[PATCH 0/9] Drop legacy data for omap5

[PATCH 0/9] Drop legacy data for omap5

[Tony Lindgren]

Hi all,

Here are the changes to drop legacy data for omap5 as we can now boot with
devicetree data using genpd and simple-pm-bus.

These patches are against v5.12-rc2, and depend on the following series of
patches:

[PATCH 00/11] Update omap5 dts files to probe with genpd

Regards,

Tony

Tony Lindgren (9):
  ARM: OMAP2+: Drop legacy platform data for omap5 dmm
  ARM: OMAP2+: Drop legacy platform data for omap5 emif
  ARM: OMAP2+: Drop legacy platform data for omap5 mpu
  ARM: OMAP2+: Drop legacy platform data for omap5 sata
  ARM: OMAP2+: Drop legacy platform data for omap5 l4_wkup
  ARM: OMAP2+: Drop legacy platform data for omap5 l4_per
  ARM: OMAP2+: Drop legacy platform data for omap5 l4_cfg
  ARM: OMAP2+: Drop legacy platform data for omap5 l3
  ARM: OMAP2+: Drop legacy platform data for omap5 hwmod

 arch/arm/boot/dts/omap5.dtsi               |   4 -
 arch/arm/mach-omap2/Kconfig                |   1 -
 arch/arm/mach-omap2/Makefile               |   1 -
 arch/arm/mach-omap2/io.c                   |   2 -
 arch/arm/mach-omap2/omap_hwmod.h           |   1 -
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 467 ---------------------
 6 files changed, 476 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/omap_hwmod_54xx_data.c

-- 
2.30.1

[PATCH 1/9] ARM: OMAP2+: Drop legacy platform data for omap5 dmm

[Tony Lindgren]

We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.

As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap5.dtsi               |  1 -
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 30 ----------------------
 2 files changed, 31 deletions(-)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -279,7 +279,6 @@ ipu: ipu@55020000 {
 
 		target-module@4e000000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "dmm";
 			reg = <0x4e000000 0x4>,
 			      <0x4e000010 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -30,27 +30,6 @@
  * IP blocks
  */
 
-/*
- * 'dmm' class
- * instance(s): dmm
- */
-static struct omap_hwmod_class omap54xx_dmm_hwmod_class = {
-	.name	= "dmm",
-};
-
-/* dmm */
-static struct omap_hwmod omap54xx_dmm_hwmod = {
-	.name		= "dmm",
-	.class		= &omap54xx_dmm_hwmod_class,
-	.clkdm_name	= "emif_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_EMIF_DMM_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_EMIF_DMM_CONTEXT_OFFSET,
-		},
-	},
-};
-
 /*
  * 'l3' class
  * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3
@@ -302,14 +281,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__sata = {
  * Interfaces
  */
 
-/* l3_main_1 -> dmm */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__dmm = {
-	.master		= &omap54xx_l3_main_1_hwmod,
-	.slave		= &omap54xx_dmm_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_SDMA,
-};
-
 /* l3_main_3 -> l3_instr */
 static struct omap_hwmod_ocp_if omap54xx_l3_main_3__l3_instr = {
 	.master		= &omap54xx_l3_main_3_hwmod,
@@ -439,7 +410,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
 };
 
 static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
-	&omap54xx_l3_main_1__dmm,
 	&omap54xx_l3_main_3__l3_instr,
 	&omap54xx_l3_main_2__l3_main_1,
 	&omap54xx_l4_cfg__l3_main_1,
-- 
2.30.1

[PATCH 2/9] ARM: OMAP2+: Drop legacy platform data for omap5 emif

[Tony Lindgren]

We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.

As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap5.dtsi               |  2 -
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 67 ----------------------
 2 files changed, 69 deletions(-)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -298,7 +298,6 @@ dmm@0 {
 
 		target-module@4c000000 {
 			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			ti,hwmods = "emif1";
 			reg = <0x4c000000 0x4>;
 			reg-names = "rev";
 			clocks = <&emif_clkctrl OMAP5_EMIF1_CLKCTRL 0>;
@@ -321,7 +320,6 @@ emif1: emif@0 {
 
 		target-module@4d000000 {
 			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			ti,hwmods = "emif2";
 			reg = <0x4d000000 0x4>;
 			reg-names = "rev";
 			clocks = <&emif_clkctrl OMAP5_EMIF2_CLKCTRL 0>;
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -159,55 +159,6 @@ static struct omap_hwmod omap54xx_mpu_private_hwmod = {
 	},
 };
 
