* [PATCH net v3] net: ethernet: ti: fix build and remove TI_CPTS_MOD workaround
@ 2020-05-08 9:59 Grygorii Strashko
2020-05-08 10:10 ` Arnd Bergmann
0 siblings, 1 reply; 6+ messages in thread
From: Grygorii Strashko @ 2020-05-08 9:59 UTC (permalink / raw)
To: Arnd Bergmann, netdev, Tony Lindgren, David S. Miller, Russell King
Cc: linux-kernel, linux-omap, Richard Cochran, Clay McClure,
Dan Murphy, Murali Karicheri, Grygorii Strashko
From: Clay McClure <clay@daemons.net>
My recent commit b6d49cab44b5 ("net: Make PTP-specific drivers depend on
PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select
TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the
form:
drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop':
cpsw.c:(.text+0x680): undefined reference to `cpts_unregister'
...
That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of
cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these
configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts
functions) _is_ enabled. So we end up compiling calls to functions that
don't exist, resulting in the linker errors.
This patch fixes build errors and restores previous behavior by:
- ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built
- use IS_REACHABLE(CONFIG_TI_CPTS) in code instead of IS_ENABLED()
- remove TI_CPTS_MOD and, instead, add dependencies from CPTS in
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below:
config TI_CPSW_SWITCHDEV
...
depends on TI_CPTS || !TI_CPTS
which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS ->
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection.
Note. For NFS boot + CPTS all of above configs have to be built-in.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Fixes: b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Clay McClure <clay@daemons.net>
[grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
arch/arm/configs/keystone_defconfig | 1 +
arch/arm/configs/omap2plus_defconfig | 1 +
drivers/net/ethernet/ti/Kconfig | 16 ++++++----------
drivers/net/ethernet/ti/Makefile | 2 +-
drivers/net/ethernet/ti/cpsw_ethtool.c | 2 +-
drivers/net/ethernet/ti/cpts.h | 3 +--
drivers/net/ethernet/ti/netcp_ethss.c | 10 +++++-----
7 files changed, 16 insertions(+), 19 deletions(-)
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 11e2211f9007..84a3b055f253 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -147,6 +147,7 @@ CONFIG_I2C_DAVINCI=y
CONFIG_SPI=y
CONFIG_SPI_DAVINCI=y
CONFIG_SPI_SPIDEV=y
+CONFIG_PTP_1588_CLOCK=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 395588209b27..c3f749650d5d 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -274,6 +274,7 @@ CONFIG_SPI_TI_QSPI=m
CONFIG_HSI=m
CONFIG_OMAP_SSI=m
CONFIG_SSI_PROTOCOL=m
+CONFIG_PTP_1588_CLOCK=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 8e348780efb6..62f809b67469 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -49,6 +49,7 @@ config TI_CPSW_PHY_SEL
config TI_CPSW
tristate "TI CPSW Switch Support"
depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST
+ depends on TI_CPTS || !TI_CPTS
select TI_DAVINCI_MDIO
select MFD_SYSCON
select PAGE_POOL
@@ -64,6 +65,7 @@ config TI_CPSW_SWITCHDEV
tristate "TI CPSW Switch Support with switchdev"
depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST
depends on NET_SWITCHDEV
+ depends on TI_CPTS || !TI_CPTS
select PAGE_POOL
select TI_DAVINCI_MDIO
select MFD_SYSCON
@@ -77,23 +79,16 @@ config TI_CPSW_SWITCHDEV
will be called cpsw_new.
config TI_CPTS
- bool "TI Common Platform Time Sync (CPTS) Support"
- depends on TI_CPSW || TI_KEYSTONE_NETCP || TI_CPSW_SWITCHDEV || COMPILE_TEST
+ tristate "TI Common Platform Time Sync (CPTS) Support"
+ depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
depends on COMMON_CLK
- depends on POSIX_TIMERS
+ depends on PTP_1588_CLOCK
---help---
This driver supports the Common Platform Time Sync unit of
the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem.
