* [PATCH] omapfb: dss: Fix max fclk divider for omap36xx
@ 2020-06-30 18:26 ` Adam Ford
2020-07-03 7:17 ` Tomi Valkeinen
2020-07-10 14:23 ` Bartlomiej Zolnierkiewicz
0 siblings, 2 replies; 8+ messages in thread
From: Adam Ford @ 2020-06-30 18:26 UTC (permalink / raw)
To: linux-fbdev
Cc: Adam Ford, stable, Bartlomiej Zolnierkiewicz, Dave Airlie,
Tomi Valkeinen, Rob Clark, linux-omap, dri-devel, linux-kernel
The drm/omap driver was fixed to correct an issue where using a
divider of 32 breaks the DSS despite the TRM stating 32 is a valid
number. Through experimentation, it appears that 31 works, and
it is consistent with the value used by the drm/omap driver.
This patch fixes the divider for fbdev driver instead of the drm.
Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
Cc: <stable@vger.kernel.org> #4.9+
Signed-off-by: Adam Ford <aford173@gmail.com>
---
Linux 4.4 will need a similar patch, but it doesn't apply cleanly.
The DRM version of this same fix is:
e2c4ed148cf3 ("drm/omap: fix max fclk divider for omap36xx")
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.c b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
index 7252d22dd117..bfc5c4c5a26a 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/dss.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
@@ -833,7 +833,7 @@ static const struct dss_features omap34xx_dss_feats = {
};
static const struct dss_features omap3630_dss_feats = {
- .fck_div_max = 32,
+ .fck_div_max = 31,
.dss_fck_multiplier = 1,
.parent_clk_name = "dpll4_ck",
.dpi_select_source = &dss_dpi_select_source_omap2_omap3,
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH] omapfb: dss: Fix max fclk divider for omap36xx
2020-06-30 18:26 ` [PATCH] omapfb: dss: Fix max fclk divider for omap36xx Adam Ford
@ 2020-07-03 7:17 ` Tomi Valkeinen
2020-07-03 19:36 ` Sam Ravnborg
2020-07-10 14:23 ` Bartlomiej Zolnierkiewicz
1 sibling, 1 reply; 8+ messages in thread
From: Tomi Valkeinen @ 2020-07-03 7:17 UTC (permalink / raw)
To: Adam Ford, linux-fbdev
Cc: stable, Bartlomiej Zolnierkiewicz, Dave Airlie, Rob Clark,
linux-omap, dri-devel, linux-kernel
On 30/06/2020 21:26, Adam Ford wrote:
> The drm/omap driver was fixed to correct an issue where using a
> divider of 32 breaks the DSS despite the TRM stating 32 is a valid
> number. Through experimentation, it appears that 31 works, and
> it is consistent with the value used by the drm/omap driver.
>
> This patch fixes the divider for fbdev driver instead of the drm.
>
> Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
>
> Cc: <stable@vger.kernel.org> #4.9+
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> Linux 4.4 will need a similar patch, but it doesn't apply cleanly.
>
> The DRM version of this same fix is:
> e2c4ed148cf3 ("drm/omap: fix max fclk divider for omap36xx")
>
>
> diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.c b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> index 7252d22dd117..bfc5c4c5a26a 100644
> --- a/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> +++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> @@ -833,7 +833,7 @@ static const struct dss_features omap34xx_dss_feats = {
> };
>
> static const struct dss_features omap3630_dss_feats = {
> - .fck_div_max = 32,
> + .fck_div_max = 31,
> .dss_fck_multiplier = 1,
> .parent_clk_name = "dpll4_ck",
> .dpi_select_source = &dss_dpi_select_source_omap2_omap3,
>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] omapfb: dss: Fix max fclk divider for omap36xx
2020-07-03 7:17 ` Tomi Valkeinen
@ 2020-07-03 19:36 ` Sam Ravnborg
2020-07-06 6:02 ` Tomi Valkeinen
0 siblings, 1 reply; 8+ messages in thread
From: Sam Ravnborg @ 2020-07-03 19:36 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: Adam Ford, linux-fbdev, Bartlomiej Zolnierkiewicz, linux-kernel,
dri-devel, stable, linux-omap
Hi Tomi.
