From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 5A8972590 for ; Sun, 22 Jan 2023 15:25:38 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id D307DC433EF; Sun, 22 Jan 2023 15:25:37 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=linuxfoundation.org; s=korg; t=1674401138; bh=qQ1RV7l1mrwUbBTh93hLRk9y/ZLSfwu3gD5+ghR5iA0=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=jsc3cWbK3t++6xLmHEac9P0svuo7DJO6DlJx+NSQMrEwjZM5rQ6KCZHRaI5bMSoo4 g/CtVXyo4FKRvf1fud72rNFsEvZeuOCRsU/VtX7PsKht0ImPDntFcbjIe30/ce7Aey c7nZg0bNLwwzkPCRdXiASSnK7CQwGydlSC54Jsf8= From: Greg Kroah-Hartman To: stable@vger.kernel.org Cc: Greg Kroah-Hartman , patches@lists.linux.dev, Krzysztof Kozlowski , Jiri Slaby Subject: [PATCH 6.1 097/193] tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer Date: Sun, 22 Jan 2023 16:03:46 +0100 Message-Id: <20230122150250.764707724@linuxfoundation.org> X-Mailer: git-send-email 2.39.1 In-Reply-To: <20230122150246.321043584@linuxfoundation.org> References: <20230122150246.321043584@linuxfoundation.org> User-Agent: quilt/0.67 Precedence: bulk X-Mailing-List: patches@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Krzysztof Kozlowski commit b8caf69a6946e18ffebad49847e258f5b6d52ac2 upstream. Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on default RX FIFO depth, e.g. 16. Later during serial startup the qcom_geni_serial_port_setup() updates the RX FIFO depth (port->rx_fifo_depth) to match real device capabilities, e.g. to 32. The RX UART handle code will read "port->rx_fifo_depth" number of words into "port->rx_fifo" buffer, thus exceeding the bounds. This can be observed in certain configurations with Qualcomm Bluetooth HCI UART device and KASAN: Bluetooth: hci0: QCA Product ID :0x00000010 Bluetooth: hci0: QCA SOC Version :0x400a0200 Bluetooth: hci0: QCA ROM Version :0x00000200 Bluetooth: hci0: QCA Patch Version:0x00000d2b Bluetooth: hci0: QCA controller version 0x02000200 Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2 Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2) Bluetooth: hci0: QCA Failed to download patch (-2) ================================================================== BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c Write of size 4 at addr ffff279347d578c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x8c/0xb8 print_report+0x188/0x488 kasan_report+0xb4/0x100 __asan_store4+0x80/0xa4 handle_rx_uart+0xa8/0x18c qcom_geni_serial_handle_rx+0x84/0x9c qcom_geni_serial_isr+0x24c/0x760 __handle_irq_event_percpu+0x108/0x500 handle_irq_event+0x6c/0x110 handle_fasteoi_irq+0x138/0x2cc generic_handle_domain_irq+0x48/0x64 If the RX FIFO depth changes after probe, be sure to resize the buffer. Fixes: f9d690b6ece7 ("tty: serial: qcom_geni_serial: Allocate port->rx_fifo buffer in probe") Cc: Signed-off-by: Krzysztof Kozlowski Reviewed-by: Jiri Slaby Link: https://lore.kernel.org/r/20221221164022.1087814-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/qcom_geni_serial.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -864,9 +864,10 @@ out_unlock: return IRQ_HANDLED; } -static void get_tx_fifo_size(struct qcom_geni_serial_port *port) +static int setup_fifos(struct qcom_geni_serial_port *port) { struct uart_port *uport; + u32 old_rx_fifo_depth = port->rx_fifo_depth; uport = &port->uport; port->tx_fifo_depth = geni_se_get_tx_fifo_depth(&port->se); @@ -874,6 +875,16 @@ static void get_tx_fifo_size(struct qcom port->rx_fifo_depth = geni_se_get_rx_fifo_depth(&port->se); uport->fifosize = (port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE; + + if (port->rx_fifo && (old_rx_fifo_depth != port->rx_fifo_depth) && port->rx_fifo_depth) { + port->rx_fifo = devm_krealloc(uport->dev, port->rx_fifo, + port->rx_fifo_depth * sizeof(u32), + GFP_KERNEL); + if (!port->rx_fifo) + return -ENOMEM; + } + + return 0; } @@ -888,6 +899,7 @@ static int qcom_geni_serial_port_setup(s u32 rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT; u32 proto; u32 pin_swap; + int ret; proto = geni_se_read_proto(&port->se); if (proto != GENI_SE_UART) { @@ -897,7 +909,9 @@ static int qcom_geni_serial_port_setup(s qcom_geni_serial_stop_rx(uport); - get_tx_fifo_size(port); + ret = setup_fifos(port); + if (ret) + return ret; writel(rxstale, uport->membase + SE_UART_RX_STALE_CNT);