From: MD Danish Anwar <danishanwar@ti.com>
To: "Andrew F. Davis" <afd@ti.com>, Suman Anna <s-anna@ti.com>,
Roger Quadros <rogerq@kernel.org>,
Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>,
MD Danish Anwar <danishanwar@ti.com>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Bjorn Andersson <andersson@kernel.org>,
Santosh Shilimkar <ssantosh@kernel.org>,
Nishanth Menon <nm@ti.com>
Cc: <linux-remoteproc@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<srk@ti.com>, <devicetree@vger.kernel.org>,
<netdev@vger.kernel.org>
Subject: [PATCH v9 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
Date: Fri, 14 Apr 2023 10:25:42 +0530 [thread overview]
Message-ID: <20230414045542.3249939-5-danishanwar@ti.com> (raw)
In-Reply-To: <20230414045542.3249939-1-danishanwar@ti.com>
From: Suman Anna <s-anna@ti.com>
The PRUSS CFG module is represented as a syscon node and is currently
managed by the PRUSS platform driver. Add easy accessor functions to set
GPI mode, MII_RT event enable/disable and XFR (XIN XOUT) enable/disable
to enable the PRUSS Ethernet usecase. These functions reuse the generic
pruss_cfg_update() API function.
Signed-off-by: Suman Anna <s-anna@ti.com>
Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
drivers/remoteproc/pru_rproc.c | 15 -------
drivers/soc/ti/pruss.c | 71 ++++++++++++++++++++++++++++++++++
include/linux/pruss_driver.h | 51 ++++++++++++++++++++++++
3 files changed, 122 insertions(+), 15 deletions(-)
diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
index 095f66130f48..54f5ce302e7a 100644
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -81,21 +81,6 @@ enum pru_iomem {
PRU_IOMEM_MAX,
};
-/**
- * enum pru_type - PRU core type identifier
- *
- * @PRU_TYPE_PRU: Programmable Real-time Unit
- * @PRU_TYPE_RTU: Auxiliary Programmable Real-Time Unit
- * @PRU_TYPE_TX_PRU: Transmit Programmable Real-Time Unit
- * @PRU_TYPE_MAX: just keep this one at the end
- */
-enum pru_type {
- PRU_TYPE_PRU = 0,
- PRU_TYPE_RTU,
- PRU_TYPE_TX_PRU,
- PRU_TYPE_MAX,
-};
-
/**
* struct pru_private_data - device data for a PRU core
* @type: type of the PRU core (PRU, RTU, Tx_PRU)
diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index 4ad6ccb039c8..f002fd9e79c6 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -213,6 +213,77 @@ int pruss_cfg_set_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 mux)
}
EXPORT_SYMBOL_GPL(pruss_cfg_set_gpmux);
+/**
+ * pruss_cfg_gpimode() - set the GPI mode of the PRU
+ * @pruss: the pruss instance handle
+ * @pru_id: id of the PRU core within the PRUSS
+ * @mode: GPI mode to set
+ *
+ * Sets the GPI mode for a given PRU by programming the
+ * corresponding PRUSS_CFG_GPCFGx register
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int pruss_cfg_gpimode(struct pruss *pruss, enum pruss_pru_id pru_id,
+ enum pruss_gpi_mode mode)
+{
+ if (pru_id >= PRUSS_NUM_PRUS || mode >= PRUSS_GPI_MODE_MAX)
+ return -EINVAL;
+
+ return pruss_cfg_update(pruss, PRUSS_CFG_GPCFG(pru_id),
+ PRUSS_GPCFG_PRU_GPI_MODE_MASK,
+ mode << PRUSS_GPCFG_PRU_GPI_MODE_SHIFT);
+}
+EXPORT_SYMBOL_GPL(pruss_cfg_gpimode);
+
+/**
+ * pruss_cfg_miirt_enable() - Enable/disable MII RT Events
+ * @pruss: the pruss instance
+ * @enable: enable/disable
+ *
+ * Enable/disable the MII RT Events for the PRUSS.
