linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Steve Sakoman <sakoman@gmail.com>
To: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>,
	linux-arm-kernel@lists.arm.linux.org.uk,
	linux-omap@vger.kernel.org
Subject: Re: [PATCH 1/4] ARM: OMAP3: Add SMSC911X support to Overo platform (V2)
Date: Sun, 15 Mar 2009 09:36:25 -0700	[thread overview]
Message-ID: <5e088bd90903150936w45e68b63k1252cea38b48a5fc@mail.gmail.com> (raw)
In-Reply-To: <20090315153827.GA10541@n2100.arm.linux.org.uk>

On Sun, Mar 15, 2009 at 8:38 AM, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Fri, Mar 13, 2009 at 03:44:53PM -0700, Tony Lindgren wrote:
>> Gumstix will soon be shipping a variant of their Summit board that
>> includes an SMSC LAN9221 ethernet interface.  This patch provides
>> support via the smsc911x driver when enabled in kernel config.
>
> Does this actually work with the smsc911x driver which is in mainline,
> or is it dependent on the smsc911x patches from Steve Glendinning?

For the shipping Overo kernel, I build with 2 of Steve's patches, copied below.

Steve

======================================================

From: Steve Glendinning <steve.glendinning@smsc.com>

This patch adds support for the platform_device's resources to indicate
additional flags to use when registering the irq, for example
IORESOURCE_IRQ_LOWLEVEL (which corresponds to IRQF_TRIGGER_LOW).  These
should be set in the irq resource flags field.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
---
 drivers/net/smsc911x.c |   19 ++++++++++++++-----
 1 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index f513bdf..3565df1 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1892,9 +1892,9 @@ static int __devinit smsc911x_drv_probe(struct
platform_device *pdev)
 	struct net_device *dev;
 	struct smsc911x_data *pdata;
 	struct smsc911x_platform_config *config = pdev->dev.platform_data;
-	struct resource *res;
+	struct resource *res, *irq_res;
 	unsigned int intcfg = 0;
-	int res_size;
+	int res_size, irq_flags;
 	int retval;
 	DECLARE_MAC_BUF(mac);

@@ -1919,6 +1919,14 @@ static int __devinit smsc911x_drv_probe(struct
platform_device *pdev)
 	}
 	res_size = res->end - res->start;

+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq_res) {
+		pr_warning("%s: Could not allocate irq resource.\n",
+			SMSC_CHIPNAME);
+		retval = -ENODEV;
+		goto out_0;
+	}
+
 	if (!request_mem_region(res->start, res_size, SMSC_CHIPNAME)) {
 		retval = -EBUSY;
 		goto out_0;
@@ -1935,7 +1943,8 @@ static int __devinit smsc911x_drv_probe(struct
platform_device *pdev)

 	pdata = netdev_priv(dev);

-	dev->irq = platform_get_irq(pdev, 0);
+	dev->irq = irq_res->start;
+	irq_flags = irq_res->flags & IRQF_TRIGGER_MASK;
 	pdata->ioaddr = ioremap_nocache(res->start, res_size);

 	/* copy config parameters across to pdata */
@@ -1968,8 +1977,8 @@ static int __devinit smsc911x_drv_probe(struct
platform_device *pdev)
 	smsc911x_reg_write(pdata, INT_EN, 0);
 	smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF);

-	retval = request_irq(dev->irq, smsc911x_irqhandler, IRQF_DISABLED,
-			     dev->name, dev);
+	retval = request_irq(dev->irq, smsc911x_irqhandler,
+			     irq_flags | IRQF_DISABLED, dev->name, dev);
 	if (retval) {
 		SMSC_WARNING(PROBE,
 			"Unable to claim requested irq: %d", dev->irq);

======================================================

From: Steve Glendinning <steve.glendinning@smsc.com>

The isr supports shared operation, so register it with the IRQF_SHARED
flag to indicate this.

