Linux-parisc Archive on lore.kernel.org
 help / color / Atom feed
From: Meelis Roos <mroos@linux.ee>
To: linux-parisc@vger.kernel.org
Subject: A500 boot crash in 4.2.0-rc3-00246-g763e326
Date: Wed, 12 Aug 2015 23:35:30 +0300 (EEST)
Message-ID: <alpine.LRH.2.11.1507260929000.30065@math.ut.ee> (raw)

Tried 4.2.0-rc3-00246-g763e326 on A500 but it crashes on boot. This is 
still present in todays 4.2.0-rc6+git. 4.1 was fine, I Will bisect but 
it takes time.

PDC Stable Storage facility v0.30
STI GSC/PCI core graphics driver Version 0.9b
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial 0000:00:04.0: enabling device (0146 -> 0147)
console [ttyS0] disabled
0000:00:04.0: ttyS0 at MMIO 0xfffffffff8000000 (irq = 21, base_baud = 115200) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [ttyB0] disabled
bootconsole [ttyB0] disabled
0000:00:04.0: ttyS1 at MMIO 0xfffffffff8000008 (irq = 21, base_baud = 115200) is a 16550A
0000:00:04.0: ttyS2 at MMIO 0xfffffffff8000010 (irq = 21, base_baud = 115200) is a 16550A
serial 0000:00:05.0: enabling device (0000 -> 0003)
serial 0000:00:05.0: enabling SERR and PARITY (0003 -> 0143)
0000:00:05.0: ttyS3 at MMIO 0xfffffffff8003000 (irq = 22, base_baud = 115200) is a 16550A
serial 0000:00:05.0: Couldn't register serial port 0, irq 22, type 2, error -28
sym53c8xx 0000:00:01.0: enabling device (0000 -> 0003)
sym53c8xx 0000:00:01.0: enabling SERR and PARITY (0003 -> 0143)

************* SYSTEM ALERT **************
SYSTEM NAME: a500-m
DATE: 07/26/2015 TIME: 06:06:56
ALERT LEVEL: 7 = reserved

REASON FOR ALERT
SOURCE: 0 = unknown, no source stated
SOURCE DETAIL: 0 = unknown, no source stated   SOURCE ID: FF
PROBLEM DETAIL: 0 = no problem detail

LEDs:  RUN      ATTENTION     FAULT     REMOTE     POWER
       ON       FLASH         OFF       ON         ON
LED State: There was a system interruption that did not take the system 
down.
Check Chassis and Console Logs for error messages.

0x0000007000FF6292 00000000 00000000 - type  0 = Data Field Unused
0x5800087000FF6292 00007306 1A060638 - type 11 = Timestamp 07/26/2015 
06:06:56
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:a
*****************************************




-- 
Meelis Roos (mroos@linux.ee)

             reply index

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-12 20:35 Meelis Roos [this message]
2015-08-13 11:32 ` John David Anglin
2015-08-13 15:42   ` Meelis Roos
2015-08-13 16:49     ` John David Anglin
2015-08-14  6:35   ` Meelis Roos
2015-08-14 11:29     ` John David Anglin
2015-08-13 11:35 ` John David Anglin
2015-08-13 15:42   ` Meelis Roos
2015-08-17 14:06 ` Aw: " Helge Deller
2015-08-18 13:01   ` Helge Deller
2015-08-18 18:44     ` Meelis Roos
2015-08-18 19:47       ` Helge Deller
2015-08-18 21:24         ` Yinghai Lu
2015-08-19  4:48           ` Meelis Roos
2015-08-19  5:30             ` Yinghai Lu
2015-08-19 11:25               ` John David Anglin
2015-08-19 14:06                 ` Aw: " Helge Deller
2015-08-20  5:42                   ` Bjorn Helgaas
2015-08-20  6:53                     ` Helge Deller
2015-08-20 19:31                     ` Yinghai Lu
2015-08-20 21:15                       ` Helge Deller
2015-08-20 21:30                         ` Bjorn Helgaas
2015-08-19 10:40           ` Aw: " Meelis Roos

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LRH.2.11.1507260929000.30065@math.ut.ee \
    --to=mroos@linux.ee \
    --cc=linux-parisc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-parisc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-parisc/0 linux-parisc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-parisc linux-parisc/ https://lore.kernel.org/linux-parisc \
		linux-parisc@vger.kernel.org
	public-inbox-index linux-parisc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-parisc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git