[PATCHv2 00/12] Drop legacy platform data for dra7

[PATCHv2 00/12] Drop legacy platform data for dra7

[Tony Lindgren]

Hi all,

Here's v2 series to update dra7 to probe with ti-sysc and genpd like we've
already done for am3 and 4. This series depends on the related driver
and dts changes:

[PATCHv2 00/15] Update dra7 devicetree files to probe with genpd

Note that the driver and device tree changes series has dependencies
listed in the cover letter.

Please review and test. I've also pushed out a temporary testing branch
with all the related patches to make testing easier, the test branch is
at [0][1] below.

Regards,

Tony

Changes since v1:

- Split the series into two parts, looks like most of the emails did not
  make it to the lists

- Dropped Balaji from Cc as the email address bounces

[0] git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git tmp-testing-genpd-dra7
[1] https://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v5.12/tmp-testing-genpd-dra7

Tony Lindgren (12):
  ARM: OMAP2+: Drop legacy platform data for dra7 pcie
  ARM: OMAP2+: Drop legacy platform data for dra7 qspi
  ARM: OMAP2+: Drop legacy platform data for dra7 sata
  ARM: OMAP2+: Drop legacy platform data for dra7 mpu
  ARM: OMAP2+: Drop legacy platform data for dra7 dmm
  ARM: OMAP2+: Drop legacy platform data for dra7 l4_wkup
  ARM: OMAP2+: Drop legacy platform data for dra7 l4_per1
  ARM: OMAP2+: Drop legacy platform data for dra7 l4_per2
  ARM: OMAP2+: Drop legacy platform data for dra7 l4_per3
  ARM: OMAP2+: Drop legacy platform data for dra7 l4_cfg
  ARM: OMAP2+: Drop legacy platform data for dra7 l3
  ARM: OMAP2+: Drop legacy platform data for dra7 hwmod

 arch/arm/boot/dts/dra7-l4.dtsi            |   1 -
 arch/arm/boot/dts/dra7.dtsi               |   6 -
 arch/arm/mach-omap2/Kconfig               |   1 -
 arch/arm/mach-omap2/Makefile              |   1 -
 arch/arm/mach-omap2/common.h              |   9 -
 arch/arm/mach-omap2/io.c                  |   2 -
 arch/arm/mach-omap2/omap_hwmod.c          |   8 -
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 719 ----------------------
 8 files changed, 747 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/omap_hwmod_7xx_data.c

-- 
2.30.0

[PATCH 01/12] ARM: OMAP2+: Drop legacy platform data for dra7 pcie

[Tony Lindgren]

We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.

As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.

Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7.dtsi               |   3 -
 arch/arm/mach-omap2/common.h              |   9 --
 arch/arm/mach-omap2/omap_hwmod.c          |   8 --
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 114 ----------------------
 4 files changed, 134 deletions(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -215,7 +215,6 @@ pcie1_rc: pcie@51000000 {
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				linux,pci-domain = <0>;
-				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
 				ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
@@ -243,7 +242,6 @@ pcie1_ep: pcie_ep@51000000 {
 				num-lanes = <1>;
 				num-ib-windows = <4>;
 				num-ob-windows = <16>;
-				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
 				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
@@ -288,7 +286,6 @@ pcie2_rc: pcie@51800000 {
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				linux,pci-domain = <1>;
-				ti,hwmods = "pcie2";
 				phys = <&pcie2_phy>;
 				phy-names = "pcie-phy0";
 				interrupt-map-mask = <0 0 0 7>;
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -343,15 +343,6 @@ static inline void omap5_secondary_hyp_startup(void)
 }
 #endif
 
-#ifdef CONFIG_SOC_DRA7XX
-extern int dra7xx_pciess_reset(struct omap_hwmod *oh);
-#else
-static inline int dra7xx_pciess_reset(struct omap_hwmod *oh)
-{
-	return 0;
-}
-#endif
-
 struct omap_system_dma_plat_info;
 
 void pdata_quirks_init(const struct of_device_id *);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3495,10 +3495,6 @@ static const struct omap_hwmod_reset omap24xx_reset_quirks[] = {
 	{ .match = "msdi", .len = 4, .reset = omap_msdi_reset, },
 };
 
