From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-15.7 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,FREEMAIL_FORGED_FROMDOMAIN,FREEMAIL_FROM, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0CB2AC433E6 for ; Thu, 18 Mar 2021 17:28:13 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id D487E64F38 for ; Thu, 18 Mar 2021 17:28:12 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232295AbhCRR1l (ORCPT ); Thu, 18 Mar 2021 13:27:41 -0400 Received: from smtp-17.italiaonline.it ([213.209.10.17]:33852 "EHLO libero.it" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S232273AbhCRR13 (ORCPT ); Thu, 18 Mar 2021 13:27:29 -0400 Received: from passgat-Modern-14-A10M.homenet.telecomitalia.it ([87.20.116.197]) by smtp-17.iol.local with ESMTPA id MwPulsZ9jtpGHMwQelfgnX; Thu, 18 Mar 2021 18:27:28 +0100 x-libjamoibt: 1601 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=libero.it; s=s2021; t=1616088448; bh=KAzK0Sn14NynRb4O2jMCrHzEsmfJ49Hm748NhbwStkg=; h=From; b=ZKDp/hFmcPxkMsuwjlEGHtOcYo5fIcHU3bRbamxu6e9UJbqEgxz6IdG175TKZMFhX qqvSDjRqd3tISW8kWQVWYrXBq0DR6k3PFlP9HcG7l8dk2C7ykYPVwL+KVWZqGzO4q0 Kia6tVU37PJYRdRrqfRfPYxwdTgRti9AXu8PeGbtCMridYxjPVSnHa/wJ8QMOXKpGL jXX9BTDTvS6hkXI1yOXN+BVbvZp/H/af68T0d0qRUm5kTCWOEQL96LciLf5HDn22Np o2G0e5xGclTqz+cg88JEegqDD3/8B8FjbsaqMwWxfZkJdS3Tm/who+FlgxBHGAocp0 TctxuPa7XjTOA== X-CNFS-Analysis: v=2.4 cv=Q7IXX66a c=1 sm=1 tr=0 ts=60538d80 cx=a_exe a=AVqmXbCQpuNSdJmApS5GbQ==:117 a=AVqmXbCQpuNSdJmApS5GbQ==:17 a=IkcTkHD0fZMA:10 a=o_rbLAqdoS-kjYQczG8A:9 a=QEXdDO2ut3YA:10 From: Dario Binacchi To: linux-kernel@vger.kernel.org Cc: Dario Binacchi , Grygorii Strashko , Lee Jones , Michael Turquette , Stephen Boyd , Tero Kristo , linux-clk@vger.kernel.org, linux-omap@vger.kernel.org Subject: [PATCH v2 4/4] clk: ti: add am33xx spread spectrum clock support Date: Thu, 18 Mar 2021 18:26:26 +0100 Message-Id: <20210318172627.12173-5-dariobin@libero.it> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20210318172627.12173-1-dariobin@libero.it> References: <20210318172627.12173-1-dariobin@libero.it> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-CMAE-Envelope: MS4xfF4UgLkQioEkYoNI0qMljm3B9NW3j0O0SdrMLoch+QV4TATGJFF/B8nsonYxxUqTc2IjmPGrpjXbw8Ab/qZD52UNufI8eQh6q+vV7pqK5aN6LnPX7Nas lBE21dUuLqnGpMOIAUjKEzHdZQZGTuEY8jIh4MpIOPcEeLnKogwjZ1o+Wst7kr+FbYXO/fK0+xZ4RXApkUbIUjO4s1efVXCpwcVb1bJyzK+YW0m7bvl+yvEI ZsyT6v44w8ihDo+GwnbeCzIjm7G8hlHAQG+jq2g3umkc+/HHm/hM1xgBIDy2e2DE9VgoE7Ok7kt4JObv0UUNmbt83BFX9sp9NhELi7U2juRWVRCJwzu9bZfN n7d1DNgxglWpoBAM5V/YS9tnourz+Sl8434Jv/pH4oF2hBH3+hN+MoiNkfMgpJ6JF7V7gD3PykSpysy0MQSjMara5Vu9AoF7/+X7ML7YZPIAnK/ca2HyMYsi diLz3pVhoeSBQ1x5E6UjuUYTAPa9Tt5aQnRZEw== Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org The patch enables spread spectrum clocking (SSC) for MPU and LCD PLLs. As reported by the TI spruh73x RM, SSC is only supported for the DISP/LCD and MPU PLLs on am33xx device. SSC is not supported for DDR, PER, and CORE PLLs. Calculating the required values and setting the registers accordingly was taken from the set_mpu_spreadspectrum routine contained in the arch/arm/mach-omap2/am33xx/clock_am33xx.c file of the u-boot project. In locked condition, DPLL output clock = CLKINP *[M/N]. In case of SSC enabled, the AM335x reference manual explains that there is a restriction of range of M values. Since the omap2_dpll_round_rate routine attempts to select the minimum possible N, the value of M obtained is not guaranteed to be within the range required. With the new "ti,min-div" parameter it is possible to increase N and consequently M to satisfy the constraint imposed by SSC. Signed-off-by: Dario Binacchi --- Changes in v2: - Move the DT changes to the previous patch in the