-/*
- * 'emif' class
- * external memory interface no1 (wrapper)
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_emif_sysc = {
-	.rev_offs	= 0x0000,
-};
-
-static struct omap_hwmod_class omap54xx_emif_hwmod_class = {
-	.name	= "emif",
-	.sysc	= &omap54xx_emif_sysc,
-};
-
-/* emif1 */
-static struct omap_hwmod omap54xx_emif1_hwmod = {
-	.name		= "emif1",
-	.class		= &omap54xx_emif_hwmod_class,
-	.clkdm_name	= "emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE,
-	.main_clk	= "dpll_core_h11x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_EMIF_EMIF1_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_EMIF_EMIF1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* emif2 */
-static struct omap_hwmod omap54xx_emif2_hwmod = {
-	.name		= "emif2",
-	.class		= &omap54xx_emif_hwmod_class,
-	.clkdm_name	= "emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE,
-	.main_clk	= "dpll_core_h11x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_EMIF_EMIF2_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_EMIF_EMIF2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-
-
-
 /*
  * 'mpu' class
  * mpu sub-system
@@ -385,22 +336,6 @@ static struct omap_hwmod_ocp_if omap54xx_mpu__mpu_private = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* mpu -> emif1 */
-static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = {
-	.master		= &omap54xx_mpu_hwmod,
-	.slave		= &omap54xx_emif1_hwmod,
-	.clk		= "dpll_core_h11x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> emif2 */
-static struct omap_hwmod_ocp_if omap54xx_mpu__emif2 = {
-	.master		= &omap54xx_mpu_hwmod,
-	.slave		= &omap54xx_emif2_hwmod,
-	.clk		= "dpll_core_h11x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_cfg -> mpu */
 static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
 	.master		= &omap54xx_l4_cfg_hwmod,
@@ -423,8 +358,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l3_main_2__l4_per,
 	&omap54xx_l3_main_1__l4_wkup,
 	&omap54xx_mpu__mpu_private,
-	&omap54xx_mpu__emif1,
-	&omap54xx_mpu__emif2,
 	&omap54xx_l4_cfg__mpu,
 	&omap54xx_l4_cfg__sata,
 	NULL,
-- 
2.30.1

[PATCH 3/9] ARM: OMAP2+: Drop legacy platform data for omap5 mpu

[Tony Lindgren]

We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.

As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 71 ----------------------
 1 file changed, 71 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -139,50 +139,6 @@ static struct omap_hwmod omap54xx_l4_wkup_hwmod = {
 	},
 };
 
-/*
- * 'mpu_bus' class
- * instance(s): mpu_private
- */
-static struct omap_hwmod_class omap54xx_mpu_bus_hwmod_class = {
-	.name	= "mpu_bus",
-};
-
-/* mpu_private */
-static struct omap_hwmod omap54xx_mpu_private_hwmod = {
-	.name		= "mpu_private",
-	.class		= &omap54xx_mpu_bus_hwmod_class,
-	.clkdm_name	= "mpu_clkdm",
-	.prcm = {
-		.omap4 = {
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/*
- * 'mpu' class
- * mpu sub-system
- */
-
-static struct omap_hwmod_class omap54xx_mpu_hwmod_class = {
-	.name	= "mpu",
-};
-
-/* mpu */
-static struct omap_hwmod omap54xx_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &omap54xx_mpu_hwmod_class,
-	.clkdm_name	= "mpu_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE,
-	.main_clk	= "dpll_mpu_m2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_MPU_MPU_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_MPU_MPU_CONTEXT_OFFSET,
-		},
-	},
-};
-
 /*
  * 'sata' class
  * sata:  serial ata interface  gen2 compliant   ( 1 rx/ 1 tx)
@@ -256,14 +212,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_1 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* mpu -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap54xx_mpu__l3_main_1 = {
-	.master		= &omap54xx_mpu_hwmod,
-	.slave		= &omap54xx_l3_main_1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3_main_1 -> l3_main_2 */
 static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_2 = {
 	.master		= &omap54xx_l3_main_1_hwmod,
@@ -328,27 +276,10 @@ static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_wkup = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* mpu -> mpu_private */
-static struct omap_hwmod_ocp_if omap54xx_mpu__mpu_private = {
-	.master		= &omap54xx_mpu_hwmod,
-	.slave		= &omap54xx_mpu_private_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> mpu */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_mpu_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l3_main_3__l3_instr,
 	&omap54xx_l3_main_2__l3_main_1,
 	&omap54xx_l4_cfg__l3_main_1,
-	&omap54xx_mpu__l3_main_1,
 	&omap54xx_l3_main_1__l3_main_2,
 	&omap54xx_l4_cfg__l3_main_2,
 	&omap54xx_l3_main_1__l3_main_3,
@@ -357,8 +288,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l3_main_1__l4_cfg,
 	&omap54xx_l3_main_2__l4_per,
 	&omap54xx_l3_main_1__l4_wkup,
-	&omap54xx_mpu__mpu_private,
-	&omap54xx_l4_cfg__mpu,
 	&omap54xx_l4_cfg__sata,
 	NULL,
 };
-- 
2.30.1