-static const struct omap_hwmod_reset dra7_reset_quirks[] = {
-	{ .match = "pcie", .len = 4, .reset = dra7xx_pciess_reset, },
-};
-
 static const struct omap_hwmod_reset omap_reset_quirks[] = {
 	{ .match = "dss_core", .len = 8, .reset = omap_dss_reset, },
 	{ .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, },
@@ -3534,10 +3530,6 @@ omap_hwmod_init_reset_quirks(struct device *dev, struct omap_hwmod *oh,
 					    omap24xx_reset_quirks,
 					    ARRAY_SIZE(omap24xx_reset_quirks));
 
-	if (soc_is_dra7xx())
-		omap_hwmod_init_reset_quirk(dev, oh, data, dra7_reset_quirks,
-					    ARRAY_SIZE(dra7_reset_quirks));
-
 	omap_hwmod_init_reset_quirk(dev, oh, data, omap_reset_quirks,
 				    ARRAY_SIZE(omap_reset_quirks));
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -266,84 +266,6 @@ static struct omap_hwmod dra7xx_mpu_hwmod = {
 	},
 };
 
-
-/*
- * 'PCIE' class
- *
- */
-
-/*
- * As noted in documentation for _reset() in omap_hwmod.c, the stock reset
- * functionality of OMAP HWMOD layer does not deassert the hardreset lines
- * associated with an IP automatically leaving the driver to handle that
- * by itself. This does not work for PCIeSS which needs the reset lines
- * deasserted for the driver to start accessing registers.
- *
- * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset
- * lines after asserting them.
- */
-int dra7xx_pciess_reset(struct omap_hwmod *oh)
-{
-	int i;
-
-	for (i = 0; i < oh->rst_lines_cnt; i++) {
-		omap_hwmod_assert_hardreset(oh, oh->rst_lines[i].name);
-		omap_hwmod_deassert_hardreset(oh, oh->rst_lines[i].name);
-	}
-
-	return 0;
-}
-
-static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
-	.name	= "pcie",
-	.reset	= dra7xx_pciess_reset,
-};
-
-/* pcie1 */
-static struct omap_hwmod_rst_info dra7xx_pciess1_resets[] = {
-	{ .name = "pcie", .rst_shift = 0 },
-};
-
-static struct omap_hwmod dra7xx_pciess1_hwmod = {
-	.name		= "pcie1",
-	.class		= &dra7xx_pciess_hwmod_class,
-	.clkdm_name	= "pcie_clkdm",
-	.rst_lines	= dra7xx_pciess1_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(dra7xx_pciess1_resets),
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
-			.rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* pcie2 */
-static struct omap_hwmod_rst_info dra7xx_pciess2_resets[] = {
-	{ .name = "pcie", .rst_shift = 1 },
-};
-
-/* pcie2 */
-static struct omap_hwmod dra7xx_pciess2_hwmod = {
-	.name		= "pcie2",
-	.class		= &dra7xx_pciess_hwmod_class,
-	.clkdm_name	= "pcie_clkdm",
-	.rst_lines	= dra7xx_pciess2_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(dra7xx_pciess2_resets),
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET,
-			.rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /*
  * 'qspi' class
  *
@@ -579,38 +501,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> pciess1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_pciess1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> pciess1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pciess1_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> pciess2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_pciess2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> pciess2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pciess2_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> qspi */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -675,10 +565,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__bb2d,
 	&dra7xx_l4_wkup__ctrl_module_wkup,
 	&dra7xx_l4_cfg__mpu,
-	&dra7xx_l3_main_1__pciess1,
-	&dra7xx_l4_cfg__pciess1,
-	&dra7xx_l3_main_1__pciess2,
-	&dra7xx_l4_cfg__pciess2,
 	&dra7xx_l3_main_1__qspi,
 	&dra7xx_l4_cfg__sata,
 	&dra7xx_l3_main_1__vcp1,
-- 
2.30.0

[PATCH 02/12] ARM: OMAP2+: Drop legacy platform data for dra7 qspi

[Tony Lindgren]

We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.

As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.

Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7.dtsi               |  1 -
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 43 -----------------------
 2 files changed, 44 deletions(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -770,7 +770,6 @@ abb_gpu: regulator-abb-gpu {
 
 		target-module@4b300000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "qspi";
 			reg = <0x4b300000 0x4>,
 			      <0x4b300010 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -266,40 +266,6 @@ static struct omap_hwmod dra7xx_mpu_hwmod = {
 	},
 };
 
-/*
- * 'qspi' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_qspi_sysc = {
-	.rev_offs	= 0,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class dra7xx_qspi_hwmod_class = {
-	.name	= "qspi",
-	.sysc	= &dra7xx_qspi_sysc,
-};
-
-/* qspi */
-static struct omap_hwmod dra7xx_qspi_hwmod = {
-	.name		= "qspi",
-	.class		= &dra7xx_qspi_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.main_clk	= "qspi_gfclk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER2_QSPI_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER2_QSPI_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /*
  * 'sata' class
  *
@@ -501,14 +467,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> qspi */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_qspi_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_cfg -> sata */
 static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = {
 	.master		= &dra7xx_l4_cfg_hwmod,
@@ -565,7 +523,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__bb2d,
 	&dra7xx_l4_wkup__ctrl_module_wkup,
 	&dra7xx_l4_cfg__mpu,
-	&dra7xx_l3_main_1__qspi,
 	&dra7xx_l4_cfg__sata,
 	&dra7xx_l3_main_1__vcp1,
 	&dra7xx_l4_per2__vcp1,
-- 
2.30.0

[PATCH 03/12] ARM: OMAP2+: Drop legacy platform data for dra7 sata

[Tony Lindgren]

We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.

As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7-l4.dtsi            |  1 -
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 47 -----------------------
 2 files changed, 48 deletions(-)

diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -576,7 +576,6 @@ target-module@8000 {			/* 0x4a108000, ap 29 1e.0 */
 
 		target-module@40000 {			/* 0x4a140000, ap 31 06.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "sata";
 			reg = <0x400fc 4>,
 			      <0x41100 4>;
 			reg-names = "rev", "sysc";
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -266,44 +266,6 @@ static struct omap_hwmod dra7xx_mpu_hwmod = {
 	},
 };
 
-/*
- * 'sata' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_sata_sysc = {
-	.rev_offs	= 0x00fc,
-	.sysc_offs	= 0x0000,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class dra7xx_sata_hwmod_class = {
-	.name	= "sata",
-	.sysc	= &dra7xx_sata_sysc,
-};
-
-/* sata */
-
-static struct omap_hwmod dra7xx_sata_hwmod = {
-	.name		= "sata",
-	.class		= &dra7xx_sata_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "func_48m_fclk",
-	.mpu_rt_idx	= 1,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_SATA_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /*
  * 'vcp' class
  *
@@ -467,14 +429,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> sata */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_sata_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> vcp1 */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -523,7 +477,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__bb2d,
 	&dra7xx_l4_wkup__ctrl_module_wkup,
 	&dra7xx_l4_cfg__mpu,
-	&dra7xx_l4_cfg__sata,
 	&dra7xx_l3_main_1__vcp1,
 	&dra7xx_l4_per2__vcp1,
 	&dra7xx_l3_main_1__vcp2,
-- 
2.30.0

[PATCH 04/12] ARM: OMAP2+: Drop legacy platform data for dra7 mpu

[Tony Lindgren]

We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.

As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7.dtsi               |  1 -
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 42 -----------------------
 2 files changed, 43 deletions(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -158,7 +158,6 @@ l4_per1: interconnect@48000000 {
 
 		target-module@48210000 {
 			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			ti,hwmods = "mpu";
 			power-domains = <&prm_mpu>;
 			clocks = <&mpu_clkctrl DRA7_MPU_CLKCTRL 0>;
 			clock-names = "fck";
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -242,30 +242,6 @@ static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = {
 	},
 };
 