This patch also removes the IRQF_DISABLED flag.  This driver doesn't
need it, and IRQF_DISABLED isn't guaranteed when using shared interrupts.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
---
 drivers/net/smsc911x.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 3565df1..f882fd5 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1978,7 +1978,7 @@ static int __devinit smsc911x_drv_probe(struct
platform_device *pdev)
 	smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF);

 	retval = request_irq(dev->irq, smsc911x_irqhandler,
-			     irq_flags | IRQF_DISABLED, dev->name, dev);
+			     irq_flags | IRQF_SHARED, dev->name, dev);
 	if (retval) {
 		SMSC_WARNING(PROBE,
 			"Unable to claim requested irq: %d", dev->irq);
-- 
1.6.0.6

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2009-03-15 16:36 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-13 22:43 [PATCH 0/4] Omap board updates for merge window after 2.6.29 Tony Lindgren
2009-03-13 22:44 ` [PATCH 1/4] ARM: OMAP3: Add SMSC911X support to Overo platform (V2) Tony Lindgren
2009-03-15 15:38   ` Russell King - ARM Linux
2009-03-15 16:36     ` Steve Sakoman [this message]
2009-03-15 17:00       ` Russell King - ARM Linux
2009-03-15 17:13         ` Steve Sakoman
2009-03-15 17:37           ` Russell King - ARM Linux
2009-03-16 18:08             ` Tony Lindgren
2009-03-17  8:18               ` Steve.Glendinning
2009-03-13 22:46 ` [PATCH 2/4] ARM: OMAP3: Add ADS7846 touchscreen support to Overo platform Tony Lindgren
2009-03-16 20:38   ` [PATCH 2/4] ARM: OMAP3: Add ADS7846 touchscreen support to Overo platform, v2 Tony Lindgren
2009-03-16 21:57     ` Felipe Balbi
2009-03-24  3:54       ` [PATCH 2/4] ARM: OMAP3: Add ADS7846 touchscreen support to Overo platform, v3 Tony Lindgren
2009-03-13 22:47 ` [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP Tony Lindgren
2009-03-15 15:47   ` Russell King - ARM Linux
2009-03-15 15:48     ` Russell King - ARM Linux
2009-03-16 18:14       ` [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v2 Tony Lindgren
2009-03-16 18:22         ` [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3 Tony Lindgren
2009-03-23 19:05           ` [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v4 Tony Lindgren
2009-03-31 11:42           ` [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3 Gadiyar, Anand
2009-03-31 13:37             ` Gadiyar, Anand
2009-03-31 14:50               ` Tony Lindgren
2009-03-31 18:48             ` Russell King - ARM Linux
2009-04-01  8:25               ` Gadiyar, Anand
2009-04-01  8:47                 ` Syed Mohammed, Khasim
2009-04-01 19:04                   ` Paul Walmsley
2009-04-01 22:07                     ` Tony Lindgren
2009-04-01 23:18                       ` Kevin Hilman
2009-04-02  0:00                         ` [PATCH] ARM: Do early I/O mapping if spinlock debugging is enabled (Re: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3) Tony Lindgren
2009-04-02  7:38                           ` Russell King - ARM Linux
2009-04-02 14:54                             ` Tony Lindgren
2009-04-02  4:33                         ` [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3 Pandita, Vikram
2009-04-02 20:01                           ` Pandita, Vikram
2009-04-03 19:14                     ` Paul Walmsley
2009-04-03 19:25                       ` Gadiyar, Anand
2009-04-04 11:18                         ` Gadiyar, Anand
2009-04-03 23:12                       ` Kevin Hilman
2009-04-03 23:29                         ` Paul Walmsley
2009-03-13 22:48 ` [PATCH 4/4] ARM OMAP3: Initial support for Nokia RX-51 Tony Lindgren
2009-03-15 15:47   ` Russell King - ARM Linux
2009-03-16 18:21     ` [PATCH 4/4] ARM OMAP3: Initial support for Nokia RX-51, v2 Tony Lindgren
2009-03-24  2:52 ` [PATCH 0/4] Omap board updates for merge window after 2.6.29 Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5e088bd90903150936w45e68b63k1252cea38b48a5fc@mail.gmail.com \
    --to=sakoman@gmail.com \
    --cc=linux-arm-kernel@lists.arm.linux.org.uk \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).