Linux-parisc archive on lore.kernel.org
 help / color / Atom feed
From: afzal mohammed <afzal.mohd.ma@gmail.com>
To: linux-parisc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>,
	Helge Deller <deller@gmx.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Allison Randal <allison@lohutok.net>,
	Richard Fontana <rfontana@redhat.com>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH 09/18] parisc: Replace setup_irq() by request_irq()
Date: Wed, 12 Feb 2020 13:34:14 +0530
Message-ID: <ce37741c4606e3b86b2b1db51c42e68e61d43563.1581478324.git.afzal.mohd.ma@gmail.com> (raw)
In-Reply-To: <cover.1581478323.git.afzal.mohd.ma@gmail.com>

request_irq() is preferred over setup_irq(). Existing callers of
setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
memory allocators are ready by 'mm_init()'.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---

Since cc'ing cover letter to all maintainers/reviewers would be too
many, refer for cover letter,
 https://lkml.kernel.org/r/cover.1581478323.git.afzal.mohd.ma@gmail.com

 arch/parisc/kernel/irq.c | 21 +++++----------------
 drivers/parisc/eisa.c    |  8 ++------
 2 files changed, 7 insertions(+), 22 deletions(-)

diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index e5fcfb70cc7c..b8fd4ae6b2cf 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -560,20 +560,6 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 	goto out;
 }
 
-static struct irqaction timer_action = {
-	.handler = timer_interrupt,
-	.name = "timer",
-	.flags = IRQF_TIMER | IRQF_PERCPU | IRQF_IRQPOLL,
-};
-
-#ifdef CONFIG_SMP
-static struct irqaction ipi_action = {
-	.handler = ipi_interrupt,
-	.name = "IPI",
-	.flags = IRQF_PERCPU,
-};
-#endif
-
 static void claim_cpu_irqs(void)
 {
 	int i;
@@ -583,10 +569,13 @@ static void claim_cpu_irqs(void)
 	}
 
 	irq_set_handler(TIMER_IRQ, handle_percpu_irq);
-	setup_irq(TIMER_IRQ, &timer_action);
+	if (request_irq(TIMER_IRQ, timer_interrupt,
+			IRQF_TIMER | IRQF_PERCPU | IRQF_IRQPOLL, "timer", NULL))
+		pr_err("request_irq() on %s failed\n", "timer");
 #ifdef CONFIG_SMP
 	irq_set_handler(IPI_IRQ, handle_percpu_irq);
-	setup_irq(IPI_IRQ, &ipi_action);
+	if (request_irq(IPI_IRQ, ipi_interrupt, IRQF_PERCPU, "IPI", NULL))
+		pr_err("request_irq() on %s failed\n", "IPI");
 #endif
 }
 
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 9d00a24277aa..fa75e6740de2 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -243,11 +243,6 @@ static irqreturn_t dummy_irq2_handler(int _, void *dev)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction irq2_action = {
-	.handler = dummy_irq2_handler,
-	.name = "cascade",
-};
-
 static void init_eisa_pic(void)
 {
 	unsigned long flags;
@@ -335,7 +330,8 @@ static int __init eisa_probe(struct parisc_device *dev)
 	}
 
 	/* Reserve IRQ2 */
-	setup_irq(2, &irq2_action);
+	if (request_irq(2, dummy_irq2_handler, 0, "cascade", NULL))
+		pr_err("request_irq() on %s failed\n", "cascade");
 	for (i = 0; i < 16; i++) {
 		irq_set_chip_and_handler(i, &eisa_interrupt_type,
 					 handle_simple_irq);
-- 
2.24.1


  reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-12  8:01 [PATCH 00/18] genirq: Remove setup_irq() afzal mohammed
2020-02-12  8:04 ` afzal mohammed [this message]
2020-02-27 10:31 ` Thomas Gleixner
2020-02-27 11:07   ` afzal mohammed

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ce37741c4606e3b86b2b1db51c42e68e61d43563.1581478324.git.afzal.mohd.ma@gmail.com \
    --to=afzal.mohd.ma@gmail.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=allison@lohutok.net \
    --cc=deller@gmx.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-parisc@vger.kernel.org \
    --cc=rfontana@redhat.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-parisc archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-parisc/0 linux-parisc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-parisc linux-parisc/ https://lore.kernel.org/linux-parisc \
		linux-parisc@vger.kernel.org
	public-inbox-index linux-parisc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-parisc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git