[PATCH v4 0/3] Fix pinctrl-single pcs_pin_dbg_show()

[PATCH v4 0/3] Fix pinctrl-single pcs_pin_dbg_show()

[Hanna Hawa]

These patches fix the pcs_pin_dbg_show() function for the scenario where
a single register controls multiple pins (i.e. bits_per_mux is not zero)
Additionally, the common formula is moved to a separate function to
allow reuse.

Changes since v3:
-----------------
- define and set variable 'mux_bytes' in one line
- update commit message

Changes since v2:
-----------------
- move read() register to be outside of if condition (as it common
  read()).
- Remove extra parentheses
- replace offset variable by direct return statements

Changes since v1:
-----------------
- remove unused variable in In function 'pcs_allocate_pin_table'
  (Reported-by: kernel test robot <lkp@intel.com>)

Hanna Hawa (3):
  pinctrl: pinctrl-single: remove unused variable
  pinctrl: pinctrl-single: remove unused parameter
  pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux is
    not zero

 drivers/pinctrl/pinctrl-single.c | 65 ++++++++++++++++++--------------
 1 file changed, 37 insertions(+), 28 deletions(-)

-- 
2.17.1

[PATCH v4 1/3] pinctrl: pinctrl-single: remove unused variable

[Hanna Hawa]

Remove unused parameter 'num_pins_in_register' from
pcs_allocate_pin_table().

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
---
 drivers/pinctrl/pinctrl-single.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 7771316dfffa..91c638b85d2c 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -703,14 +703,12 @@ static int pcs_add_pin(struct pcs_device *pcs, unsigned offset,
 static int pcs_allocate_pin_table(struct pcs_device *pcs)
 {
 	int mux_bytes, nr_pins, i;
-	int num_pins_in_register = 0;
 
 	mux_bytes = pcs->width / BITS_PER_BYTE;
 
 	if (pcs->bits_per_mux) {
 		pcs->bits_per_pin = fls(pcs->fmask);
 		nr_pins = (pcs->size * BITS_PER_BYTE) / pcs->bits_per_pin;
-		num_pins_in_register = pcs->width / pcs->bits_per_pin;
 	} else {
 		nr_pins = pcs->size / mux_bytes;
 	}
-- 
2.17.1

Re: [PATCH v4 1/3] pinctrl: pinctrl-single: remove unused variable

[Tony Lindgren]

* Hanna Hawa <hhhawa@amazon.com> [700101 02:00]:
> Remove unused parameter 'num_pins_in_register' from
> pcs_allocate_pin_table().

Reviewed-by: Tony Lindgren <tony@atomide.com>

[PATCH v4 2/3] pinctrl: pinctrl-single: remove unused parameter

[Hanna Hawa]

Remove unused parameter 'pin_pos' from pcs_add_pin().

Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
---
 drivers/pinctrl/pinctrl-single.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 91c638b85d2c..f3394517cb2e 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -656,10 +656,8 @@ static const struct pinconf_ops pcs_pinconf_ops = {
  * pcs_add_pin() - add a pin to the static per controller pin array
  * @pcs: pcs driver instance
  * @offset: register offset from base
- * @pin_pos: unused
  */
-static int pcs_add_pin(struct pcs_device *pcs, unsigned offset,
-		unsigned pin_pos)
+static int pcs_add_pin(struct pcs_device *pcs, unsigned int offset)
 {
 	struct pcs_soc_data *pcs_soc = &pcs->socdata;
 	struct pinctrl_pin_desc *pin;
@@ -727,16 +725,14 @@ static int pcs_allocate_pin_table(struct pcs_device *pcs)
 		unsigned offset;
 		int res;
 		int byte_num;
-		int pin_pos = 0;
 
 		if (pcs->bits_per_mux) {
 			byte_num = (pcs->bits_per_pin * i) / BITS_PER_BYTE;
 			offset = (byte_num / mux_bytes) * mux_bytes;
-			pin_pos = i % num_pins_in_register;
 		} else {
 			offset = i * mux_bytes;
 		}
-		res = pcs_add_pin(pcs, offset, pin_pos);
+		res = pcs_add_pin(pcs, offset);
 		if (res < 0) {
 			dev_err(pcs->dev, "error adding pins: %i\n", res);
 			return res;
-- 
2.17.1

Re: [PATCH v4 2/3] pinctrl: pinctrl-single: remove unused parameter

[Tony Lindgren]

* Hanna Hawa <hhhawa@amazon.com> [700101 02:00]:
> Remove unused parameter 'pin_pos' from pcs_add_pin().