[PATCH 4/9] ARM: OMAP2+: Drop legacy platform data for omap5 sata

[Tony Lindgren]

We can now probe devices with ti-sysc interconnect driver and dts data.
Let's drop the related platform data and custom ti,hwmods dts property.

As we're just dropping data, and the early platform data init is based on
the custom ti,hwmods property, we want to drop both the platform data and
ti,hwmods property in a single patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 46 ----------------------
 1 file changed, 46 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -139,51 +139,6 @@ static struct omap_hwmod omap54xx_l4_wkup_hwmod = {
 	},
 };
 
-/*
- * 'sata' class
- * sata:  serial ata interface  gen2 compliant   ( 1 rx/ 1 tx)
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_sata_sysc = {
-	.rev_offs	= 0x00fc,
-	.sysc_offs	= 0x0000,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_sata_hwmod_class = {
-	.name	= "sata",
-	.sysc	= &omap54xx_sata_sysc,
-};
-
-/* sata */
-static struct omap_hwmod omap54xx_sata_hwmod = {
-	.name		= "sata",
-	.class		= &omap54xx_sata_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "func_48m_fclk",
-	.mpu_rt_idx	= 1,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INIT_SATA_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* l4_cfg -> sata */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__sata = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_sata_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /*
  * Interfaces
  */
@@ -288,7 +243,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l3_main_1__l4_cfg,
 	&omap54xx_l3_main_2__l4_per,
 	&omap54xx_l3_main_1__l4_wkup,
-	&omap54xx_l4_cfg__sata,
 	NULL,
 };
 
-- 
2.30.1

[PATCH 5/9] ARM: OMAP2+: Drop legacy platform data for omap5 l4_wkup

[Tony Lindgren]

We can now probe interconnects with simple-pm-bus and genpd.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 24 +---------------------
 1 file changed, 1 insertion(+), 23 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -94,7 +94,7 @@ static struct omap_hwmod omap54xx_l3_main_3_hwmod = {
 
 /*
  * 'l4' class
- * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup
+ * instance(s): l4_abe, l4_cfg, l4_per
  */
 static struct omap_hwmod_class omap54xx_l4_hwmod_class = {
 	.name	= "l4",
@@ -126,19 +126,6 @@ static struct omap_hwmod omap54xx_l4_per_hwmod = {
 	},
 };
 
-/* l4_wkup */
-static struct omap_hwmod omap54xx_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &omap54xx_l4_hwmod_class,
-	.clkdm_name	= "wkupaon_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET,
-		},
-	},
-};
-
 /*
  * Interfaces
  */
@@ -223,14 +210,6 @@ static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l4_per = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> l4_wkup */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_wkup = {
-	.master		= &omap54xx_l3_main_1_hwmod,
-	.slave		= &omap54xx_l4_wkup_hwmod,
-	.clk		= "wkupaon_iclk_mux",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l3_main_3__l3_instr,
 	&omap54xx_l3_main_2__l3_main_1,
@@ -242,7 +221,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_cfg__l3_main_3,
 	&omap54xx_l3_main_1__l4_cfg,
 	&omap54xx_l3_main_2__l4_per,
-	&omap54xx_l3_main_1__l4_wkup,
 	NULL,
 };
 
-- 
2.30.1

[PATCH 6/9] ARM: OMAP2+: Drop legacy platform data for omap5 l4_per

[Tony Lindgren]

We can now probe interconnects with simple-pm-bus and genpd.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 24 +---------------------
 1 file changed, 1 insertion(+), 23 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -94,7 +94,7 @@ static struct omap_hwmod omap54xx_l3_main_3_hwmod = {
 
 /*
  * 'l4' class
- * instance(s): l4_abe, l4_cfg, l4_per
+ * instance(s): l4_abe, l4_cfg
  */
 static struct omap_hwmod_class omap54xx_l4_hwmod_class = {
 	.name	= "l4",
@@ -113,19 +113,6 @@ static struct omap_hwmod omap54xx_l4_cfg_hwmod = {
 	},
 };
 
