From: Matthew Minter <matt@masarand.com>
To: linux-pci@vger.kernel.org, bhelgaas@google.com,
Liviu.Dudau@arm.com, ddaney@caviumnetworks.com,
lorenzo.pieralisi@arm.com
Cc: Matthew Minter <matt@masarand.com>
Subject: [PATCH V4 20/29] mn10300: Defer PCI IRQ assignment to device enable time
Date: Fri, 23 Oct 2015 06:03:53 +0100 [thread overview]
Message-ID: <1445576642-29624-21-git-send-email-matt@masarand.com> (raw)
In-Reply-To: <1445576642-29624-1-git-send-email-matt@masarand.com>
PCI IRQs are being assigned during pcibios_irq_init currently, this causes
a problem by which hot-plug devices connected after boot will not recieve
an IRQ, this patch-set fixes this by registering the IRQ assignment
functions at boot, to then be called later by the device enable code.
Signed-off-by: Matthew Minter <matt@masarand.com>
---
arch/mn10300/unit-asb2305/pci-asb2305.h | 5 +----
arch/mn10300/unit-asb2305/pci-irq.c | 24 ++++--------------------
arch/mn10300/unit-asb2305/pci.c | 11 ++++++-----
3 files changed, 11 insertions(+), 29 deletions(-)
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h
index 96c484b..b7d5526 100644
--- a/arch/mn10300/unit-asb2305/pci-asb2305.h
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.h
@@ -60,9 +60,6 @@ struct irq_routing_table {
} __attribute__((packed));
extern unsigned int pcibios_irq_mask;
-
-extern void pcibios_irq_init(void);
-extern void pcibios_fixup_irqs(void);
-extern void pcibios_enable_irq(struct pci_dev *dev);
+extern int pci_map_irq(struct pci_dev *, u8 slot, u8 pin);
#endif /* PCI_ASB2305_H */
diff --git a/arch/mn10300/unit-asb2305/pci-irq.c b/arch/mn10300/unit-asb2305/pci-irq.c
index fcb28ce..d7d2ce9 100644
--- a/arch/mn10300/unit-asb2305/pci-irq.c
+++ b/arch/mn10300/unit-asb2305/pci-irq.c
@@ -20,27 +20,11 @@
#include <asm/smp.h>
#include "pci-asb2305.h"
-void __init pcibios_irq_init(void)
+int pci_map_irq(struct pci_dev *, u8 slot, u8 pin)
{
-}
-
-void __init pcibios_fixup_irqs(void)
-{
- struct pci_dev *dev = NULL;
- u8 line, pin;
+ u8 line;
- for_each_pci_dev(dev) {
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- if (pin) {
- dev->irq = XIRQ1;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
- dev->irq);
- }
- pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
- }
-}
-
-void pcibios_enable_irq(struct pci_dev *dev)
-{
+ dev->irq = XIRQ1;
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
}
diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
index 3dfe2d3..37a22a5 100644
--- a/arch/mn10300/unit-asb2305/pci.c
+++ b/arch/mn10300/unit-asb2305/pci.c
@@ -375,14 +375,17 @@ static int __init pcibios_init(void)
bus = pci_scan_root_bus(NULL, 0, &pci_direct_ampci, NULL, &resources);
if (!bus)
return 0;
-
- pcibios_irq_init();
- pcibios_fixup_irqs();
pcibios_resource_survey();
pci_bus_add_devices(bus);
return 0;
}
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ bridge->map_irq = pci_map_irq;
+ return 0;
+}
+
arch_initcall(pcibios_init);
char *__init pcibios_setup(char *str)
@@ -400,8 +403,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
int err;
err = pci_enable_resources(dev, mask);
- if (err == 0)
- pcibios_enable_irq(dev);
return err;
}
--
2.6.2
next prev parent reply other threads:[~2015-10-23 5:06 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-23 5:03 [PATCH V4] Delay allocation of PCI device IRQs from boot time until bus scan time to fix PCI hotplugging Matthew Minter
