* omap-mcbsp 49022000.mcbsp: TX Buffer Overflow!
@ 2020-07-11 3:33 Dave Young
2020-07-14 18:03 ` Jarkko Nikula
0 siblings, 1 reply; 5+ messages in thread
From: Dave Young @ 2020-07-11 3:33 UTC (permalink / raw)
To: Peter Ujfalusi, Jarkko Nikula, alsa-devel, linux-omap
Hi,
I'm trying to use g_audio on my Nokia N900 with mainline kernel. Seems
it does not work. No sound when I play from a laptop, and also see a
lot of error like below:
[ 4729.557647] omap-mcbsp 49022000.mcbsp: TX Buffer Overflow!
...
Is this a know issue?
Thanks
Dave
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: omap-mcbsp 49022000.mcbsp: TX Buffer Overflow!
2020-07-11 3:33 omap-mcbsp 49022000.mcbsp: TX Buffer Overflow! Dave Young
@ 2020-07-14 18:03 ` Jarkko Nikula
2020-07-20 9:03 ` Peter Ujfalusi
0 siblings, 1 reply; 5+ messages in thread
From: Jarkko Nikula @ 2020-07-14 18:03 UTC (permalink / raw)
To: Dave Young, Peter Ujfalusi, alsa-devel, linux-omap
[-- Attachment #1: Type: text/plain, Size: 1042 bytes --]
Hi
On 7/11/20 6:33 AM, Dave Young wrote:
> Hi,
>
> I'm trying to use g_audio on my Nokia N900 with mainline kernel. Seems
> it does not work. No sound when I play from a laptop, and also see a
> lot of error like below:
> [ 4729.557647] omap-mcbsp 49022000.mcbsp: TX Buffer Overflow!
> ...
>
Head 0dc589da873b ("Merge tag 'iommu-fixes-v5.8-rc5' of
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu") records and
plays fine here (arecord -f dat |aplay), although I see some of those
errors but don't hear any glitches etc.
Peter, does above indicate a serious issue or is it perhaps a false
alarm on OMAP3 (no audible glitches)?
I believe you don't have some mixer knob on, N900 audio path is somewhat
complex and needs bunch of mixer switches and volumes to be set. I
attached my N900 mixer scripts for you to try.
Set first everything off:
./aic34_scripts/shutdown.sh
Then enable internal digital microphone and speakers:
./aic34_scripts/dmic.sh
./aic34_scripts/speakers.sh
Hopefully these help you get going :-)
--
Jarkko
[-- Attachment #2: aic34_scripts.tar.bz2 --]
[-- Type: application/octet-stream, Size: 1729 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: omap-mcbsp 49022000.mcbsp: TX Buffer Overflow!
2020-07-14 18:03 ` Jarkko Nikula
@ 2020-07-20 9:03 ` Peter Ujfalusi
2020-07-20 9:32 ` Peter Ujfalusi
0 siblings, 1 reply; 5+ messages in thread
From: Peter Ujfalusi @ 2020-07-20 9:03 UTC (permalink / raw)
To: Jarkko Nikula, Dave Young, alsa-devel, linux-omap
Hi,
On 14/07/2020 21.03, Jarkko Nikula wrote:
> Hi
>
> On 7/11/20 6:33 AM, Dave Young wrote:
>> Hi,
>>
>> I'm trying to use g_audio on my Nokia N900 with mainline kernel. Seems
>> it does not work. No sound when I play from a laptop, and also see a
>> lot of error like below:
>> [ 4729.557647] omap-mcbsp 49022000.mcbsp: TX Buffer Overflow!
>> ...
>>
> Head 0dc589da873b ("Merge tag 'iommu-fixes-v5.8-rc5' of
> git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu") records and
> plays fine here (arecord -f dat |aplay), although I see some of those
> errors but don't hear any glitches etc.
>
> Peter, does above indicate a serious issue or is it perhaps a false
> alarm on OMAP3 (no audible glitches)?
I need to dig out my n900 or beagleXM, but it is hard to believe it is
not a result of a glitch.
The DMA is triggered by McBSP and it should write exactly what McBSP
expects to be receiving.
I can not recall any changes in the past years which would have
introduced regressions in McBSP or the sDMA driver.
> I believe you don't have some mixer knob on, N900 audio path is somewhat
> complex and needs bunch of mixer switches and volumes to be set. I
> attached my N900 mixer scripts for you to try.
This could be the reason for the silence, I have asoundrc files
somewhere to restore a 'good' mixer config.
> Set first everything off:
> ./aic34_scripts/shutdown.sh
>
> Then enable internal digital microphone and speakers:
> ./aic34_scripts/dmic.sh
> ./aic34_scripts/speakers.sh
>
> Hopefully these help you get going :-)
>
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: omap-mcbsp 49022000.mcbsp: TX Buffer Overflow!
2020-07-20 9:03 ` Peter Ujfalusi
@ 2020-07-20 9:32 ` Peter Ujfalusi
2020-07-21 3:18 ` Dave Young
0 siblings, 1 reply; 5+ messages in thread
From: Peter Ujfalusi @ 2020-07-20 9:32 UTC (permalink / raw)
To: Jarkko Nikula, Dave Young, alsa-devel, linux-omap
Hi,
On 20/07/2020 12.03, Peter Ujfalusi wrote:
> Hi,
>
> On 14/07/2020 21.03, Jarkko Nikula wrote:
>> Hi
>>
>> On 7/11/20 6:33 AM, Dave Young wrote:
>>> Hi,
>>>
>>> I'm trying to use g_audio on my Nokia N900 with mainline kernel. Seems
>>> it does not work. No sound when I play from a laptop, and also see a
>>> lot of error like below:
>>> [ 4729.557647] omap-mcbsp 49022000.mcbsp: TX Buffer Overflow!