-/*
- * 'mpu' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_mpu_hwmod_class = {
-	.name	= "mpu",
-};
-
-/* mpu */
-static struct omap_hwmod dra7xx_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &dra7xx_mpu_hwmod_class,
-	.clkdm_name	= "mpu_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
-	.main_clk	= "dpll_mpu_m2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_MPU_MPU_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_MPU_MPU_CONTEXT_OFFSET,
-		},
-	},
-};
-
 /*
  * 'vcp' class
  *
@@ -333,14 +309,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_1 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* mpu -> l3_main_1 */
-static struct omap_hwmod_ocp_if dra7xx_mpu__l3_main_1 = {
-	.master		= &dra7xx_mpu_hwmod,
-	.slave		= &dra7xx_l3_main_1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3_main_1 -> l3_main_2 */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l3_main_2 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -421,14 +389,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> mpu */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_mpu_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> vcp1 */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -465,7 +425,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__dmm,
 	&dra7xx_l3_main_2__l3_instr,
 	&dra7xx_l4_cfg__l3_main_1,
-	&dra7xx_mpu__l3_main_1,
 	&dra7xx_l3_main_1__l3_main_2,
 	&dra7xx_l4_cfg__l3_main_2,
 	&dra7xx_l3_main_1__l4_cfg,
@@ -476,7 +435,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_per2__atl,
 	&dra7xx_l3_main_1__bb2d,
 	&dra7xx_l4_wkup__ctrl_module_wkup,
-	&dra7xx_l4_cfg__mpu,
 	&dra7xx_l3_main_1__vcp1,
 	&dra7xx_l4_per2__vcp1,
 	&dra7xx_l3_main_1__vcp2,
-- 
2.30.0

[PATCH 05/12] ARM: OMAP2+: Drop legacy platform data for dra7 dmm

[Tony Lindgren]

We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.

As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7.dtsi               |  1 -
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 30 -----------------------
 2 files changed, 31 deletions(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -465,7 +465,6 @@ edma_tptc1: dma@0 {
 
 		target-module@4e000000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "dmm";
 			reg = <0x4e000000 0x4>,
 			      <0x4e000010 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -30,27 +30,6 @@
  * IP blocks
  */
 
-/*
- * 'dmm' class
- * instance(s): dmm
- */
-static struct omap_hwmod_class dra7xx_dmm_hwmod_class = {
-	.name	= "dmm",
-};
-
-/* dmm */
-static struct omap_hwmod dra7xx_dmm_hwmod = {
-	.name		= "dmm",
-	.class		= &dra7xx_dmm_hwmod_class,
-	.clkdm_name	= "emif_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_EMIF_DMM_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_EMIF_DMM_CONTEXT_OFFSET,
-		},
-	},
-};
-
 /*
  * 'l3' class
  * instance(s): l3_instr, l3_main_1, l3_main_2
@@ -285,14 +264,6 @@ static struct omap_hwmod dra7xx_vcp2_hwmod = {
  * Interfaces
  */
 
-/* l3_main_1 -> dmm */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dmm = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_dmm_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_SDMA,
-};
-
 /* l3_main_2 -> l3_instr */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_2__l3_instr = {
 	.master		= &dra7xx_l3_main_2_hwmod,
@@ -422,7 +393,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp2 = {
 };
 
 static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
-	&dra7xx_l3_main_1__dmm,
 	&dra7xx_l3_main_2__l3_instr,
 	&dra7xx_l4_cfg__l3_main_1,
 	&dra7xx_l3_main_1__l3_main_2,
-- 
2.30.0

[PATCH 06/12] ARM: OMAP2+: Drop legacy platform data for dra7 l4_wkup

[Tony Lindgren]

We can now probe interconnects with simple-pm-bus and genpd.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 54 +----------------------
 1 file changed, 1 insertion(+), 53 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -81,7 +81,7 @@ static struct omap_hwmod dra7xx_l3_main_2_hwmod = {
 
 /*
  * 'l4' class
- * instance(s): l4_cfg, l4_per1, l4_per2, l4_per3, l4_wkup
+ * instance(s): l4_cfg, l4_per1, l4_per2, l4_per3
  */
 static struct omap_hwmod_class dra7xx_l4_hwmod_class = {
 	.name	= "l4",
@@ -139,19 +139,6 @@ static struct omap_hwmod dra7xx_l4_per3_hwmod = {
 	},
 };
 