The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the
driver offers a PTP Hardware Clock.
-config TI_CPTS_MOD
- tristate
- depends on TI_CPTS
- depends on PTP_1588_CLOCK
- default y if TI_CPSW=y || TI_KEYSTONE_NETCP=y || TI_CPSW_SWITCHDEV=y
- default m
-
config TI_K3_AM65_CPSW_NUSS
tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER
@@ -114,6 +109,7 @@ config TI_KEYSTONE_NETCP
select TI_DAVINCI_MDIO
depends on OF
depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
+ depends on TI_CPTS || !TI_CPTS
---help---
This driver supports TI's Keystone NETCP Core.
diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile
index 53792190e9c2..cb26a9d21869 100644
--- a/drivers/net/ethernet/ti/Makefile
+++ b/drivers/net/ethernet/ti/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_TI_DAVINCI_EMAC) += ti_davinci_emac.o
ti_davinci_emac-y := davinci_emac.o davinci_cpdma.o
obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
obj-$(CONFIG_TI_CPSW_PHY_SEL) += cpsw-phy-sel.o
-obj-$(CONFIG_TI_CPTS_MOD) += cpts.o
+obj-$(CONFIG_TI_CPTS) += cpts.o
obj-$(CONFIG_TI_CPSW) += ti_cpsw.o
ti_cpsw-y := cpsw.o davinci_cpdma.o cpsw_ale.o cpsw_priv.o cpsw_sl.o cpsw_ethtool.o
obj-$(CONFIG_TI_CPSW_SWITCHDEV) += ti_cpsw_new.o
diff --git a/drivers/net/ethernet/ti/cpsw_ethtool.c b/drivers/net/ethernet/ti/cpsw_ethtool.c
index fa54efe3be63..19a7370a4188 100644
--- a/drivers/net/ethernet/ti/cpsw_ethtool.c
+++ b/drivers/net/ethernet/ti/cpsw_ethtool.c
@@ -709,7 +709,7 @@ int cpsw_set_ringparam(struct net_device *ndev,
return ret;
}
-#if IS_ENABLED(CONFIG_TI_CPTS)
+#if IS_REACHABLE(CONFIG_TI_CPTS)
int cpsw_get_ts_info(struct net_device *ndev, struct ethtool_ts_info *info)
{
struct cpsw_common *cpsw = ndev_to_cpsw(ndev);
diff --git a/drivers/net/ethernet/ti/cpts.h b/drivers/net/ethernet/ti/cpts.h
index bb997c11ee15..782e24c78e7a 100644
--- a/drivers/net/ethernet/ti/cpts.h
+++ b/drivers/net/ethernet/ti/cpts.h
@@ -8,7 +8,7 @@
#ifndef _TI_CPTS_H_
#define _TI_CPTS_H_
-#if IS_ENABLED(CONFIG_TI_CPTS)
+#if IS_REACHABLE(CONFIG_TI_CPTS)
#include <linux/clk.h>
#include <linux/clkdev.h>
@@ -171,5 +171,4 @@ static inline bool cpts_can_timestamp(struct cpts *cpts, struct sk_buff *skb)
}
#endif
-
#endif
diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c
index fb36115e9c51..3de1d25128b7 100644
--- a/drivers/net/ethernet/ti/netcp_ethss.c
+++ b/drivers/net/ethernet/ti/netcp_ethss.c
@@ -181,7 +181,7 @@
#define HOST_TX_PRI_MAP_DEFAULT 0x00000000
-#if IS_ENABLED(CONFIG_TI_CPTS)
+#if IS_REACHABLE(CONFIG_TI_CPTS)
/* Px_TS_CTL register fields */
#define TS_RX_ANX_F_EN BIT(0)
#define TS_RX_VLAN_LT1_EN BIT(1)
@@ -2000,7 +2000,7 @@ static int keystone_set_link_ksettings(struct net_device *ndev,
return phy_ethtool_ksettings_set(phy, cmd);
}
-#if IS_ENABLED(CONFIG_TI_CPTS)
+#if IS_REACHABLE(CONFIG_TI_CPTS)
static int keystone_get_ts_info(struct net_device *ndev,
struct ethtool_ts_info *info)
{
@@ -2532,7 +2532,7 @@ static int gbe_del_vid(void *intf_priv, int vid)
return 0;
}
-#if IS_ENABLED(CONFIG_TI_CPTS)
+#if IS_REACHABLE(CONFIG_TI_CPTS)
static void gbe_txtstamp(void *context, struct sk_buff *skb)
{
@@ -2977,7 +2977,7 @@ static int gbe_close(void *intf_priv, struct net_device *ndev)
return 0;
}
-#if IS_ENABLED(CONFIG_TI_CPTS)
+#if IS_REACHABLE(CONFIG_TI_CPTS)
static void init_slave_ts_ctl(struct gbe_slave *slave)