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int pruss_cfg_miirt_enable(struct pruss *pruss, bool enable)
+{
+ u32 set = enable ? PRUSS_MII_RT_EVENT_EN : 0;
+
+ return pruss_cfg_update(pruss, PRUSS_CFG_MII_RT,
+ PRUSS_MII_RT_EVENT_EN, set);
+}
+EXPORT_SYMBOL_GPL(pruss_cfg_miirt_enable);
+
+/**
+ * pruss_cfg_xfr_enable() - Enable/disable XIN XOUT shift functionality
+ * @pruss: the pruss instance
+ * @pru_type: PRU core type identifier
+ * @enable: enable/disable
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int pruss_cfg_xfr_enable(struct pruss *pruss, enum pru_type pru_type,
+ bool enable)
+{
+ u32 mask, set;
+
+ switch (pru_type) {
+ case PRU_TYPE_PRU:
+ mask = PRUSS_SPP_XFER_SHIFT_EN;
+ break;
+ case PRU_TYPE_RTU:
+ mask = PRUSS_SPP_RTU_XFR_SHIFT_EN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ set = enable ? mask : 0;
+
+ return pruss_cfg_update(pruss, PRUSS_CFG_SPP, mask, set);
+}
+EXPORT_SYMBOL_GPL(pruss_cfg_xfr_enable);
+
static void pruss_of_free_clk_provider(void *data)
{
struct device_node *clk_mux_np = data;
diff --git a/include/linux/pruss_driver.h b/include/linux/pruss_driver.h
index 5bb8897724a9..c9a31c567e85 100644
--- a/include/linux/pruss_driver.h
+++ b/include/linux/pruss_driver.h
@@ -32,6 +32,33 @@ enum pruss_gp_mux_sel {
PRUSS_GP_MUX_SEL_MAX,
};
+/*
+ * enum pruss_gpi_mode - PRUSS GPI configuration modes, used
+ * to program the PRUSS_GPCFG0/1 registers
+ */
+enum pruss_gpi_mode {
+ PRUSS_GPI_MODE_DIRECT,
+ PRUSS_GPI_MODE_PARALLEL,
+ PRUSS_GPI_MODE_28BIT_SHIFT,
+ PRUSS_GPI_MODE_MII,
+ PRUSS_GPI_MODE_MAX,
+};
+
+/**
+ * enum pru_type - PRU core type identifier
+ *
+ * @PRU_TYPE_PRU: Programmable Real-time Unit
+ * @PRU_TYPE_RTU: Auxiliary Programmable Real-Time Unit
+ * @PRU_TYPE_TX_PRU: Transmit Programmable Real-Time Unit
+ * @PRU_TYPE_MAX: just keep this one at the end
+ */
+enum pru_type {
+ PRU_TYPE_PRU,
+ PRU_TYPE_RTU,
+ PRU_TYPE_TX_PRU,
+ PRU_TYPE_MAX,
+};
+
/*
* enum pruss_mem - PRUSS memory range identifiers
*/
@@ -86,6 +113,11 @@ int pruss_release_mem_region(struct pruss *pruss,
struct pruss_mem_region *region);
int pruss_cfg_get_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 *mux);
int pruss_cfg_set_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 mux);
+int pruss_cfg_gpimode(struct pruss *pruss, enum pruss_pru_id pru_id,
+ enum pruss_gpi_mode mode);
+int pruss_cfg_miirt_enable(struct pruss *pruss, bool enable);
+int pruss_cfg_xfr_enable(struct pruss *pruss, enum pru_type pru_type,
+ bool enable);
#else
@@ -121,6 +153,25 @@ static inline int pruss_cfg_set_gpmux(struct pruss *pruss,
return ERR_PTR(-EOPNOTSUPP);
}
+static inline int pruss_cfg_gpimode(struct pruss *pruss,
+ enum pruss_pru_id pru_id,
+ enum pruss_gpi_mode mode)
+{
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline int pruss_cfg_miirt_enable(struct pruss *pruss, bool enable)
+{
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline int pruss_cfg_xfr_enable(struct pruss *pruss,
+ enum pru_type pru_type,
+ bool enable);
+{
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
#endif /* CONFIG_TI_PRUSS */
#endif /* _PRUSS_DRIVER_H_ */
--
2.34.1
next prev parent reply other threads:[~2023-04-14 4:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-14 4:55 [PATCH v9 0/4] Introduce PRU platform consumer API MD Danish Anwar
2023-04-14 4:55 ` [PATCH v9 1/4] soc: ti: pruss: Add pruss_get()/put() API MD Danish Anwar
2023-04-14 4:55 ` [PATCH v9 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API MD Danish Anwar
2023-04-14 4:55 ` [PATCH v9 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs MD Danish Anwar
2023-04-14 4:55 ` MD Danish Anwar [this message]
2023-05-17 17:56 ` [PATCH v9 0/4] Introduce PRU platform consumer API Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230414045542.3249939-5-danishanwar@ti.com \
--to=danishanwar@ti.com \
--cc=afd@ti.com \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=nm@ti.com \
--cc=rogerq@kernel.org \
--cc=s-anna@ti.com \
--cc=srk@ti.com \
--cc=ssantosh@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).