linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hanna Hawa <hhhawa@amazon.com>
To: <tony@atomide.com>, <haojian.zhuang@linaro.org>,
	<linus.walleij@linaro.org>
Cc: <dwmw@amazon.co.uk>, <benh@amazon.com>, <ronenk@amazon.com>,
	<talel@amazon.com>, <jonnyc@amazon.com>, <hanochu@amazon.com>,
	<tgershi@amazon.com>, <linux-arm-kernel@lists.infradead.org>,
	<linux-omap@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <hhhawa@amazon.com>
Subject: [PATCH 2/2] pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux != 0
Date: Mon, 15 Mar 2021 16:59:44 +0200	[thread overview]
Message-ID: <20210315145944.20412-3-hhhawa@amazon.com> (raw)
In-Reply-To: <20210315145944.20412-1-hhhawa@amazon.com>

An SError was detected when trying to print the supported pins in a
pinctrl device which supports multiple pins per register. This change
fixes the pcs_pin_dbg_show() in pinctrl-single driver when
bits_per_mux != 0. In addition move offset calculation and pin offset in
register to common function.

Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
---
 drivers/pinctrl/pinctrl-single.c | 66 ++++++++++++++++++++++----------
 1 file changed, 45 insertions(+), 21 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 8a7922459896..0288bf430916 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -270,20 +270,53 @@ static void __maybe_unused pcs_writel(unsigned val, void __iomem *reg)
 	writel(val, reg);
 }
 
+static unsigned int pcs_pin_reg_offset_get(struct pcs_device *pcs,
+					   unsigned int pin)
+{
+	unsigned int offset, mux_bytes;
+
+	mux_bytes = pcs->width / BITS_PER_BYTE;
+
+	if (pcs->bits_per_mux) {
+		unsigned int pin_offset_bytes;
+
+		pin_offset_bytes = (pcs->bits_per_pin * pin) / BITS_PER_BYTE;
+		offset = (pin_offset_bytes / mux_bytes) * mux_bytes;
+	} else {
+		offset = pin * mux_bytes;
+	}
+
+	return offset;
+}
+
+static unsigned int pcs_pin_shift_reg_get(struct pcs_device *pcs,
+					  unsigned int pin)
+{
+	return ((pin % (pcs->width / pcs->bits_per_pin)) * pcs->bits_per_pin);
+}
+
 static void pcs_pin_dbg_show(struct pinctrl_dev *pctldev,
 					struct seq_file *s,
 					unsigned pin)
 {
 	struct pcs_device *pcs;
-	unsigned val, mux_bytes;
+	unsigned int val;
 	unsigned long offset;
 	size_t pa;
 
 	pcs = pinctrl_dev_get_drvdata(pctldev);
 
-	mux_bytes = pcs->width / BITS_PER_BYTE;
-	offset = pin * mux_bytes;
-	val = pcs->read(pcs->base + offset);
+	offset = pcs_pin_reg_offset_get(pcs, pin);
+
+	if (pcs->bits_per_mux) {
+		unsigned int pin_shift_in_reg = pcs_pin_shift_reg_get(pcs, pin);
+
+		val = pcs->read(pcs->base + offset)
+			& (pcs->fmask << pin_shift_in_reg);
+	} else {
+		val = pcs->read(pcs->base + offset);
+	}
+
 	pa = pcs->res->start + offset;
 
 	seq_printf(s, "%zx %08x %s ", pa, val, DRIVER_NAME);
@@ -384,7 +417,6 @@ static int pcs_request_gpio(struct pinctrl_dev *pctldev,
 	struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
 	struct pcs_gpiofunc_range *frange = NULL;
 	struct list_head *pos, *tmp;
-	int mux_bytes = 0;
 	unsigned data;
 
 	/* If function mask is null, return directly. */
@@ -392,29 +424,27 @@ static int pcs_request_gpio(struct pinctrl_dev *pctldev,
 		return -ENOTSUPP;
 
 	list_for_each_safe(pos, tmp, &pcs->gpiofuncs) {
+		u32 offset;
+
 		frange = list_entry(pos, struct pcs_gpiofunc_range, node);
 		if (pin >= frange->offset + frange->npins
 			|| pin < frange->offset)
 			continue;
-		mux_bytes = pcs->width / BITS_PER_BYTE;
 
-		if (pcs->bits_per_mux) {
-			int byte_num, offset, pin_shift;
+		offset = pcs_pin_reg_offset_get(pcs, pin);
 
-			byte_num = (pcs->bits_per_pin * pin) / BITS_PER_BYTE;
-			offset = (byte_num / mux_bytes) * mux_bytes;
-			pin_shift = pin % (pcs->width / pcs->bits_per_pin) *
-				    pcs->bits_per_pin;
+		if (pcs->bits_per_mux) {
+			int pin_shift = pcs_pin_shift_reg_get(pcs, pin);
 
 			data = pcs->read(pcs->base + offset);
 			data &= ~(pcs->fmask << pin_shift);
 			data |= frange->gpiofunc << pin_shift;
 			pcs->write(data, pcs->base + offset);
 		} else {
-			data = pcs->read(pcs->base + pin * mux_bytes);
+			data = pcs->read(pcs->base + offset);
 			data &= ~pcs->fmask;
 			data |= frange->gpiofunc;
-			pcs->write(data, pcs->base + pin * mux_bytes);
+			pcs->write(data, pcs->base + offset);
 		}
 		break;
 	}
@@ -726,14 +756,8 @@ static int pcs_allocate_pin_table(struct pcs_device *pcs)
 	for (i = 0; i < pcs->desc.npins; i++) {
 		unsigned offset;
 		int res;
-		int byte_num;
 
-		if (pcs->bits_per_mux) {
-			byte_num = (pcs->bits_per_pin * i) / BITS_PER_BYTE;
-			offset = (byte_num / mux_bytes) * mux_bytes;
-		} else {
-			offset = i * mux_bytes;
-		}
+		offset = pcs_pin_reg_offset_get(pcs, i);
 		res = pcs_add_pin(pcs, offset);
 		if (res < 0) {
 			dev_err(pcs->dev, "error adding pins: %i\n", res);
-- 
2.17.1


      parent reply	other threads:[~2021-03-15 15:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-15 14:59 [PATCH 0/2] Fix pinctrl-single pcs_pin_dbg_show() Hanna Hawa
2021-03-15 14:59 ` [PATCH 1/2] pinctrl: pinctrl-single: remove unused parameter Hanna Hawa
2021-03-15 14:59 ` Hanna Hawa [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210315145944.20412-3-hhhawa@amazon.com \
    --to=hhhawa@amazon.com \
    --cc=benh@amazon.com \
    --cc=dwmw@amazon.co.uk \
    --cc=hanochu@amazon.com \
    --cc=haojian.zhuang@linaro.org \
    --cc=jonnyc@amazon.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=ronenk@amazon.com \
    --cc=talel@amazon.com \
    --cc=tgershi@amazon.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).