From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>,
devicetree@vger.kernel.org, "Roger Quadros" <rogerq@ti.com>,
"Dave Gerlach" <d-gerlach@ti.com>, "Suman Anna" <s-anna@ti.com>,
"Tero Kristo" <t-kristo@ti.com>
Subject: [PATCH 07/18] ARM: OMAP2+: Drop legacy platform data for am3 and am4 gpmc
Date: Mon, 26 Oct 2020 13:22:11 +0200 [thread overview]
Message-ID: <20201026112222.56894-8-tony@atomide.com> (raw)
In-Reply-To: <20201026112222.56894-1-tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/am335x-nano.dts | 1 -
arch/arm/boot/dts/am33xx.dtsi | 48 ++++++++++++------
arch/arm/boot/dts/am4372.dtsi | 49 +++++++++++++------
.../omap_hwmod_33xx_43xx_common_data.h | 2 -
.../omap_hwmod_33xx_43xx_interconnect_data.c | 8 ---
.../omap_hwmod_33xx_43xx_ipblock_data.c | 33 -------------
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 1 -
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 1 -
8 files changed, 65 insertions(+), 78 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -238,7 +238,6 @@ &elm {
&gpmc {
compatible = "ti,am3352-gpmc";
- ti,hwmods = "gpmc";
status = "okay";
gpmc,num-waitpins = <2>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -480,23 +480,39 @@ emif: emif@4c000000 {
ti,no-idle;
};
- gpmc: gpmc@50000000 {
- compatible = "ti,am3352-gpmc";
- ti,hwmods = "gpmc";
- ti,no-idle-on-init;
- reg = <0x50000000 0x2000>;
- interrupts = <100>;
- dmas = <&edma 52 0>;
- dma-names = "rxtx";
- gpmc,num-cs = <7>;
- gpmc,num-waitpins = <2>;
- #address-cells = <2>;
+ target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000000 4>,
+ <0x50000010 4>,
+ <0x50000014 4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3s_clkctrl AM3_L3S_GPMC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
#size-cells = <1>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- status = "disabled";
+ ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+ <0x00000000 0x00000000 0x40000000>; /* data */
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ reg = <0x50000000 0x2000>;
+ interrupts = <100>;
+ dmas = <&edma 52 0>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <7>;
+ gpmc,num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
};
sham_target: target-module@53100000 {
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -434,24 +434,41 @@ pruss_tm: target-module@54400000 {
ranges = <0x0 0x54400000 0x80000>;
};
- gpmc: gpmc@50000000 {
- compatible = "ti,am3352-gpmc";
- ti,hwmods = "gpmc";
- dmas = <&edma 52 0>;
- dma-names = "rxtx";
- clocks = <&l3s_gclk>;
+ target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000000 4>,
+ <0x50000010 4>,
+ <0x50000014 4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3s_clkctrl AM4_L3S_GPMC_CLKCTRL 0>;
clock-names = "fck";
- reg = <0x50000000 0x2000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- gpmc,num-cs = <7>;
- gpmc,num-waitpins = <2>;
- #address-cells = <2>;
+ #address-cells = <1>;
#size-cells = <1>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- status = "disabled";
+ ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+ <0x00000000 0x00000000 0x40000000>; /* data */
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ dmas = <&edma 52 0>;
+ dma-names = "rxtx";
+ clocks = <&l3s_gclk>;
+ clock-names = "fck";
+ reg = <0x50000000 0x2000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ gpmc,num-cs = <7>;
+ gpmc,num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
};
target-module@47900000 {
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -26,7 +26,6 @@ extern struct omap_hwmod_ocp_if am33xx_mpu__prcm;
extern struct omap_hwmod_ocp_if am33xx_l3_s__l3_main;
extern struct omap_hwmod_ocp_if am33xx_gfx__l3_main;
extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx;
-extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2;
extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc;
@@ -41,7 +40,6 @@ extern struct omap_hwmod am33xx_prcm_hwmod;
extern struct omap_hwmod am33xx_ocmcram_hwmod;
extern struct omap_hwmod am33xx_smartreflex0_hwmod;
extern struct omap_hwmod am33xx_smartreflex1_hwmod;
-extern struct omap_hwmod am33xx_gpmc_hwmod;
extern struct omap_hwmod_class am33xx_emif_hwmod_class;
extern struct omap_hwmod_class am33xx_l4_hwmod_class;
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -74,14 +74,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l3s cfg -> gpmc */
-struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
- .master = &am33xx_l3_s_hwmod,
- .slave = &am33xx_gpmc_hwmod,
- .clk = "l3s_gclk",
- .user = OCP_USER_MPU,
-};
-
/* l3 main -> ocmc */
struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
