..11b3184d8154 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -152,6 +152,7 @@ CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NET_SWITCHDEV=y
 CONFIG_NET_DSA=m
 CONFIG_CAN=y
 CONFIG_CAN_AT91=m
@@ -268,9 +269,12 @@ CONFIG_SNI_AVE=y
 CONFIG_STMMAC_ETH=y
 CONFIG_DWMAC_DWC_QOS_ETH=y
 CONFIG_TI_CPSW=y
+CONFIG_TI_CPSW_SWITCHDEV=y
+CONFIG_TI_CPTS=y
 CONFIG_XILINX_EMACLITE=y
 CONFIG_BROADCOM_PHY=y
 CONFIG_ICPLUS_PHY=y
+CONFIG_DP83867_PHY=y
 CONFIG_MARVELL_PHY=y
 CONFIG_MICREL_PHY=y
 CONFIG_AT803X_PHY=y
@@ -434,6 +438,7 @@ CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_SPI_XILINX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_SPMI=y
+CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_RZA2=y
 CONFIG_PINCTRL_STMFX=y
-- 
2.17.1


             reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-01 20:27 Grygorii Strashko [this message]
2020-10-02 12:50 ` Nishanth Menon
2020-10-29 19:15   ` Grygorii Strashko
2020-10-29 20:06     ` Arnd Bergmann
2020-10-30  9:36       ` Grygorii Strashko
2020-10-30 10:01         ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201001202725.16034-1-grygorii.strashko@ti.com \
    --to=grygorii.strashko@ti.com \
    --cc=arnd@arndb.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-OMAP Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-omap/0 linux-omap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-omap linux-omap/ https://lore.kernel.org/linux-omap \
		linux-omap@vger.kernel.org
	public-inbox-index linux-omap

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-omap


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git