From: Ard Biesheuvel <ardb@kernel.org> To: Robin Murphy <robin.murphy@arm.com> Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>, Kishon Vijay Abraham I <kishon@ti.com>, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>, Rob Herring <robh@kernel.org>, Bjorn Helgaas <bhelgaas@google.com>, Jingoo Han <jingoohan1@gmail.com>, Gustavo Pimentel <gustavo.pimentel@synopsys.com>, PCI <linux-pci@vger.kernel.org>, linux-omap <linux-omap@vger.kernel.org>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, Linux ARM <linux-arm-kernel@lists.infradead.org> Subject: Re: [PATCH v7 2/2] PCI: dwc: Fix MSI page leakage in suspend/resume Date: Wed, 14 Oct 2020 18:52:05 +0200 [thread overview] Message-ID: <CAMj1kXGZnFLaGAFuyMPC8c8TPKf25d1matV9UT2AD2LqO1Rbpw@mail.gmail.com> (raw) In-Reply-To: <38a00dde-598f-b6de-ecf3-5d012bd7594a@arm.com> On Mon, 12 Oct 2020 at 13:38, Robin Murphy <robin.murphy@arm.com> wrote: > > On 2020-10-09 08:55, Jisheng Zhang wrote: > > Currently, dw_pcie_msi_init() allocates and maps page for msi, then > > program the PCIE_MSI_ADDR_LO and PCIE_MSI_ADDR_HI. The Root Complex > > may lose power during suspend-to-RAM, so when we resume, we want to > > redo the latter but not the former. If designware based driver (for > > example, pcie-tegra194.c) calls dw_pcie_msi_init() in resume path, the > > msi page will be leaked. > > > > As pointed out by Rob and Ard, there's no need to allocate a page for > > the MSI address, we could use an address in the driver data. > > > > To avoid map the MSI msg again during resume, we move the map MSI msg > > from dw_pcie_msi_init() to dw_pcie_host_init(). > > You should move the unmap there as well. As soon as you know what the > relevant address would be if you *were* to do DMA to this location, then > the exercise is complete. Leaving it mapped for the lifetime of the > device in order to do not-DMA to it seems questionable (and represents > technically incorrect API usage without at least a sync_for_cpu call > before any other access to the data). > > Another point of note is that using streaming DMA mappings at all is a > bit fragile (regardless of this change). If the host controller itself > has a limited DMA mask relative to physical memory (which integrators > still seem to keep doing...) then you could end up punching your MSI > hole right in the middle of the SWIOTLB bounce buffer, where it's then > almost *guaranteed* to interfere with real DMA :( > Wouldn't it be the unmap you are suggesting that would create this problem? If the bounce buffer is never released, the fake MSI doorbell address can never conflict with any other DMA mappings. > If no DWC users have that problem and the current code is working well > enough, then I see little reason not to make this partucular change to > tidy up the implementation, just bear in mind that there's always the > possibility of having to come back and change it yet again in future to > make it more robust. I had it in mind that this trick was done with a > coherent DMA allocation, which would be safe from addressing problems > but would need to be kept around for the lifetime of the device, but > maybe that was a different driver :/ > > Robin. > > > Suggested-by: Rob Herring <robh@kernel.org> > > Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> > > Reviewed-by: Rob Herring <robh@kernel.org> > > --- > > drivers/pci/controller/dwc/pci-dra7xx.c | 18 +++++++++- > > .../pci/controller/dwc/pcie-designware-host.c | 33 ++++++++++--------- > > drivers/pci/controller/dwc/pcie-designware.h | 2 +- > > 3 files changed, 36 insertions(+), 17 deletions(-) > > > > diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c > > index 8f0b6d644e4b..6d012d2b1e90 100644 > > --- a/drivers/pci/controller/dwc/pci-dra7xx.c > > +++ b/drivers/pci/controller/dwc/pci-dra7xx.c > > @@ -466,7 +466,9 @@ static struct irq_chip dra7xx_pci_msi_bottom_irq_chip = { > > static int dra7xx_pcie_msi_host_init(struct pcie_port *pp) > > { > > struct dw_pcie *pci = to_dw_pcie_from_pp(pp); > > + struct device *dev = pci->dev; > > u32 ctrl, num_ctrls; > > + int ret; > > > > pp->msi_irq_chip = &dra7xx_pci_msi_bottom_irq_chip; > > > > @@ -482,7 +484,21 @@ static int dra7xx_pcie_msi_host_init(struct pcie_port *pp) > > ~0); > > } > > > > - return