Linux-OMAP Archive on lore.kernel.org
 help / color / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Tom Joseph <tjoseph@cadence.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v8 00/15] Add PCIe support to TI's J721E SoC
Date: Thu, 23 Jul 2020 15:42:17 +0530
Message-ID: <bc8ec8a2-9869-c170-7497-df3b6279fe97@ti.com> (raw)
In-Reply-To: <20200723100258.GA7195@e121166-lin.cambridge.arm.com>



On 7/23/2020 3:32 PM, Lorenzo Pieralisi wrote:
> On Wed, Jul 22, 2020 at 04:33:02PM +0530, Kishon Vijay Abraham I wrote:
>> TI's J721E SoC uses Cadence PCIe core to implement both RC mode
>> and EP mode.
>>
>> The high level features are:
>>   *) Supports Legacy, MSI and MSI-X interrupt
>>   *) Supports upto GEN4 speed mode
>>   *) Supports SR-IOV
>>   *) Supports multiple physical function
>>   *) Ability to route all transactions via SMMU
>>
>> This patch series
>>   *) Add support in Cadence PCIe core to be used for TI's J721E SoC
>>   *) Add a driver for J721E PCIe wrapper
>>
>> v1 of the series can be found @ [1]
>> v2 of the series can be found @ [2]
>> v3 of the series can be found @ [5]
>> v4 of the series can be found @ [6]
>> v5 of the series can be found @ [7]
>> v6 of the series can be found @ [8]
>> v7 of the series can be found @ [9]
>>
>> Changes from v7:
>> 1) Replaced WARN with pr_warn
>> 2) Included support for "dma-ranges" property patch in this series [10]
>>
>> Changes from v6:
>> 1) Fixed bot found errors running 'make dt_binding_check'
>>
>> Changes from v5:
>> 1) Added Reviewed-by: for PATCH #6
>> 2) Protect writes to PCI_STATUS with spin_lock during raising interrupts
>>    in EP mode to reduce the time between read and write of RMW.
>>
>> Changes from v4:
>> 1) Added Reviewed-by: & Acked-by: tags from RobH
>> 2) Removed un-used accessors for pcie-cadence.h and removed having ops
>>    for read/write accessors
>> 3) Updated cdns,cdns-pcie-host.yaml to remove "mem" from reg
>>
>> Changes from v3:
>> 1) Changed the order of files in MAINTAINTERS file to fix Joe's comments
>> 2) Fixed indentation and added Reviewed-by: Rob Herring <robh@kernel.org>
>> 3) Cleaned up computing msix_tbl
>> 4) Fixed RobH's comment on J721E driver
>>
>> Changes from v2:
>> 1) Converting Cadence binding to YAML schema was done as a
>>    separate series [3] & [4]. [3] is merged and [4] is
>>    pending.
>> 2) Included MSI-X support in this series
>> 3) Added link down interrupt handling (only error message)
>> 4) Rebased to latest 5.7-rc1
>> 5) Adapted TI J721E binding to [3] & [4]
>>
>> Changes from v1:
>> 1) Added DT schemas cdns-pcie-host.yaml, cdns-pcie-ep.yaml and
>>    cdns-pcie.yaml for Cadence PCIe core and included it in
>>    TI's PCIe DT schema.
>> 2) Added cpu_addr_fixup() for Cadence Platform driver.
>> 3) Fixed subject/description/renamed functions as commented by
>>    Andrew Murray.
>>
>> [1] -> http://lore.kernel.org/r/20191209092147.22901-1-kishon@ti.com
>> [2] -> http://lore.kernel.org/r/20200106102058.19183-1-kishon@ti.com
>> [3] -> http://lore.kernel.org/r/20200305103017.16706-1-kishon@ti.com
>> [4] -> http://lore.kernel.org/r/20200417114322.31111-1-kishon@ti.com
>> [5] -> http://lore.kernel.org/r/20200417125753.13021-1-kishon@ti.com
>> [6] -> http://lore.kernel.org/r/20200506151429.12255-1-kishon@ti.com
>> [7] -> http://lore.kernel.org/r/20200522033631.32574-1-kishon@ti.com
>> [8] -> http://lore.kernel.org/r/20200708093018.28474-1-kishon@ti.com
>> [9] -> http://lore.kernel.org/r/20200713110141.13156-1-kishon@ti.com
>> [10] -> http://lore.kernel.org/r/20200521080153.5902-1-kishon@ti.com
>>
>> Alan Douglas (1):
>>   PCI: cadence: Add MSI-X support to Endpoint driver
>>
>> Kishon Vijay Abraham I (14):
>>   PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits"
>>     property
>>   PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path
>>   linux/kernel.h: Add PTR_ALIGN_DOWN macro
>>   PCI: cadence: Convert all r/w accessors to perform only 32-bit
>>     accesses
>>   PCI: cadence: Add support to start link and verify link status
>>   PCI: cadence: Allow pci_host_bridge to have custom pci_ops
>>   dt-bindings: PCI: cadence: Remove "mem" from reg binding
>>   PCI: cadence: Add new *ops* for CPU addr fixup
>>   PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register
>>   dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
>>   dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
>>   PCI: j721e: Add TI J721E PCIe driver
>>   misc: pci_endpoint_test: Add J721E in pci_device_id table
>>   MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
>>
>>  .../bindings/pci/cdns,cdns-pcie-host.yaml     |   8 +-
>>  .../bindings/pci/ti,j721e-pci-ep.yaml         |  94 ++++
>>  .../bindings/pci/ti,j721e-pci-host.yaml       | 113 ++++
>>  MAINTAINERS                                   |   4 +-
>>  drivers/misc/pci_endpoint_test.c              |   9 +
>>  drivers/pci/controller/cadence/Kconfig        |  23 +
>>  drivers/pci/controller/cadence/Makefile       |   1 +
>>  drivers/pci/controller/cadence/pci-j721e.c    | 493 ++++++++++++++++++
>>  .../pci/controller/cadence/pcie-cadence-ep.c  | 129 ++++-
>>  .../controller/cadence/pcie-cadence-host.c    | 310 +++++++++--
>>  .../controller/cadence/pcie-cadence-plat.c    |  13 +
>>  drivers/pci/controller/cadence/pcie-cadence.c |   8 +-
>>  drivers/pci/controller/cadence/pcie-cadence.h | 161 +++++-
>>  include/linux/kernel.h                        |   1 +
>>  14 files changed, 1297 insertions(+), 70 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
>>  create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>>  create mode 100644 drivers/pci/controller/cadence/pci-j721e.c
> 
> Applied to pci/cadence for v5.9, thanks !

