linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: "Rob Herring" <robh+dt@kernel.org>,
	"Laurent Pinchart" <laurent.pinchart+renesas@ideasonboard.com>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
	"Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	"Jan Tuerk" <jan.tuerk@emtrion.com>,
	"Shawn Guo" <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 1/3] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
Date: Fri, 21 May 2021 09:54:06 +0200	[thread overview]
Message-ID: <e8350ea542c92465020f03481d76943168df2935.1621583562.git.geert+renesas@glider.be> (raw)
In-Reply-To: <cover.1621583562.git.geert+renesas@glider.be>

The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
'hog' suffix.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/dra7-evm.dts          | 2 +-
 arch/arm/boot/dts/dra71-evm.dts         | 2 +-
 arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +-
 arch/arm/boot/dts/dra76-evm.dts         | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 38530dbb89a00b7c..3dcb6e1f49bcf1f0 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -366,7 +366,7 @@ pcf_hdmi: gpio@26 {
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 6d2cca6b44883e59..a64364443031525b 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -187,7 +187,7 @@ &pcf_gpio_21 {
 };
 
 &pcf_hdmi {
-	p0 {
+	hdmi-i2c-disable-hog {
 		/*
 		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
 		 * With this PM_SEL(p3) should not matter
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index b65b2dd094d0ff57..f2384277d5dcdc5c 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -268,7 +268,7 @@ pcf_hdmi: pcf8575@26 {
 		 */
 		lines-initial-states = <0x0f2b>;
 
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 9bd01ae40b1d1fbb..df47ea59c9c404c2 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -381,7 +381,7 @@ pcf_hdmi: pcf8575@26 {
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
-- 
2.25.1


  reply	other threads:[~2021-05-21  7:54 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21  7:54 [PATCH 0/3] pcf857x: DTS fixes and DT binding to json-schema conversion Geert Uytterhoeven
2021-05-21  7:54 ` Geert Uytterhoeven [this message]
2021-05-23  1:54   ` [PATCH 1/3] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema Laurent Pinchart
2021-05-27 12:02   ` Tony Lindgren
2021-05-21  7:54 ` [PATCH 2/3] ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells Geert Uytterhoeven
2021-05-23  1:55   ` Laurent Pinchart
2021-05-23  5:42   ` Shawn Guo
2021-05-21  7:54 ` [PATCH 3/3] dt-bindings: gpio: pcf857x: Convert to json-schema Geert Uytterhoeven
2021-05-21 10:04   ` Linus Walleij
2021-05-21 10:23     ` Geert Uytterhoeven
2021-05-21 18:24       ` Rob Herring
2021-05-27 15:04         ` Geert Uytterhoeven
2021-05-23  1:52   ` Laurent Pinchart
2021-05-27 14:43     ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e8350ea542c92465020f03481d76943168df2935.1621583562.git.geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=bcousson@baylibre.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jan.tuerk@emtrion.com \
    --cc=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).