>>> ...
>>>
>> Head 0dc589da873b ("Merge tag 'iommu-fixes-v5.8-rc5' of
>> git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu") records and
>> plays fine here (arecord -f dat |aplay), although I see some of those
>> errors but don't hear any glitches etc.
>>
>> Peter, does above indicate a serious issue or is it perhaps a false
>> alarm on OMAP3 (no audible glitches)?
>
> I need to dig out my n900 or beagleXM, but it is hard to believe it is
> not a result of a glitch.
> The DMA is triggered by McBSP and it should write exactly what McBSP
> expects to be receiving.
>
> I can not recall any changes in the past years which would have
> introduced regressions in McBSP or the sDMA driver.
I have booted linux-next on my BeagleXM (OMAP3630, McBSP2 <-> twl4030)
and I don't see the TX overflow print.
I have checked element and threshold modes and it looks fine.
I'm not sure why we have TX Overflow printed on n900.
>> I believe you don't have some mixer knob on, N900 audio path is somewhat
>> complex and needs bunch of mixer switches and volumes to be set. I
>> attached my N900 mixer scripts for you to try.
>
> This could be the reason for the silence, I have asoundrc files
> somewhere to restore a 'good' mixer config.
>
>> Set first everything off:
>> ./aic34_scripts/shutdown.sh
>>
>> Then enable internal digital microphone and speakers:
>> ./aic34_scripts/dmic.sh
>> ./aic34_scripts/speakers.sh
>>
>> Hopefully these help you get going :-)
>>
>
> - Péter
>
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: omap-mcbsp 49022000.mcbsp: TX Buffer Overflow!
2020-07-20 9:32 ` Peter Ujfalusi
@ 2020-07-21 3:18 ` Dave Young
0 siblings, 0 replies; 5+ messages in thread
From: Dave Young @ 2020-07-21 3:18 UTC (permalink / raw)
To: Peter Ujfalusi; +Cc: Jarkko Nikula, alsa-devel, linux-omap
Hi Peter
On 07/20/20 at 12:32pm, Peter Ujfalusi wrote:
> Hi,
>
> On 20/07/2020 12.03, Peter Ujfalusi wrote:
> > Hi,
> >
> > On 14/07/2020 21.03, Jarkko Nikula wrote:
> >> Hi
> >>
> >> On 7/11/20 6:33 AM, Dave Young wrote:
> >>> Hi,
> >>>
> >>> I'm trying to use g_audio on my Nokia N900 with mainline kernel. Seems
> >>> it does not work. No sound when I play from a laptop, and also see a
> >>> lot of error like below:
> >>> [ 4729.557647] omap-mcbsp 49022000.mcbsp: TX Buffer Overflow!
> >>> ...
> >>>
> >> Head 0dc589da873b ("Merge tag 'iommu-fixes-v5.8-rc5' of
> >> git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu") records and
> >> plays fine here (arecord -f dat |aplay), although I see some of those
> >> errors but don't hear any glitches etc.
> >>
> >> Peter, does above indicate a serious issue or is it perhaps a false
> >> alarm on OMAP3 (no audible glitches)?
> >
> > I need to dig out my n900 or beagleXM, but it is hard to believe it is
> > not a result of a glitch.
> > The DMA is triggered by McBSP and it should write exactly what McBSP
> > expects to be receiving.
> >
> > I can not recall any changes in the past years which would have
> > introduced regressions in McBSP or the sDMA driver.
>
> I have booted linux-next on my BeagleXM (OMAP3630, McBSP2 <-> twl4030)
> and I don't see the TX overflow print.
Just to clarify, the sound works well on n900 for normal use cases.
The TX overflow only happens when I use it as an usb audio gadget.
Because n900 is old, I tried to use it as an external audio device.
>
> I have checked element and threshold modes and it looks fine.
> I'm not sure why we have TX Overflow printed on n900.
>
> >> I believe you don't have some mixer knob on, N900 audio path is somewhat
> >> complex and needs bunch of mixer switches and volumes to be set. I
> >> attached my N900 mixer scripts for you to try.
> >
> > This could be the reason for the silence, I have asoundrc files
> > somewhere to restore a 'good' mixer config.
> >
> >> Set first everything off:
> >> ./aic34_scripts/shutdown.sh
> >>
> >> Then enable internal digital microphone and speakers:
> >> ./aic34_scripts/dmic.sh
> >> ./aic34_scripts/speakers.sh
> >>
> >> Hopefully these help you get going :-)
> >>
> >
> > - Péter
> >
> > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> > Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> >
>
> - Péter
>
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
Thanks
Dave
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-07-21 3:18 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-11 3:33 omap-mcbsp 49022000.mcbsp: TX Buffer Overflow! Dave Young
2020-07-14 18:03 ` Jarkko Nikula
2020-07-20 9:03 ` Peter Ujfalusi
2020-07-20 9:32 ` Peter Ujfalusi
2020-07-21 3:18 ` Dave Young
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).