Hi!

> From: Carl Philipp Klemm <philipp@uvos.xyz>
> 
> The omap4430 HS HIGH performance devces support 1.2GHz opp, lower speed
> variants do not. However for mapphone devices Motorola seems to have
> decided that this does not really matter for the SoC variants they have
> tested to use, and decided to clock all devices, including the ones with
> STANDARD performance chips at 1.2GHz upon release of the 3.0.8 vendor
> kernel shiped with Android 4.0. Therefore it seems safe to do the same,
> but let's only do it for Motorola devices as the others have not been
> tested.
> 
> Note that we prevent overheating with the passive cooling device
> cpu_alert0 configured in the dts file that starts lowering the speed as
> needed.
> 
> This also removes the "failed to find current OPP for freq 1200000000"
> warning.

> +&cpu0 {
> +        /*
> +	 * Note that the 1.2GiHz mode is enabled for all SoC variants for
> +	 * the Motorola Android Linux v3.0.8 based kernel.
> +	 */

I'm pretty sure it is GHz, not GiHz.

> +        operating-points = <
> +	        /* kHz    uV */
> +	        300000  1025000
> +	        600000  1200000
> +	        800000  1313000
> +	        1008000 1375000
> +		1200000 1375000
> +        >;

Is it intended to be 1.008GHz, or is it a typo?

Best regards,
								Pavel
-- 
http://www.livejournal.com/~pavelmachek