On Fri, Jul 03, 2020 at 10:17:29AM +0300, Tomi Valkeinen wrote:
> On 30/06/2020 21:26, Adam Ford wrote:
> > The drm/omap driver was fixed to correct an issue where using a
> > divider of 32 breaks the DSS despite the TRM stating 32 is a valid
> > number. Through experimentation, it appears that 31 works, and
> > it is consistent with the value used by the drm/omap driver.
> >
> > This patch fixes the divider for fbdev driver instead of the drm.
> >
> > Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
> >
> > Cc: <stable@vger.kernel.org> #4.9+
> > Signed-off-by: Adam Ford <aford173@gmail.com>
> > ---
> > Linux 4.4 will need a similar patch, but it doesn't apply cleanly.
> >
> > The DRM version of this same fix is:
> > e2c4ed148cf3 ("drm/omap: fix max fclk divider for omap36xx")
> >
> >
> > diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.c b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> > index 7252d22dd117..bfc5c4c5a26a 100644
> > --- a/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> > +++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> > @@ -833,7 +833,7 @@ static const struct dss_features omap34xx_dss_feats = {
> > };
> > static const struct dss_features omap3630_dss_feats = {
> > - .fck_div_max = 32,
> > + .fck_div_max = 31,
> > .dss_fck_multiplier = 1,
> > .parent_clk_name = "dpll4_ck",
> > .dpi_select_source = &dss_dpi_select_source_omap2_omap3,
> >
>
> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Will you apply to drm-misc?
Note following output from "dim fixes":
$ dim fixes f76ee892a99e
Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: <stable@vger.kernel.org> # v4.5+
Here it says the fix is valid from v4.5 onwards.
Sam
>
> Tomi
>
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] omapfb: dss: Fix max fclk divider for omap36xx
2020-07-03 19:36 ` Sam Ravnborg
@ 2020-07-06 6:02 ` Tomi Valkeinen
2020-07-06 11:18 ` Adam Ford
0 siblings, 1 reply; 8+ messages in thread
From: Tomi Valkeinen @ 2020-07-06 6:02 UTC (permalink / raw)
To: Sam Ravnborg, Bartlomiej Zolnierkiewicz
Cc: Adam Ford, linux-fbdev, linux-kernel, dri-devel, stable, linux-omap
Hi,
On 03/07/2020 22:36, Sam Ravnborg wrote:
> Hi Tomi.
>
> On Fri, Jul 03, 2020 at 10:17:29AM +0300, Tomi Valkeinen wrote:
>> On 30/06/2020 21:26, Adam Ford wrote:
>>> The drm/omap driver was fixed to correct an issue where using a
>>> divider of 32 breaks the DSS despite the TRM stating 32 is a valid
>>> number. Through experimentation, it appears that 31 works, and
>>> it is consistent with the value used by the drm/omap driver.
>>>
>>> This patch fixes the divider for fbdev driver instead of the drm.
>>>
>>> Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
>>>
>>> Cc: <stable@vger.kernel.org> #4.9+
>>> Signed-off-by: Adam Ford <aford173@gmail.com>
>>> ---
>>> Linux 4.4 will need a similar patch, but it doesn't apply cleanly.
>>>
>>> The DRM version of this same fix is:
>>> e2c4ed148cf3 ("drm/omap: fix max fclk divider for omap36xx")
>>>
>>>
>>> diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.c b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
>>> index 7252d22dd117..bfc5c4c5a26a 100644
>>> --- a/drivers/video/fbdev/omap2/omapfb/dss/dss.c
>>> +++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
>>> @@ -833,7 +833,7 @@ static const struct dss_features omap34xx_dss_feats = {
>>> };
>>> static const struct dss_features omap3630_dss_feats = {
>>> - .fck_div_max = 32,
>>> + .fck_div_max = 31,
>>> .dss_fck_multiplier = 1,
>>> .parent_clk_name = "dpll4_ck",
>>> .dpi_select_source = &dss_dpi_select_source_omap2_omap3,
>>>
>>
>> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Will you apply to drm-misc?
