Re: [PATCH v2 04/14] irqchip: pruss: Add a PRUSS irqchip driver for PRUSS interrupts

[Roger Quadros <rogerq@ti.com>]

On 04/02/19 17:11, Andrew F. Davis wrote:
> On 2/4/19 8:22 AM, Roger Quadros wrote:
>> From: "Andrew F. Davis" <afd@ti.com>
>>
> 
> [...]
> 
>> +static const struct pruss_intc_match_data am437x_pruss_intc_data = {
>> +	.no_host7_intr = true,
> 
> Like done for the PRUSS driver with 'has_no_sharedram' becoming a DT
> flag the same could be done here, then all this match data stuff could
> be dropped.

Agreed.

> 
>> +};
>> +
>> +static const struct of_device_id pruss_intc_of_match[] = {
>> +	{
>> +		.compatible = "ti,am3356-pruss-intc",
>> +		.data = NULL,
>> +	},
>> +	{
>> +		.compatible = "ti,am4376-pruss-intc",
>> +		.data = &am437x_pruss_intc_data,
>> +	},
>> +	{
>> +		.compatible = "ti,am5728-pruss-intc",
>> +		.data = NULL,
>> +	},
>> +	{ /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, pruss_intc_of_match);
>> +
>> +static struct platform_driver pruss_intc_driver = {
>> +	.driver = {
>> +		.name = "pruss-intc",
>> +		.of_match_table = pruss_intc_of_match,
>> +	},
>> +	.probe  = pruss_intc_probe,
>> +	.remove = pruss_intc_remove,
>> +};
>> +module_platform_driver(pruss_intc_driver);
>> +
>> +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
>> +MODULE_AUTHOR("Suman Anna <s-anna@ti.com>");
>> +MODULE_DESCRIPTION("PRU-ICSS INTC Driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/include/linux/irqchip/irq-pruss-intc.h b/include/linux/irqchip/irq-pruss-intc.h
>> new file mode 100644
>> index 0000000..4538a0b
>> --- /dev/null
>> +++ b/include/linux/irqchip/irq-pruss-intc.h
>> @@ -0,0 +1,94 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/**
>> + * irq-pruss-intc.h - PRU-ICSS INTC management
> 
> Filename not needed.

OK.

cheers,
-roger

> 
> Andrew
> 
>> + *
>> + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
>> + */
>> +
>> +#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_PRUSS_INTC_H
>> +#define __INCLUDE_LINUX_IRQCHIP_IRQ_PRUSS_INTC_H
>> +
>> +/* maximum number of system events */
>> +#define MAX_PRU_SYS_EVENTS	64
>> +
>> +/* maximum number of interrupt channels */
>> +#define MAX_PRU_CHANNELS	10
>> +
>> +/**
>> + * struct pruss_intc_config - INTC configuration info
>> + * @sysev_to_ch: system events to channel mapping information
>> + * @ch_to_host: interrupt channel to host interrupt information
>> + */
>> +struct pruss_intc_config {
>> +	s8 sysev_to_ch[MAX_PRU_SYS_EVENTS];
>> +	s8 ch_to_host[MAX_PRU_CHANNELS];
>> +};
>> +
>> +#if IS_ENABLED(CONFIG_TI_PRUSS)
>> +
>> +/**
>> + * pruss_intc_configure() - configure the PRUSS INTC
>> + * @dev: device
>> + * @intc_config: PRU core-specific INTC configuration
>> + *
>> + * Configures the PRUSS INTC with the provided configuration from
>> + * a PRU core. Any existing event to channel mappings or channel to
>> + * host interrupt mappings are checked to make sure there are no
>> + * conflicting configuration between both the PRU cores. The function
>> + * is intended to be used only by the PRU remoteproc driver.
>> + *
>> + * Returns 0 on success, or a suitable error code otherwise
>> + */
>> +int pruss_intc_configure(struct device *dev,
>> +			 struct pruss_intc_config *intc_config);
>> +
>> +/**
>> + * pruss_intc_unconfigure() - unconfigure the PRUSS INTC
>> + * @dev: device
>> + * @intc_config: PRU core specific INTC configuration
>> + *
>> + * Undo whatever was done in pruss_intc_configure() for a PRU core.
>> + * It should be sufficient to just mark the resources free in the
>> + * global map and disable the host interrupts and sysevents.
>> + */
>> +int pruss_intc_unconfigure(struct device *dev,
>> +			   struct pruss_intc_config *intc_config);
>> +/**
>> + * pruss_intc_trigger() - trigger a PRU system event
>> + * @irq: linux IRQ number associated with a PRU system event
>> + *
>> + * Trigger an interrupt by signalling a specific PRU system event.
>> + * This can be used by PRUSS client users to raise/send an event to
>> + * a PRU or any other core that is listening on the host interrupt
>> + * mapped to that specific PRU system event. The @irq variable is the
>> + * Linux IRQ number associated with a specific PRU system event that
>> + * a client user/application uses. The interrupt mappings for this is
>> + * provided by the PRUSS INTC irqchip instance.
>> + *
>> + * Returns 0 on success, or an error value upon failure.
>> + */
>> +int pruss_intc_trigger(unsigned int irq);
>> +
>> +#else
>> +
>> +static inline int pruss_intc_configure(struct device *dev,
>> +				       struct pruss_intc_config *intc_config)
>> +{
>> +	return -ENOTSUPP;
>> +}
>> +
>> +static inline int pruss_intc_unconfigure(struct device *dev,
>> +					 struct pruss_intc_config *intc_config)
>> +{
>> +	return -ENOTSUPP;
>> +}
>> +
>> +static inline int pruss_intc_trigger(unsigned int irq)
>> +{
>> +	return -ENOTSUPP;
>> +}
>> +
>> +#endif	/* CONFIG_TI_PRUSS */
>> +
>> +#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_OMAP_INTC_H */
>> +
>>

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki