linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matthew Minter <matt@masarand.com>
To: linux-pci@vger.kernel.org, bhelgaas@google.com,
	Liviu.Dudau@arm.com, ddaney@caviumnetworks.com,
	lorenzo.pieralisi@arm.com
Cc: Matthew Minter <matt@masarand.com>
Subject: [PATCH V4 22/29] sparc/PCI: Defer IRQ assignment to device enable time
Date: Fri, 23 Oct 2015 06:03:55 +0100	[thread overview]
Message-ID: <1445576642-29624-23-git-send-email-matt@masarand.com> (raw)
In-Reply-To: <1445576642-29624-1-git-send-email-matt@masarand.com>

Currently sparc allocates PCI IRQs through several different methods
based on device. This is done during the boot stage and faces a draw-back
by which hot-plugged devices will not be allocated an IRQ, this is fixed
by registering IRQ allocation functions for later use during the device
enable path.

Signed-off-by: Matthew Minter <matt@masarand.com>
---
 arch/sparc/kernel/leon_pci.c | 12 ++++++++++--
 arch/sparc/kernel/pci.c      | 23 +++++++++++++++++++----
 2 files changed, 29 insertions(+), 6 deletions(-)

diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c
index 4371f72..ca11fb8 100644
--- a/arch/sparc/kernel/leon_pci.c
+++ b/arch/sparc/kernel/leon_pci.c
@@ -13,6 +13,8 @@
 #include <asm/leon.h>
 #include <asm/leon_pci.h>
 
+int (*leon_pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
+
 /* The LEON architecture does not rely on a BIOS or bootloader to setup
  * PCI for us. The Linux generic routines are used to setup resources,
  * reset values of configuration-space register settings are preserved.
@@ -39,14 +41,20 @@ void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info)
 		return;
 	}
 
-	/* Setup IRQs of all devices using custom routines */
-	pci_fixup_irqs(pci_common_swizzle, info->map_irq);
+	leon_pci_map_irq = info->map_irq;
 
 	/* Assign devices with resources */
 	pci_assign_unassigned_resources();
 	pci_bus_add_devices(root_bus);
 }
 
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	bridge->swizzle_irq = pci_common_swizzle;
+	bridge->map_irq = leon_pci_map_irq;
+	return 0;
+}
+
 void pcibios_fixup_bus(struct pci_bus *pbus)
 {
 	struct pci_dev *dev;
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b91d7f1..4841066 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -335,10 +335,6 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	} else {
 		dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
 		dev->rom_base_reg = PCI_ROM_ADDRESS;
-
-		dev->irq = sd->op->archdata.irqs[0];
-		if (dev->irq == 0xffffffff)
-			dev->irq = PCI_IRQ_NONE;
 	}
 
 	pci_parse_of_addrs(sd->op, node, dev);
@@ -351,6 +347,25 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	return dev;
 }
 
+int pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+	struct platform_device *op = of_find_device_by_node(dev->sysdata);
+
+	irq = op->archdata.irqs[0];
+	if (irq == 0xffffffff)
+		irq = PCI_IRQ_NONE;
+	return irq;
+}
+
+#ifndef CONFIG_LEON_PCI
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	bridge->map_irq = pci_map_irq;
+	return 0;
+}
+#endif
+
 static void apb_calc_first_last(u8 map, u32 *first_p, u32 *last_p)
 {
 	u32 idx, first, last;
-- 
2.6.2