This is for fbdev, so I presume Bartlomiej will pick this one.
> Note following output from "dim fixes":
> $ dim fixes f76ee892a99e
> Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: Dave Airlie <airlied@gmail.com>
> Cc: Rob Clark <robdclark@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> Cc: Jason Yan <yanaijie@huawei.com>
> Cc: "Andrew F. Davis" <afd@ti.com>
> Cc: YueHaibing <yuehaibing@huawei.com>
> Cc: <stable@vger.kernel.org> # v4.5+
>
> Here it says the fix is valid from v4.5 onwards.
Hmm... Adam, you marked the fix to apply to v4.9+, and then you said
v4.4 needs a new patch (that's before the big copy/rename). Did you
check the versions between 4.4 and 4.9? I would guess this one applies
to v4.5+.
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] omapfb: dss: Fix max fclk divider for omap36xx
2020-07-06 6:02 ` Tomi Valkeinen
@ 2020-07-06 11:18 ` Adam Ford
2020-07-08 23:37 ` Adam Ford
0 siblings, 1 reply; 8+ messages in thread
From: Adam Ford @ 2020-07-06 11:18 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: Sam Ravnborg, Bartlomiej Zolnierkiewicz, linux-fbdev,
Linux Kernel Mailing List, dri-devel, stable, Linux-OMAP
On Mon, Jul 6, 2020 at 1:02 AM Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
>
> Hi,
>
> On 03/07/2020 22:36, Sam Ravnborg wrote:
> > Hi Tomi.
> >
> > On Fri, Jul 03, 2020 at 10:17:29AM +0300, Tomi Valkeinen wrote:
> >> On 30/06/2020 21:26, Adam Ford wrote:
> >>> The drm/omap driver was fixed to correct an issue where using a
> >>> divider of 32 breaks the DSS despite the TRM stating 32 is a valid
> >>> number. Through experimentation, it appears that 31 works, and
> >>> it is consistent with the value used by the drm/omap driver.
> >>>
> >>> This patch fixes the divider for fbdev driver instead of the drm.
> >>>
> >>> Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
> >>>
> >>> Cc: <stable@vger.kernel.org> #4.9+
> >>> Signed-off-by: Adam Ford <aford173@gmail.com>
> >>> ---
> >>> Linux 4.4 will need a similar patch, but it doesn't apply cleanly.
> >>>
> >>> The DRM version of this same fix is:
> >>> e2c4ed148cf3 ("drm/omap: fix max fclk divider for omap36xx")
> >>>
> >>>
> >>> diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.c b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> >>> index 7252d22dd117..bfc5c4c5a26a 100644
> >>> --- a/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> >>> +++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> >>> @@ -833,7 +833,7 @@ static const struct dss_features omap34xx_dss_feats = {
> >>> };
> >>> static const struct dss_features omap3630_dss_feats = {
> >>> - .fck_div_max = 32,
> >>> + .fck_div_max = 31,
> >>> .dss_fck_multiplier = 1,
> >>> .parent_clk_name = "dpll4_ck",
> >>> .dpi_select_source = &dss_dpi_select_source_omap2_omap3,
> >>>
> >>
> >> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > Will you apply to drm-misc?
>
> This is for fbdev, so I presume Bartlomiej will pick this one.
>
> > Note following output from "dim fixes":
> > $ dim fixes f76ee892a99e
> > Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
> > Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > Cc: Dave Airlie <airlied@gmail.com>
> > Cc: Rob Clark <robdclark@gmail.com>
> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > Cc: Sam Ravnborg <sam@ravnborg.org>
> > Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> > Cc: Jason Yan <yanaijie@huawei.com>
> > Cc: "Andrew F. Davis" <afd@ti.com>
> > Cc: YueHaibing <yuehaibing@huawei.com>
> > Cc: <stable@vger.kernel.org> # v4.5+
> >
> > Here it says the fix is valid from v4.5 onwards.
