From: Ray Jui <rjui@broadcom.com>
To: Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>, Arnd Bergmann <arnd@arndb.de>,
Mark Rutland <mark.rutland@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Hauke Mehrtens <hauke@hauke-m.de>
Cc: <linux-kernel@vger.kernel.org>,
<bcm-kernel-feedback-list@broadcom.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-pci@vger.kernel.org>, Ray Jui <rjui@broadcom.com>,
Jon Mason <jonmason@broadcom.com>
Subject: [PATCH v3 4/4] arm64: dts: Add Broadcom North Star 2 support
Date: Wed, 15 Jul 2015 21:39:23 -0700 [thread overview]
Message-ID: <1437021563-29139-5-git-send-email-rjui@broadcom.com> (raw)
In-Reply-To: <1437021563-29139-1-git-send-email-rjui@broadcom.com>
Add Broadcom NS2 device tree binding document. Also add initial device
tree dtsi for Broadcom North Star 2 (NS2) SoC and board support for NS2
SVK board
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
Documentation/devicetree/bindings/arm/bcm/ns2.txt | 9 ++
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/broadcom/Makefile | 5 +
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 59 +++++++++++
arch/arm64/boot/dts/broadcom/ns2.dtsi | 118 +++++++++++++++++++++
5 files changed, 192 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/ns2.txt
create mode 100644 arch/arm64/boot/dts/broadcom/Makefile
create mode 100644 arch/arm64/boot/dts/broadcom/ns2-svk.dts
create mode 100644 arch/arm64/boot/dts/broadcom/ns2.dtsi
diff --git a/Documentation/devicetree/bindings/arm/bcm/ns2.txt b/Documentation/devicetree/bindings/arm/bcm/ns2.txt
new file mode 100644
index 0000000..35f056f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/ns2.txt
@@ -0,0 +1,9 @@
+Broadcom North Star 2 (NS2) device tree bindings
+------------------------------------------------
+
+Boards with NS2 shall have the following properties:
+
+Required root node property:
+
+NS2 SVK board
+compatible = "brcm,ns2-svk", "brcm,ns2";
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 38913be..9f95941 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,6 +1,7 @@
dts-dirs += amd
dts-dirs += apm
dts-dirs += arm
+dts-dirs += broadcom
dts-dirs += cavium
dts-dirs += exynos
dts-dirs += freescale
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
new file mode 100644
index 0000000..e21fe66
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
new file mode 100644
index 0000000..244baf8
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -0,0 +1,59 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "ns2.dtsi"
+
+/ {
+ model = "Broadcom NS2 SVK";
+ compatible = "brcm,ns2-svk", "brcm,ns2";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x000000000 0x80000000 0x00000000 0x40000000>;
+ };
+
+ soc: soc {
+ uart3: serial@66130000 {
+ status = "ok";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
new file mode 100644
index 0000000..3c92d92
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -0,0 +1,118 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x84b00000 0x00000008;
+
+/ {
+ compatible = "brcm,ns2";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0 0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x84b00000>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0 1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x84b00000>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0 2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x84b00000>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0 3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x84b00000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
+ IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
+ IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
+ IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
+ IRQ_TYPE_EDGE_RISING)>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+
+ gic: interrupt-controller@65210000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x65210000 0x1000>,
+ <0x65220000 0x1000>,
+ <0x65240000 0x2000>,
+ <0x65260000 0x1000>;
+ };
+
+ uart3: serial@66130000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x66130000 0x100>;
+ interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <23961600>;
+ status = "disabled";
+ };
+ };
+};
--
1.7.9.5
prev parent reply other threads:[~2015-07-16 4:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-16 4:39 [PATCH v3 0/4] Add Broadcom North Star 2 support Ray Jui
2015-07-16 4:39 ` [PATCH v3 1/4] PCI: iproc: enable arm64 support for iProc PCIe Ray Jui
2015-07-21 20:30 ` Bjorn Helgaas
2015-07-21 20:50 ` Ray Jui
2015-07-21 21:04 ` Ray Jui
2015-07-21 22:02 ` Bjorn Helgaas
2015-07-22 0:01 ` Ray Jui
2015-07-16 4:39 ` [PATCH v3 2/4] PCI: iproc: Fix ARM64 dependency in Kconfig Ray Jui
2015-07-16 4:39 ` [PATCH v3 3/4] arm64: Add Broadcom iProc family support Ray Jui
2015-07-16 4:39 ` Ray Jui [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437021563-29139-5-git-send-email-rjui@broadcom.com \
--to=rjui@broadcom.com \
--cc=arnd@arndb.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=hauke@hauke-m.de \
--cc=jonmason@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).