Linux-OMAP Archive on lore.kernel.org
 help / color / Atom feed
From: Trent Piepho <tpiepho@gmail.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Drew Fustini <drew@beagleboard.org>,
	Rob Herring <robh+dt@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Jason Kridner <jkridner@beagleboard.org>,
	Robert Nelson <robertcnelson@gmail.com>,
	linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-gpio <linux-gpio@vger.kernel.org>,
	Christina Quast <cquast@hanoverdisplays.com>
Subject: Re: [PATCH] ARM: dts: document pinctrl-single,pins when #pinctrl-cells = 2
Date: Wed, 23 Sep 2020 18:34:21 -0700
Message-ID: <CA+7tXigeNhQQVuAu0toZrvBKvMYkDU-8EWTpJR29HLTAMgoOBA@mail.gmail.com> (raw)
In-Reply-To: <20200923065755.GR7101@atomide.com>

On Tue, Sep 22, 2020 at 11:57 PM Tony Lindgren <tony@atomide.com> wrote:
>
> Also FYI, folks have also complained for a long time that the pinctrl-single
> binding mixes mux and conf values while they should be handled separately.
>

Instead of combining two fields when the dts is generated they are now
combined when the pinctrl-single driver reads the dts.  Other than
this detail, the result is the same.  The board dts source is the
same.  The value programmed into the pinctrl register is the same.
There is no mechanism currently that can alter that value in any way.

What does combining them later allow that is not possible now?

  reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-14 10:43 Drew Fustini
2020-09-17  9:03 ` Trent Piepho
2020-09-17  9:20   ` Drew Fustini
2020-09-17 10:00     ` Trent Piepho
2020-09-17 10:39       ` Drew Fustini
2020-09-23  6:57         ` Tony Lindgren
2020-09-24  1:34           ` Trent Piepho [this message]
2020-09-24  5:43             ` Tony Lindgren
2020-09-24  5:49               ` Trent Piepho
2020-09-24  6:06                 ` Tony Lindgren
2020-09-24  6:31                   ` Trent Piepho
2020-09-24  7:04                     ` Tony Lindgren
2020-09-29 20:15                       ` Trent Piepho
2020-09-30  5:15                         ` Tony Lindgren
2020-09-30  8:34                           ` Trent Piepho
2020-09-30  9:15                             ` Tony Lindgren
2020-09-30  9:34                               ` Trent Piepho
2020-09-30  9:47                                 ` Tony Lindgren
2020-09-30 18:50                                   ` Trent Piepho
2020-10-01  7:00                                     ` Tony Lindgren
2020-09-23  6:59 ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA+7tXigeNhQQVuAu0toZrvBKvMYkDU-8EWTpJR29HLTAMgoOBA@mail.gmail.com \
    --to=tpiepho@gmail.com \
    --cc=cquast@hanoverdisplays.com \
    --cc=devicetree@vger.kernel.org \
    --cc=drew@beagleboard.org \
    --cc=jkridner@beagleboard.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=robertcnelson@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-OMAP Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-omap/0 linux-omap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-omap linux-omap/ https://lore.kernel.org/linux-omap \
		linux-omap@vger.kernel.org
	public-inbox-index linux-omap

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-omap


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git