linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
To: Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"dmaengine@vger.kernel.org" <dmaengine@vger.kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Russell King <rmk+kernel@armlinux.org.uk>,
	Eugeniy Paltsev <eugeniy.paltsev@synopsys.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Niklas Cassel <niklas.cassel@linaro.org>,
	Joao Pinto <joao.pinto@synopsys.com>,
	Jose Abreu <jose.abreu@synopsys.com>,
	Luis de Oliveira <luis.oliveira@synopsys.com>,
	"Vitor Soares" <vitor.soares@synopsys.com>,
	Nelson Costa <nelson.costa@synopsys.com>,
	Pedro Sousa <pedrom.sousa@synopsys.com>
Subject: Re: [RFC v4 0/6] dmaengine: Add Synopsys eDMA IP driver (version 0)
Date: Mon, 11 Feb 2019 17:32:27 +0000	[thread overview]
Message-ID: <088d792c-a90a-8007-56da-2ea84bbbc6ff@synopsys.com> (raw)
In-Reply-To: <cover.1549904495.git.gustavo.pimentel@synopsys.com>

Hi all,

On 11/02/2019 17:03, Gustavo Pimentel wrote:
> Add Synopsys eDMA IP driver (version 0 and for EP side only) to Linux
> kernel. This IP is generally distributed with Synopsys PCIe EndPoint IP
> (depends of the use and licensing agreement), which supports:
>  - legacy and unroll modes
>  - 16 independent and concurrent channels (8 write + 8 read)
>  - supports linked list (scatter-gather) transfer
>  - each linked list descriptor can transfer from 1 byte to 4 Gbytes
>  - supports cyclic transfer
>  - PCIe EndPoint glue-logic
> 
> This patch series contains: 
>  - eDMA core + eDMA core v0 driver (implements the interface with
>  DMAengine controller APIs and interfaces with eDMA HW block)
>  - eDMA PCIe glue-logic reference driver (attaches to Synopsys EP and
>  provides memory access to eDMA core driver)
> 
>   dmaengine: Add Synopsys eDMA IP core driver
>   dmaengine: Add Synopsys eDMA IP version 0 support
>   dmaengine: Add Synopsys eDMA IP version 0 debugfs support
>   PCI: Add Synopsys endpoint EDDA Device ID
>   dmaengine: Add Synopsys eDMA IP PCIe glue-logic
>   MAINTAINERS: Add Synopsys eDMA IP driver maintainer
> 
>  MAINTAINERS                              |    7 +
>  drivers/dma/Kconfig                      |    2 +
>  drivers/dma/Makefile                     |    1 +
>  drivers/dma/dw-edma/Kconfig              |   18 +
>  drivers/dma/dw-edma/Makefile             |    7 +
>  drivers/dma/dw-edma/dw-edma-core.c       | 1069 ++++++++++++++++++++++++++++++
>  drivers/dma/dw-edma/dw-edma-core.h       |  164 +++++
>  drivers/dma/dw-edma/dw-edma-pcie.c       |  227 +++++++
>  drivers/dma/dw-edma/dw-edma-v0-core.c    |  346 ++++++++++
>  drivers/dma/dw-edma/dw-edma-v0-core.h    |   26 +
>  drivers/dma/dw-edma/dw-edma-v0-debugfs.c |  359 ++++++++++
>  drivers/dma/dw-edma/dw-edma-v0-debugfs.h |   26 +
>  drivers/dma/dw-edma/dw-edma-v0-regs.h    |  156 +++++
>  drivers/misc/pci_endpoint_test.c         |    2 +-
>  include/linux/dma/edma.h                 |   43 ++
>  include/linux/pci_ids.h                  |    1 +
>  16 files changed, 2453 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/dma/dw-edma/Kconfig
>  create mode 100644 drivers/dma/dw-edma/Makefile
>  create mode 100644 drivers/dma/dw-edma/dw-edma-core.c
>  create mode 100644 drivers/dma/dw-edma/dw-edma-core.h
>  create mode 100644 drivers/dma/dw-edma/dw-edma-pcie.c
>  create mode 100644 drivers/dma/dw-edma/dw-edma-v0-core.c
>  create mode 100644 drivers/dma/dw-edma/dw-edma-v0-core.h
>  create mode 100644 drivers/dma/dw-edma/dw-edma-v0-debugfs.c
>  create mode 100644 drivers/dma/dw-edma/dw-edma-v0-debugfs.h
>  create mode 100644 drivers/dma/dw-edma/dw-edma-v0-regs.h
>  create mode 100644 include/linux/dma/edma.h
> 
> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Russell King <rmk+kernel@armlinux.org.uk>
> Cc: Eugeniy Paltsev <paltsev@synopsys.com>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: Kishon Vijay Abraham I <kishon@ti.com>
> Cc: Niklas Cassel <niklas.cassel@linaro.org>
> Cc: Joao Pinto <jpinto@synopsys.com>
> Cc: Jose Abreu <jose.abreu@synopsys.com>
> Cc: Luis Oliveira <lolivei@synopsys.com>
> Cc: Vitor Soares <vitor.soares@synopsys.com>
> Cc: Nelson Costa <nelson.costa@synopsys.com>
> Cc: Pedro Sousa <pedrom.sousa@synopsys.com>
> 

Disregard this patch series please. I have sent a new patch series (v5) fixing
missing stuff.

Regards,
Gustavo

      parent reply	other threads:[~2019-02-11 17:37 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-11 17:03 [RFC v4 0/6] dmaengine: Add Synopsys eDMA IP driver (version 0) Gustavo Pimentel
2019-02-11 17:03 ` [RFC v4 1/6] dmaengine: Add Synopsys eDMA IP core driver Gustavo Pimentel
2019-02-11 17:03 ` [RFC v4 2/6] dmaengine: Add Synopsys eDMA IP version 0 support Gustavo Pimentel
2019-02-11 17:03 ` [RFC v4 3/6] dmaengine: Add Synopsys eDMA IP version 0 debugfs support Gustavo Pimentel
2019-02-11 17:03 ` [RFC v4 4/6] PCI: Add Synopsys endpoint EDDA Device ID Gustavo Pimentel
2019-02-11 17:03 ` [RFC v4 5/6] dmaengine: Add Synopsys eDMA IP PCIe glue-logic Gustavo Pimentel
2019-02-11 17:03 ` [RFC v4 6/6] MAINTAINERS: Add Synopsys eDMA IP driver maintainer Gustavo Pimentel
2019-02-11 17:32 ` Gustavo Pimentel [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=088d792c-a90a-8007-56da-2ea84bbbc6ff@synopsys.com \
    --to=gustavo.pimentel@synopsys.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=eugeniy.paltsev@synopsys.com \
    --cc=joao.pinto@synopsys.com \
    --cc=jose.abreu@synopsys.com \
    --cc=kishon@ti.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=luis.oliveira@synopsys.com \
    --cc=nelson.costa@synopsys.com \
    --cc=niklas.cassel@linaro.org \
    --cc=pedrom.sousa@synopsys.com \
    --cc=rmk+kernel@armlinux.org.uk \
    --cc=vitor.soares@synopsys.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).