linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Tobias Waldekranz <tobias@waldekranz.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Roopa Prabhu <roopa@nvidia.com>,
	Nikolay Aleksandrov <nikolay@nvidia.com>,
	Jiri Pirko <jiri@resnulli.us>, Ido Schimmel <idosch@idosch.org>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	UNGLinuxDriver@microchip.com, Vadym Kochan <vkochan@marvell.com>,
	Taras Chornyi <tchornyi@marvell.com>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Ioana Ciornei <ioana.ciornei@nxp.com>,
	Ivan Vecera <ivecera@redhat.com>,
	linux-omap@vger.kernel.org,
	Vladimir Oltean <vladimir.oltean@nxp.com>
Subject: Re: [RFC PATCH v2 net-next 08/16] net: dsa: replay port and host-joined mdb entries when joining the bridge
Date: Sat, 20 Mar 2021 11:53:11 +0200	[thread overview]
Message-ID: <20210320095311.noojqngoyobuntej@skbuf> (raw)
In-Reply-To: <eb155de5-73b7-1c27-20e9-0177dedfd985@gmail.com>

On Fri, Mar 19, 2021 at 03:20:38PM -0700, Florian Fainelli wrote:
>
>
> On 3/18/2021 4:18 PM, Vladimir Oltean wrote:
> > From: Vladimir Oltean <vladimir.oltean@nxp.com>
> >
> > I have udhcpcd in my system and this is configured to bring interfaces
> > up as soon as they are created.
> >
> > I create a bridge as follows:
> >
> > ip link add br0 type bridge
> >
> > As soon as I create the bridge and udhcpcd brings it up, I have some
> > other crap (avahi)
>
> How dare you ;)

Well, it comes preinstalled on my system, I don't need it, and it has
caused me nothing but trouble. So I think it has earned its title :D

> > that starts sending some random IPv6 packets to
> > advertise some local services, and from there, the br0 bridge joins the
> > following IPv6 groups:
> >
> > 33:33:ff:6d:c1:9c vid 0
> > 33:33:00:00:00:6a vid 0
> > 33:33:00:00:00:fb vid 0
> >
> > br_dev_xmit
> > -> br_multicast_rcv
> >    -> br_ip6_multicast_add_group
> >       -> __br_multicast_add_group
> >          -> br_multicast_host_join
> >             -> br_mdb_notify
> >
> > This is all fine, but inside br_mdb_notify we have br_mdb_switchdev_host
> > hooked up, and switchdev will attempt to offload the host joined groups
> > to an empty list of ports. Of course nobody offloads them.
> >
> > Then when we add a port to br0:
> >
> > ip link set swp0 master br0
> >
> > the bridge doesn't replay the host-joined MDB entries from br_add_if,
> > and eventually the host joined addresses expire, and a switchdev
> > notification for deleting it is emitted, but surprise, the original
> > addition was already completely missed.
> >
> > The strategy to address this problem is to replay the MDB entries (both
> > the port ones and the host joined ones) when the new port joins the
> > bridge, similar to what vxlan_fdb_replay does (in that case, its FDB can
> > be populated and only then attached to a bridge that you offload).
> > However there are 2 possibilities: the addresses can be 'pushed' by the
> > bridge into the port, or the port can 'pull' them from the bridge.
> >
> > Considering that in the general case, the new port can be really late to
> > the party, and there may have been many other switchdev ports that
> > already received the initial notification, we would like to avoid
> > delivering duplicate events to them, since they might misbehave. And
> > currently, the bridge calls the entire switchdev notifier chain, whereas
> > for replaying it should just call the notifier block of the new guy.
> > But the bridge doesn't know what is the new guy's notifier block, it
> > just knows where the switchdev notifier chain is. So for simplification,
> > we make this a driver-initiated pull for now, and the notifier block is
> > passed as an argument.
> >
> > To emulate the calling context for mdb objects (deferred and put on the
> > blocking notifier chain), we must iterate under RCU protection through
> > the bridge's mdb entries, queue them, and only call them once we're out
> > of the RCU read-side critical section.
> >
> > Suggested-by: Ido Schimmel <idosch@idosch.org>
> > Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> > ---
> >  include/linux/if_bridge.h |  9 +++++
> >  net/bridge/br_mdb.c       | 84 +++++++++++++++++++++++++++++++++++++++
> >  net/dsa/dsa_priv.h        |  2 +
> >  net/dsa/port.c            |  6 +++
> >  net/dsa/slave.c           |  2 +-
> >  5 files changed, 102 insertions(+), 1 deletion(-)
> >
> > diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
> > index ebd16495459c..4c25dafb013d 100644
> > --- a/include/linux/if_bridge.h
> > +++ b/include/linux/if_bridge.h
> > @@ -69,6 +69,8 @@ bool br_multicast_has_querier_anywhere(struct net_device *dev, int proto);
> >  bool br_multicast_has_querier_adjacent(struct net_device *dev, int proto);
> >  bool br_multicast_enabled(const struct net_device *dev);
> >  bool br_multicast_router(const struct net_device *dev);
> > +int br_mdb_replay(struct net_device *br_dev, struct net_device *dev,
> > +		  struct notifier_block *nb, struct netlink_ext_ack *extack);
> >  #else
> >  static inline int br_multicast_list_adjacent(struct net_device *dev,
> >  					     struct list_head *br_ip_list)
> > @@ -93,6 +95,13 @@ static inline bool br_multicast_router(const struct net_device *dev)
> >  {
> >  	return false;
> >  }
> > +static inline int br_mdb_replay(struct net_device *br_dev,
> > +				struct net_device *dev,
> > +				struct notifier_block *nb,
> > +				struct netlink_ext_ack *extack)
> > +{
> > +	return -EINVAL;
>
> Should we return -EOPNOTUSPP such that this is not made fatal for DSA if
> someone compiles its kernel with CONFIG_BRIDGE_IGMP_SNOOPING disabled?

