Linux-OMAP Archive on lore.kernel.org
 help / color / Atom feed
From: Trent Piepho <tpiepho@gmail.com>
To: Drew Fustini <drew@beagleboard.org>
Cc: Tony Lindgren <tony@atomide.com>,
	Rob Herring <robh+dt@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Jason Kridner <jkridner@beagleboard.org>,
	Robert Nelson <robertcnelson@gmail.com>,
	linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-gpio <linux-gpio@vger.kernel.org>
Subject: Re: [PATCH] ARM: dts: document pinctrl-single,pins when #pinctrl-cells = 2
Date: Thu, 17 Sep 2020 02:03:46 -0700
Message-ID: <CA+7tXii8rwBexgAHeqYsvBywhWLmk-Hf5_VWUU5bQkBREeFcSA@mail.gmail.com> (raw)
In-Reply-To: <20200914104352.2165818-1-drew@beagleboard.org>

On Mon, Sep 14, 2020 at 3:44 AM Drew Fustini <drew@beagleboard.org> wrote:
>
> +
> +When #pinctrl-cells = 2, then setting a pin for a device could be done with:
> +
> +       pinctrl-single,pins = <0xdc 0x30 0x07>;
> +
> +Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value.
> +See the device example and static board pins example below for more information.

Pin configuration and mux mode don't mean anything in pinctrl-single.
On another machine, mux mode might not be programmed this way or even
exist.  Or the location of bits would probably be different, and this
would seem to imply the 0x07 would get shifted to the correct location
for where the pin mux setting was on that machine's pinctrl registers.

It seems like it would be better to explain the values are ORed together.

What is the purpose of this change anyway?  It seems like in the end
it just does what it did before.  The data is now split into two cells
in the device tree, but why?

  reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-14 10:43 Drew Fustini
2020-09-17  9:03 ` Trent Piepho [this message]
2020-09-17  9:20   ` Drew Fustini
2020-09-17 10:00     ` Trent Piepho
2020-09-17 10:39       ` Drew Fustini
2020-09-23  6:57         ` Tony Lindgren
2020-09-24  1:34           ` Trent Piepho
2020-09-24  5:43             ` Tony Lindgren
2020-09-24  5:49               ` Trent Piepho
2020-09-24  6:06                 ` Tony Lindgren
2020-09-24  6:31                   ` Trent Piepho
2020-09-24  7:04                     ` Tony Lindgren
2020-09-29 20:15                       ` Trent Piepho
2020-09-30  5:15                         ` Tony Lindgren
2020-09-30  8:34                           ` Trent Piepho
2020-09-30  9:15                             ` Tony Lindgren
2020-09-30  9:34                               ` Trent Piepho
2020-09-30  9:47                                 ` Tony Lindgren
2020-09-30 18:50                                   ` Trent Piepho
2020-10-01  7:00                                     ` Tony Lindgren
2020-09-23  6:59 ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA+7tXii8rwBexgAHeqYsvBywhWLmk-Hf5_VWUU5bQkBREeFcSA@mail.gmail.com \
    --to=tpiepho@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=drew@beagleboard.org \
    --cc=jkridner@beagleboard.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=robertcnelson@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-OMAP Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-omap/0 linux-omap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-omap linux-omap/ https://lore.kernel.org/linux-omap \
		linux-omap@vger.kernel.org
	public-inbox-index linux-omap

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-omap


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git