.master = &am33xx_l3_main_hwmod,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -218,44 +218,12 @@ struct omap_hwmod_class am33xx_control_hwmod_class = {
.name = "control",
};
-
-/* gpmc */
-static struct omap_hwmod_class_sysconfig gpmc_sysc = {
- .rev_offs = 0x0,
- .sysc_offs = 0x10,
- .syss_offs = 0x14,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_gpmc_hwmod_class = {
- .name = "gpmc",
- .sysc = &gpmc_sysc,
-};
-
-struct omap_hwmod am33xx_gpmc_hwmod = {
- .name = "gpmc",
- .class = &am33xx_gpmc_hwmod_class,
- .clkdm_name = "l3s_clkdm",
- /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
- .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS,
- .main_clk = "l3s_gclk",
- .prcm = {
- .omap4 = {
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
static void omap_hwmod_am33xx_clkctrl(void)
{
CLKCTRL(am33xx_smartreflex0_hwmod,
AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
CLKCTRL(am33xx_smartreflex1_hwmod,
AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l3_main_hwmod, AM33XX_CM_PER_L3_CLKCTRL_OFFSET);
@@ -275,7 +243,6 @@ static void omap_hwmod_am43xx_clkctrl(void)
AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
CLKCTRL(am33xx_smartreflex1_hwmod,
AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET);
- CLKCTRL(am33xx_gpmc_hwmod, AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l3_main_hwmod, AM43XX_CM_PER_L3_CLKCTRL_OFFSET);
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -214,7 +214,6 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l3_main__debugss,
&am33xx_l4_wkup__smartreflex0,
&am33xx_l4_wkup__smartreflex1,
- &am33xx_l3_s__gpmc,
&am33xx_l3_main__ocmc,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -150,7 +150,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_wkup__control,
&am43xx_l4_wkup__smartreflex0,
&am43xx_l4_wkup__smartreflex1,
- &am33xx_l3_s__gpmc,
&am33xx_l3_main__ocmc,
NULL,
};
--
2.29.1
next prev parent reply other threads:[~2020-10-26 11:22 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-26 11:22 [PATCH 00/18] Drop remaining pdata for am335x and use genpd Tony Lindgren
2020-10-26 11:22 ` [PATCH 01/18] ARM: dts: am33xx: add remaining PRM instances Tony Lindgren
2020-10-26 11:22 ` [PATCH 02/18] ARM: dts: Configure also interconnect clocks for am3 system timers Tony Lindgren
2020-10-26 11:22 ` [PATCH 03/18] ARM: OMAP2+: Drop legacy platform data for am3 control module Tony Lindgren
2020-10-26 11:22 ` [PATCH 04/18] ARM: dts: Configure RTC powerdomain for am3 Tony Lindgren
2020-10-26 11:22 ` [PATCH 05/18] ARM: dts: Configure interconnect target module for am3 wkup_m3 Tony Lindgren
2020-10-26 11:22 ` [PATCH 06/18] ARM: OMAP2+: Drop legacy platform data " Tony Lindgren
2020-10-26 11:22 ` Tony Lindgren [this message]
2020-10-26 11:22 ` [PATCH 08/18] ARM: OMAP2+: Drop legacy platform data for am3 debugss Tony Lindgren
2020-10-26 11:22 ` [PATCH 09/18] ARM: OMAP2+: Drop legacy platform data for am3 emif Tony Lindgren
2020-10-26 11:22 ` [PATCH 10/18] ARM: OMAP2+: Drop legacy platform data for am3 ocmcram Tony Lindgren
2020-10-26 11:22 ` [PATCH 11/18] ARM: OMAP2+: Drop legacy platform data for am3 instr Tony Lindgren
2020-10-26 11:22 ` [PATCH 12/18] ARM: OMAP2+: Drop legacy platform data for am3 mpuss Tony Lindgren
2020-10-26 11:22 ` [PATCH 13/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkup Tony Lindgren
[not found] ` <CAMuHMdWribr=eg1LkKce=Hamm+JwSz5UFEXLKUmKkqqz1RpL_w@mail.gmail.com>
2021-01-13 16:23 ` Tony Lindgren
2021-01-13 16:41 ` Geert Uytterhoeven
2021-01-13 16:47 ` Tony Lindgren
2021-01-13 17:28 ` Tony Lindgren
2021-01-14 7:20 ` Tony Lindgren
2021-01-14 7:58 ` Vaittinen, Matti
2021-01-14 8:08 ` Tony Lindgren
2021-01-14 8:32 ` Matti Vaittinen
2021-01-14 8:52 ` Geert Uytterhoeven
2021-01-15 8:12 ` Tony Lindgren
2020-10-26 11:22 ` [PATCH 14/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_fast Tony Lindgren
2020-10-26 11:22 ` [PATCH 15/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_per Tony Lindgren
2020-10-26 11:22 ` [PATCH 16/18] ARM: dts: Use simple-pm-bus for genpd for am3 l3 Tony Lindgren
2020-10-26 11:22 ` [PATCH 17/18] ARM: OMAP2+: Drop legacy remaining legacy platform data for am3 Tony Lindgren
2020-10-26 11:22 ` [PATCH 18/18] ARM: OMAP2+: Build hwmod related code as needed Tony Lindgren
2020-10-26 13:10 ` [PATCH 00/18] Drop remaining pdata for am335x and use genpd Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201026112222.56894-8-tony@atomide.com \
--to=tony@atomide.com \
--cc=bcousson@baylibre.com \
--cc=d-gerlach@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=rogerq@ti.com \
--cc=s-anna@ti.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).