Sure, I'll change the return values of the shims everywhere.

> > +}
> >  #endif
> >
> >  #if IS_ENABLED(CONFIG_BRIDGE) && IS_ENABLED(CONFIG_BRIDGE_VLAN_FILTERING)
> > diff --git a/net/bridge/br_mdb.c b/net/bridge/br_mdb.c
> > index 8846c5bcd075..23973186094c 100644
> > --- a/net/bridge/br_mdb.c
> > +++ b/net/bridge/br_mdb.c
> > @@ -506,6 +506,90 @@ static void br_mdb_complete(struct net_device *dev, int err, void *priv)
> >  	kfree(priv);
> >  }
> >
> > +static int br_mdb_replay_one(struct notifier_block *nb, struct net_device *dev,
> > +			     struct net_bridge_mdb_entry *mp, int obj_id,
> > +			     struct net_device *orig_dev,
> > +			     struct netlink_ext_ack *extack)
> > +{
> > +	struct switchdev_notifier_port_obj_info obj_info = {
> > +		.info = {
> > +			.dev = dev,
> > +			.extack = extack,
> > +		},
> > +	};
> > +	struct switchdev_obj_port_mdb mdb = {
> > +		.obj = {
> > +			.orig_dev = orig_dev,
> > +			.id = obj_id,
> > +		},
> > +		.vid = mp->addr.vid,
> > +	};
> > +	int err;
> > +
> > +	if (mp->addr.proto == htons(ETH_P_IP))
> > +		ip_eth_mc_map(mp->addr.dst.ip4, mdb.addr);
> > +#if IS_ENABLED(CONFIG_IPV6)
> > +	else if (mp->addr.proto == htons(ETH_P_IPV6))
> > +		ipv6_eth_mc_map(&mp->addr.dst.ip6, mdb.addr);
> > +#endif
> > +	else
> > +		ether_addr_copy(mdb.addr, mp->addr.dst.mac_addr);
>
> How you would feel about re-using br_mdb_switchdev_host_port() here and
> pass a 'type' value that is neither RTM_NEWDB nor RTM_DELDB just so you
> don't have to duplicate that code here and we ensure it is in sync?

The trouble is that br_mdb_switchdev_host calls switchdev_port_obj_add,
and I think the agreement was that replayed events should be a silent,
one-to-one conversation via a direct call to the notifier block of the
interested driver, as opposed to a call to the entire notifier chain
which would make everybody else in the system see duplicates. This is
the reason why I duplicated mostly everything.