{
slave->ts_ctl.uni = 1;
@@ -3718,7 +3718,7 @@ static int gbe_probe(struct netcp_device *netcp_device, struct device *dev,
gbe_dev->cpts = cpts_create(gbe_dev->dev, gbe_dev->cpts_reg, cpts_node);
of_node_put(cpts_node);
- if (IS_ENABLED(CONFIG_TI_CPTS) && IS_ERR(gbe_dev->cpts)) {
+ if (IS_REACHABLE(CONFIG_TI_CPTS) && IS_ERR(gbe_dev->cpts)) {
ret = PTR_ERR(gbe_dev->cpts);
goto free_sec_ports;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH net v3] net: ethernet: ti: fix build and remove TI_CPTS_MOD workaround
2020-05-08 9:59 [PATCH net v3] net: ethernet: ti: fix build and remove TI_CPTS_MOD workaround Grygorii Strashko
@ 2020-05-08 10:10 ` Arnd Bergmann
2020-05-08 11:14 ` Grygorii Strashko
0 siblings, 1 reply; 6+ messages in thread
From: Arnd Bergmann @ 2020-05-08 10:10 UTC (permalink / raw)
To: Grygorii Strashko
Cc: Networking, Tony Lindgren, David S. Miller, Russell King,
linux-kernel, linux-omap, Richard Cochran, Clay McClure,
Dan Murphy, Murali Karicheri
On Fri, May 8, 2020 at 11:59 AM Grygorii Strashko
<grygorii.strashko@ti.com> wrote:
>
> From: Clay McClure <clay@daemons.net>
>
> My recent commit b6d49cab44b5 ("net: Make PTP-specific drivers depend on
> PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select
> TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the
> form:
>
> drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop':
> cpsw.c:(.text+0x680): undefined reference to `cpts_unregister'
> ...
>
> That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of
> cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these
> configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts
> functions) _is_ enabled. So we end up compiling calls to functions that
> don't exist, resulting in the linker errors.
>
> This patch fixes build errors and restores previous behavior by:
> - ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built
> - use IS_REACHABLE(CONFIG_TI_CPTS) in code instead of IS_ENABLED()
I don't understand what IS_REACHABLE() is needed for once all the other
changes are in place. I'd hope we can avoid that. Do you still see
failures without
that or is it just a precaution. I can do some randconfig testing on your patch
to see what else might be needed to avoid IS_REACHABLE().
Arnd
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH net v3] net: ethernet: ti: fix build and remove TI_CPTS_MOD workaround
2020-05-08 10:10 ` Arnd Bergmann
@ 2020-05-08 11:14 ` Grygorii Strashko
2020-05-08 11:25 ` Arnd Bergmann
0 siblings, 1 reply; 6+ messages in thread
From: Grygorii Strashko @ 2020-05-08 11:14 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Networking, Tony Lindgren, David S. Miller, Russell King,
linux-kernel, linux-omap, Richard Cochran, Clay McClure,
Dan Murphy, Murali Karicheri
On 08/05/2020 13:10, Arnd Bergmann wrote:
> On Fri, May 8, 2020 at 11:59 AM Grygorii Strashko
> <grygorii.strashko@ti.com> wrote:
>>
>> From: Clay McClure <clay@daemons.net>
>>
>> My recent commit b6d49cab44b5 ("net: Make PTP-specific drivers depend on
>> PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select
>> TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the
>> form:
>>
>> drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop':
>> cpsw.c:(.text+0x680): undefined reference to `cpts_unregister'
>> ...