Reviewed-by: Tony Lindgren <tony@atomide.com>

[PATCH v4 3/3] pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux is not zero

[Hanna Hawa]

A System Error (SError, followed by kernel panic) was detected when
trying to print the supported pins in a pinctrl device which supports
multiple pins per register. This change fixes the pcs_pin_dbg_show() in
pinctrl-single driver when bits_per_mux is not zero. In addition move
offset calculation and pin offset in register to common function.

Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/pinctrl/pinctrl-single.c | 55 ++++++++++++++++++++------------
 1 file changed, 35 insertions(+), 20 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index f3394517cb2e..39aac32ed09c 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -270,20 +270,44 @@ static void __maybe_unused pcs_writel(unsigned val, void __iomem *reg)
 	writel(val, reg);
 }
 
+static unsigned int pcs_pin_reg_offset_get(struct pcs_device *pcs,
+					   unsigned int pin)
+{
+	unsigned int mux_bytes = pcs->width / BITS_PER_BYTE;
+
+	if (pcs->bits_per_mux) {
+		unsigned int pin_offset_bytes;
+
+		pin_offset_bytes = (pcs->bits_per_pin * pin) / BITS_PER_BYTE;
+		return (pin_offset_bytes / mux_bytes) * mux_bytes;
+	}
+
+	return pin * mux_bytes;
+}
+
+static unsigned int pcs_pin_shift_reg_get(struct pcs_device *pcs,
+					  unsigned int pin)
+{
+	return (pin % (pcs->width / pcs->bits_per_pin)) * pcs->bits_per_pin;
+}
+
 static void pcs_pin_dbg_show(struct pinctrl_dev *pctldev,
 					struct seq_file *s,
 					unsigned pin)
 {
 	struct pcs_device *pcs;
-	unsigned val, mux_bytes;
+	unsigned int val;
 	unsigned long offset;
 	size_t pa;
 
 	pcs = pinctrl_dev_get_drvdata(pctldev);
 
-	mux_bytes = pcs->width / BITS_PER_BYTE;
-	offset = pin * mux_bytes;
+	offset = pcs_pin_reg_offset_get(pcs, pin);
 	val = pcs->read(pcs->base + offset);
+
+	if (pcs->bits_per_mux)
+		val &= pcs->fmask << pcs_pin_shift_reg_get(pcs, pin);
+
 	pa = pcs->res->start + offset;
 
 	seq_printf(s, "%zx %08x %s ", pa, val, DRIVER_NAME);
@@ -384,7 +408,6 @@ static int pcs_request_gpio(struct pinctrl_dev *pctldev,
 	struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
 	struct pcs_gpiofunc_range *frange = NULL;
 	struct list_head *pos, *tmp;
-	int mux_bytes = 0;
 	unsigned data;
 
 	/* If function mask is null, return directly. */
@@ -392,29 +415,27 @@ static int pcs_request_gpio(struct pinctrl_dev *pctldev,
 		return -ENOTSUPP;
 
 	list_for_each_safe(pos, tmp, &pcs->gpiofuncs) {
+		u32 offset;
+
 		frange = list_entry(pos, struct pcs_gpiofunc_range, node);
 		if (pin >= frange->offset + frange->npins
 			|| pin < frange->offset)
 			continue;
-		mux_bytes = pcs->width / BITS_PER_BYTE;
 
-		if (pcs->bits_per_mux) {
-			int byte_num, offset, pin_shift;
+		offset = pcs_pin_reg_offset_get(pcs, pin);
 