-/* l4_per */
-static struct omap_hwmod omap54xx_l4_per_hwmod = {
-	.name		= "l4_per",
-	.class		= &omap54xx_l4_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L4PER_L4_PER_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L4PER_L4_PER_CONTEXT_OFFSET,
-		},
-	},
-};
-
 /*
  * Interfaces
  */
@@ -202,14 +189,6 @@ static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_cfg = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_2 -> l4_per */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l4_per = {
-	.master		= &omap54xx_l3_main_2_hwmod,
-	.slave		= &omap54xx_l4_per_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l3_main_3__l3_instr,
 	&omap54xx_l3_main_2__l3_main_1,
@@ -220,7 +199,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l3_main_2__l3_main_3,
 	&omap54xx_l4_cfg__l3_main_3,
 	&omap54xx_l3_main_1__l4_cfg,
-	&omap54xx_l3_main_2__l4_per,
 	NULL,
 };
 
-- 
2.30.1

[PATCH 7/9] ARM: OMAP2+: Drop legacy platform data for omap5 l4_cfg

[Tony Lindgren]

We can now probe interconnects with simple-pm-bus and genpd.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 58 ----------------------
 1 file changed, 58 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -92,27 +92,6 @@ static struct omap_hwmod omap54xx_l3_main_3_hwmod = {
 	},
 };
 
-/*
- * 'l4' class
- * instance(s): l4_abe, l4_cfg
- */
-static struct omap_hwmod_class omap54xx_l4_hwmod_class = {
-	.name	= "l4",
-};
-
-/* l4_cfg */
-static struct omap_hwmod omap54xx_l4_cfg_hwmod = {
-	.name		= "l4_cfg",
-	.class		= &omap54xx_l4_hwmod_class,
-	.clkdm_name	= "l4cfg_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
-		},
-	},
-};
-
 /*
  * Interfaces
  */
@@ -133,14 +112,6 @@ static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_1 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_1 = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_l3_main_1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> l3_main_2 */
 static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_2 = {
 	.master		= &omap54xx_l3_main_1_hwmod,
@@ -149,15 +120,6 @@ static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_2 = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l4_cfg -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_2 = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_l3_main_2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l3_main_3 */
 static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_3 = {
 	.master		= &omap54xx_l3_main_1_hwmod,
 	.slave		= &omap54xx_l3_main_3_hwmod,
@@ -173,32 +135,12 @@ static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_3 = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_l3_main_3_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_cfg */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_cfg = {
-	.master		= &omap54xx_l3_main_1_hwmod,
-	.slave		= &omap54xx_l4_cfg_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l3_main_3__l3_instr,
 	&omap54xx_l3_main_2__l3_main_1,
-	&omap54xx_l4_cfg__l3_main_1,
 	&omap54xx_l3_main_1__l3_main_2,
-	&omap54xx_l4_cfg__l3_main_2,
 	&omap54xx_l3_main_1__l3_main_3,
 	&omap54xx_l3_main_2__l3_main_3,
-	&omap54xx_l4_cfg__l3_main_3,
-	&omap54xx_l3_main_1__l4_cfg,
 	NULL,
 };
 
-- 
2.30.1

[PATCH 8/9] ARM: OMAP2+: Drop legacy platform data for omap5 l3

[Tony Lindgren]

We can now probe interconnects with simple-pm-bus and genpd.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap5.dtsi               |   1 -
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 114 ---------------------
 2 files changed, 115 deletions(-)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -151,7 +151,6 @@ ocp {
 		#size-cells = <1>;
 		ranges = <0 0 0 0xc0000000>;
 		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
-		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
 		l3-noc@44000000 {
 			compatible = "ti,omap5-l3-noc";
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -26,121 +26,7 @@
 /* Base offset for all OMAP5 interrupts external to MPUSS */
 #define OMAP54XX_IRQ_GIC_START	32
 