-/* l4_wkup */
-static struct omap_hwmod dra7xx_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &dra7xx_l4_hwmod_class,
-	.clkdm_name	= "wkupaon_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET,
-		},
-	},
-};
-
 /*
  * 'atl' class
  *
@@ -200,27 +187,6 @@ static struct omap_hwmod dra7xx_bb2d_hwmod = {
 	},
 };
 
-/*
- * 'ctrl_module' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_ctrl_module_hwmod_class = {
-	.name	= "ctrl_module",
-};
-
-/* ctrl_module_wkup */
-static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = {
-	.name		= "ctrl_module_wkup",
-	.class		= &dra7xx_ctrl_module_hwmod_class,
-	.clkdm_name	= "wkupaon_clkdm",
-	.prcm = {
-		.omap4 = {
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
 /*
  * 'vcp' class
  *
@@ -328,14 +294,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> l4_wkup */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_wkup = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_l4_wkup_hwmod,
-	.clk		= "wkupaon_iclk_mux",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_per2 -> atl */
 static struct omap_hwmod_ocp_if dra7xx_l4_per2__atl = {
 	.master		= &dra7xx_l4_per2_hwmod,
@@ -352,14 +310,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__bb2d = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_wkup -> ctrl_module_wkup */
-static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
-	.master		= &dra7xx_l4_wkup_hwmod,
-	.slave		= &dra7xx_ctrl_module_wkup_hwmod,
-	.clk		= "wkupaon_iclk_mux",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> vcp1 */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -401,10 +351,8 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__l4_per1,
 	&dra7xx_l3_main_1__l4_per2,
 	&dra7xx_l3_main_1__l4_per3,
-	&dra7xx_l3_main_1__l4_wkup,
 	&dra7xx_l4_per2__atl,
 	&dra7xx_l3_main_1__bb2d,
-	&dra7xx_l4_wkup__ctrl_module_wkup,
 	&dra7xx_l3_main_1__vcp1,
 	&dra7xx_l4_per2__vcp1,
 	&dra7xx_l3_main_1__vcp2,
-- 
2.30.0

[PATCH 07/12] ARM: OMAP2+: Drop legacy platform data for dra7 l4_per1

[Tony Lindgren]

We can now probe interconnects with simple-pm-bus and genpd.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 24 +----------------------
 1 file changed, 1 insertion(+), 23 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -81,7 +81,7 @@ static struct omap_hwmod dra7xx_l3_main_2_hwmod = {
 
 /*
  * 'l4' class
- * instance(s): l4_cfg, l4_per1, l4_per2, l4_per3
+ * instance(s): l4_cfg, l4_per2, l4_per3
  */
 static struct omap_hwmod_class dra7xx_l4_hwmod_class = {
 	.name	= "l4",
@@ -100,19 +100,6 @@ static struct omap_hwmod dra7xx_l4_cfg_hwmod = {
 	},
 };
 
-/* l4_per1 */
-static struct omap_hwmod dra7xx_l4_per1_hwmod = {
-	.name		= "l4_per1",
-	.class		= &dra7xx_l4_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER_L4_PER1_CLKCTRL_OFFSET,
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
 /* l4_per2 */
 static struct omap_hwmod dra7xx_l4_per2_hwmod = {
 	.name		= "l4_per2",
@@ -270,14 +257,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_cfg = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> l4_per1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per1 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_l4_per1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> l4_per2 */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per2 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -348,7 +327,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__l3_main_2,
 	&dra7xx_l4_cfg__l3_main_2,
 	&dra7xx_l3_main_1__l4_cfg,
-	&dra7xx_l3_main_1__l4_per1,
 	&dra7xx_l3_main_1__l4_per2,
 	&dra7xx_l3_main_1__l4_per3,
 	&dra7xx_l4_per2__atl,
-- 
2.30.0

[PATCH 08/12] ARM: OMAP2+: Drop legacy platform data for dra7 l4_per2

[Tony Lindgren]

We can now probe interconnects with simple-pm-bus and genpd.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 75 +----------------------
 1 file changed, 1 insertion(+), 74 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -81,7 +81,7 @@ static struct omap_hwmod dra7xx_l3_main_2_hwmod = {
 