2015-10-23 5:03 ` [PATCH V4 01/29] PCI: Build setup-irq.o on all arches Matthew Minter
2015-10-23 5:03 ` [PATCH V4 02/29] PCI: Add a prototype for pci_find_host_bridge to pci.h Matthew Minter
2015-10-23 5:03 ` [PATCH V4 03/29] PCI: Add IRQ mapping function pointers to pci_host_bridge struct Matthew Minter
2015-10-23 5:03 ` [PATCH V4 04/29] PCI: Remove const from the pci_dev struct passed to pci_fixup_irqs Matthew Minter
2015-10-23 5:03 ` [PATCH V4 05/29] PCI: Add pci_assign_irq function and have pci_fixup_irqs use it Matthew Minter
2015-10-23 5:03 ` [PATCH V4 06/29] PCI: Add a call to pci_assign_irq in do_pci_enable_device Matthew Minter
2015-10-23 5:03 ` [PATCH V4 07/29] x86/pci: Move pcibios_root_bridge_prepare from acpi.c to irq.c Matthew Minter
2015-10-23 5:03 ` [PATCH V4 08/29] x86/pci: Defer IRQ assignment to device enable time Matthew Minter
2015-12-23 23:04 ` Bjorn Helgaas
2016-01-12 11:25 ` Lorenzo Pieralisi
2015-10-23 5:03 ` [PATCH V4 09/29] x86/pci: Pass pin into pcibios_lookup_irq rather than look it up Matthew Minter
2015-10-23 5:03 ` [PATCH V4 10/29] ARM/PCI: Defer IRQ assignment to device enable time Matthew Minter
2015-10-23 5:03 ` [PATCH V4 11/29] powerpc/pci: " Matthew Minter
2015-10-23 5:03 ` [PATCH V4 12/29] sh/PCI: Remove __init optimisations from IRQ mapping functions/data Matthew Minter
2015-10-23 5:03 ` [PATCH V4 13/29] sh/PCI: Defer IRQ assignment to device enable time Matthew Minter
2015-10-23 5:03 ` [PATCH V4 14/29] alpha/PCI: " Matthew Minter
2015-10-23 5:03 ` [PATCH V4 15/29] cris/PCI: " Matthew Minter
2015-10-23 5:03 ` [PATCH V4 16/29] frv/PCI: " Matthew Minter
2015-10-23 5:03 ` [PATCH V4 17/29] m68k/pci: " Matthew Minter
2015-10-23 5:44 ` kbuild test robot
2015-10-23 5:03 ` [PATCH V4 18/29] microblaze/PCI: " Matthew Minter
2015-10-23 5:40 ` kbuild test robot
2015-10-23 5:03 ` [PATCH V4 19/29] MIPS/PCI: " Matthew Minter
2015-10-23 6:02 ` kbuild test robot
2015-10-23 5:03 ` Matthew Minter [this message]
2015-10-23 5:03 ` [PATCH V4 21/29] mn10300: Remove pcibios_enable_device function Matthew Minter
2015-10-23 5:03 ` [PATCH V4 22/29] sparc/PCI: Defer IRQ assignment to device enable time Matthew Minter
2015-10-23 5:03 ` [PATCH V4 23/29] tile: pci: " Matthew Minter
2015-10-23 5:34 ` kbuild test robot
2015-10-23 5:03 ` [PATCH V4 24/29] unicore32/PCI: " Matthew Minter
2015-10-23 5:03 ` [PATCH V4 25/29] PCI: Update pci-versatile to use IRQ deferred assignment Matthew Minter
2015-10-23 5:03 ` [PATCH V4 26/29] PCI: Update pcie-iproc to use IRQ deffered assignment Matthew Minter
2015-10-23 5:04 ` [PATCH V4 27/29] PCI: Update pci-host-generic " Matthew Minter
2015-10-23 9:40 ` kbuild test robot
2015-10-23 5:04 ` [PATCH V4 28/29] of/pci: Fix comment for pci_fixup_irqs changing to pci_assign_irq Matthew Minter
2016-01-13 11:25 ` Lorenzo Pieralisi
2015-10-23 5:04 ` [PATCH V4 29/29] PCI: Remove pci_fixup_irqs function Matthew Minter
2015-12-07 17:32 ` [PATCH V4] Delay allocation of PCI device IRQs from boot time until bus scan time to fix PCI hotplugging Bjorn Helgaas
2015-12-18 21:54 ` Christopher Covington
2015-12-19 11:50 ` Matthew Minter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445576642-29624-21-git-send-email-matt@masarand.com \
--to=matt@masarand.com \
--cc=Liviu.Dudau@arm.com \
--cc=bhelgaas@google.com \
--cc=ddaney@caviumnetworks.com \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).