-/*
- * IP blocks
- */
-
-/*
- * 'l3' class
- * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3
- */
-static struct omap_hwmod_class omap54xx_l3_hwmod_class = {
-	.name	= "l3",
-};
-
-/* l3_instr */
-static struct omap_hwmod omap54xx_l3_instr_hwmod = {
-	.name		= "l3_instr",
-	.class		= &omap54xx_l3_hwmod_class,
-	.clkdm_name	= "l3instr_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* l3_main_1 */
-static struct omap_hwmod omap54xx_l3_main_1_hwmod = {
-	.name		= "l3_main_1",
-	.class		= &omap54xx_l3_hwmod_class,
-	.clkdm_name	= "l3main1_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* l3_main_2 */
-static struct omap_hwmod omap54xx_l3_main_2_hwmod = {
-	.name		= "l3_main_2",
-	.class		= &omap54xx_l3_hwmod_class,
-	.clkdm_name	= "l3main2_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3MAIN2_L3_MAIN_2_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3MAIN2_L3_MAIN_2_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* l3_main_3 */
-static struct omap_hwmod omap54xx_l3_main_3_hwmod = {
-	.name		= "l3_main_3",
-	.class		= &omap54xx_l3_hwmod_class,
-	.clkdm_name	= "l3instr_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INSTR_L3_MAIN_3_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INSTR_L3_MAIN_3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
- * Interfaces
- */
-
-/* l3_main_3 -> l3_instr */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_3__l3_instr = {
-	.master		= &omap54xx_l3_main_3_hwmod,
-	.slave		= &omap54xx_l3_instr_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_1 = {
-	.master		= &omap54xx_l3_main_2_hwmod,
-	.slave		= &omap54xx_l3_main_1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_2 = {
-	.master		= &omap54xx_l3_main_1_hwmod,
-	.slave		= &omap54xx_l3_main_2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_3 = {
-	.master		= &omap54xx_l3_main_1_hwmod,
-	.slave		= &omap54xx_l3_main_3_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_2 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_3 = {
-	.master		= &omap54xx_l3_main_2_hwmod,
-	.slave		= &omap54xx_l3_main_3_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
-	&omap54xx_l3_main_3__l3_instr,
-	&omap54xx_l3_main_2__l3_main_1,
-	&omap54xx_l3_main_1__l3_main_2,
-	&omap54xx_l3_main_1__l3_main_3,
-	&omap54xx_l3_main_2__l3_main_3,
 	NULL,
 };
 
-- 
2.30.1

[PATCH 9/9] ARM: OMAP2+: Drop legacy platform data for omap5 hwmod

[Tony Lindgren]

We can now probe interconnects with simple-pm-bus and genpd.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig                |  1 -
 arch/arm/mach-omap2/Makefile               |  1 -
 arch/arm/mach-omap2/io.c                   |  2 --
 arch/arm/mach-omap2/omap_hwmod.h           |  1 -
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 37 ----------------------
 5 files changed, 42 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/omap_hwmod_54xx_data.c

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -54,7 +54,6 @@ config SOC_OMAP5
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP
-	select OMAP_HWMOD
 	select OMAP_INTERCONNECT
 	select OMAP_INTERCONNECT_BARRIER
 	select PM_OPP
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -208,7 +208,6 @@ obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 obj-$(CONFIG_SOC_TI81XX)		+= omap_hwmod_81xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
-obj-$(CONFIG_SOC_OMAP5)			+= omap_hwmod_54xx_data.o
 obj-$(CONFIG_SOC_DRA7XX)		+= omap_hwmod_7xx_data.o
 
 # OMAP2420 MSDI controller integration support ("MMC")
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -643,8 +643,6 @@ void __init omap5_init_early(void)
 	omap54xx_voltagedomains_init();
 	omap54xx_powerdomains_init();
 	omap54xx_clockdomains_init();
-	omap54xx_hwmod_init();
-	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = omap5xxx_dt_clk_init;
 	omap_secure_init();
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -671,7 +671,6 @@ extern int omap2420_hwmod_init(void);
 extern int omap2430_hwmod_init(void);
 extern int omap3xxx_hwmod_init(void);
 extern int omap44xx_hwmod_init(void);
-extern int omap54xx_hwmod_init(void);
 extern int am33xx_hwmod_init(void);
 extern int dm814x_hwmod_init(void);
 extern int dm816x_hwmod_init(void);
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
deleted file mode 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware modules present on the OMAP54xx chips
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
- *
- * Paul Walmsley
- * Benoit Cousson
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- */
-
-#include <linux/io.h>
-#include <linux/power/smartreflex.h>
-
-#include "omap_hwmod.h"
-#include "omap_hwmod_common_data.h"
-#include "cm1_54xx.h"
-#include "cm2_54xx.h"
-#include "prm54xx.h"
-
-/* Base offset for all OMAP5 interrupts external to MPUSS */
-#define OMAP54XX_IRQ_GIC_START	32
-
-static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
-	NULL,
-};
-
-int __init omap54xx_hwmod_init(void)
-{
-	omap_hwmod_init();
-	return omap_hwmod_register_links(omap54xx_hwmod_ocp_ifs);
-}
-- 
2.30.1