linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/2] ARM: dts: omap3-echo: Update LED configuration
@ 2021-01-30 12:25 André Hentschel
  2021-01-30 12:25 ` [PATCH 2/2] ARM: dts: omap3-echo: Add ath6kl node André Hentschel
  2021-03-24 12:04 ` [PATCH 1/2] ARM: dts: omap3-echo: Update LED configuration Tony Lindgren
  0 siblings, 2 replies; 3+ messages in thread
From: André Hentschel @ 2021-01-30 12:25 UTC (permalink / raw)
  To: robh+dt, bcousson, tony, linux-omap; +Cc: devicetree, linux-kernel

Signed-off-by: André Hentschel <nerv@dawncrow.de>
---

Changes made in 54212f5a1ba3123281877e54c1e5f672bf7563d8 and previous commits broke with the way
the LED drivers were described in device-trees before. These adjustments fix that.

 arch/arm/boot/dts/omap3-echo.dts | 469 ++++++++++++++++++++++---------
 1 file changed, 329 insertions(+), 140 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts
index b9fd113979f2..3382480d5f19 100644
--- a/arch/arm/boot/dts/omap3-echo.dts
+++ b/arch/arm/boot/dts/omap3-echo.dts
@@ -7,6 +7,7 @@
 #include "dm3725.dtsi"
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Amazon Echo (first generation)";
@@ -139,179 +140,367 @@ &i2c2 {
 	clock-frequency = <400000>;
 
 	lp5523A: lp5523A@32 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		label = "q1";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 		enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
 
-		chan0 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan1 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan2 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan3 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan4 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan5 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan6 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan7 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan8 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@0 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x0>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@1 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@6 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x6>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@2 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x3>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@7 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x7>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@4 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x4>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@5 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x5>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@8 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x8>;
+				color = <LED_COLOR_ID_RED>;
+			};
 		};
 	};
 
 	lp5523B: lp5523B@33 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		label = "q3";
 		reg = <0x33>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 
-		chan0 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan1 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan2 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan3 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan4 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan5 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan6 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan7 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan8 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@0 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x0>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@1 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@6 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x6>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@2 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x3>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@7 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x7>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@4 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x4>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@5 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x5>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@8 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x8>;
+				color = <LED_COLOR_ID_RED>;
+			};
 		};
 	};
 
 	lp5523C: lp5523C@34 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		label = "q4";
 		reg = <0x34>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 
-		chan0 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan1 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan2 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan3 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan4 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan5 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan6 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan7 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan8 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@0 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x0>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@1 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@6 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x6>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@2 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x3>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@7 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x7>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@4 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x4>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@5 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x5>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@8 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x8>;
+				color = <LED_COLOR_ID_RED>;
+			};
 		};
 	};
 
 	lp5523D: lp552D@35 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		label = "q2";
 		reg = <0x35>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 
-		chan0 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan1 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan2 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan3 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan4 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan5 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan6 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan7 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan8 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@0 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x0>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@1 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@6 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x6>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@2 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x3>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@7 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x7>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@4 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x4>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@5 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x5>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@8 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x8>;
+				color = <LED_COLOR_ID_RED>;
+			};
 		};
 	};
 };
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH 2/2] ARM: dts: omap3-echo: Add ath6kl node
  2021-01-30 12:25 [PATCH 1/2] ARM: dts: omap3-echo: Update LED configuration André Hentschel
@ 2021-01-30 12:25 ` André Hentschel
  2021-03-24 12:04 ` [PATCH 1/2] ARM: dts: omap3-echo: Update LED configuration Tony Lindgren
  1 sibling, 0 replies; 3+ messages in thread
From: André Hentschel @ 2021-01-30 12:25 UTC (permalink / raw)
  To: robh+dt, bcousson, tony, linux-omap; +Cc: devicetree, linux-kernel

Signed-off-by: André Hentschel <nerv@dawncrow.de>
---

Attention, here I am not sure if this is supposed to work like that. The ath6kl driver needs to
be loaded as a module anyway and automatically find the right device. So this might be useful for
documentation purpose, but also might be wrong device-tree wise.

 arch/arm/boot/dts/omap3-echo.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts
index 3382480d5f19..8f02ff5e7da6 100644
--- a/arch/arm/boot/dts/omap3-echo.dts
+++ b/arch/arm/boot/dts/omap3-echo.dts
@@ -606,6 +606,8 @@ &mmc2 {
 };
 
 &mmc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 	bus-width = <4>;
 	pinctrl-names = "default";
@@ -615,6 +617,11 @@ &mmc3 {
 	mmc-pwrseq = <&sdio_pwrseq>;
 	vmmc-supply = <&vcc3v3>;
 	vqmmc-supply = <&vcc1v8>;
+	atheros@0 {
+		compatible = "atheros,ath6kl";
+		reg = <0>;
+		bus-width = <4>;
+	};
 };
 
 &tps {
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH 1/2] ARM: dts: omap3-echo: Update LED configuration
  2021-01-30 12:25 [PATCH 1/2] ARM: dts: omap3-echo: Update LED configuration André Hentschel
  2021-01-30 12:25 ` [PATCH 2/2] ARM: dts: omap3-echo: Add ath6kl node André Hentschel
@ 2021-03-24 12:04 ` Tony Lindgren
  1 sibling, 0 replies; 3+ messages in thread
From: Tony Lindgren @ 2021-03-24 12:04 UTC (permalink / raw)
  To: André Hentschel
  Cc: robh+dt, bcousson, linux-omap, devicetree, linux-kernel

* André Hentschel <nerv@dawncrow.de> [210130 14:29]:
> Changes made in 54212f5a1ba3123281877e54c1e5f672bf7563d8 and previous commits broke with the way
> the LED drivers were described in device-trees before. These adjustments fix that.

Thanks applying both into omap-for-v5.13/dt.

Tony

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-03-24 12:04 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-30 12:25 [PATCH 1/2] ARM: dts: omap3-echo: Update LED configuration André Hentschel
2021-01-30 12:25 ` [PATCH 2/2] ARM: dts: omap3-echo: Add ath6kl node André Hentschel
2021-03-24 12:04 ` [PATCH 1/2] ARM: dts: omap3-echo: Update LED configuration Tony Lindgren

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).