linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kim Kyuwon <chammoru@gmail.com>
To: Kevin Hilman <khilman@deeprootsystems.com>
Cc: OMAP <linux-omap@vger.kernel.org>,
	"Tony Lindgren" <tony@atomide.com>,
	박경민 <kyungmin.park@samsung.com>
Subject: Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v2
Date: Sat, 4 Apr 2009 08:47:20 +0900	[thread overview]
Message-ID: <4d34a0a70904031647n6ae7c175w96b1610bf553ebda@mail.gmail.com> (raw)
In-Reply-To: <87y6uh1zsp.fsf@deeprootsystems.com>

Hi Kevin,
Thanks for your prompt answer.

On Sat, Apr 4, 2009 at 1:12 AM, Kevin Hilman
<khilman@deeprootsystems.com> wrote:
> Kim Kyuwon <chammoru@gmail.com> writes:
>
>>>> +
>>>> +void omap3_get_wakeup_status(struct pm_wakeup_status **pm_wkst)
>>>> +{
>>>> +     *pm_wkst = &omap3_pm_wkst;
>>>> +}
>>>> +
>>>
>>> Can you rename this to omap3_get_last_wake_state()
>>
>> Actually, I removed this function and I didn't get the WKST registers
>> from the last PRCM interrupt in the new patch. Sorry that I don't
>> address your suggestion. But I found that the PRCM interrupt is being
>> generated in normal state on the latest PM branch and, from OMAP34XX
>> TRM (4.9 PRCM Interrupts), PRCM Interrupts can be generated in many
>> cases in addition to wake-up from suspend. So if my wakeup code gets
>> the WSKT values from PRCM interrupt, I think it could show the wrong
>> information.
>>
>
> What type of wrong information do you think you would get?

On our custom OMAP3430 ES3.1 board on which the latest PM branch
kernel is running, the PRCM interrupt is being generated about every
0.5 sec.(not exact) and 'OMAP3430_ST_GPT12_MASK' is set in the
PM_WKST_WKUP register.

FYI: When I wrongly configured the d2d_mstdby and d2d_swakeup pads,
PRCM interrupts was also generated (Refer to
http://markmail.org/thread/juardvjdvsrrqwuj)

> After looking again, you are probably querying the WKST registers
> too late.  This version was not querying until someone dumped
> the sysfs regs.  In that case, some other idle event could have
> changed the WKST regs.
>
> What you should do is query the WKST regs in your early_resume hook
> (the same place you query the pending IRQs.)  This way you know
> exactly when the WKST regs are taken.

However, my 'early_resume' hook is invoked before generating any
interrupt including PRCM interrupts, because IRQs are disabled by
arch_suspend_disablel_irqs() in that context.
But if I query the WKST regs in the 'resume' hook, I think another
PRCM interrupts can be generated.

> Kevin
>

Best regards,
-- 
Kyuwon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2009-04-03 23:47 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-19  4:25 [PATCH] OMAP3: PM: Add the wakeup source driver, v2 Kim Kyuwon
2009-03-31  2:48 ` Kim Kyuwon
2009-04-01  0:09 ` Kevin Hilman
2009-04-03 10:20   ` Kim Kyuwon
2009-04-03 16:12     ` Kevin Hilman
2009-04-03 23:47       ` Kim Kyuwon [this message]
2009-04-04  0:20         ` Kevin Hilman
2009-04-04  0:26           ` Kim Kyuwon
2009-04-04 20:22             ` Paul Walmsley
2009-04-06  2:30               ` Kim Kyuwon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4d34a0a70904031647n6ae7c175w96b1610bf553ebda@mail.gmail.com \
    --to=chammoru@gmail.com \
    --cc=khilman@deeprootsystems.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).