Linux-OMAP Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/2] AMR: DTS: fix and extension for Pandaboard ES
@ 2020-10-03 14:09 H. Nikolaus Schaller
  2020-10-03 14:10 ` [PATCH 1/2] ARM: dts: pandaboard: fix pinmux for gpio user button of " H. Nikolaus Schaller
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: H. Nikolaus Schaller @ 2020-10-03 14:09 UTC (permalink / raw)
  To: Benoît Cousson, Tony Lindgren, Rob Herring
  Cc: linux-omap, devicetree, linux-kernel, letux-kernel, kernel,
	H. Nikolaus Schaller

* fix wrong pinmux offset preventing the user button from working
* add uart connection for bluetooth wl1271 hci

H. Nikolaus Schaller (2):
  ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ES
  ARM: dts: pandaboard es: add bluetooth uart for HCI

 arch/arm/boot/dts/omap4-panda-es.dts | 34 +++++++++++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)

-- 
2.26.2


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 1/2] ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ES
  2020-10-03 14:09 [PATCH 0/2] AMR: DTS: fix and extension for Pandaboard ES H. Nikolaus Schaller
@ 2020-10-03 14:10 ` H. Nikolaus Schaller
  2020-10-03 14:10 ` [PATCH 2/2] ARM: dts: pandaboard es: add bluetooth uart for HCI H. Nikolaus Schaller
  2020-10-30  9:09 ` [PATCH 0/2] AMR: DTS: fix and extension for Pandaboard ES H. Nikolaus Schaller
  2 siblings, 0 replies; 4+ messages in thread
From: H. Nikolaus Schaller @ 2020-10-03 14:10 UTC (permalink / raw)
  To: Benoît Cousson, Tony Lindgren, Rob Herring
  Cc: linux-omap, devicetree, linux-kernel, letux-kernel, kernel,
	H. Nikolaus Schaller, stable

The pinmux control register offset passed to OMAP4_IOPAD is odd.

Fixes: ab9a13665e7c ("ARM: dts: pandaboard: add gpio user button")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 arch/arm/boot/dts/omap4-panda-es.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index cfa85aa3da085e..6afa8fd7c412de 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -46,7 +46,7 @@ OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
 
 	button_pins: pinmux_button_pins {
 		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
+			OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
 		>;
 	};
 };
-- 
2.26.2


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 2/2] ARM: dts: pandaboard es: add bluetooth uart for HCI
  2020-10-03 14:09 [PATCH 0/2] AMR: DTS: fix and extension for Pandaboard ES H. Nikolaus Schaller
  2020-10-03 14:10 ` [PATCH 1/2] ARM: dts: pandaboard: fix pinmux for gpio user button of " H. Nikolaus Schaller
@ 2020-10-03 14:10 ` H. Nikolaus Schaller
  2020-10-30  9:09 ` [PATCH 0/2] AMR: DTS: fix and extension for Pandaboard ES H. Nikolaus Schaller
  2 siblings, 0 replies; 4+ messages in thread
From: H. Nikolaus Schaller @ 2020-10-03 14:10 UTC (permalink / raw)
  To: Benoît Cousson, Tony Lindgren, Rob Herring
  Cc: linux-omap, devicetree, linux-kernel, letux-kernel, kernel,
	H. Nikolaus Schaller

The wl271 bluetooth uart is connected to uart2.
Setup a serdev uart child and separate bluetooth and uart2 pinmux
from wl12xx pinmux to better group the pins and muxes.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 arch/arm/boot/dts/omap4-panda-es.dts | 32 ++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 6afa8fd7c412de..7c6886cd738f03 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -49,6 +49,22 @@ button_pins: pinmux_button_pins {
 			OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
 		>;
 	};
+
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 - BTEN */
+			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 - BTWAKEUP */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts - HCI */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
 };
 
 &led_wkgpio_pins {
@@ -80,3 +96,19 @@ buttonS2 {
 &gpio1_target {
 	 ti,no-reset-on-init;
 };
+
+&wl12xx_gpio {
+	pinctrl-single,pins = <
+		OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+		OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+	>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins &bt_pins>;
+	bluetooth: tiwi {
+		compatible = "ti,wl1271-st";
+		enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;	/* GPIO_46 */
+	};
+};
-- 
2.26.2


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH 0/2] AMR: DTS: fix and extension for Pandaboard ES
  2020-10-03 14:09 [PATCH 0/2] AMR: DTS: fix and extension for Pandaboard ES H. Nikolaus Schaller
  2020-10-03 14:10 ` [PATCH 1/2] ARM: dts: pandaboard: fix pinmux for gpio user button of " H. Nikolaus Schaller
  2020-10-03 14:10 ` [PATCH 2/2] ARM: dts: pandaboard es: add bluetooth uart for HCI H. Nikolaus Schaller
@ 2020-10-30  9:09 ` H. Nikolaus Schaller
  2 siblings, 0 replies; 4+ messages in thread
From: H. Nikolaus Schaller @ 2020-10-30  9:09 UTC (permalink / raw)
  To: Benoît Cousson, Tony Lindgren, Rob Herring
  Cc: linux-omap, devicetree, linux-kernel, letux-kernel, kernel

ping

> Am 03.10.2020 um 16:09 schrieb H. Nikolaus Schaller <hns@goldelico.com>:
> 
> * fix wrong pinmux offset preventing the user button from working
> * add uart connection for bluetooth wl1271 hci
> 
> H. Nikolaus Schaller (2):
>  ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ES
>  ARM: dts: pandaboard es: add bluetooth uart for HCI
> 
> arch/arm/boot/dts/omap4-panda-es.dts | 34 +++++++++++++++++++++++++++-
> 1 file changed, 33 insertions(+), 1 deletion(-)
> 
> -- 
> 2.26.2
> 


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-03 14:09 [PATCH 0/2] AMR: DTS: fix and extension for Pandaboard ES H. Nikolaus Schaller
2020-10-03 14:10 ` [PATCH 1/2] ARM: dts: pandaboard: fix pinmux for gpio user button of " H. Nikolaus Schaller
2020-10-03 14:10 ` [PATCH 2/2] ARM: dts: pandaboard es: add bluetooth uart for HCI H. Nikolaus Schaller
2020-10-30  9:09 ` [PATCH 0/2] AMR: DTS: fix and extension for Pandaboard ES H. Nikolaus Schaller

Linux-OMAP Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-omap/0 linux-omap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-omap linux-omap/ https://lore.kernel.org/linux-omap \
		linux-omap@vger.kernel.org
	public-inbox-index linux-omap

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-omap


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git