-			byte_num = (pcs->bits_per_pin * pin) / BITS_PER_BYTE;
-			offset = (byte_num / mux_bytes) * mux_bytes;
-			pin_shift = pin % (pcs->width / pcs->bits_per_pin) *
-				    pcs->bits_per_pin;
+		if (pcs->bits_per_mux) {
+			int pin_shift = pcs_pin_shift_reg_get(pcs, pin);
 
 			data = pcs->read(pcs->base + offset);
 			data &= ~(pcs->fmask << pin_shift);
 			data |= frange->gpiofunc << pin_shift;
 			pcs->write(data, pcs->base + offset);
 		} else {
-			data = pcs->read(pcs->base + pin * mux_bytes);
+			data = pcs->read(pcs->base + offset);
 			data &= ~pcs->fmask;
 			data |= frange->gpiofunc;
-			pcs->write(data, pcs->base + pin * mux_bytes);
+			pcs->write(data, pcs->base + offset);
 		}
 		break;
 	}
@@ -724,14 +745,8 @@ static int pcs_allocate_pin_table(struct pcs_device *pcs)
 	for (i = 0; i < pcs->desc.npins; i++) {
 		unsigned offset;
 		int res;
-		int byte_num;
 
-		if (pcs->bits_per_mux) {
-			byte_num = (pcs->bits_per_pin * i) / BITS_PER_BYTE;
-			offset = (byte_num / mux_bytes) * mux_bytes;
-		} else {
-			offset = i * mux_bytes;
-		}
+		offset = pcs_pin_reg_offset_get(pcs, i);
 		res = pcs_add_pin(pcs, offset);
 		if (res < 0) {
 			dev_err(pcs->dev, "error adding pins: %i\n", res);
-- 
2.17.1

Re: [PATCH v4 3/3] pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux is not zero

[Tony Lindgren]

* Hanna Hawa <hhhawa@amazon.com> [700101 02:00]:
> A System Error (SError, followed by kernel panic) was detected when
> trying to print the supported pins in a pinctrl device which supports
> multiple pins per register. This change fixes the pcs_pin_dbg_show() in
> pinctrl-single driver when bits_per_mux is not zero. In addition move
> offset calculation and pin offset in register to common function.

Reviewed-by: Tony Lindgren <tony@atomide.com>

Re: [PATCH v4 0/3] Fix pinctrl-single pcs_pin_dbg_show()

[Drew Fustini]

On Fri, Mar 19, 2021 at 05:21:30PM +0200, Hanna Hawa wrote:
> These patches fix the pcs_pin_dbg_show() function for the scenario where
> a single register controls multiple pins (i.e. bits_per_mux is not zero)
> Additionally, the common formula is moved to a separate function to
> allow reuse.
> 
> Changes since v3:
> -----------------
> - define and set variable 'mux_bytes' in one line
> - update commit message
> 
> Changes since v2:
> -----------------
> - move read() register to be outside of if condition (as it common
>   read()).
> - Remove extra parentheses
> - replace offset variable by direct return statements
> 
> Changes since v1:
> -----------------
> - remove unused variable in In function 'pcs_allocate_pin_table'
>   (Reported-by: kernel test robot <lkp@intel.com>)
> 
> Hanna Hawa (3):
>   pinctrl: pinctrl-single: remove unused variable
>   pinctrl: pinctrl-single: remove unused parameter
>   pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux is
>     not zero
> 
>  drivers/pinctrl/pinctrl-single.c | 65 ++++++++++++++++++--------------
>  1 file changed, 37 insertions(+), 28 deletions(-)
> 
> -- 
> 2.17.1
> 

I'm curious what SoC are you using?

It's good to know who has hardware to test bits_per_mux in the future.

I pay attention to pinctrl-single as that is the driver used for the TI
AM3358 SoC used in a variety of BeagleBone boards.  It does not use 
bits_per_mux, but I can verify that this does not cause any regression
for the AM3358 SoC:

  /sys/kernel/debug/pinctrl/44e10800.pinmux-pinctrl-single# cat pins
  registered pins: 142
  pin 0 (PIN0) 0:? 44e10800 00000027 pinctrl-single
  pin 1 (PIN1) 0:? 44e10804 00000027 pinctrl-single
  pin 2 (PIN2) 0:? 44e10808 00000027 pinctrl-single
  pin 3 (PIN3) 0:? 44e1080c 00000027 pinctrl-single
  pin 4 (PIN4) 0:? 44e10810 00000027 pinctrl-single
  pin 5 (PIN5) 0:? 44e10814 00000027 pinctrl-single
  pin 6 (PIN6) 0:? 44e10818 00000027 pinctrl-single
  pin 7 (PIN7) 0:? 44e1081c 00000027 pinctrl-single
  pin 8 (PIN8) 22:gpio-96-127 44e10820 00000027 pinctrl-single
  pin 9 (PIN9) 23:gpio-96-127 44e10824 00000037 pinctrl-single
  pin 10 (PIN10) 26:gpio-96-127 44e10828 00000037 pinctrl-single
  pin 11 (PIN11) 27:gpio-96-127 44e1082c 00000037 pinctrl-single
  pin 12 (PIN12) 0:? 44e10830 00000037 pinctrl-single
  <snip>
  pin 140 (PIN140) 0:? 44e10a30 00000028 pinctrl-single
  pin 141 (PIN141) 13:gpio-64-95 44e10a34 00000020 pinctrl-single

Reviewed-by: Drew Fustini <drew@beagleboard.org>

Thanks,
Drew

Re: [PATCH v4 0/3] Fix pinctrl-single pcs_pin_dbg_show()

[Hawa, Hanna]

On 3/22/2021 7:56 AM, Drew Fustini wrote:
> I'm curious what SoC are you using?

I'm working on Amazon Annapurna Labs SoCs (based on ARM cortex 
processors). That include multiple pins controlled with same register.

> 
> It's good to know who has hardware to test bits_per_mux in the future.
> 
> I pay attention to pinctrl-single as that is the driver used for the TI
> AM3358 SoC used in a variety of BeagleBone boards.  It does not use
> bits_per_mux, but I can verify that this does not cause any regression
> for the AM3358 SoC:
> 
>    /sys/kernel/debug/pinctrl/44e10800.pinmux-pinctrl-single# cat pins
>    registered pins: 142
>    pin 0 (PIN0) 0:? 44e10800 00000027 pinctrl-single
>    pin 1 (PIN1) 0:? 44e10804 00000027 pinctrl-single
>    pin 2 (PIN2) 0:? 44e10808 00000027 pinctrl-single
>    pin 3 (PIN3) 0:? 44e1080c 00000027 pinctrl-single
>    pin 4 (PIN4) 0:? 44e10810 00000027 pinctrl-single
>    pin 5 (PIN5) 0:? 44e10814 00000027 pinctrl-single
>    pin 6 (PIN6) 0:? 44e10818 00000027 pinctrl-single
>    pin 7 (PIN7) 0:? 44e1081c 00000027 pinctrl-single
>    pin 8 (PIN8) 22:gpio-96-127 44e10820 00000027 pinctrl-single
>    pin 9 (PIN9) 23:gpio-96-127 44e10824 00000037 pinctrl-single
>    pin 10 (PIN10) 26:gpio-96-127 44e10828 00000037 pinctrl-single
>    pin 11 (PIN11) 27:gpio-96-127 44e1082c 00000037 pinctrl-single
>    pin 12 (PIN12) 0:? 44e10830 00000037 pinctrl-single
>    <snip>
>    pin 140 (PIN140) 0:? 44e10a30 00000028 pinctrl-single
>    pin 141 (PIN141) 13:gpio-64-95 44e10a34 00000020 pinctrl-single
> 
> Reviewed-by: Drew Fustini<drew@beagleboard.org>

Thanks for review and verify the change.

Thanks,
Hanna

> 
> Thanks,
> Drew

Re: [PATCH v4 0/3] Fix pinctrl-single pcs_pin_dbg_show()

[Linus Walleij]

On Fri, Mar 19, 2021 at 4:22 PM Hanna Hawa <hhhawa@amazon.com> wrote:

> These patches fix the pcs_pin_dbg_show() function for the scenario where
> a single register controls multiple pins (i.e. bits_per_mux is not zero)
> Additionally, the common formula is moved to a separate function to
> allow reuse.

This v4 patch set applied!

Yours,
Linus Walleij