  parent reply	other threads:[~2015-10-23  5:06 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-23  5:03 [PATCH V4] Delay allocation of PCI device IRQs from boot time until bus scan time to fix PCI hotplugging Matthew Minter
2015-10-23  5:03 ` [PATCH V4 01/29] PCI: Build setup-irq.o on all arches Matthew Minter
2015-10-23  5:03 ` [PATCH V4 02/29] PCI: Add a prototype for pci_find_host_bridge to pci.h Matthew Minter
2015-10-23  5:03 ` [PATCH V4 03/29] PCI: Add IRQ mapping function pointers to pci_host_bridge struct Matthew Minter
2015-10-23  5:03 ` [PATCH V4 04/29] PCI: Remove const from the pci_dev struct passed to pci_fixup_irqs Matthew Minter
2015-10-23  5:03 ` [PATCH V4 05/29] PCI: Add pci_assign_irq function and have pci_fixup_irqs use it Matthew Minter
2015-10-23  5:03 ` [PATCH V4 06/29] PCI: Add a call to pci_assign_irq in do_pci_enable_device Matthew Minter
2015-10-23  5:03 ` [PATCH V4 07/29] x86/pci: Move pcibios_root_bridge_prepare from acpi.c to irq.c Matthew Minter
2015-10-23  5:03 ` [PATCH V4 08/29] x86/pci: Defer IRQ assignment to device enable time Matthew Minter
2015-12-23 23:04   ` Bjorn Helgaas
2016-01-12 11:25     ` Lorenzo Pieralisi
2015-10-23  5:03 ` [PATCH V4 09/29] x86/pci: Pass pin into pcibios_lookup_irq rather than look it up Matthew Minter
2015-10-23  5:03 ` [PATCH V4 10/29] ARM/PCI: Defer IRQ assignment to device enable time Matthew Minter
2015-10-23  5:03 ` [PATCH V4 11/29] powerpc/pci: " Matthew Minter
2015-10-23  5:03 ` [PATCH V4 12/29] sh/PCI: Remove __init optimisations from IRQ mapping functions/data Matthew Minter
2015-10-23  5:03 ` [PATCH V4 13/29] sh/PCI: Defer IRQ assignment to device enable time Matthew Minter
2015-10-23  5:03 ` [PATCH V4 14/29] alpha/PCI: " Matthew Minter
2015-10-23  5:03 ` [PATCH V4 15/29] cris/PCI: " Matthew Minter
2015-10-23  5:03 ` [PATCH V4 16/29] frv/PCI: " Matthew Minter
2015-10-23  5:03 ` [PATCH V4 17/29] m68k/pci: " Matthew Minter
2015-10-23  5:44   ` kbuild test robot
2015-10-23  5:03 ` [PATCH V4 18/29] microblaze/PCI: " Matthew Minter
2015-10-23  5:40   ` kbuild test robot
2015-10-23  5:03 ` [PATCH V4 19/29] MIPS/PCI: " Matthew Minter
2015-10-23  6:02   ` kbuild test robot
2015-10-23  5:03 ` [PATCH V4 20/29] mn10300: Defer PCI " Matthew Minter
2015-10-23  5:03 ` [PATCH V4 21/29] mn10300: Remove pcibios_enable_device function Matthew Minter
2015-10-23  5:03 ` Matthew Minter [this message]
2015-10-23  5:03 ` [PATCH V4 23/29] tile: pci: Defer IRQ assignment to device enable time Matthew Minter
2015-10-23  5:34   ` kbuild test robot
2015-10-23  5:03 ` [PATCH V4 24/29] unicore32/PCI: " Matthew Minter
2015-10-23  5:03 ` [PATCH V4 25/29] PCI: Update pci-versatile to use IRQ deferred assignment Matthew Minter
2015-10-23  5:03 ` [PATCH V4 26/29] PCI: Update pcie-iproc to use IRQ deffered assignment Matthew Minter
2015-10-23  5:04 ` [PATCH V4 27/29] PCI: Update pci-host-generic " Matthew Minter
2015-10-23  9:40   ` kbuild test robot
2015-10-23  5:04 ` [PATCH V4 28/29] of/pci: Fix comment for pci_fixup_irqs changing to pci_assign_irq Matthew Minter
2016-01-13 11:25   ` Lorenzo Pieralisi
2015-10-23  5:04 ` [PATCH V4 29/29] PCI: Remove pci_fixup_irqs function Matthew Minter
2015-12-07 17:32 ` [PATCH V4] Delay allocation of PCI device IRQs from boot time until bus scan time to fix PCI hotplugging Bjorn Helgaas
2015-12-18 21:54   ` Christopher Covington
2015-12-19 11:50     ` Matthew Minter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445576642-29624-23-git-send-email-matt@masarand.com \
    --to=matt@masarand.com \
    --cc=Liviu.Dudau@arm.com \
    --cc=bhelgaas@google.com \
    --cc=ddaney@caviumnetworks.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).