From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Mika Westerberg <mika.westerberg@linux.intel.com>,
Bjorn Helgaas <bhelgaas@google.com>
Cc: Len Brown <lenb@kernel.org>, Lukas Wunner <lukas@wunner.de>,
Keith Busch <keith.busch@intel.com>,
Alex Williamson <alex.williamson@redhat.com>,
Alexandru Gagniuc <mr.nuke.me@gmail.com>,
Kai-Heng Feng <kai.heng.feng@canonical.com>,
Paul Menzel <pmenzel@molgen.mpg.de>,
Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/2] PCI: Introduce pcie_wait_for_link_delay()
Date: Thu, 07 Nov 2019 14:44:29 +0100 [thread overview]
Message-ID: <12302896.6UPH59xr33@kreacher> (raw)
In-Reply-To: <20191107121847.24781-2-mika.westerberg@linux.intel.com>
On Thursday, November 7, 2019 1:18:46 PM CET Mika Westerberg wrote:
> This is otherwise similar to pcie_wait_for_link() but allows passing
> custom activation delay in milliseconds.
>
> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
No issues found:
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> drivers/pci/pci.c | 21 ++++++++++++++++++---
> 1 file changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index ecc775793c3c..7083adc07f5c 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -4588,14 +4588,17 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
>
> return pci_dev_wait(dev, "PM D3hot->D0", PCIE_RESET_READY_POLL_MS);
> }
> +
> /**
> - * pcie_wait_for_link - Wait until link is active or inactive
> + * pcie_wait_for_link_delay - Wait until link is active or inactive
> * @pdev: Bridge device
> * @active: waiting for active or inactive?
> + * @delay: Delay to wait after link has become active (in ms)
> *
> * Use this to wait till link becomes active or inactive.
> */
> -bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
> +static bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active,
> + int delay)
> {
> int timeout = 1000;
> bool ret;
> @@ -4632,13 +4635,25 @@ bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
> timeout -= 10;
> }
> if (active && ret)
> - msleep(100);
> + msleep(delay);
> else if (ret != active)
> pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
> active ? "set" : "cleared");
> return ret == active;
> }
>
> +/**
> + * pcie_wait_for_link - Wait until link is active or inactive
> + * @pdev: Bridge device
> + * @active: waiting for active or inactive?
> + *
> + * Use this to wait till link becomes active or inactive.
> + */
> +bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
> +{
> + return pcie_wait_for_link_delay(pdev, active, 100);
> +}
> +
> void pci_reset_secondary_bus(struct pci_dev *dev)
> {
> u16 ctrl;
>
next prev parent reply other threads:[~2019-11-07 13:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-07 12:18 [PATCH v3 0/2] PCI: Add missing link delays Mika Westerberg
2019-11-07 12:18 ` [PATCH v3 1/2] PCI: Introduce pcie_wait_for_link_delay() Mika Westerberg
2019-11-07 13:44 ` Rafael J. Wysocki [this message]
2019-11-07 12:18 ` [PATCH v3 2/2] PCI: Add missing link delays required by the PCIe spec Mika Westerberg
2019-11-09 14:49 ` Lukas Wunner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12302896.6UPH59xr33@kreacher \
--to=rjw@rjwysocki.net \
--cc=alex.williamson@redhat.com \
--cc=bhelgaas@google.com \
--cc=kai.heng.feng@canonical.com \
--cc=keith.busch@intel.com \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=mika.westerberg@linux.intel.com \
--cc=mr.nuke.me@gmail.com \
--cc=nicholas.johnson-opensource@outlook.com.au \
--cc=pmenzel@molgen.mpg.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).