  reply	other threads:[~2021-03-20 11:20 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-18 23:18 [RFC PATCH v2 net-next 00/16] Better support for sandwiched LAGs with bridge and DSA Vladimir Oltean
2021-03-18 23:18 ` [RFC PATCH v2 net-next 01/16] net: dsa: call dsa_port_bridge_join when joining a LAG that is already in a bridge Vladimir Oltean
2021-03-19 22:04   ` Florian Fainelli
2021-03-22 10:24   ` Tobias Waldekranz
2021-03-18 23:18 ` [RFC PATCH v2 net-next 02/16] net: dsa: pass extack to dsa_port_{bridge,lag}_join Vladimir Oltean
2021-03-19 22:05   ` Florian Fainelli
2021-03-22 10:25   ` Tobias Waldekranz
2021-03-18 23:18 ` [RFC PATCH v2 net-next 03/16] net: dsa: inherit the actual bridge port flags at join time Vladimir Oltean
2021-03-19 22:08   ` Florian Fainelli
2021-03-20 10:05     ` Vladimir Oltean
2021-03-18 23:18 ` [RFC PATCH v2 net-next 04/16] net: dsa: sync up with bridge port's STP state when joining Vladimir Oltean
2021-03-19 22:11   ` Florian Fainelli
2021-03-22 10:29   ` Tobias Waldekranz
2021-03-18 23:18 ` [RFC PATCH v2 net-next 05/16] net: dsa: sync up VLAN filtering state when joining the bridge Vladimir Oltean
2021-03-19 22:11   ` Florian Fainelli
2021-03-22 10:30   ` Tobias Waldekranz
2021-03-18 23:18 ` [RFC PATCH v2 net-next 06/16] net: dsa: sync multicast router " Vladimir Oltean
2021-03-19 22:12   ` Florian Fainelli
2021-03-22 11:17   ` Tobias Waldekranz
2021-03-22 11:43     ` Vladimir Oltean
2021-03-18 23:18 ` [RFC PATCH v2 net-next 07/16] net: dsa: sync ageing time " Vladimir Oltean
2021-03-19 22:13   ` Florian Fainelli
2021-03-20 10:09     ` Vladimir Oltean
2021-03-22 11:20   ` Tobias Waldekranz
2021-03-18 23:18 ` [RFC PATCH v2 net-next 08/16] net: dsa: replay port and host-joined mdb entries " Vladimir Oltean
2021-03-19 22:20   ` Florian Fainelli
2021-03-20  9:53     ` Vladimir Oltean [this message]
2021-03-22 15:56       ` Florian Fainelli
2021-03-18 23:18 ` [RFC PATCH v2 net-next 09/16] net: dsa: replay port and local fdb " Vladimir Oltean
2021-03-22 15:44   ` Tobias Waldekranz
2021-03-22 16:19     ` Vladimir Oltean
2021-03-22 17:07       ` Tobias Waldekranz
2021-03-22 17:13         ` Vladimir Oltean
2021-03-18 23:18 ` [RFC PATCH v2 net-next 10/16] net: dsa: replay VLANs installed on port " Vladimir Oltean
2021-03-19 22:24   ` Florian Fainelli
2021-03-18 23:18 ` [RFC PATCH v2 net-next 11/16] net: ocelot: support multiple bridges Vladimir Oltean
2021-03-18 23:18 ` [RFC PATCH v2 net-next 12/16] net: ocelot: call ocelot_netdevice_bridge_join when joining a bridged LAG Vladimir Oltean
2021-03-18 23:18 ` [RFC PATCH v2 net-next 13/16] net: ocelot: replay switchdev events when joining bridge Vladimir Oltean
2021-03-18 23:18 ` [RFC PATCH v2 net-next 14/16] net: dsa: don't set skb->offload_fwd_mark when not offloading the bridge Vladimir Oltean
2021-03-19  8:52   ` DENG Qingfang
2021-03-19  9:06     ` Vladimir Oltean
2021-03-19  9:29       ` DENG Qingfang
2021-03-19 10:49         ` Vladimir Oltean
2021-03-22  8:04           ` DENG Qingfang
2021-03-22 22:23             ` Vladimir Oltean
2021-03-22 16:06   ` Florian Fainelli
2021-03-18 23:18 ` [RFC PATCH v2 net-next 15/16] net: dsa: return -EOPNOTSUPP when driver does not implement .port_lag_join Vladimir Oltean
2021-03-22 15:51   ` Florian Fainelli
2021-03-22 15:58   ` Tobias Waldekranz
2021-03-18 23:18 ` [RFC PATCH v2 net-next 16/16] net: bridge: switchdev: let drivers inform which bridge ports are offloaded Vladimir Oltean
2021-03-22 16:30   ` Tobias Waldekranz
2021-03-22 17:19     ` Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210320095311.noojqngoyobuntej@skbuf \
    --to=olteanv@gmail.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=grygorii.strashko@ti.com \
    --cc=idosch@idosch.org \
    --cc=ioana.ciornei@nxp.com \
    --cc=ivecera@redhat.com \
    --cc=jiri@resnulli.us \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nikolay@nvidia.com \
    --cc=roopa@nvidia.com \
    --cc=tchornyi@marvell.com \
    --cc=tobias@waldekranz.com \
    --cc=vigneshr@ti.com \
    --cc=vivien.didelot@gmail.com \
    --cc=vkochan@marvell.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).