 /*
  * 'l4' class
- * instance(s): l4_cfg, l4_per2, l4_per3
+ * instance(s): l4_cfg, l4_per3
  */
 static struct omap_hwmod_class dra7xx_l4_hwmod_class = {
 	.name	= "l4",
@@ -100,19 +100,6 @@ static struct omap_hwmod dra7xx_l4_cfg_hwmod = {
 	},
 };
 
-/* l4_per2 */
-static struct omap_hwmod dra7xx_l4_per2_hwmod = {
-	.name		= "l4_per2",
-	.class		= &dra7xx_l4_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER2_L4_PER2_CLKCTRL_OFFSET,
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
 /* l4_per3 */
 static struct omap_hwmod dra7xx_l4_per3_hwmod = {
 	.name		= "l4_per3",
@@ -126,30 +113,6 @@ static struct omap_hwmod dra7xx_l4_per3_hwmod = {
 	},
 };
 
-/*
- * 'atl' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_atl_hwmod_class = {
-	.name	= "atl",
-};
-
-/* atl */
-static struct omap_hwmod dra7xx_atl_hwmod = {
-	.name		= "atl",
-	.class		= &dra7xx_atl_hwmod_class,
-	.clkdm_name	= "atl_clkdm",
-	.main_clk	= "atl_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_ATL_ATL_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_ATL_ATL_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /*
  * 'bb2d' class
  *
@@ -257,14 +220,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_cfg = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> l4_per2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per2 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_l4_per2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> l4_per3 */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per3 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -273,14 +228,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_per2 -> atl */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__atl = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_atl_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> bb2d */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__bb2d = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -297,14 +244,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_per2 -> vcp1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp1 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_vcp1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> vcp2 */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp2 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -313,28 +252,16 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_per2 -> vcp2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp2 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_vcp2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_2__l3_instr,
 	&dra7xx_l4_cfg__l3_main_1,
 	&dra7xx_l3_main_1__l3_main_2,
 	&dra7xx_l4_cfg__l3_main_2,
 	&dra7xx_l3_main_1__l4_cfg,
-	&dra7xx_l3_main_1__l4_per2,
 	&dra7xx_l3_main_1__l4_per3,
-	&dra7xx_l4_per2__atl,
 	&dra7xx_l3_main_1__bb2d,
 	&dra7xx_l3_main_1__vcp1,
-	&dra7xx_l4_per2__vcp1,
 	&dra7xx_l3_main_1__vcp2,
-	&dra7xx_l4_per2__vcp2,
 	NULL,
 };
 
-- 
2.30.0

[PATCH 09/12] ARM: OMAP2+: Drop legacy platform data for dra7 l4_per3

[Tony Lindgren]

We can now probe interconnects with simple-pm-bus and genpd.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 24 +----------------------
 1 file changed, 1 insertion(+), 23 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -81,7 +81,7 @@ static struct omap_hwmod dra7xx_l3_main_2_hwmod = {
 
 /*
  * 'l4' class
- * instance(s): l4_cfg, l4_per3
+ * instance(s): l4_cfg
  */
 static struct omap_hwmod_class dra7xx_l4_hwmod_class = {
 	.name	= "l4",
@@ -100,19 +100,6 @@ static struct omap_hwmod dra7xx_l4_cfg_hwmod = {
 	},
 };
 
-/* l4_per3 */
-static struct omap_hwmod dra7xx_l4_per3_hwmod = {
-	.name		= "l4_per3",
-	.class		= &dra7xx_l4_hwmod_class,
-	.clkdm_name	= "l4per3_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER3_L4_PER3_CLKCTRL_OFFSET,
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
 /*
  * 'bb2d' class
  *
@@ -220,14 +207,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_cfg = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> l4_per3 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per3 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_l4_per3_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> bb2d */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__bb2d = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -258,7 +237,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__l3_main_2,
 	&dra7xx_l4_cfg__l3_main_2,
 	&dra7xx_l3_main_1__l4_cfg,
-	&dra7xx_l3_main_1__l4_per3,
 	&dra7xx_l3_main_1__bb2d,
 	&dra7xx_l3_main_1__vcp1,
 	&dra7xx_l3_main_1__vcp2,
-- 
2.30.0