dw_pcie_allocate_domains(pp); > > + ret = dw_pcie_allocate_domains(pp); > > + if (ret) > > + return ret; > > + > > + pp->msi_data = dma_map_single_attrs(dev, &pp->msi_msg, > > + sizeof(pp->msi_msg), > > + DMA_FROM_DEVICE, > > + DMA_ATTR_SKIP_CPU_SYNC); > > + ret = dma_mapping_error(dev, pp->msi_data); > > + if (ret) { > > + dev_err(dev, "Failed to map MSI data\n"); > > + pp->msi_data = 0; > > + dw_pcie_free_msi(pp); > > + } > > + return ret; > > } > > > > static const struct dw_pcie_host_ops dra7xx_pcie_host_ops = { > > diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c > > index d3e9ea11ce9e..d02c7e74738d 100644 > > --- a/drivers/pci/controller/dwc/pcie-designware-host.c > > +++ b/drivers/pci/controller/dwc/pcie-designware-host.c > > @@ -266,30 +266,23 @@ void dw_pcie_free_msi(struct pcie_port *pp) > > irq_domain_remove(pp->msi_domain); > > irq_domain_remove(pp->irq_domain); > > > > - if (pp->msi_page) > > - __free_page(pp->msi_page); > > + if (pp->msi_data) { > > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); > > + struct device *dev = pci->dev; > > + > > + dma_unmap_single_attrs(dev, pp->msi_data, sizeof(pp->msi_msg), > > + DMA_FROM_DEVICE, DMA_ATTR_SKIP_CPU_SYNC); > > + } > > } > > > > void dw_pcie_msi_init(struct pcie_port *pp) > > { > > struct dw_pcie *pci = to_dw_pcie_from_pp(pp); > > - struct device *dev = pci->dev; > > - u64 msi_target; > > + u64 msi_target = (u64)pp->msi_data; > > > > if (!IS_ENABLED(CONFIG_PCI_MSI)) > > return; > > > > - pp->msi_page = alloc_page(GFP_KERNEL); > > - pp->msi_data = dma_map_page(dev, pp->msi_page, 0, PAGE_SIZE, > > - DMA_FROM_DEVICE); > > - if (dma_mapping_error(dev, pp->msi_data)) { > > - dev_err(dev, "Failed to map MSI data\n"); > > - __free_page(pp->msi_page); > > - pp->msi_page = NULL; > > - return; > > - } > > - msi_target = (u64)pp->msi_data; > > - > > /* Program the msi_data */ > > dw_pcie_writel_dbi(pci, PCIE_MSI_ADDR_LO, lower_32_bits(msi_target)); > > dw_pcie_writel_dbi(pci, PCIE_MSI_ADDR_HI, upper_32_bits(msi_target)); > > @@ -394,6 +387,16 @@ int dw_pcie_host_init(struct pcie_port *pp) > > irq_set_chained_handler_and_data(pp->msi_irq, > > dw_chained_msi_isr, > > pp); > > + > > + pp->msi_data = dma_map_single_attrs(pci->dev, &pp->msi_msg, > > + sizeof(pp->msi_msg), > > + DMA_FROM_DEVICE, > > + DMA_ATTR_SKIP_CPU_SYNC); > > + if (dma_mapping_error(pci->dev, pp->msi_data)) { > > + dev_err(pci->dev, "Failed to map MSI data\n"); > > + pp->msi_data = 0; > > + goto err_free_msi; > > + } > > } else { > > ret = pp->ops->msi_host_init(pp); > > if (ret < 0) > > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h > > index 97c7063b9e89..9d2f511f13fa 100644 > > --- a/drivers/pci/controller/dwc/pcie-designware.h > > +++ b/drivers/pci/controller/dwc/pcie-designware.h > > @@ -190,8 +190,8 @@ struct pcie_port { > > int msi_irq; > > struct irq_domain *irq_domain; > > struct irq_domain *msi_domain; > > + u16 msi_msg; > > dma_addr_t msi_data; > > - struct page *msi_page; > > struct irq_chip *msi_irq_chip; > > u32 num_vectors; > > u32 irq_mask[MAX_MSI_CTRLS]; > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-10-14 16:52 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-09 7:53 [PATCH v7 0/2] PCI: dwc: fix two MSI issues Jisheng Zhang 2020-10-09 7:54 ` [PATCH v7 1/2] PCI: dwc: Skip PCIE_MSI_INTR0* programming if MSI is disabled Jisheng Zhang 2020-10-09 7:55 ` [PATCH v7 2/2] PCI: dwc: Fix MSI page leakage in suspend/resume Jisheng Zhang 2020-10-12 11:37 ` Robin Murphy 2020-10-12 15:35 ` Vidya Sagar 2020-10-14 14:15 ` Rob Herring 2020-10-14 14:49 ` Robin Murphy 2020-10-14 16:52 ` Ard Biesheuvel [this message] 2020-10-14 17:08 ` Robin Murphy 2020-10-09 8:49 ` [PATCH v7 0/2] PCI: dwc: fix two MSI issues Lorenzo Pieralisi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=CAMj1kXGZnFLaGAFuyMPC8c8TPKf25d1matV9UT2AD2LqO1Rbpw@mail.gmail.com \ --to=ardb@kernel.org \ --cc=Jisheng.Zhang@synaptics.com \ --cc=bhelgaas@google.com \ --cc=gustavo.pimentel@synopsys.com \ --cc=jingoohan1@gmail.com \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=lorenzo.pieralisi@arm.com \ --cc=robh@kernel.org \ --cc=robin.murphy@arm.com \ --subject='Re: [PATCH v7 2/2] PCI: dwc: Fix MSI page leakage in suspend/resume' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).