>
> Hmm... Adam, you marked the fix to apply to v4.9+, and then you said
> v4.4 needs a new patch (that's before the big copy/rename). Did you
> check the versions between 4.4 and 4.9? I would guess this one applies
> to v4.5+.
I only tried 4.9 because it's listed as an LTS kernel. The stuff
between 4.4 and 4.9 were EOL, so I didn't go back further. The 4.5+
is probably more accurate. I would like to do the same thing for the
4.4 kernel, but I am not sure the proper way to do that.
adam
>
> Tomi
>
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] omapfb: dss: Fix max fclk divider for omap36xx
2020-07-06 11:18 ` Adam Ford
@ 2020-07-08 23:37 ` Adam Ford
2020-07-09 6:10 ` Greg KH
0 siblings, 1 reply; 8+ messages in thread
From: Adam Ford @ 2020-07-08 23:37 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: Sam Ravnborg, Bartlomiej Zolnierkiewicz, linux-fbdev,
Linux Kernel Mailing List, dri-devel, stable, Linux-OMAP
On Mon, Jul 6, 2020 at 6:18 AM Adam Ford <aford173@gmail.com> wrote:
>
> On Mon, Jul 6, 2020 at 1:02 AM Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
> >
> > Hi,
> >
> > On 03/07/2020 22:36, Sam Ravnborg wrote:
> > > Hi Tomi.
> > >
> > > On Fri, Jul 03, 2020 at 10:17:29AM +0300, Tomi Valkeinen wrote:
> > >> On 30/06/2020 21:26, Adam Ford wrote:
> > >>> The drm/omap driver was fixed to correct an issue where using a
> > >>> divider of 32 breaks the DSS despite the TRM stating 32 is a valid
> > >>> number. Through experimentation, it appears that 31 works, and
> > >>> it is consistent with the value used by the drm/omap driver.
> > >>>
> > >>> This patch fixes the divider for fbdev driver instead of the drm.
> > >>>
> > >>> Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
> > >>>
> > >>> Cc: <stable@vger.kernel.org> #4.9+
> > >>> Signed-off-by: Adam Ford <aford173@gmail.com>
> > >>> ---
> > >>> Linux 4.4 will need a similar patch, but it doesn't apply cleanly.
> > >>>
> > >>> The DRM version of this same fix is:
> > >>> e2c4ed148cf3 ("drm/omap: fix max fclk divider for omap36xx")
> > >>>
> > >>>
> > >>> diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.c b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> > >>> index 7252d22dd117..bfc5c4c5a26a 100644
> > >>> --- a/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> > >>> +++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> > >>> @@ -833,7 +833,7 @@ static const struct dss_features omap34xx_dss_feats = {
> > >>> };
> > >>> static const struct dss_features omap3630_dss_feats = {
> > >>> - .fck_div_max = 32,
> > >>> + .fck_div_max = 31,
> > >>> .dss_fck_multiplier = 1,
> > >>> .parent_clk_name = "dpll4_ck",
> > >>> .dpi_select_source = &dss_dpi_select_source_omap2_omap3,
> > >>>
> > >>
> > >> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > > Will you apply to drm-misc?
> >
> > This is for fbdev, so I presume Bartlomiej will pick this one.
> >
> > > Note following output from "dim fixes":
> > > $ dim fixes f76ee892a99e
> > > Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
> > > Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > > Cc: Dave Airlie <airlied@gmail.com>
> > > Cc: Rob Clark <robdclark@gmail.com>
> > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > > Cc: Sam Ravnborg <sam@ravnborg.org>
> > > Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> > > Cc: Jason Yan <yanaijie@huawei.com>
> > > Cc: "Andrew F. Davis" <afd@ti.com>
> > > Cc: YueHaibing <yuehaibing@huawei.com>
> > > Cc: <stable@vger.kernel.org> # v4.5+
> > >
> > > Here it says the fix is valid from v4.5 onwards.