[PATCH 10/12] ARM: OMAP2+: Drop legacy platform data for dra7 l4_cfg

[Tony Lindgren]

We can now probe interconnects with simple-pm-bus and genpd.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 48 -----------------------
 1 file changed, 48 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -79,27 +79,6 @@ static struct omap_hwmod dra7xx_l3_main_2_hwmod = {
 	},
 };
 
-/*
- * 'l4' class
- * instance(s): l4_cfg
- */
-static struct omap_hwmod_class dra7xx_l4_hwmod_class = {
-	.name	= "l4",
-};
-
-/* l4_cfg */
-static struct omap_hwmod dra7xx_l4_cfg_hwmod = {
-	.name		= "l4_cfg",
-	.class		= &dra7xx_l4_hwmod_class,
-	.clkdm_name	= "l4cfg_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
-		},
-	},
-};
-
 /*
  * 'bb2d' class
  *
@@ -175,14 +154,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_2__l3_instr = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> l3_main_1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_1 = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_l3_main_1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> l3_main_2 */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l3_main_2 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -191,22 +162,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l3_main_2 = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l4_cfg -> l3_main_2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_2 = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_l3_main_2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_cfg */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_cfg = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_l4_cfg_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> bb2d */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__bb2d = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -233,10 +188,7 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp2 = {
 
 static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_2__l3_instr,
-	&dra7xx_l4_cfg__l3_main_1,
 	&dra7xx_l3_main_1__l3_main_2,
-	&dra7xx_l4_cfg__l3_main_2,
-	&dra7xx_l3_main_1__l4_cfg,
 	&dra7xx_l3_main_1__bb2d,
 	&dra7xx_l3_main_1__vcp1,
 	&dra7xx_l3_main_1__vcp2,
-- 
2.30.0

[PATCH 11/12] ARM: OMAP2+: Drop legacy platform data for dra7 l3

[Tony Lindgren]

We can now probe interconnects with simple-pm-bus and genpd.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 162 ----------------------
 1 file changed, 162 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -26,172 +26,10 @@
 /* Base offset for all DRA7XX interrupts external to MPUSS */
 #define DRA7XX_IRQ_GIC_START	32
 
-/*
- * IP blocks
- */
-
-/*
- * 'l3' class
- * instance(s): l3_instr, l3_main_1, l3_main_2
- */
-static struct omap_hwmod_class dra7xx_l3_hwmod_class = {
-	.name	= "l3",
-};
-
-/* l3_instr */
-static struct omap_hwmod dra7xx_l3_instr_hwmod = {
-	.name		= "l3_instr",
-	.class		= &dra7xx_l3_hwmod_class,
-	.clkdm_name	= "l3instr_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* l3_main_1 */
-static struct omap_hwmod dra7xx_l3_main_1_hwmod = {
-	.name		= "l3_main_1",
-	.class		= &dra7xx_l3_hwmod_class,
-	.clkdm_name	= "l3main1_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* l3_main_2 */
-static struct omap_hwmod dra7xx_l3_main_2_hwmod = {
-	.name		= "l3_main_2",
-	.class		= &dra7xx_l3_hwmod_class,
-	.clkdm_name	= "l3instr_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INSTR_L3_MAIN_2_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INSTR_L3_MAIN_2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
- * 'bb2d' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_bb2d_hwmod_class = {
-	.name	= "bb2d",
-};
-
-/* bb2d */
-static struct omap_hwmod dra7xx_bb2d_hwmod = {
-	.name		= "bb2d",
-	.class		= &dra7xx_bb2d_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.main_clk	= "dpll_core_h24x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_DSS_BB2D_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_DSS_BB2D_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'vcp' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_vcp_hwmod_class = {
-	.name	= "vcp",
-};
-
-/* vcp1 */
-static struct omap_hwmod dra7xx_vcp1_hwmod = {
-	.name		= "vcp1",
-	.class		= &dra7xx_vcp_hwmod_class,
-	.clkdm_name	= "l3main1_clkdm",
-	.main_clk	= "l3_iclk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP1_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3MAIN1_VCP1_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* vcp2 */
-static struct omap_hwmod dra7xx_vcp2_hwmod = {
-	.name		= "vcp2",
-	.class		= &dra7xx_vcp_hwmod_class,
-	.clkdm_name	= "l3main1_clkdm",
-	.main_clk	= "l3_iclk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP2_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3MAIN1_VCP2_CONTEXT_OFFSET,
-		},
-	},
-};
-
-
-
 /*
  * Interfaces
  */
-
-/* l3_main_2 -> l3_instr */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_2__l3_instr = {
-	.master		= &dra7xx_l3_main_2_hwmod,
-	.slave		= &dra7xx_l3_instr_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l3_main_2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l3_main_2 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_l3_main_2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_1 -> bb2d */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__bb2d = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_bb2d_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> vcp1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_vcp1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> vcp2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp2 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_vcp2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
-	&dra7xx_l3_main_2__l3_instr,
-	&dra7xx_l3_main_1__l3_main_2,
-	&dra7xx_l3_main_1__bb2d,
-	&dra7xx_l3_main_1__vcp1,
-	&dra7xx_l3_main_1__vcp2,
 	NULL,
 };
 