>>
>> That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of
>> cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these
>> configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts
>> functions) _is_ enabled. So we end up compiling calls to functions that
>> don't exist, resulting in the linker errors.
>>
>> This patch fixes build errors and restores previous behavior by:
>> - ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built
>> - use IS_REACHABLE(CONFIG_TI_CPTS) in code instead of IS_ENABLED()
>
> I don't understand what IS_REACHABLE() is needed for once all the other
> changes are in place. I'd hope we can avoid that. Do you still see
> failures without
> that or is it just a precaution. I can do some randconfig testing on your patch
> to see what else might be needed to avoid IS_REACHABLE().
I've not changed this part of original patch, but seems you're right.
I can drop it and resend, but, unfortunately, i do not have time today for full build testing.
Sorry.
By the way in ptp_clock_kernel.h
#if IS_REACHABLE(CONFIG_PTP_1588_CLOCK)
--
Best regards,
grygorii
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH net v3] net: ethernet: ti: fix build and remove TI_CPTS_MOD workaround
2020-05-08 11:14 ` Grygorii Strashko
@ 2020-05-08 11:25 ` Arnd Bergmann
2020-05-12 8:35 ` Grygorii Strashko
0 siblings, 1 reply; 6+ messages in thread
From: Arnd Bergmann @ 2020-05-08 11:25 UTC (permalink / raw)
To: Grygorii Strashko
Cc: Networking, Tony Lindgren, David S. Miller, Russell King,
linux-kernel, linux-omap, Richard Cochran, Clay McClure,
Dan Murphy, Murali Karicheri
On Fri, May 8, 2020 at 1:14 PM Grygorii Strashko
<grygorii.strashko@ti.com> wrote:
> On 08/05/2020 13:10, Arnd Bergmann wrote:
> > On Fri, May 8, 2020 at 11:59 AM Grygorii Strashko
> >> That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of
> >> cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these
> >> configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts
> >> functions) _is_ enabled. So we end up compiling calls to functions that
> >> don't exist, resulting in the linker errors.
> >>
> >> This patch fixes build errors and restores previous behavior by:
> >> - ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built
> >> - use IS_REACHABLE(CONFIG_TI_CPTS) in code instead of IS_ENABLED()
> >
> > I don't understand what IS_REACHABLE() is needed for once all the other
> > changes are in place. I'd hope we can avoid that. Do you still see
> > failures without
> > that or is it just a precaution. I can do some randconfig testing on your patch
> > to see what else might be needed to avoid IS_REACHABLE().
>
> I've not changed this part of original patch, but seems you're right.
>
> I can drop it and resend, but, unfortunately, i do not have time today for full build testing.
I have applied to patch locally to my randconfig tree, with the IS_REACHABLE()
changes taken out.
> By the way in ptp_clock_kernel.h
> #if IS_REACHABLE(CONFIG_PTP_1588_CLOCK)
This should also be changed I think, but it can wait for another day.
Arnd
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH net v3] net: ethernet: ti: fix build and remove TI_CPTS_MOD workaround
2020-05-08 11:25 ` Arnd Bergmann
@ 2020-05-12 8:35 ` Grygorii Strashko
2020-05-12 8:53 ` Arnd Bergmann
0 siblings, 1 reply; 6+ messages in thread
From: Grygorii Strashko @ 2020-05-12 8:35 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Networking, Tony Lindgren, David S. Miller, Russell King,
linux-kernel, linux-omap, Richard Cochran, Clay McClure,
Dan Murphy, Murali Karicheri
Hi Arnd,
On 08/05/2020 14:25, Arnd Bergmann wrote:
> On Fri, May 8, 2020 at 1:14 PM Grygorii Strashko
> <grygorii.strashko@ti.com> wrote:
>> On 08/05/2020 13:10, Arnd Bergmann wrote:
>>> On Fri, May 8, 2020 at 11:59 AM Grygorii Strashko
>
>>>> That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of
>>>> cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these
>>>> configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts
>>>> functions) _is_ enabled. So we end up compiling calls to functions that
>>>> don't exist, resulting in the linker errors.