> >
> > Hmm... Adam, you marked the fix to apply to v4.9+, and then you said
> > v4.4 needs a new patch (that's before the big copy/rename). Did you
> > check the versions between 4.4 and 4.9? I would guess this one applies
> > to v4.5+.
>
> I only tried 4.9 because it's listed as an LTS kernel. The stuff
> between 4.4 and 4.9 were EOL, so I didn't go back further. The 4.5+
> is probably more accurate. I would like to do the same thing for the
> 4.4 kernel, but I am not sure the proper way to do that.
What is the correct protocol for patching 4.4? I'd like to do that,
but the patch would be unique to the 4.4. Should I just submit the
patch directly to stable and cc Tomi?
adam
>
> adam
> >
> > Tomi
> >
> > --
> > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> > Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] omapfb: dss: Fix max fclk divider for omap36xx
2020-07-08 23:37 ` Adam Ford
@ 2020-07-09 6:10 ` Greg KH
0 siblings, 0 replies; 8+ messages in thread
From: Greg KH @ 2020-07-09 6:10 UTC (permalink / raw)
To: Adam Ford
Cc: Tomi Valkeinen, Sam Ravnborg, Bartlomiej Zolnierkiewicz,
linux-fbdev, Linux Kernel Mailing List, dri-devel, stable,
Linux-OMAP
On Wed, Jul 08, 2020 at 06:37:51PM -0500, Adam Ford wrote:
> On Mon, Jul 6, 2020 at 6:18 AM Adam Ford <aford173@gmail.com> wrote:
> >
> > On Mon, Jul 6, 2020 at 1:02 AM Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
> > >
> > > Hi,
> > >
> > > On 03/07/2020 22:36, Sam Ravnborg wrote:
> > > > Hi Tomi.
> > > >
> > > > On Fri, Jul 03, 2020 at 10:17:29AM +0300, Tomi Valkeinen wrote:
> > > >> On 30/06/2020 21:26, Adam Ford wrote:
> > > >>> The drm/omap driver was fixed to correct an issue where using a
> > > >>> divider of 32 breaks the DSS despite the TRM stating 32 is a valid
> > > >>> number. Through experimentation, it appears that 31 works, and
> > > >>> it is consistent with the value used by the drm/omap driver.
> > > >>>
> > > >>> This patch fixes the divider for fbdev driver instead of the drm.
> > > >>>
> > > >>> Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
> > > >>>
> > > >>> Cc: <stable@vger.kernel.org> #4.9+
> > > >>> Signed-off-by: Adam Ford <aford173@gmail.com>
> > > >>> ---
> > > >>> Linux 4.4 will need a similar patch, but it doesn't apply cleanly.
> > > >>>
> > > >>> The DRM version of this same fix is:
> > > >>> e2c4ed148cf3 ("drm/omap: fix max fclk divider for omap36xx")
> > > >>>
> > > >>>
> > > >>> diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.c b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> > > >>> index 7252d22dd117..bfc5c4c5a26a 100644
> > > >>> --- a/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> > > >>> +++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> > > >>> @@ -833,7 +833,7 @@ static const struct dss_features omap34xx_dss_feats = {
> > > >>> };
> > > >>> static const struct dss_features omap3630_dss_feats = {
> > > >>> - .fck_div_max = 32,
> > > >>> + .fck_div_max = 31,
> > > >>> .dss_fck_multiplier = 1,
> > > >>> .parent_clk_name = "dpll4_ck",
> > > >>> .dpi_select_source = &dss_dpi_select_source_omap2_omap3,
> > > >>>
> > > >>
> > > >> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > > > Will you apply to drm-misc?
> > >
> > > This is for fbdev, so I presume Bartlomiej will pick this one.