Thank you Lorenzo!

Regards
Kishon

      reply index

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-22 11:03 Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 01/15] PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property Kishon Vijay Abraham I
2020-07-22 11:45   ` Lorenzo Pieralisi
2020-07-22 22:30   ` Rob Herring
2020-07-22 11:03 ` [PATCH v8 02/15] PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 03/15] linux/kernel.h: Add PTR_ALIGN_DOWN macro Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 04/15] PCI: cadence: Convert all r/w accessors to perform only 32-bit accesses Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 05/15] PCI: cadence: Add support to start link and verify link status Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 06/15] PCI: cadence: Allow pci_host_bridge to have custom pci_ops Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 07/15] dt-bindings: PCI: cadence: Remove "mem" from reg binding Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 08/15] PCI: cadence: Add new *ops* for CPU addr fixup Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 09/15] PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 10/15] PCI: cadence: Add MSI-X support to Endpoint driver Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 11/15] dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 12/15] dt-bindings: PCI: Add EP " Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 13/15] PCI: j721e: Add TI J721E PCIe driver Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 14/15] misc: pci_endpoint_test: Add J721E in pci_device_id table Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 15/15] MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe Kishon Vijay Abraham I
2020-07-23 10:02 ` [PATCH v8 00/15] Add PCIe support to TI's J721E SoC Lorenzo Pieralisi
2020-07-23 10:12   ` Kishon Vijay Abraham I [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bc8ec8a2-9869-c170-7497-df3b6279fe97@ti.com \
    --to=kishon@ti.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tjoseph@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-OMAP Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-omap/0 linux-omap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-omap linux-omap/ https://lore.kernel.org/linux-omap \
		linux-omap@vger.kernel.org
	public-inbox-index linux-omap

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-omap


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git