>>>>
>>>> This patch fixes build errors and restores previous behavior by:
>>>> - ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built
>>>> - use IS_REACHABLE(CONFIG_TI_CPTS) in code instead of IS_ENABLED()
>>>
>>> I don't understand what IS_REACHABLE() is needed for once all the other
>>> changes are in place. I'd hope we can avoid that. Do you still see
>>> failures without
>>> that or is it just a precaution. I can do some randconfig testing on your patch
>>> to see what else might be needed to avoid IS_REACHABLE().
>>
>> I've not changed this part of original patch, but seems you're right.
>>
>> I can drop it and resend, but, unfortunately, i do not have time today for full build testing.
>
> I have applied to patch locally to my randconfig tree, with the IS_REACHABLE()
> changes taken out.
>
What will be the conclusion here?
--
Best regards,
grygorii
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH net v3] net: ethernet: ti: fix build and remove TI_CPTS_MOD workaround
2020-05-12 8:35 ` Grygorii Strashko
@ 2020-05-12 8:53 ` Arnd Bergmann
0 siblings, 0 replies; 6+ messages in thread
From: Arnd Bergmann @ 2020-05-12 8:53 UTC (permalink / raw)
To: Grygorii Strashko
Cc: Networking, Tony Lindgren, David S. Miller, Russell King,
linux-kernel, linux-omap, Richard Cochran, Clay McClure,
Dan Murphy, Murali Karicheri
On Tue, May 12, 2020 at 10:35 AM Grygorii Strashko
<grygorii.strashko@ti.com> wrote:
>
> Hi Arnd,
>
> On 08/05/2020 14:25, Arnd Bergmann wrote:
> > On Fri, May 8, 2020 at 1:14 PM Grygorii Strashko
> > <grygorii.strashko@ti.com> wrote:
> >> On 08/05/2020 13:10, Arnd Bergmann wrote:
> >>> On Fri, May 8, 2020 at 11:59 AM Grygorii Strashko
> >
> >>>> That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of
> >>>> cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these
> >>>> configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts
> >>>> functions) _is_ enabled. So we end up compiling calls to functions that
> >>>> don't exist, resulting in the linker errors.
> >>>>
> >>>> This patch fixes build errors and restores previous behavior by:
> >>>> - ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built
> >>>> - use IS_REACHABLE(CONFIG_TI_CPTS) in code instead of IS_ENABLED()
> >>>
> >>> I don't understand what IS_REACHABLE() is needed for once all the other
> >>> changes are in place. I'd hope we can avoid that. Do you still see
> >>> failures without
> >>> that or is it just a precaution. I can do some randconfig testing on your patch
> >>> to see what else might be needed to avoid IS_REACHABLE().
> >>
> >> I've not changed this part of original patch, but seems you're right.
> >>
> >> I can drop it and resend, but, unfortunately, i do not have time today for full build testing.
> >
> > I have applied to patch locally to my randconfig tree, with the IS_REACHABLE()
> > changes taken out.
> >
>
> What will be the conclusion here?
I have seen no other problems with it, please leave out the the IS_REACHABLE()
changes and just use the dependencies.
Arnd
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-05-12 8:53 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-08 9:59 [PATCH net v3] net: ethernet: ti: fix build and remove TI_CPTS_MOD workaround Grygorii Strashko
2020-05-08 10:10 ` Arnd Bergmann
2020-05-08 11:14 ` Grygorii Strashko
2020-05-08 11:25 ` Arnd Bergmann
2020-05-12 8:35 ` Grygorii Strashko
2020-05-12 8:53 ` Arnd Bergmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).