> > >
> > > > Note following output from "dim fixes":
> > > > $ dim fixes f76ee892a99e
> > > > Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
> > > > Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > > > Cc: Dave Airlie <airlied@gmail.com>
> > > > Cc: Rob Clark <robdclark@gmail.com>
> > > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > > > Cc: Sam Ravnborg <sam@ravnborg.org>
> > > > Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> > > > Cc: Jason Yan <yanaijie@huawei.com>
> > > > Cc: "Andrew F. Davis" <afd@ti.com>
> > > > Cc: YueHaibing <yuehaibing@huawei.com>
> > > > Cc: <stable@vger.kernel.org> # v4.5+
> > > >
> > > > Here it says the fix is valid from v4.5 onwards.
> > >
> > > Hmm... Adam, you marked the fix to apply to v4.9+, and then you said
> > > v4.4 needs a new patch (that's before the big copy/rename). Did you
> > > check the versions between 4.4 and 4.9? I would guess this one applies
> > > to v4.5+.
> >
> > I only tried 4.9 because it's listed as an LTS kernel. The stuff
> > between 4.4 and 4.9 were EOL, so I didn't go back further. The 4.5+
> > is probably more accurate. I would like to do the same thing for the
> > 4.4 kernel, but I am not sure the proper way to do that.
>
> What is the correct protocol for patching 4.4? I'd like to do that,
> but the patch would be unique to the 4.4. Should I just submit the
> patch directly to stable and cc Tomi?
Yes, and document the heck out of why this is a 4.4-only patch, and why
we can't take whatever happened in newer kernels instead.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] omapfb: dss: Fix max fclk divider for omap36xx
2020-06-30 18:26 ` [PATCH] omapfb: dss: Fix max fclk divider for omap36xx Adam Ford
2020-07-03 7:17 ` Tomi Valkeinen
@ 2020-07-10 14:23 ` Bartlomiej Zolnierkiewicz
1 sibling, 0 replies; 8+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2020-07-10 14:23 UTC (permalink / raw)
To: Adam Ford
Cc: linux-fbdev, stable, Dave Airlie, Tomi Valkeinen, Rob Clark,
linux-omap, dri-devel, linux-kernel
On 6/30/20 8:26 PM, Adam Ford wrote:
> The drm/omap driver was fixed to correct an issue where using a
> divider of 32 breaks the DSS despite the TRM stating 32 is a valid
> number. Through experimentation, it appears that 31 works, and
> it is consistent with the value used by the drm/omap driver.
>
> This patch fixes the divider for fbdev driver instead of the drm.
>
> Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
>
> Cc: <stable@vger.kernel.org> #4.9+
> Signed-off-by: Adam Ford <aford173@gmail.com>
Applied to drm-misc-next tree, thanks.
(I marked patch as applicable to stable 4.5+ while merging)
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> ---
> Linux 4.4 will need a similar patch, but it doesn't apply cleanly.
>
> The DRM version of this same fix is:
> e2c4ed148cf3 ("drm/omap: fix max fclk divider for omap36xx")
>
>
> diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.c b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> index 7252d22dd117..bfc5c4c5a26a 100644
> --- a/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> +++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> @@ -833,7 +833,7 @@ static const struct dss_features omap34xx_dss_feats = {
> };
>
> static const struct dss_features omap3630_dss_feats = {
> - .fck_div_max = 32,
> + .fck_div_max = 31,
> .dss_fck_multiplier = 1,
> .parent_clk_name = "dpll4_ck",
> .dpi_select_source = &dss_dpi_select_source_omap2_omap3,
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-07-10 14:24 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20200630182652eucas1p1ce5e07b065127e32ab734f4447c2f735@eucas1p1.samsung.com>
2020-06-30 18:26 ` [PATCH] omapfb: dss: Fix max fclk divider for omap36xx Adam Ford
2020-07-03 7:17 ` Tomi Valkeinen
2020-07-03 19:36 ` Sam Ravnborg
2020-07-06 6:02 ` Tomi Valkeinen
2020-07-06 11:18 ` Adam Ford
2020-07-08 23:37 ` Adam Ford
2020-07-09 6:10 ` Greg KH
2020-07-10 14:23 ` Bartlomiej Zolnierkiewicz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).