-- 
2.30.0

[PATCH 12/12] ARM: OMAP2+: Drop legacy platform data for dra7 hwmod

[Tony Lindgren]

We can now probe interconnects with simple-pm-bus and genpd.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig               |  1 -
 arch/arm/mach-omap2/Makefile              |  1 -
 arch/arm/mach-omap2/io.c                  |  2 -
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 64 -----------------------
 4 files changed, 68 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/omap_hwmod_7xx_data.c

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -90,7 +90,6 @@ config SOC_DRA7XX
 	select HAVE_ARM_ARCH_TIMER
 	select IRQ_CROSSBAR
 	select ARM_ERRATA_798181 if SMP
-	select OMAP_HWMOD
 	select OMAP_INTERCONNECT
 	select OMAP_INTERCONNECT_BARRIER
 	select PM_OPP
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -209,7 +209,6 @@ obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 obj-$(CONFIG_SOC_TI81XX)		+= omap_hwmod_81xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap_hwmod_54xx_data.o
-obj-$(CONFIG_SOC_DRA7XX)		+= omap_hwmod_7xx_data.o
 
 # OMAP2420 MSDI controller integration support ("MMC")
 obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -667,8 +667,6 @@ void __init dra7xx_init_early(void)
 	dra7xxx_check_revision();
 	dra7xx_powerdomains_init();
 	dra7xx_clockdomains_init();
-	dra7xx_hwmod_init();
-	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = dra7xx_dt_clk_init;
 	omap_secure_init();
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
deleted file mode 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware modules present on the DRA7xx chips
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
- *
- * Paul Walmsley
- * Benoit Cousson
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- */
-
-#include <linux/io.h>
-
-#include "omap_hwmod.h"
-#include "omap_hwmod_common_data.h"
-#include "cm1_7xx.h"
-#include "cm2_7xx.h"
-#include "prm7xx.h"
-#include "soc.h"
-
-/* Base offset for all DRA7XX interrupts external to MPUSS */
-#define DRA7XX_IRQ_GIC_START	32
-
-/*
- * Interfaces
- */
-static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
-	NULL,
-};
-
-/* SoC variant specific hwmod links */
-static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = {
-	NULL,
-};
-
-static struct omap_hwmod_ocp_if *rtc_hwmod_ocp_ifs[] __initdata = {
-	NULL,
-};
-
-int __init dra7xx_hwmod_init(void)
-{
-	int ret;
-
-	omap_hwmod_init();
-	ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
-
-	if (!ret && soc_is_dra74x()) {
-		ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
-	} else if (!ret && soc_is_dra72x()) {
-		ret = omap_hwmod_register_links(dra72x_hwmod_ocp_ifs);
-		if (!ret && !of_machine_is_compatible("ti,dra718"))
-			ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
-	} else if (!ret && soc_is_dra76x()) {
-		if (!ret && soc_is_dra76x_abz())
-			ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
-	}
-
-	return ret;
-}
-- 
2.30.0