series. drivers/clk/ti/dpll.c | 41 +++++++++++++++++++ drivers/clk/ti/dpll3xxx.c | 85 +++++++++++++++++++++++++++++++++++++++ include/linux/clk/ti.h | 24 +++++++++++ 3 files changed, 150 insertions(+) diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index d6f1ac5b53e1..2738417a47b7 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -290,7 +290,9 @@ static void __init of_ti_dpll_setup(struct device_node *node, struct clk_init_data *init = NULL; const char **parent_names = NULL; struct dpll_data *dd = NULL; + int ssc_clk_index; u8 dpll_mode = 0; + u32 min_div; dd = kmemdup(ddt, sizeof(*dd), GFP_KERNEL); clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); @@ -345,6 +347,27 @@ static void __init of_ti_dpll_setup(struct device_node *node, if (dd->autoidle_mask) { if (ti_clk_get_reg_addr(node, 3, &dd->autoidle_reg)) goto cleanup; + + ssc_clk_index = 4; + } else { + ssc_clk_index = 3; + } + + if (dd->ssc_deltam_int_mask && dd->ssc_deltam_frac_mask && + dd->ssc_modfreq_mant_mask && dd->ssc_modfreq_exp_mask) { + if (ti_clk_get_reg_addr(node, ssc_clk_index++, + &dd->ssc_deltam_reg)) + goto cleanup; + + if (ti_clk_get_reg_addr(node, ssc_clk_index++, + &dd->ssc_modfreq_reg)) + goto cleanup; + + of_property_read_u32(node, "ti,ssc-modfreq", &dd->ssc_modfreq); + of_property_read_u32(node, "ti,ssc-deltam", &dd->ssc_deltam); + if (of_property_read_bool(node, "ti,ssc-downspread")) + dd->ssc_downspread = 1; + } if (of_property_read_bool(node, "ti,low-power-stop")) @@ -356,6 +379,10 @@ static void __init of_ti_dpll_setup(struct device_node *node, if (of_property_read_bool(node, "ti,lock")) dpll_mode |= 1 << DPLL_LOCKED; + if (!of_property_read_u32(node, "ti,min-div", &min_div) && + min_div > dd->min_divider) + dd->min_divider = min_div; + if (dpll_mode) dd->modes = dpll_mode; @@ -585,8 +612,15 @@ static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, + .ssc_enable_mask = 0x1 << 12, + .ssc_ack_mask = 0x1 << 13, + .ssc_downspread_mask = 0x1 << 14, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, + .ssc_deltam_int_mask = 0x3 << 18, + .ssc_deltam_frac_mask = 0x3ffff, + .ssc_modfreq_mant_mask = 0x7f, + .ssc_modfreq_exp_mask = 0x7 << 8, .max_multiplier = 2047, .max_divider = 128, .min_divider = 1, @@ -645,8 +679,15 @@ static void __init of_ti_am3_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, + .ssc_enable_mask = 0x1 << 12, + .ssc_ack_mask = 0x1 << 13, + .ssc_downspread_mask = 0x1 << 14, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, + .ssc_deltam_int_mask = 0x3 << 18, + .ssc_deltam_frac_mask = 0x3ffff, + .ssc_modfreq_mant_mask = 0x7f, + .ssc_modfreq_exp_mask = 0x7 << 8, .max_multiplier = 2047, .max_divider = 128, .min_divider = 1, diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c index 94d5b5fe9a2b..e32b3515f9e7 100644 --- a/drivers/clk/ti/dpll3xxx.c +++ b/drivers/clk/ti/dpll3xxx.c @@ -291,6 +291,88 @@ static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n) *sd_div = sd; } +/** + * omap3_noncore_dpll_ssc_program - set spread-spectrum clocking registers + * @clk: struct clk * of DPLL to set + * + * Enable the DPLL spread spectrum clocking if frequency modulation and + * frequency spreading have been set, otherwise disable it. + */ +static void omap3_noncore_dpll_ssc_program(struct clk_hw_omap *clk) +{ + struct dpll_data *dd = clk->dpll_data; + unsigned long ref_rate; + u32 v, ctrl, mod_freq_divider, exponent, mantissa; + u32 deltam_step, deltam_ceil; + + ctrl = ti_clk_ll_ops->clk_readl(&dd->control_reg); + + if (dd->ssc_modfreq && dd->ssc_deltam) { + ctrl |= dd->ssc_enable_mask; + + if (dd->ssc_downspread) + ctrl |= dd->ssc_downspread_mask; + else + ctrl &= ~dd->ssc_downspread_mask; + + ref_rate = clk_hw_get_rate(dd->clk_ref); + mod_freq_divider = + (ref_rate / dd->last_rounded_n) / (4 * dd->ssc_modfreq); + if (dd->ssc_modfreq > (ref_rate / 70)) + pr_warn("clock: SSC modulation frequency of DPLL %s greater than %ld\n", + __clk_get_name(clk->hw.clk), ref_rate / 70); + + exponent = 0; + mantissa = mod_freq_divider; + while ((mantissa > 127) && (exponent < 7)) { + exponent++; + mantissa /= 2; + } + if (mantissa > 127) + mantissa = 127; + + v = ti_clk_ll_ops->clk_readl(&dd->ssc_modfreq_reg); + v &= ~(dd->ssc_modfreq_mant_mask | dd->ssc_modfreq_exp_mask); + v |= mantissa << __ffs(dd->ssc_modfreq_mant_mask); + v |= exponent << __ffs(dd->ssc_modfreq_exp_mask); + ti_clk_ll_ops->clk_writel(v, &dd->ssc_modfreq_reg); + + deltam_step = dd->last_rounded_m * dd->ssc_deltam; + deltam_step /= 10; + if (dd->ssc_downspread) + deltam_step /= 2; + + deltam_step <<= __ffs(dd->ssc_deltam_int_mask); + deltam_step /= 100; + deltam_step /= mod_freq_divider; + if (deltam_step > 0xFFFFF) + deltam_step = 0xFFFFF; + + deltam_ceil = (deltam_step & dd->ssc_deltam_int_mask) >> + __ffs(dd->ssc_deltam_int_mask); + if (deltam_step & dd->ssc_deltam_frac_mask) + deltam_ceil++; + + if ((dd->ssc_downspread && + ((dd->last_rounded_m - (2 * deltam_ceil)) < 20 || + dd->last_rounded_m > 2045)) || + ((dd->last_rounded_m - deltam_ceil) < 20 || + (dd->last_rounded_m + deltam_ceil) > 2045)) + pr_warn("clock: SSC multiplier of DPLL %s is out of range\n", + __clk_get_name(clk->hw.clk)); + + v = ti_clk_ll_ops->clk_readl(&dd->ssc_deltam_reg); + v &= ~(dd->ssc_deltam_int_mask | dd->ssc_deltam_frac_mask); + v |= deltam_step << __ffs(dd->ssc_deltam_int_mask | + dd->ssc_deltam_frac_mask); + ti_clk_ll_ops->clk_writel(v, &dd->ssc_deltam_reg); + } else { + ctrl &= ~dd->ssc_enable_mask; + } + + ti_clk_ll_ops->clk_writel(ctrl, &dd->control_reg); +} + /** * omap3_noncore_dpll_program - set non-core DPLL M,N values directly * @clk: struct clk * of DPLL to set @@ -390,6 +472,9 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) ti_clk_ll_ops->clk_writel(v, &dd->control_reg); } + if (dd->ssc_enable_mask) + omap3_noncore_dpll_ssc_program(clk); + /* We let the clock framework set the other output dividers later */ /* REVISIT: Set ramp-up delay? */ diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index c62f6fa6763d..cba093de62d8 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -63,6 +63,18 @@ struct clk_omap_reg { * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs + * @ssc_deltam_reg: register containing the DPLL SSC frequency spreading + * @ssc_modfreq_reg: register containing the DPLL SSC modulation frequency + * @ssc_modfreq_mant_mask: mask of the mantissa component in @ssc_modfreq_reg + * @ssc_modfreq_exp_mask: mask of the exponent component in @ssc_modfreq_reg + * @ssc_enable_mask: mask of the DPLL SSC enable bit in @control_reg + * @ssc_ack_mask: mask of the DPLL SSC turned on/off bit in @control_reg + * @ssc_downspread_mask: mask of the DPLL SSC low frequency only bit in + * @control_reg + * @ssc_modfreq: the DPLL SSC frequency modulation in kHz + * @ssc_deltam: the DPLL SSC frequency spreading in permille (10th of percent) + * @ssc_downspread: require the only low frequency spread of the DPLL in SSC + * mode * @flags: DPLL type/features (see below) * * Possible values for @flags: @@ -110,6 +122,18 @@ struct dpll_data { u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; + struct clk_omap_reg ssc_deltam_reg; + struct clk_omap_reg ssc_modfreq_reg; + u32 ssc_deltam_int_mask; + u32 ssc_deltam_frac_mask; + u32 ssc_modfreq_mant_mask; + u32 ssc_modfreq_exp_mask; + u32 ssc_enable_mask; + u32 ssc_ack_mask; + u32 ssc_downspread_mask; + u32 ssc_modfreq; + u32 ssc_deltam; + u8 ssc_downspread; u8 flags; }; -- 2.17.1